{wrapfigure} is an environment defined by the`wrapfig` package that allows text to flow around floats.

learn more… | top users | synonyms

4
votes
2answers
50 views

cannot make a wrapfigure

Does anyone know why i cannot make text around this wrapfigure ? i have tries to move the image but with no success to make the text around the image here the latex code: \documentclass[apaper,...
5
votes
2answers
35 views

How to place a wrapfigure on top of the page?

Consider the following code \subsection{Seleção da Dosagem Ótima} % \begin{wrapfigure}{R}{0.5\textwidth} \centering \captionsetup{justification=centering} \captionsetup{width=0.45\...
2
votes
0answers
60 views

Moving a subsection directly under an image using wrapfigure, how to remove the white space

I have read and tried solutions from various answers, but I haven't reached a solution to my problem; In my document I have an image on the left side, and an equation right next to the image on the ...
0
votes
1answer
39 views

Two consecutive wrapfigure images

How can I display two consecutive images on the right of the page, with the second appearing below the first? At present the first does not float at all, only the second does. I do not want to place ...
2
votes
1answer
756 views

Problem with wrapfigure and line breaks in the text

How can I fix this problem? The text of the second paragraph overwrites the figure and doesn't contain line breaks. \documentclass[parskip=half]{scrbook} \usepackage[english]{babel} \usepackage{...
1
vote
2answers
448 views

Wrap figure moves all the following text

Eventhough I have found few similar question I still cannot handle my problem. Need help. I want simply to place couple of lines on the right from my picture and begin new page with new section ...
0
votes
0answers
24 views

wrapfigure in a newtheorem environment

At this hint a method is pointed out to add a wrapfigure into a newtheorem environement. But that only seems to work with one wrapfigure. Is there a good way to insert a second wrapfigure?
1
vote
1answer
64 views

Wrapfig: No image after section

I am trying to figure out why I am getting no image and no error message in the log when using wrapfigure environment right after a sectioning command. The only way how I was able to force wrapfigure ...
42
votes
4answers
8k views

Will it ever be possible to use wrapfig with an enumerate or itemize environment?

wrapfig is incompatible with the enumerate and itemize environments. Is there a typographical reason not to wrap a list around a figure or is it a technical limitation of LaTeX? If it is a technical ...
2
votes
1answer
73 views

How to find the right number of lines?

I am writting some commands for inserting wrapped pictures. see that topic: How to wrap pictures in lists in theorems with formulas? Now I see that \begin{wrapfigure}...\end{wrapfigure} without ...
1
vote
1answer
19 views

How to fix vertical alignment of a minipage with a wrapfigure inside

In this example \documentclass{article} \usepackage{graphicx} \usepackage{lipsum} \usepackage{wrapfig} \begin{document} foo \begin{minipage}[t]{.9\linewidth} \lipsum[1] \...
20
votes
0answers
246 views

How can I make a custom environment that wraps listings? [duplicate]

Thanks to this answer, I know it is possible to float and wrap text around a listing. I would like to setup an environment for mini-code snippets that always floats and wraps the same way. I can ...
1
vote
0answers
34 views

Drawing multiple box plots from a file

I've got data in the following format n lw lq m uq uw 50 200 209 237 327 569 100 376 379 386 390 391 150 ... ... Where lw = lower whisker, lq = lower quartile, etc. I want to plot each box against ...
8
votes
2answers
4k views

wrapfigure problem: text over figure

I am a relatively new LaTeX user, so bear with me. I am using wrapfigure to present figures in a grant application (read: space is at a premium). All of a sudden, one of my figures is being ...
3
votes
1answer
52 views

Why can't wrapfig indent tabular* and can it be done?

An MWE showing the behaviour of wrapfig next to a list of short tables below. \documentclass{article} \usepackage[]{wrapfig} \usepackage[]{booktabs} \usepackage[]{blindtext} \setlength{\parindent}{...
0
votes
0answers
38 views

Is it possible to wrap a table around another table (or any float/text/minipage)?

Is it possible to wrap a table around another table (or any float/text/minipage)? I.e. the table width is adjusted so another thing indents the table. Imagine text wrapping a float, but instead of ...
2
votes
0answers
20 views

What is exact size of figure from Matlab to add in latex

I want to add some results (graphs) from Matlab in(.eps format).I dnt know what should be the size of the figures. Every time I add figure in latex my supervisor says change the size. Does any one ...
1
vote
1answer
44 views

How to either: wrap image in text or place image at specific location

I am very new to Latex and I am struggling to place a picture of me at the top of my resume. I did my best to make a minimal working example since I have seen that it is appreciated while looking for ...
0
votes
1answer
102 views

How can I use tikzpicture and wrapfigure and get text around the picture on a beamer frame

I've tried the following, but now the last lines are not on the page anymore.... I want to be able to have text around a picture (hence the wrapfigure), have the picture scaled, and use tikz (code ...
3
votes
1answer
62 views

Latex: wrap text arround a box with quotes

The code below represents the canvas of my thesis report. I have a problem with quotation position. \documentclass[a4paper,11pt, oldfontcommands]{memoir} \usepackage[T1]{fontenc} \usepackage[utf8]{...
2
votes
2answers
75 views

I need to source my images. Is there any way to do that?

I have a plenty of figures in my thesis and I need to add internet sources to them at the end of my work. How can I make it happen? EDIT: I do not have a list of figures. I use just large captions. ...
4
votes
3answers
64 views

Multiple figures in tabular format

I know this issue has been discussed in a lot of other topics, but I couldn't make them work, and my issue is kind of special because it requires text and multiple images in each column, and I want to ...
3
votes
3answers
54 views

Wrap text around figure on whole page

In my document I have a huge data flow graph that is exactly one page high. Since it is not very wide I'd like to have it on the left/right side of one page while having normal text on the other side. ...
1
vote
3answers
52 views

Figure inside a table, problem formatting text

I having some trouble with the text not beeing at the top inside the tabular when i add the image to the column beside it... I've tried to use wrapfigure, mixing with multirows and multicolumns and I'...
0
votes
0answers
83 views

how to use figures in a right way in IEEE conference [duplicate]

I have a problem in latex and I have searched to solve it but I have got no solution for my problem which is as follows: when I put figures it does not appear in the right place, it often appears in ...
36
votes
2answers
74k views

Handling of wrapfig pictures in LaTeX

Is there an way to avoid this behavior of the pictures This is have is wrap the picture: \begin{wrapfigure}{r}{0.5\textwidth} \vspace{-20pt} \begin{center} \includegraphics[width=0.4\...
0
votes
1answer
38 views

Distinguish \columnsep for twocolumn and wrapfigure

As far as I understand, the length \columnsep is used both for the gap between columns in a twocolumn document and for the space around a wrapfigure. How can I change the space between columns, but ...
2
votes
1answer
103 views

What caused different output with wrapfigure?

I'm currently writing a Beginner's Guide to LaTeX and I tried this code: \documentclass{scrreprt} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage{graphicx} \usepackage{wrapfig} \...
0
votes
2answers
126 views

wrapfigure at the bottom - no white space below wrapfigure

I want to place some figures at the left or right side of my book resulting into a reduced column width for the text. So I am using wrapfigure environment with number of narrow lines of 40. By this ...
4
votes
1answer
61 views

Wrapfigure never ends

I'll be honest and say I don't have a whole lot of experience with LaTeX. That being said, I've been through all the related posts on this topic and I can't seem to get anything to work. I'm trying to ...
10
votes
2answers
24k views

Text next to image

I have a problem to get the following result in LaTeX: The figure is not something I want to do with tikz, but I want to use \includegraphics{figure1.png}. Can someone help me to get this?
0
votes
0answers
47 views

knitr: How to wrap text around a table generated around code chunk?

I would like to wrap text around a table generated by a knitr code chunk. I found a solution for a regular table here, but I didn't manage to re-implement it for a table generated by a code chunk. For ...
1
vote
1answer
32 views

Wrap figure changes right spacing

I'm using moderncv and I'd like to add a note at the end of last page. I added it using \vspace but somehow this sentence has huge right spacing, as you can see from the picture here. In my document ...
1
vote
0answers
99 views

wrapfig: overlap with text after equation in next paragraph

In the following MWE, the text below the equation overlap with the wrapfigure. If I remove the equation, it works. \documentclass[]{article} \usepackage{wrapfig,lipsum} \begin{document} \begin{...
0
votes
1answer
44 views

wrapfig not breaking lines properly in beamer

I have a very simple situation where wrapfig is not correctly choosing line break positions correctly. Here is the MWE: \documentclass{beamer} \usepackage{wrapfig} \begin{document} \begin{frame} \...
4
votes
1answer
54 views

possible bug with wrapfig (just before section starts)

I appear to have come across a bug using wrapfig. If I use a wrapfig environment immediately before a \section{...} command, then I get some bad behaviour, which appears to go away if I add some text ...
1
vote
0answers
32 views

creating pagestyle with one column only for figures

I have a one-column pagestyle. But some of my pages should have a tighter text column with 1 or 2 figure on the outer side. How can I realize such a design in latex? I tried with wrapfigure and ...
3
votes
1answer
38 views

wrapfigure and curly braces

\documentclass{article} \usepackage{wrapfig} \begin{document} \begin{wrapfigure}{r}{3cm} \centering \rule{3cm}{3cm} \end{wrapfigure} g,sd; agmgts bsgfs shgsnhg {\bf snhbfx}...
2
votes
2answers
40 views

Minipages parallel with included image

Bonjour! I created two columns with information using \itemize in two different \minipage environments. Now I want to include an image parallel to these two 'columns'. I tried to include the (...
1
vote
0answers
27 views

wrapfigure.sty failing to produce wrapping in indented paragraph

I wanted to have text wrapping around a figure, so I wrote the following (this uses pst-jtree.sty which is just a collection of macros over pstricks, very useful for linguists of my ilk, largely ...
2
votes
1answer
107 views

wrapfig - Make wrapped image respect margins and page ends

I need to insert images wrapped in text. wrapfig obviously comes to mind. The problem is the wrapped figure, by default, ignores margins and even page ends. I mean, if I put the image less than its ...
0
votes
0answers
27 views

Text wrapping in resume class

I am trying to create my resume using resume class. i want to have the text in my career profile wrapped around my picture. Unfortunately when i try to run my code the picture is positioned on the far ...
0
votes
0answers
23 views

Elongating a PDF file to several latex Pages

I have a rare problem to ask that I haven't been able to find a solution too, due to its peculiarity... My problem that I am facing is as follows: I have made a gantt chart on Microsoft visio 2013, ...
1
vote
3answers
68 views

Wrapfig doesn't detect new page

MWE: \documentclass[a4paper]{article} \usepackage{mwe} \usepackage{wrapfig} \usepackage{blindtext} \begin{document} \blindtext \blindtext \blindtext \blindtext \begin{wrapfigure}{l}{0.5\textwidth}...
2
votes
1answer
47 views

wrapfig not wrapping as required

Why isn't the text wrapping correctly here? code: \documentclass{article} \usepackage{tikz,amsmath,wrapfig,lipsum} \setlength{\parindent}{0cm} \setlength{\intextsep}{0pt} \begin{document} \...
5
votes
3answers
94 views

wrapfigure environment vspace above figure

I am trying to use wrapfigure to place a figure within my document and I have noticed something odd occurring. Code: \documentclass{article} \usepackage{lipsum,tikz,wrapfig} \begin{document} \...
1
vote
1answer
101 views

Wrap centered text around wrapfigure

I am making a cv and I am using the Awesome CV template from ShareLatex for this. The template has a command \makecvheader which puts the previously initialized data nicely on the page. In the .cls ...
2
votes
1answer
56 views

Wrapfigure empty space under image

I am trying to add image to page, on the top right corner that contains couple of lists. I'm using wrapfigure package therefore i want text below image. However when image is inserted where i want, ...
1
vote
2answers
51 views

wrapfig: cannot restart from beginning, vspace doesn't work

Problems with wrapfig seems to never end. I want to put a figure on the left and write text on the right. This text doesn't cover all the figure height. Then I do a vspace and starts to write AFTER ...
1
vote
1answer
64 views

Wrapping images on different pages

I have some text and I would like to include some images on top of page 2 and page 4 and on the bottom of page 7. I tried the code below but I could not get the right formatting. I would be grateful ...