0
votes
0answers
20 views

Add a space before a section but not before the first one

I'm trying to define my own subsection-like command by using this: \newcounter{oef} \setcounter{oef}{1} \newcommand{\oef}{{\medskip\large\bf Oefening \theoef\par\medskip}} So, when I use this: ...
0
votes
0answers
22 views

font size with tikzset and tikzscale not working

I want to set the font family and size for all pgf/tikz figures in my preamble. But when I use tikzscale, then this is ignored. Can anyone help? \documentclass[a4paper,12pt]{scrbook} ...
0
votes
1answer
19 views

why does texstudio show “\linespread” as an unrecognized command?

besides \linespread, the \center also is told an unrecognized command. I don't know what's wrong with TeXStudio. Can any one help me?
1
vote
1answer
18 views

Automatic report generation from bibtex

I like to benefit from my existing myarticles.bib file to create a different report automatically something like in the following picture. Different Ideas I considered First I thought about ...
0
votes
0answers
27 views

Page geometry and margins handling

I'm creating a poster using baposter and the page margins aren't behaving in the way I would like for a poster, i.e. there is some asymmetry in the left and right margins that I can't remove. In the ...
0
votes
0answers
25 views

Texlive 2014 on Ubuntu 14.04: Font WebOMintsGD not found [duplicate]

I upgraded to Texlive 2014 on Unbutu 14.04 and after this I'm getting this error (for some files): !pdfTeX error: pdflatex (file WebOMintsGD): Font WebOMintsGD not found I would highly ...
10
votes
2answers
497 views

Does spaces in $xy=1$ have differences between $x y = 1$?

Which way is more correct? I don't see any differences, but maybe I something missed?
0
votes
1answer
16 views

How to use subsubsection in “moderncv” class?

How to put subsubsection in "moderncv" class? Only upto subsection is working in my script.
2
votes
1answer
34 views

Problem in writing the equation: missing delimiter

I tried a lot but unable to solve this equation. \documentclass{article} \usepackage{booktabs} \usepackage{multirow} \usepackage{amsmath} \usepackage{amsfonts} \usepackage{amssymb} \begin{document} ...
6
votes
1answer
62 views

Equivalent to “shorten <=” for intermediate points

Halo everybody, I try to plot a data set using tikz & pgf. I want that the points in the plot are connected, but the line shouldn't touch the points. I can achieve this for the first and the last ...
1
vote
0answers
17 views

\hypersetup command from hyperref package not working with auto-pst-pdf

I need to use the auto-pst-pdf package in a large class file of my own. I've found out that, under pdfLaTeX, the following MWE compiles to a pdf that does not include the metadata provided by the ...
6
votes
1answer
92 views

How to generate a “named destination” in PDF?

According to the Evince help, one can open a PDF at the location of a "named destination": SYNTAX evince [--help] [--page-label=PAGE | --page-index=NUM‐ BER | --named-dest=DEST] ...
2
votes
0answers
34 views

Why is pdflatex producing dvi output?

I'm new to LaTeX and I'm sure I'm missing something obvious. I put the following into test.tex: \documentclass{article} \author{Me} \title{My Test} \begin{document} Test. \end{document} And then I ...
0
votes
0answers
23 views

How do I create a tikz picture overlay that does not disturb the vertical placement of other text? [duplicate]

I'm having difficulty getting a tikzpicture to not cause a disruption in the vertical placement of material outside of the environment. Here's a MWE that illustrates the problem. ...
0
votes
0answers
17 views

Nesting wrapped textboxes

for formmating a piece of poetry, I need to nest a textbox inside another one, and that the outer text wrapps both left and right of the inner textbox, as it is to be in the center, I would like to do ...
0
votes
0answers
33 views

Given this preamble, what font would be used?

Given the following code sample, what font would LaTeX actually use? I've looked in various places, but the help on fonts seems too cunning to be understood. This is definitely a different question ...
0
votes
0answers
12 views

Generating an IEEE bibliography with book series in parentheses using BibTeX and IEEEtran

The IEEE citation reference and style manual both list the following two bibliography examples for books: [4] M. Abramowitz and I. A. Stegun, Eds., Handbook of Mathematical Functions (Applied ...
0
votes
1answer
14 views

How to make letter with some overhead [duplicate]

How do I make the following in a TeX file? I try a lot of things but still don't work.
1
vote
1answer
15 views

Getting the \currentsection and \currentsubsection in memoir

As you know in memoir there's no easy way to get the current section and/or subsection, you can only get the \currenttitle, which tells you the header of the last sectioning command. That's a ...
8
votes
3answers
358 views

How can I create a rectangle symbol?

I need to represent symmetries of a a rectangle as a set, and in my text book they do so by using the following notation S(SYMBOL-THAT-LOOKS-LIKE-A-RECTANGLE) I searched everywhere, tried ...
0
votes
0answers
11 views

harvard bibtex: How to upper case the authors of the references?

I have been using the harvard bibtex with the following configuration: \usepackage{harvard} \citationmode{abbr} \citationstyle{dcu} \bibliographystyle{dcu} Database: @BOOK{Campbell(1996), AUTHOR ...
-2
votes
1answer
38 views

Change in font size from slide to slide

Is it possible, that one of my slide in beamer is 11 pt and I want 10 pt font in other slide?
6
votes
2answers
178 views

Using many typewriter fonts in a single document

Reading topics about monospaced fonts, I found out that changing \tt font for the document requires replacing only one line in the preambule. For example, I only change the commented line ...
4
votes
1answer
55 views

Graph doesn't stay within grid

I've plotted two simple functions in Latex using tikz. It looks like this: As you can see, the curve doesn't stay within its grid. How can I fix this? This is my code. I'm using documentclass ...
2
votes
0answers
23 views

Two bibliographies

I have already written my thesis in LaTeX using the standard bibliography option and in the text they are cited with 1, 2 and so on. However, now I need to separate 11 articles from my original ...
1
vote
0answers
46 views

MikTeX error: Invalid control sequence

I've recently installed MikTeX 2.9 for Windows 7, 64. After installation I try to compile an IEEE template downloaded from their website. I get the following error: miktex-pdftex.exe: Invalid control ...
1
vote
0answers
14 views

Vertical Centering [duplicate]

The following LaTeX code produces a table with one row and three columns. Each cell contains two short words word-wrapped so that one name is above the other. A design requirement of this table is the ...
1
vote
0answers
37 views

Printing more than one book at a time

Can small number of pages per book allow for printing multiple books on a press run, or does each book have to stand on its own as an independent job?
1
vote
1answer
17 views

Using Cleveref with LIPICs documentclass fails for theorem environments sharing the same counter

I want theorems and lemmas to be referred to in the text as "Theorem 1" and "Corollary 2", sharing the same counter. This works fine when I'm using the normal article documentclass, but fails when ...
2
votes
1answer
22 views

Text-Align inside Caption

I've some problem with formatting my figure captions form my thesis. First i'd like to describe my final result. Caption above: align left Caption below - first row (source): align right Caption ...
0
votes
0answers
27 views

Logo creation in References [duplicate]

How to create this kind of logo in references? I have done with other two logos in which picture of book and document is made , but got stuck here
1
vote
1answer
42 views

marginpar image from top of the image height

I have the below boxed environment. The image should place in the marginpar width. When my environment is going long the image should automatically increase upto my enviroment, when is going to low it ...
4
votes
3answers
192 views

How to elongate down arrow?

\downarrow command is available in directory but it has fixed length. How can I elongate its length?
4
votes
1answer
37 views

Mutiple composable styles for a tikz node using “append after command”

I'm trying to build a little drawing library in which each node will have the same base, but can be annotated with various options which will cause extra things to be drawn in/on the node. I'm ...
1
vote
2answers
107 views

Writing Wikipedia logo in latex

How to write this logo in Latex? I am working on it, but could not get it.
2
votes
1answer
60 views

Matrix environments not being typeset

Why does LaTeX seem to have a problem with the matrix environment, and why does it tell me something about \hbox badness 10000? \documentclass[12pt,fleqn]{article} \usepackage[utf8]{inputenc} ...
4
votes
3answers
45 views

Using horizontal fill to center doesn't work

I want to use the symbol for logical disjunction (the 'V'), but I want this to be in the center of the two 'x = ..'. Right now it's like this: This is the code I'm using: \paragraph{a)} $ ...
2
votes
2answers
37 views

Align table by dot - Not with siunitx

I'm trying to align numbers in a table by the dots. I know of one method using the siunitx package. But I can't load the package. siunitx error: "incompatible-package"! Package 'SIunits' ...
5
votes
2answers
83 views

Purpose of AtEndDocument{\def}

I am currently researching how to generate a recompilation warning from Latex if somthing in the auxfile changes and found this solution. However I find it rather confusing, it uses: ...
3
votes
1answer
29 views

inline figure with caption in actual figure bottom

I'm expecting the inline figure caption should print in actual figure bottom. But inline figure is not supporting caption and how to print the caption is withing bottom of the figure. my MWE is: ...
0
votes
0answers
13 views

Reference table rows by automatic counter with a unique first row

I want to use the method that are represented here, but I want a unique first row for describe the content in each column, like this : . How can i achieve this?
5
votes
2answers
169 views

Element of or Equal To Symbol

I would like to typeset a symbol that means "element of or equal to," which is just the element symbol with a short horizontal line underneath. I tried $\underline{\in}$, but that makes the underline ...
8
votes
2answers
111 views

Replace every backslash in a string with a forwardslash

I would like to replace every backslash \ inside a macro (string) with a forwardslash /. The macro is intended to contain a filename in Windows notation which should be replaced by a valid (La)TeX ...
3
votes
1answer
34 views

section head two environment with different size boxes

I have two arguments in section and how to print the second optional argument in the same boxes. How do increase the box width should be upto paperwidth. My MWE is: \documentclass{book} ...
3
votes
1answer
82 views

Complex function plot using TikZ or PGFPlots

I need to plot some steps of this approximation http://mathoverflow.net/a/27127 but don't know how to start.
0
votes
0answers
31 views

Italicize Book and conference titles and place titles of websites in quotation marks in Bibliography list

I am using isprs.bst, available here (http://www.isprs.org/documents/orangebook/LATEX/ISPRSguidelines_authors_latex.zip), and would like to have books in the list of references to appear in italics, ...
3
votes
1answer
30 views

Unexpected margin

I have the following code: \documentclass[11pt, a4paper]{article} \usepackage[margin=1cm]{geometry} \usepackage{showframe} \begin{document} \fbox {% \vbox to 4cm{\hbox to 4cm{\fbox{% ...
2
votes
2answers
67 views

How to combine a top-down and bottom-up binary tree in one picture?

I want to draw a binary tree like the one in the picture below. Unfortunately, I do not have any clue, whatsoever, on how to draw two trees from top and bottom to match their leaves. Any help would be ...
3
votes
3answers
93 views

How to get coordinates going from 0 to 1 in tikz image

I'm trying to create a cover page with a background image filling the entire page. On top of that in the lower third of the page should be a transparent rectangle going from side to side and on top of ...
1
vote
1answer
37 views

Fancyhdr: How to change from lower case Roman numbers to upper case Roman number the pagenumbering of the preamble?

I am using the book class and I need to change the numbering of the first pages from lower case Roman numbers to upper case Roman numbers. I am using something like this: \usepackage{fancyhdr} ...

15 30 50 per page