2

I want to use the longtable package with the apa6 class. The package documentation indicates that longtable should not be called explicitly, but rather listed in the documentclass options. Since I'm also calling man, the document is double-spaced.

\documentclass[man,longtable]{apa6}

This is great, but I want the longtable to be single spaced. I tried following the idea in this SE answer, but it doesn't work because I'm not calling \usepackage{longtable}.

\usepackage{setspace}% http://ctan.org/pkg/setspace
%\AtBeginEnvironment{tabular}{\singlespacing}% works with tabular
\AtBeginEnvironment{longtable}{\singlespacing}% does not work with longtable

Any ideas? Here is a minimal example. It runs, but I need to add man to the options.

\documentclass{apa6} 
\usepackage{longtable} % this runs

\begin{document}
\begin{center}
\begin{longtable}{|c|c|c|c|}
\caption{A simple longtable example}\\
\hline
\textbf{First entry} & \textbf{Second entry} & \textbf{Third entry} & \textbf{Fourth entry} \\
\hline
\endfirsthead
\multicolumn{4}{c}%
{\tablename\ \thetable\ -- \textit{Continued from previous page}} \\
\hline
\textbf{First entry} & \textbf{Second entry} & \textbf{Third entry} & \textbf{Fourth entry} \\
\hline
\endhead
\hline \multicolumn{4}{r}{\textit{Continued on next page}} \\
\endfoot
\hline
\endlastfoot
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
\end{longtable}
\end{center}
\end{document}
  • 1
    Are you sure it doesn't work? You need to add \usepackage{etoolbox} to use \AtBeginEnvironment If I add that to your minimal document (passing the longtable option, and providing the appropriate titling commands for apa6) I get the expected output. – Alan Munn Feb 25 '16 at 4:18
  • brillant, @AlanMunn. i did not understand that i needed \usepackage{etoolbox} – Eric Green Feb 25 '16 at 4:21
2

In order to use \AtBeginEnvironment you need to load the etoolbox package. So the following document works:

\documentclass[man,longtable]{apa6} 
\usepackage{setspace}
\usepackage{etoolbox}
\AtBeginEnvironment{longtable}{\singlespacing}
\title{Foo}
\shorttitle{Foo}
\author{Author}

\begin{document}
\begin{center}
\begin{longtable}{|c|c|c|c|}
\caption{A simple longtable example}\\
\hline
\textbf{First entry} & \textbf{Second entry} & \textbf{Third entry} & \textbf{Fourth entry} \\
\hline
\endfirsthead
\multicolumn{4}{c}%
{\tablename\ \thetable\ -- \textit{Continued from previous page}} \\
\hline
\textbf{First entry} & \textbf{Second entry} & \textbf{Third entry} & \textbf{Fourth entry} \\
\hline
\endhead
\hline \multicolumn{4}{r}{\textit{Continued on next page}} \\
\endfoot
\hline
\endlastfoot
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\ 1 & 2 & 3 & 4 \\
\end{longtable}
\end{center}
\end{document}

output of code

  • The \begin{center} and \end{center} instructions aren't needed, since a longtable is centered by default. – Mico Feb 25 '16 at 6:35

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.