I would like to code a pages of notes that has the layout shown in the picture below. My question is the most efficient way to do this with LaTeX. I would think tikz with lots of nodes and edges, but I wonder if there is a more efficiently using tables within LaTeX.
You could just use minipages to break up the page into its components.
To automate the drawing, I used the collcell package to place a \tikzmark at the desired location and then draw the appropriate markers:
\documentclass{article}
\usepackage{showframe}
\usepackage{mathtools}
\usepackage{graphicx}
\usepackage{xcolor}
\usepackage{booktabs}
\usepackage{collcell}
\usepackage{calc}
\usepackage{tikz}
\usetikzlibrary{calc}
\newcommand*{\ExtraSpaceH}{0.3em}% Extra horizontal space for red cells
\newcommand*{\ExtraSpaceF}{0.1em}% Extra horizontal space for blue cells
\newcounter{MarkCounterH} % Counter for uniquefying the \tikzmarks
\newcounter{MarkCounterF}
\newcommand{\TikzMarkPrefix}{}
\newcommand{\SetTikzMarkPrefix}[1]{%
\setcounter{MarkCounterH}{0}%
\setcounter{MarkCounterF}{0}%
\xdef\TikzMarkPrefix{#1}%
}
\newcommand{\tikzmark}[1]{\tikz[overlay,remember picture] \node[baseline] (#1) {};}
\newcommand{\HalfShift}[1]{%
\smash{%
\raisebox{-1ex}{%
\hspace*{\ExtraSpaceH}%
\tikzmark{\TikzMarkPrefix-H-\arabic{MarkCounterH}}%
\color{red}%
\makebox[\widthof{$+99$}][r]{$#1$}%
}%
\stepcounter{MarkCounterH}%
}%
}
\newcommand{\FullShift}[1]{%
\smash{%
\tikzmark{\TikzMarkPrefix-F-\arabic{MarkCounterF}}%
\hspace*{\ExtraSpaceF}%
\color{blue}%
\makebox[\widthof{$+99$}][r]{$#1$}%
\stepcounter{MarkCounterF}%
}%
}
\newcommand{\ConnectRows}[3][]{%
\foreach \x in {1,...,\numexpr\arabic{MarkCounter#3}-1\relax} {%
\tikz[overlay,remember picture]
\draw [red, ultra thick, #1]
($(#2-#3-\x)+(-0.8em,+1.7ex)$) --
($(#2-#3-\x)+(-0.1em,0.6ex)$) --
($(#2-#3-\x)+(-0.8em,-0.5ex)$);
}%
}%
\newcommand{\DrawAxis}[1][]{%
\begin{tikzpicture}[overlay,remember picture]
\draw [#1]
($(current page.center)-(0.5\linewidth,0)$) --
($(current page.center)+(0.5\linewidth,0)$) ;
\draw [#1]
($(current page.center)-(0,0.506\textheight)$) --
($(current page.center)+(0,0.496\textheight)$);
\end{tikzpicture}%
}
\newcolumntype{F}{>{\collectcell\FullShift}{r}<{\endcollectcell}}
\newcolumntype{H}{>{\collectcell\HalfShift}{r}<{\endcollectcell}}
\newenvironment{MyMinipage}[2][t]{%
\begin{minipage}[#1][0.5\textheight]{0.47\linewidth}\centering%
\SetTikzMarkPrefix{#2}%
}{%
\end{minipage}%
}%
\begin{document}
\begin{MyMinipage}{Quadrant2}
$\begin{array}{c | c H}
\multicolumn{3}{c}{y=x} \\
\toprule
x & y & \multicolumn{1}{c}{\color{red}\Delta y}\\
\hline
0 & 0 & +1 \\
1 & 1 & +1 \\
2 & 2 & +1 \\
3 & 3 & +1 \\
4 & 4 & +1 \\
5 & 5 & +1 \\
6 & 6 \\
\bottomrule
\end{array}$\par
\ConnectRows{Quadrant2}{H}%
\end{MyMinipage}%
\hfill
\begin{MyMinipage}{Quadrant1}
$\begin{array}{c | c H F}
\multicolumn{4}{c}{y=x^2} \\
\toprule
x & y & \multicolumn{1}{c}{\color{red}\Delta y} & \multicolumn{1}{c}{\color{blue}\Delta^2 y}\\
\hline
0 & 0 & + 1 \\
1 & 1 & + 3 & +2\\
2 & 4 & + 5 & +2\\
3 & 9 & + 7 & +2\\
4 & 16 & + 9 & +2\\
5 & 25 & +11 & +2\\
6 & 36 \\
\bottomrule
\end{array}$\par
\ConnectRows[red]{Quadrant1}{H}%
\ConnectRows[blue]{Quadrant1}{F}%
\end{MyMinipage}%
%
\DrawAxis[thick, gray]
%
\begin{MyMinipage}{Quadrant3}
$\begin{array}{c | c H}
\multicolumn{3}{c}{y=x^3} \\
\toprule
\end{array}$
\end{MyMinipage}%
\hfill
\begin{MyMinipage}{Quadrant4}
$\begin{array}{c | c H}
\multicolumn{3}{c}{y=\sqrt{x}} \\
\toprule
\end{array}$
\end{MyMinipage}%
\end{document}
using a suitable loop it is possible to automatize the computations.
Nota bene: I have copied verbatim Peter Grill's answer, modifiying some things to get wider columns, but there is surely a better way to do these modifications.
I have noticed that the tables must have, it seems the same number of rows for the code from Peter Grill's answer to work correctly.
Compile at least twice.
\documentclass{article}
%\usepackage{showframe}
\usepackage{mathtools}
\usepackage{graphicx}
\usepackage{xcolor}
\usepackage{booktabs}
\usepackage{collcell}
\usepackage{calc}
\usepackage{tikz}
\usetikzlibrary{calc}
\usepackage{xinttools}% for \xintFor loop
\usepackage{xintexpr}% for computations, but xintexpr knows only sqrt beyond
% basic operations. On the other hand it computes
% (expandably) with
% exact precision and arbitrarily long numbers.
\newcommand*{\ExtraSpaceH}{0.3em}% Extra horizontal space for red cells
\newcommand*{\ExtraSpaceF}{0.1em}% Extra horizontal space for blue cells
\newcounter{MarkCounterH} % Counter for uniquefying the \tikzmarks
\newcounter{MarkCounterF}
\newcommand{\TikzMarkPrefix}{}
\newcommand{\SetTikzMarkPrefix}[1]{%
\setcounter{MarkCounterH}{0}%
\setcounter{MarkCounterF}{0}%
\xdef\TikzMarkPrefix{#1}%
}
\newcommand{\tikzmark}[1]{\tikz[overlay,remember picture] \node[baseline] (#1) {};}
\newcommand{\HalfShift}[1]{%
\smash{%
\raisebox{-1ex}{%
\hspace*{\ExtraSpaceH}%
\tikzmark{\TikzMarkPrefix-H-\arabic{MarkCounterH}}%
\color{red}%
\makebox[\widthof{$+99999$}][r]{$#1$}%
}%
\stepcounter{MarkCounterH}%
}%
}
\newcommand{\FullShift}[1]{%
\smash{%
\tikzmark{\TikzMarkPrefix-F-\arabic{MarkCounterF}}%
\hspace*{\ExtraSpaceF}%
\color{blue}%
\makebox[\widthof{$+99999$}][r]{$#1$}%
\stepcounter{MarkCounterF}%
}%
}
\newcommand{\ConnectRows}[3][]{%
\foreach \x in {1,...,\numexpr\arabic{MarkCounter#3}-1\relax} {%
\tikz[overlay,remember picture]
\draw [red, ultra thick, #1]
($(#2-#3-\x)+(-0.8em,+1.7ex)$) --
($(#2-#3-\x)+(-0.1em,0.6ex)$) --
($(#2-#3-\x)+(-0.8em,-0.5ex)$);
}%
}%
\newcommand{\DrawAxis}[1][]{%
\begin{tikzpicture}[overlay,remember picture]
\draw [#1]
($(current page.center)-(0.5\linewidth,0)$) --
($(current page.center)+(0.5\linewidth,0)$) ;
\draw [#1]
($(current page.center)-(0,0.506\textheight)$) --
($(current page.center)+(0,0.496\textheight)$);
\end{tikzpicture}%
}
\newcolumntype{F}{>{\collectcell\FullShift}{r}<{\endcollectcell}}
\newcolumntype{H}{>{\collectcell\HalfShift}{r}<{\endcollectcell}}
\newenvironment{MyMinipage}[2][t]{%
\begin{minipage}[#1][0.5\textheight]{0.47\linewidth}\centering%
\SetTikzMarkPrefix{#2}%
}{%
\end{minipage}%
}%
\begin{document}
\newcommand\Y[1]{(#1)}
\newcommand\DeltaOneY[1]{\Y{#1+1}-\Y{#1}}
\newcommand\DeltaTwoY[1]{\Y{#1+1}-2*\Y{#1}+\Y{#1-1}}
\begin{MyMinipage}{Quadrant2}
$\begin{array}{c | c H}
\multicolumn{3}{c}{y=x} \\
\toprule
x & y & \multicolumn{1}{r}{\color{red}\Delta y}\\
\hline
\xintFor* #1 in {\xintSeq {0}{17}}
\do { #1 & #1 &\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax}%
% \xinttheiiexpr as we know result and input are integers
% \temp is defined to avoid computing it twice
% but sign check and decision to add a + prefix
% could be left to \num of sinunitx package for example
\xintifSgn {\temp}{}{}{+}\temp \\}
18 & 18 \\
\bottomrule
\end{array}$\par
\ConnectRows{Quadrant2}{H}%
\end{MyMinipage}%
\hfill
\begin{MyMinipage}{Quadrant1}
\renewcommand\Y[1]{(#1)^2}%
$\begin{array}{c | c H F}
\multicolumn{4}{c}{y=x^2} \\
\toprule
x & y & \multicolumn{1}{r}{\color{red}\Delta y} & \multicolumn{1}{r}{\color{blue}\Delta^2 y}\\
\hline
0 & 0 & + 1 \\
\xintFor* #1 in {\xintSeq {1}{17}}
\do { #1 & \xinttheiiexpr \Y{#1}\relax
&\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp \\
}% end of row loop
18 & \xinttheiiexpr \Y{18}\relax \\
\bottomrule
\end{array}$\par
\ConnectRows[red]{Quadrant1}{H}%
\ConnectRows[blue]{Quadrant1}{F}%
\end{MyMinipage}%
%
\DrawAxis[thick, gray]
%
\begin{MyMinipage}{Quadrant3}
\renewcommand\Y[1]{(#1)^3}%
$\begin{array}{c | c H F}
\multicolumn{4}{c}{y=x^3} \\
\toprule
x & y & \multicolumn{1}{r}{\color{red}\Delta y} & \multicolumn{1}{r}{\color{blue}\Delta^2 y}\\
\hline
0 & 0 & + 1 \\
\xintFor* #1 in {\xintSeq {1}{17}}
\do { #1 & \xinttheiiexpr \Y{#1}\relax
&\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp \\
}% end of rowloop
18 & \xinttheiiexpr \Y{18}\relax \\
\bottomrule
\end{array}$\par
\ConnectRows[red]{Quadrant3}{H}%
\ConnectRows[blue]{Quadrant3}{F}%
\end{MyMinipage}%
\hfill
\begin{MyMinipage}{Quadrant4}
\renewcommand\Y[1]{sqrt(#1)}%
$\begin{array}{c | c H F}
\multicolumn{4}{c}{y=\sqrt{x}} \\
\toprule
x & y & \multicolumn{1}{r}{\color{red}\Delta y} & \multicolumn{1}{r}{\color{blue}\Delta^2 y}\\
\hline
0 & 0 & + 1 \\
\xintFor* #1 in {\xintSeq {1}{17}}
\do { #1 & \xinttheexpr round(\Y{#1},3)\relax
&\edef\temp{\xinttheexpr round(\DeltaOneY{#1},3)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaTwoY{#1},3)\relax }%
\xintifSgn {\temp}{}{}{+}\temp \\
}% end for row loop
18 & \xinttheexpr round(\Y{18},3)\relax \\
\bottomrule
\end{array}$\par
\ConnectRows[red]{Quadrant4}{H}%
\ConnectRows[blue]{Quadrant4}{F}%
\end{MyMinipage}%
\end{document}
Peter Grill to automatic computations of rows.
xintexpr should be with the math engine of your choice (expandability is not need here anyhow).
16 digits precision before rounding: it is not the first differences of the already rounded first differences (as one can guess from the last cell at the bottom right)
The code concentrated initially on a partially automatized creation of the successive rows, up to the fourth differences.
No TikZ is used, and in this update I go a bit a further emulating the look as in the Peter Grill's answer in defining column types with the help of LaTeX pictures, as extended by pict2e (all that just to get this right angle shape! \bm\rangle would have been almost as fine...)
I define a \connector macro: I would prefer to have it in a savebox hence compute it only once, but it seems I must do that at least for each used color. Laziness made me leave the code in its deplorable state which computes each time the picture anew. I went to some lengths to have nice vertical centering of things.
The first line with the column headers causes me some headache about where to put things: flush left, centered?
\documentclass{article}
\usepackage{graphicx}
\usepackage{color}
\usepackage{array}
\usepackage{booktabs}
\usepackage{xinttools}% for \xintFor loop
\usepackage{xintexpr}% for computations, but xintexpr knows only sqrt beyond
% basic operations. On the other hand it computes
% (expandably) with
% exact precision and arbitrarily long numbers.
\usepackage{pict2e}
\usepackage{picture}% to use dimensional units in LaTeX pictures
\newsavebox{\cellbox}
\newlength{\cellheight}
% The \Connector is computed each time, which is a waste.
% However I use various colors: do I need one save box per color ?
% \newsavebox{\connectbox}
% \newcommand\ResetConnectBox {%
% \sbox{\connectbox}{% etc
\newcommand\Connector {%
% unfortunately it seems one can not use TeX dimensions in polyline
\setlength{\unitlength}{1sp}%
\setlength{\cellheight}
{\dimexpr\arraystretch\ht\strutbox+\arraystretch\dp\strutbox\relax }%
\begin{picture}(\arraycolsep,\cellheight)
\linethickness{2pt}\roundjoin
\polyline
(0,\number\dimexpr0.9\cellheight\relax)
(\number\dimexpr \arraycolsep\relax,\number\dimexpr .5\cellheight\relax)
(0,\number\dimexpr .1\cellheight\relax)
\end{picture}%
\hspace{.5\arraycolsep}%
}
%% THIS IS FOR DRAWING THE CONNECTORS AND LOWERING THE VALUES
%% OF THE ODD SUCCESSIVE DIFFERENCES
\makeatletter
\newcolumntype{H}[1]{%
>{\begin{lrbox}{\cellbox}$\color{#1}}%
l%
<{$\end{lrbox}%
\smash{%
\raisebox{\dimexpr-\height+\fontdimen22\textfont2\relax}
{\makebox[0pt][r]{\color{#1}$\vcenter{\hbox{\Connector}}$}%
\usebox{\cellbox}}%
}}%
}
\newcolumntype{L}[1]{%
>{\begin{lrbox}{\cellbox}$\color{#1}}%
l%
<{$\end{lrbox}%
\makebox[0pt][r]{\color{#1}$\vcenter{\hbox{\Connector}}$}%
\usebox{\cellbox}}%
}
\makeatother
\newcommand\Y[1]{(#1)}
% successive difference of a function of an integer variable (step=1)
\newcommand\DeltaOneY[1]{\Y{#1+1}-\Y{#1}}
\newcommand\DeltaTwoY[1]{\Y{#1+1}-2*\Y{#1}+\Y{#1-1}}
\newcommand\DeltaThreeY[1]{\Y{#1+2}-3*\Y{#1+1}+3*\Y{#1}-\Y{#1-1}}
\newcommand\DeltaFourY[1]{\Y{#1+2}-4*\Y{#1+1}+6*\Y{#1}-4*\Y{#1-1}+\Y{#1-2}}
\newcommand{\FourIntegerDeltas}[1]{%
\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaThreeY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaFourY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\ThreeIntegerDeltas}[1]{%
\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaThreeY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\TwoIntegerDeltas}[1]{%
\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
% optional argument is the nb of digits, default 4 (after decimal mark)
\newcommand{\FourFixedPtDeltas}[2][4]{%
\edef\temp{\xinttheexpr round(\DeltaOneY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaTwoY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaThreeY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaFourY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\ThreeFixedPtDeltas}[2][4]{%
\edef\temp{\xinttheexpr round(\DeltaOneY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaTwoY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaThreeY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\TwoFixedPtDeltas}[2][4]{%
\edef\temp{\xinttheexpr round(\DeltaOneY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaTwoY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\begin{document}\pagestyle{empty}
% \[\begin{array}{c|cH{red}}
% \multicolumn{3}{c}{y=x} \\
% \toprule
% x & y & \multicolumn{1}{c}{\color{red}\Delta y}\\
% \hline
% \xintFor* #1 in {\xintSeq {0}{17}}
% \do { #1 & #1 &\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax}%
% % \xinttheiiexpr as we know result and input are integers
% % \temp is defined to avoid computing it twice
% % but sign check and decision to add a + prefix
% % could be left to \num of sinunitx package for example
% \xintifSgn {\temp}{}{}{+}\temp \\}
% 18 & 18 \\
% \bottomrule
% \end{array}\]
\[\renewcommand\Y[1]{(#1)^5}%
\begin{array}{c|rH{red}L{blue}H{green}L{magenta}}
\multicolumn{6}{c}{y=x^5} \\
\toprule
x & y & \multicolumn{1}{l}{\color{red}\Delta y} &
\multicolumn{1}{l}{\color{blue}\Delta^2 y} &
\multicolumn{1}{l}{\color{green}\Delta^3 y} &
\multicolumn{1}{l}{\color{magenta}\Delta^4 y} \\
\hline
0 & 0 & +1\\
1 & \xinttheiiexpr \Y{1}\relax & \ThreeIntegerDeltas {1}\\
\xintFor* #1 in {\xintSeq {2}{38}}
\do { #1 &\xinttheiiexpr \Y{#1}\relax &\FourIntegerDeltas {#1}\\ }
39 & \xinttheiiexpr \Y{39}\relax & \TwoIntegerDeltas {39}\\
40 & \xinttheiiexpr \Y{40}\relax \\
\bottomrule
\end{array}
\]
\[
\renewcommand\Y[1]{sqrt((#1)/10)}% x=#1/10
\begin{array}{c|rH{red}L{blue}H{magenta}L{green}}
\multicolumn{6}{c}{y=\sqrt{x}} \\
\toprule
x & y & \multicolumn{1}{l}{\color{red}\Delta y} &
\multicolumn{1}{l}{\color{blue}\Delta^2 y} &
\multicolumn{1}{l}{\color{magenta}\Delta^3 y} &
\multicolumn{1}{l}{\color{green}\Delta^4 y} \\
\hline
0 & 0 & +\xinttheexpr round(\Y{1},6)\relax\\
0.1 & \xinttheexpr round(\Y{1},6)\relax & \ThreeFixedPtDeltas[6]{1}\\
\xintFor* #1 in {\xintSeq {2}{40}}\do
{\xintTrunc{1}{#1/10} &\xinttheexpr round(\Y{#1},6)\relax
&\FourFixedPtDeltas [6]{#1}\\ }
4.1 & \xinttheexpr round(\Y{41},6)\relax & \TwoFixedPtDeltas[6]{41}\\
4.2 & \xinttheexpr round(\Y{42},6)\relax \\
\bottomrule
\end{array}
\]
\end{document}
first version:
\documentclass{article}
\usepackage{graphicx}
\usepackage{color}
\usepackage{array}
\usepackage{booktabs}
\usepackage{xinttools}% for \xintFor loop
\usepackage{xintexpr}% for computations, but xintexpr knows only sqrt beyond
% basic operations. On the other hand it computes
% (expandably) with
% exact precision and arbitrarily long numbers.
\newsavebox{\cellbox}
\makeatletter
\newcolumntype{H}[1]{>{\begin{lrbox}{\cellbox}$\color{#1}\mathopen\rangle}l%
<{$\end{lrbox}%
\smash{\raisebox{-.5\ht\@arstrutbox}{\usebox{\cellbox}}}}}
\newcolumntype{L}[1]{>{\begin{lrbox}{\cellbox}$\color{#1}\mathopen\rangle}l%
<{$\end{lrbox}\usebox{\cellbox}}}
\makeatother
\newcommand\Y[1]{(#1)}
% successive difference of a function of an integer variable (step=1)
\newcommand\DeltaOneY[1]{\Y{#1+1}-\Y{#1}}
\newcommand\DeltaTwoY[1]{\Y{#1+1}-2*\Y{#1}+\Y{#1-1}}
\newcommand\DeltaThreeY[1]{\Y{#1+2}-3*\Y{#1+1}+3*\Y{#1}-\Y{#1-1}}
\newcommand\DeltaFourY[1]{\Y{#1+2}-4*\Y{#1+1}+6*\Y{#1}-4*\Y{#1-1}+\Y{#1-2}}
\newcommand{\FourIntegerDeltas}[1]{%
\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaThreeY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaFourY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\ThreeIntegerDeltas}[1]{%
\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaThreeY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\TwoIntegerDeltas}[1]{%
\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheiiexpr \DeltaTwoY{#1}\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
% optional argument is the nb of digits, default 4 (after decimal mark)
\newcommand{\FourFixedPtDeltas}[2][4]{%
\edef\temp{\xinttheexpr round(\DeltaOneY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaTwoY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaThreeY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaFourY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\ThreeFixedPtDeltas}[2][4]{%
\edef\temp{\xinttheexpr round(\DeltaOneY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaTwoY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaThreeY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\newcommand{\TwoFixedPtDeltas}[2][4]{%
\edef\temp{\xinttheexpr round(\DeltaOneY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp
&\edef\temp{\xinttheexpr round(\DeltaTwoY{#2},#1)\relax }%
\xintifSgn {\temp}{}{}{+}\temp }
\begin{document}
% \[\begin{array}{c|cH{red}}
% \multicolumn{3}{c}{y=x} \\
% \toprule
% x & y & \multicolumn{1}{c}{\color{red}\Delta y}\\
% \hline
% \xintFor* #1 in {\xintSeq {0}{17}}
% \do { #1 & #1 &\edef\temp{\xinttheiiexpr \DeltaOneY{#1}\relax}%
% % \xinttheiiexpr as we know result and input are integers
% % \temp is defined to avoid computing it twice
% % but sign check and decision to add a + prefix
% % could be left to \num of sinunitx package for example
% \xintifSgn {\temp}{}{}{+}\temp \\}
% 18 & 18 \\
% \bottomrule
% \end{array}\]
\[\renewcommand\Y[1]{(#1)^5}%
\begin{array}{c|cH{red}L{blue}H{green}L{magenta}}
\multicolumn{6}{c}{y=x^5} \\
\toprule
x & y & \multicolumn{1}{l}{\color{red}\Delta y} &
\multicolumn{1}{l}{\color{blue}\Delta^2 y} &
\multicolumn{1}{l}{\color{green}\Delta^3 y} &
\multicolumn{1}{l}{\color{magenta}\Delta^4 y} \\
\hline
0 & 0 & +1\\
1 & \xinttheiiexpr \Y{1}\relax & \ThreeIntegerDeltas {1}\\
\xintFor* #1 in {\xintSeq {2}{38}}
\do { #1 &\xinttheiiexpr \Y{#1}\relax &\FourIntegerDeltas {#1}\\ }
39 & \xinttheiiexpr \Y{39}\relax & \TwoIntegerDeltas {39}\\
40 & \xinttheiiexpr \Y{40}\relax \\
\bottomrule
\end{array}
\]
\[
\renewcommand\Y[1]{sqrt((#1)/10)}% x=#1/10
\begin{array}{c|cH{red}L{blue}H{magenta}L{green}}
\multicolumn{6}{c}{y=\sqrt{x}} \\
\toprule
x & y & \multicolumn{1}{l}{\color{red}\Delta y} &
\multicolumn{1}{l}{\color{blue}\Delta^2 y} &
\multicolumn{1}{l}{\color{magenta}\Delta^3 y} &
\multicolumn{1}{l}{\color{green}\Delta^4 y} \\
\hline
0 & 0 & +\xinttheexpr round(\Y{1},6)\relax\\
0.1 & \xinttheexpr round(\Y{1},6)\relax & \ThreeFixedPtDeltas[6]{1}\\
\xintFor* #1 in {\xintSeq {2}{40}}\do
{\xintTrunc{1}{#1/10} &\xinttheexpr round(\Y{#1},6)\relax
&\FourFixedPtDeltas [6]{#1}\\ }
4.1 & \xinttheexpr round(\Y{41},6)\relax & \TwoFixedPtDeltas[6]{41}\\
4.2 & \xinttheexpr round(\Y{42},6)\relax \\
\bottomrule
\end{array}
\]
\end{document}
@{\usebox{connectboxred} for example. However it is a bit painful to remove them in places where they should not appear.