# Replace \input{fileX} by the content of fileX automatically

Suppose I have a document with multiple include or input statements

\input{fileA}
\input{fileB}


etc.

Is there an easy way to generate a single .tex file where \input{fileA} is replaced by the actual content of fileA etc. without copying it manually?

You can use the following tools to do this. All of them are on CTAN but not all of them are part of either TeXLive or MikTeX, so you may need to manually install them. They need either Perl or a C compiler installed. Both should not be a problem with Linux but might be one under Windows or Mac. However IIRC TeXLive installs its own Perl interpreter.

latexpand Perl script:

Latexpand is a Perl script that simply replaces \input and \include commands with the content of the file input/included. The script does not deal with \includeonly commands.

### Installation:

Simply download it from http://mirrors.ctan.org/support/latexpand/latexpand and run it. You need Perl installed however.

### Usage:

    perl latexpand mainfile.tex > newfile.tex


flatex

A C program to flatten a LaTeX file into a single file, by explicitly including the files included by \include and \input commands. Also, if BibTeX is being used, then includes the bbl file into the resulting file. The result is therefore a stand-alone LaTeX file that can be emailed to a collaborator.

### Installation:

Get the single C file and compile it, e.g. with cc flatex.c -o flatex.

### Usage:

    flatex mainfile.tex > newfile.tex


flatten

A program to flatten a LaTeX root file by copying \input and \include files into the root file.

### Installation:

Get the ZIP file from CTAN, unpack it and run make followed by make install. You need a C compiler and maybe flex for this. However it seems quite old and you might run in trouble because of it. I failed compiling it!

### Usage:

    flatten mainfile.tex newfile.tex

• I wanted a Python version of this for my own paper building toolchain so I created one: github.com/johnjosephhorton/flatex – John Horton May 12 '12 at 16:18
• @JohnHorton: Good work! You should consider uploading it to CTAN as well. Just get into contact with the author of the original flatten. I don't think he mind having the Python version in the same directory. – Martin Scharrer May 12 '12 at 16:36
• Meanwhile, latexpand seems to be part of TexLive (confirmed with v2012) and also of MikTex – Hotschke Apr 4 '13 at 8:48
• I wonder if any of the scripts take care of the difference between \input and \include? Otherwise the new file might give different results as the original source – cgnieder Jul 30 '14 at 17:08
• They all seem to ignore TEXINPUTS environment variable for me – Mark Sep 14 '14 at 21:41

You need an installed Perl. Save it as buildFile.pl and make it executable or run it with perl buildFile.pl

eval '(exit $?0)' && eval 'exec perl -S$0 ${1+"$@"}' && eval 'exec perl -S $0$argv:q'
if 0;
#use strict;
#
# Usage:
# buildFile.pl < main-file.tex > main-file.tot
#
sub p_inc {
$DateiName = shift; if ( open (my$datei, "$DateiName.tex") ) { print "%%%---------- open: ",$DateiName, "\n";
while (<$datei>) { if (/^\s*\\include{\s+(\S+)/i) { my$include = $1; chomp($include);chop($include); print "%%%%%%%%% Springe nach ",$include, "\n";
p_inc($include); } else { print unless /^\s*(#|$)/; }
}
print "%%%---------- close: ", $DateiName, "\n"; close$datei;
} else { print "%%%<===== Datei existiert nicht\n"; }
}
#
@zeilen = (<>);
for $zeile (@zeilen) { next if$zeile =~ /^\s*(%)/;
if ($zeile =~ /^\s*\\include{\s*(\S+)/i) { my$include = $1; chomp($include);
chop($include); print "%%%%%%%%%%% Springe nach ",$include, "\n";
p_inc($include); } else { print$zeile; }

• Can this work for \import as well ? Thanks. – Anusha Oct 15 '14 at 9:59
• replace include by import and it should work. However, \import is not a TeX command – user2478 Oct 15 '14 at 11:03
• It is from the import package which is useful for including files with relative paths. – Anusha Oct 15 '14 at 11:16

I tried all the options mentioned in this post, but the original flatex works best for me. There appears to be a newer version, but I was unable to compile it as I am not familiar with multi-file C sources. If anyone could try it and let me know about the outcome that would be great.

The original flatex has an issue as it only creates a .flt (the flattened document), even when you specify a different .tex as the output. But that's not really an issue. I have created a batch file that sorts that out and allows integration with Subversion as well (see this post on my website http://www.jwe.cc/2012/02/workflow-with-subversion-and-latex/).

I developed FLaP, a python script which replaces \input, \include and other inclusion directives by the file they refer to while supporting \includeonly. In addition it move graphic files around and adjusts graphic inclusion directive (\includegraphics, includesvg and \overpic) accordingly. It supports the \graphicspath directive and SVG, EPS and PDF images.

• It seems that this tool also tries to do something clever with \def, and this goes easily wrong. – Jukka Suomela Aug 8 '17 at 21:09
• This is correct, the processing of \def is under development, but unfortunately, I have little time to devote to FLaP these days. If you have a specific use case, I invite you to post an issue on the related GitHub page and we will look at it. – Franck Aug 10 '17 at 6:42

I've recently discovered TexSoup, a Python module to parse Latex files inspired by BeatifulSoup. It makes really easy to work with .tex files in a very straightforward way. For instance it allows to target specific Latex commands such as \input{} in just few lines of codes.

Suppose you have a main.tex file in your folder which reads as follows:

\documentclass[12pt]{article}
\begin{document}

% ..other commands here..

\section{First part}
\input{file1}

\section{Second part}
\input{file2}

% ..other commands here..

\end{document}


If the files file1.tex and file2.tex are in the same folder just save the script at the bottom in a file named flatten.py and execute the command:

python flatten.py main.tex expanded.tex


to get the expanded file.

#!/usr/bin/env python3
import sys
from TexSoup import TexSoup

def soupify(file):
"""
"""
soup = TexSoup(content)
return soup

def flatten(soup):
"""
Expand \input{} commands in a tex file.
"""
while soup.input:
soup.input.replace(flatten(soupify(soup.input.args[0]+'.tex')))
return soup

if __name__ == "__main__":
file = sys.argv[1]
expanded_tex = flatten(soupify(file))

if len(sys.argv) > 2:
output_file = sys.argv[2]
else:
output_file = 'output.tex'

with open(output_file, 'w') as output:
output.write(repr(expanded_tex))

pass


Notice: this work for Python 3 only and you have to install TexSoup before (pip install TexSoup). If you have both Python 2 and 3 installed on the same machine you may need to launch the command using python3 instead of python as first word.

The question asks for a single TeX file, but the existing answers appear to address the case of \include and \input statements only. If those statements are generated dynamically by LaTeX commands, then static replacement by a script will miss inclusion of such files.

A solution that captures all files used is:

The resulting archive can then be used with one of the methods described in the other answers (e.g., latexpand, flatex, flatten, or FLaP) in order to generate a single LaTeX file, along the image and other non-LaTeX files included by that file.

I've extended a Python script to handle \include, \input, and \import hierarchically: master2single.py
USAGE: master2single.py masterfile.tex flattenfile.tex [-v] [-c]

There is also texdirflatten which is a perl script.
This worked best for me. YMMV. There is also the consideration that perl is not installed by default on Windows machines.