0
votes
0answers
4 views

The commands for bidi package do not autocomplete?

I have installed the bidi package on my Texlive 2014 and It works well, however the auto-complete on my TeXstudio (version 2.9.4) do not work for the bidi package's commands. I checked the configure ...
1
vote
0answers
6 views

\includegraphics takes the wrong image if no extension is specified

The following code incorrectly displays the image with the letter B in the header of the first page, even though I included the image with the letter A. \documentclass{article} ...
0
votes
0answers
7 views

How to (if possible) create a document like this? (indexing, whole document as well as sperate document)

I am not sure if there are packages which can already do this. But I will try my best to describe what exactly I want to do. I have keywords like 1, 1.1, 1.2, 1.3, 2, 2.1, 2.2, 2.3 as well as A,B,C,D ...
0
votes
0answers
4 views

How to remove only year from a reference?

While I am citing references, I have some reference (web addresses) that I need to refer. They dont have year of publication. So, when I give year={} in bibtex, it is displaying () in the place of ...
0
votes
0answers
9 views

Linenumbering problem

When I am using line numbering I am getting to this problem: Basically the command for line numbering is perfectly working until page 8 from 11 of my document. It seems that from this point the ...
0
votes
0answers
14 views

Turn a warning (“Unused label”) into an error

The following example, a follow-up of Give an error if I dont reference a label, generates a warning: \documentclass{article} \usepackage{amsmath} \usepackage{refcheck} \begin{document} ...
0
votes
0answers
15 views

What is the use of \begin{table*} … \end{table*}?

I used table* in my text file to include a caption across the 2 columns in a IEEE format file, But the table now goes to a new page. Any ways to mitigate this problem ??
0
votes
1answer
18 views

How can i write the text show in red rectangle?

How can i write the text show in red rectangle?
2
votes
2answers
16 views

How to center enumerate?

I have following code \documentclass[8pt]{article} \usepackage{enumerate} \usepackage{multicol} \usepackage[a4paper]{geometry} \geometry{top=1.5cm, bottom=3cm, left=2cm, right=2cm} ...
2
votes
1answer
18 views

Change name of “Figure” and “References” in ACM SIG alternate

I want to change the words Figure and References into another language, using ACM SIG alternate template. Any ideas how I can achieve this? \documentclass{sig-alternate} \usepackage[utf8]{inputenc} ...
0
votes
0answers
27 views

Two-column note

I have to write a thesis and I want to use Latex but I don't know how to do this thing: I want to write a one-column text in the top of the document, and I want to create a table with 2 column that ...
5
votes
1answer
41 views

How to draw stacks of blocks in tikz?

I am preparing a presentation on Python Scientific Computing and trying to draw a block diagram showing the software stack that are used in this environment. I came up with a good output, but since I ...
0
votes
1answer
13 views

Data points not shown when using TikZ datavisualization in beamer

When I try to implement the first example of section 75.2 from the TikZ 3.0.0 manual within beamer I don't get any data points. \documentclass{beamer} \usepackage{tikz} ...
0
votes
0answers
8 views

linenumber with widetext package

I have looking for widetext with twocolumn mode with linenumber package. Please find the my MWE below: \documentclass[twocolumn]{article} \usepackage{lipsum,widetext} \usepackage[switch]{lineno} ...
1
vote
1answer
59 views

What is the font used in the main part of this book? [duplicate]

This book seems to be compiled via latex. But I think the normal amsfont is "thinner" than the font used in the main part of the book. I thus wonder what font is used in the book?
3
votes
0answers
20 views

Hyperlink a rotated nodepart

I would like to have the entire node part a link. But, it seems that once you rotate, hyperref has issues. The reference below say to place the rotated content in the hyperlink, but not sure how to do ...
2
votes
1answer
28 views

Incompatibilities between fourier and other mathfont

When I combine fourier and other mathfont, there are some symbols not dislayed correctly. The operator "+" disappeared and the \left( \right) doesn't word. Is there any solution that I still can use ...
2
votes
1answer
31 views

vertical and horizontal line in a matrix

I want to create a bmatrix on the right \documentclass[10pt,a4paper]{article} \usepackage[english]{babel} \usepackage{amsmath} \begin{document} \begin{equation} \begin{bmatrix}[c|c] _B[T]_B ...
3
votes
1answer
45 views

trigonometric tikz

I modified someone's code and get the trigonometric graph I want. But I wonder if there is an easier/elegant code than this. Specifically, I'd like to have an automatic node setting instead of ...
4
votes
2answers
73 views

Why does Tikz ignore my variable increment?

I am at wits end with a simple problem (I am just learning Tikz). I am trying to use tikzmath to increment a variable. However, the output of my code is 1 every time the loop executes. Here is the ...
0
votes
0answers
23 views

Typeset Chinese Calligraphy Characters

Does LaTeX allow me to typeset Chinese calligraphy characters such as the following? If so, how?
4
votes
1answer
23 views

Minimize effort separate pdf and single pdf versions; ref and url issues

I want to create LaTeX content which consists of many sections. I will either typeset all of the sections together to get one PDF or typeset each one separately. If they are typeset together, then I ...
0
votes
0answers
19 views

conTeXt Mkiv: the number of parameters can not be more than 9?

For testing, I have a definition: \define[9]\DEFINETEST{#1,#2,#3,#4,#5,#6,#7,#8,#9} context test can work fine, when I modify the above into: \define[10]\DEFINETEST{#1,#2,#3,#4,#5,#6,#7,#8,#9,#10} ...
3
votes
1answer
42 views

Combine 2 math font together

I want to use pxfonts package as the main math font in my document. But I also need fourier package to use \wideOarc command. Is there any solution to combine those math fonts? Thank a lot :) ...
0
votes
0answers
19 views

Can't Uninstall or start tex live manager after update

My question is similar to this one however I have tried installing strawberry perl and since the problem arose after an update not during an installation. I am running a windows 64bit machine with a ...
3
votes
1answer
29 views

How to number subsections continuously within a chapter?

How to fix numbering? Here is a minimal example. I think the problem is self-explanatory. \documentclass{report} \usepackage[explicit]{titlesec} \usepackage{etoolbox} \makeatletter ...
1
vote
1answer
27 views

Biblatex-apa not replacing ampersand for citations and references with Spanish options

I have read that the spanish-apa.lbx file contains the command \setcounter{smartand}{0} to prevent the ampersand from showing up and uses y instead. However, I can't seem to manage to get this right ...
3
votes
2answers
27 views

\nopagebreak after a center environment

I have the following code for a Theater play. Sometime the page breaks just after the name of a character. I would like to avoid that. I would be good if I could do it only by modifying the command ...
1
vote
0answers
31 views

How to recover the content of my .tex file with Texstudio, windows 8! [on hold]

I was writing a dissertation with LaTeX tonight and just after my last saving my PC crashed and turned off. After restarting my .tex file it was all white! But, I can move the cursor within... I used ...
1
vote
0answers
23 views

How to recover a corrupted texfile with Texstudio [on hold]

I have a friend who has to give a LaTeX document in a few hours. But unfortunately, his computer shut down without preventing and as result, he is not able to read the .tex file again. The file looks ...
6
votes
1answer
48 views

Using ordinal numbers in chapter headings (e.g. First chapter)

I'm writing a document using the book class. The normal chapter headings are of the form (for the first chapter in the book): Chapter 1 <Name of first chapter> Instead I would like it ...
10
votes
2answers
126 views

Is it possible to view the latex code after Lua expansion is made?

When using Lua code inside Latex file, where Lua code sends to Tex Latex code to insert into the document at the location the lua code is made, it will be useful to look at the content of Latex file ...
1
vote
0answers
23 views

conTeXt: What should I do for compile a tex file when I have two different types of modules?

For resolving my previous question , according to [AboAmmar's answer] (http://tex.stackexchange.com/a/253658/81323), I must create a separate file m-resume.tex and use command texexec cv.tex to ...
0
votes
0answers
17 views

\paragraph{} sectioning with eledmac/eledpar

Maybe just a short question: In a layout with parallel pages using eledpar and eledmac I try to use the \paragraph sectioning command (and KOMA-Script), which causes the layout going off perfect sync. ...
0
votes
1answer
12 views

Doublespacing for contents but not for the space between the header and the contents

I'm using \onehalfspacing for my entire document, except for the table of contents for which I use \doublespacing. However, the space between the heading "Contents" and the first line of it is also ...
2
votes
0answers
14 views

Format note field given date according to the given style

I have the following entry in my biblio.bib: @article{author1:2015, author={author1 and author2, title={Something good}, journal={A very good journal}, year=2015, month=jun, volume=26, ...
10
votes
5answers
229 views

Reducing fraction using LaTeX 3

Consider the following: \documentclass{article} \usepackage{amsmath} \begin{document} \noindent Can I make \LaTeX{} reduce a fraction automatically?\\[\baselineskip] For example, I would like the ...
0
votes
0answers
34 views

the \usepackage{parskip} and \setlength{\parindent}{0pt} could not solve my problem of indentation

in one of the chapters of my thesis , after some figures, the texts starts with some Identation and I can not correct it with none of the above and other questions that were similar didnt help here ...
2
votes
0answers
16 views

How to use luacode* to eliminate need to escape “\”?

I am struggling trying to understand how to actually use luacode* environment, so that I do not have to escape all the \ characters in the strings that Lua builds before sending to Tex. The whole ...
3
votes
1answer
16 views

memoir: subcaptions outside float

For figures outside of caption memoir define for example \newfixedcaption{\figcaption}{figure} Is there a way to similarly define fixed subcaption? That it can be used in the following MWE: ...
3
votes
1answer
28 views

my centering command does not work! why?

I am going to plot a bar histogram using the following command: \documentclass[a4paper]{report}‎ \usepackage{pgfplots}‎ \pgfplotsset{compat=newest}‎ \begin{document}‎ \begin{tikzpicture}‎ \centering‎ ...
2
votes
1answer
25 views

Using titlesec with mwrep class

I use mwrep class in my document and try to customize section titles with titlesec. It works OK for sections and subsections but it has no effect for chapters. Here I read that "The mwrep class uses ...
2
votes
1answer
27 views

BibLaTex cite style: prenote [number] postnote

I would like to see this output for \cite[see][1]{Key}, e.g.: "see [2], p. 1". That means like style=numeric, but only the number should be wrapped in square brackets, but not the rest. More general: ...
4
votes
0answers
38 views

How can I force the pin angle in a TikZ data visualization?

Please note that I am not using the pin option of a node as in How can I force TikZ pin angle? and TikZ node pin angle in 2D plot, but am instead using the pin in data option in a TikZ data ...
0
votes
0answers
12 views

JACS communication: Author information section does not appear

I'm trying to write a publication with the achemso package, for a submission to JACS, communication format. I don't know if it's the expected behaviour, but I found no way to create a section "Author ...
1
vote
0answers
36 views

How can I rotate some pages keeping the same header/footer sequence as the other pages? [duplicate]

Original text Estoy intentando rotar hojas específicas de cuadros o imágenes un poco anchas para lo cual algunas hojas deben estar rotadas para facilitar la lectura. Translation by Gonzalo Medina ...
0
votes
0answers
24 views

Trim size as fundamental TeX value

What are the fundamental TeX length names, corresponding to trim size and offsets? I already know that \pdfpagewidth and \pdfpageheight will grab enough information to calculate the PDF MediaBox (in ...
3
votes
3answers
49 views

vco lowpass etc. don't work. Circuitikz

How come that circuitikz does not give me the vco I intend to build? See this code: \documentclass[tikz, border=10pt, 12pt]{standalone} \usepackage{circuitikz} \usepackage{verbatim} ...
1
vote
1answer
36 views

Table alignment and text overflow

I have problems with the following code: \documentclass[a4paper,10pt]{article} \usepackage{multirow} \usepackage{multicol} \usepackage{array} \usepackage{booktabs} \begin{document} \pagestyle{empty} ...
3
votes
0answers
28 views

problem with \ProcessKeysOptions / l3keys2e in texlive 2015

In my example the keys seems not to be processed ... here is file test.cls : \NeedsTeXFormat{LaTeX2e}[2001/06/01] \RequirePackage{l3keys2e} \ProvidesExplClass {test} {2013/12/23} {1.0} {Ceci est ma ...

15 30 50 per page