2

I'm currently revising my university's thesis template, and I have almost everything fixed except for particular spacing issues. Our thesis manual states that long section titles must be single spaced, but even after enclosing the entire TOC in a singlespace environment, the long title still appears as double-spaced text. Using abbreviated titles are not allowed; titles must match in the table of contents and the body.

I've tried the fix outlined here but it just double spaced the entire table of contents. I'm currently fiddling with the class file to see if there's anything in there I can do.

MWE is below:

\documentclass[SectionMethod, ListStyleI]{TAMUthesis2}

%\documentclass[ChapterMethod, ListStyleI]{TAMUthesis2}


\usepackage{amsthm}
\usepackage[doublespacing]{setspace}
\usepackage{tocloft}

%\usepackage[labelsep=period]{caption}

\numberwithin{equation}{chapter}

%FIX
\sloppy
\hfuzz=6pt
\vfuzz=6pt
\hbadness=2000
\vbadness=\maxdimen


%FIX
\graphicspath{{graphic/}}

\begin{document}


\include{data/cover}    %only store parameter
\maketitle


\frontmatter
\include{data/Abstract}
\include{data/Dedication}
\include{data/Acknowledgment}
\include{data/Contributors}
\include{data/Nomenclature}


\TAMUTableofContentsFormat  
%The line below add Word `F` on next page Table of Content (TOC). To add the third page word `Page`, Please apply the same command below at appropriate position.
\TAMUTocAddWordPage
\begin{singlespace}
    \tableofcontents
\end{singlespace}

\TAMUListOfFiguresFormat
\begin{singlespace}
    \listoffigures
\end{singlespace}


\TAMUListOfTablesFormat
%Uncomment the line below to add Word `Page' on next page of List of Figure
%\TAMULotAddWordPage    
\begin{singlespace}
    \listoftables
\end{singlespace}


\mainmatter
    \include{data/chapterI}
    \include{data/chapterII}
    \include{data/chapterIII}
    \include{data/chapterIV}
    %\include{data/AnotherChapter}


\TAMUReferenceFormat
    \bibliographystyle{ieeetr}
    \bibliography{myReference}


\appendix
\TAMUAppendixFormat     
%comment the line below if using ChapterMethod or there is no Appendix
\begin{appendices}

%keep this line always if you have appendix
    \include{data/Appendix}

%comment the line below if using ChapterMethod or no appendix
\end{appendices}


\end{document}

Here is the class file TAMUThesis2.cls for which most was generated by the person that had this position last.

\NeedsTeXFormat{LaTeX2e}
\ProvidesClass{TAMUthesis2}[2016/07/15 Texas A&M University Thesis Template Version 2.07.16 based on book.cls]

\newif\if@ChapterMethod\@ChapterMethodtrue
\DeclareOption{ChapterMethod}{\@ChapterMethodtrue}
\DeclareOption{SectionMethod}{\@ChapterMethodfalse}
%\ExecuteOptions{ChapterMethod} %default is ChapterMethod

\newif\if@ListStyle\@ListStyletrue
\DeclareOption{ListStyleI}{\@ListStyletrue}
\DeclareOption{ListStyleII}{\@ListStylefalse}


\DeclareOption*{\PassOptionsToClass{\CurrentOption}{book}}
%\ExecuteOptions{}
\ProcessOptions\relax

\showboxdepth=5
\showboxbreadth=5

\RequirePackage{{lscape}}
\RequirePackage{url}
\RequirePackage{mathtools}
%\RequirePackage{setspace}\onehalfspacing

\RequirePackage{adjustbox}


%\newcommand\blfootnote[1]{%
%  \begingroup
%  \renewcommand\thefootnote{}\footnote{#1}%
%  \addtocounter{footnote}{-1}%
%  \endgroup
%}

%\setlength{\overfullrule}{5pt}

%\hfuzz=50pt

\LoadClass[12pt, letterpaper,oneside]{book}

\RequirePackage{textcomp}

\RequirePackage[T1]{fontenc}
\RequirePackage{arydshln}
\RequirePackage{gensymb}
\RequirePackage{listings}
\lstset{basicstyle=\ttfamily\normalsize}


\RequirePackage{rotating,booktabs} 



\RequirePackage[xetex,bookmarks, hidelinks]{hyperref}  % comment to disable hyper-link in table of contents

\RequirePackage[flushleft]{threeparttable}

\RequirePackage{color, graphicx} % Allows you to import images
\RequirePackage{amsmath}
\RequirePackage{multirow}
\RequirePackage{booktabs}
\RequirePackage[top=1.25in, bottom=1.25in, left=1.4in, right=1.15in]{geometry}
\RequirePackage{caption}
\RequirePackage{truncate}
\DeclareRobustCommand\Caption[2][130pt]{\captionof{figure}{\truncate{#1}{#2}}}
\RequirePackage[T1]{fontenc}
\RequirePackage{mathptmx}
\RequirePackage{pdflscape}

\RequirePackage{subcaption}

\DeclareCaptionFormat{cont}{#1 continued #2#3\par}

\if@ChapterMethod

\else
    \RequirePackage[titletoc,title]{appendix}
\fi

\RequirePackage{setspace}
%\setstretch{1}
%\linespread{1.6}


%font type
\RequirePackage{fontspec}
%\setmainfont{Arial}    %change font style to Arial
\setmainfont{Times New Roman}
\renewcommand*\large{\fontsize{14.05}{14.05}\selectfont}    %fine tunement to adjust \large to be 14pt exactly


%remove vertical space between itemize/enumerate/description
\RequirePackage{enumitem}
%remove vertical space between items in itemize
\setlist[itemize]{noitemsep, nolistsep}
\setlist[enumerate]{noitemsep, nolistsep}
\setlist[description]{noitemsep, nolistsep}

%indent after chapter/sectioin, only affect the first one
\RequirePackage{indentfirst}
\setlength{\parindent}{1cm} %first indent


%Header/Footer Modification
\RequirePackage{fancyhdr}
\lhead{}
\chead{}
\rhead{}
%\lfoot{}
%\rfoot{\thepage}
\cfoot{\thepage}
%\fancyfoot[RO, LE]{\thepage}
\renewcommand{\headrulewidth}{0pt}


\RequirePackage{titlesec}
%modify section title font size
\titleformat*{\section}{\normalfont\bfseries}
\titleformat*{\subsection}{\normalfont\bfseries}
\titleformat*{\subsubsection}{\normalfont\bfseries}
\titleformat*{\paragraph}{\normalfont\bfseries}


\if@ChapterMethod
    %chapter title format
    \titleformat{\chapter}[display]{\large\bfseries\centering}{\chaptertitlename\ \thechapter}{0pt}{\large}
    %modify chapter title name
    \renewcommand{\chaptertitlename}{CHAPTER}
\else
    %chapter title format
    \titleformat{\chapter}{\vspace{1ex}\large\bfseries\centering}{\thechapter}{1em}{\large}
    %modify chapter title name
    %\renewcommand{\chaptertitlename}{CHAPTER}
\fi



\renewcommand{\appendixname}{APPENDIX} % this command is overlapped by something else, I believe comment it won't cause any difference in APPENDIX title
\renewcommand{\bibname}{REFERENCES}


\RequirePackage{tocloft}
%enable that toc has no section number, no subsection number as well
\if@ChapterMethod
\renewcommand{\cftsecpresnum}{\begin{lrbox}{\@tempboxa}}        %for section
\renewcommand{\cftsecaftersnum}{\end{lrbox}}                %for section
\renewcommand{\cftsubsecpresnum}{\begin{lrbox}{\@tempboxa}} %for subsection
\renewcommand{\cftsubsecaftersnum}{\end{lrbox}}             %for subsection
\fi



\addtocontents{toc}{\linespread{1.4}\selectfont}
%\renewcommand\cftbeforechapskip{0pt}
%\renewcommand\cftchapafterpnum{\vskip14pt}

\renewcommand\cftbeforesecskip{-7pt}
%\renewcommand\cftsecafterpnum{\vskip0pt}

\renewcommand\cftbeforesubsecskip{-7pt}
%\renewcommand\cftsubsecafterpnum{\vskip0pt}

%redefine section to have 14pt space in first appearance at toc
\renewcommand\section{\@startsection{section}{2}{\z@}%
  {-3.25ex\@plus -1ex \@minus -0.2ex}%
  {1.5ex \@plus 0.2ex}%
  {\normalfont\bfseries%
  \ifnum\value{section}>1 \else \addtocontents{toc}{\protect\addvspace{14pt}}\fi}}


%add vertical space in lof to have equal space for each figure item
\newcommand*{\noaddvspace}{\renewcommand*{\addvspace}[1]{}}
\addtocontents{lof}{\protect\noaddvspace}
\addtocontents{lot}{\protect\noaddvspace}
\addtocontents{lof}{\linespread{2.1}\selectfont}
%add vertical space in lof to have equal space for each figure item
\addtocontents{lot}{\linespread{2.1}\selectfont}


\RequirePackage{afterpage}          %enable the "PAGE" or other information on the consequencing next page


\if@ListStyle
    %LIST STYLE I
    \addtocontents{toc}{~\hfill {Page} \par}    %add "PAGE" to toc/lof/lot 
    %\addtocontents{toc}{~\hfill \par}      %double space of toc word `'Page' and the chapter title.

    \addtocontents{lof}{{FIGURE}~\hfill {Page} \par}
    %\addtocontents{lof}{~\hfill  \par}
    \addtocontents{lot}{{TABLE}~\hfill {Page} \par}
    %\addtocontents{lot}{~\hfill \par}
\else
    %LIST STYLE II
    \addtocontents{lof}{~\hfill {Page} \par}
    \addtocontents{lot}{~\hfill {Page} \par}
    %%list of figures with "FIGURE"
    \renewcommand{\cftfigfont}{Figure ~}
    \renewcommand{\cfttabfont}{Table ~}
\fi



%modify the vertical space after title but before the content in toc/lof/lot
\setlength{\cftafterloftitleskip}{27pt}
\setlength{\cftafterlottitleskip}{27pt}
\setlength{\cftaftertoctitleskip}{33pt}



%toc title
\renewcommand{\cftchapfont}{\normalfont}
\renewcommand{\cftchappagefont}{\normalfont}

\if@ChapterMethod
    \renewcommand{\cftchappresnum}{CHAPTER }
    \renewcommand{\cftchapnumwidth}{7em}
    %Chapter Roman Numbering
    \renewcommand\thechapter{\Roman{chapter}}
\else
    %Chapter Arabic  Numbering
    \renewcommand\thechapter{\arabic{chapter}}
\fi





%leader dots in TABLE OF CONTENTS
\renewcommand{\cftpartleader}{\cftdotfill{\cftdotsep}} % for parts
\renewcommand{\cftchapleader}{\cftdotfill{\cftdotsep}} % for chapters


\newcommand*\updatechaptername{%
        \addtocontents{toc}{\protect\renewcommand*\protect\cftchappresnum{\@chapapp\ }}
}

%modify toc/lof/lot font size and align horizontal middle
\renewcommand{\cfttoctitlefont}{\large\bfseries}
\renewcommand{\cftloftitlefont}{\large\bfseries}
\renewcommand{\cftlottitlefont}{\large\bfseries}
\renewcommand{\contentsname}{\centerline{TABLE OF CONTENTS}}
\renewcommand{\listfigurename}{\centerline{LIST OF FIGURES}}
\renewcommand{\listtablename}{\centerline{LIST OF TABLES}}


%remove the vertical spacing before toc/lof/lot
\setlength{\cftbeforetoctitleskip}{-6ex}
\setlength{\cftbeforeloftitleskip}{-5.5ex}
\setlength{\cftbeforelottitleskip}{-2.4ex}


%modify the horizontal spacing  in lof/lot
\setlength{\cfttabnumwidth}{4em}
\setlength{\cftfignumwidth}{4em}


%remove the vertical space above CHAPTER title in each chapter, not toc
\titlespacing*{\chapter}{0pt}{-5.5ex}{6ex}
%modify the vertical space above/below section/subsection title in the main content, not toc.
\titlespacing*{\section}{0pt}{1ex}{0.5ex}
\titlespacing*{\subsection}{0pt}{1ex}{0.5ex}
\titlespacing*{\subsubsection}{0pt}{1ex}{0.5ex}
\titlespacing*{\paragraph}{0pt}{1ex}{0.5ex}


%%change equation vertical space
\g@addto@macro\normalsize{%
  \setlength\abovedisplayskip{0ex plus 1ex minus 1ex}
  \setlength\belowdisplayskip{4pt plus 4pt minus 4pt}% plus 1ex minus 1ex}
  \setlength\abovedisplayshortskip{0ex  plus 1ex minus 1ex}
  \setlength\belowdisplayshortskip{4pt plus 4pt minus 4pt}%x plus 1ex minus 1ex}
}


%set figure/table display method to be Arabic.arabic instead of following chapter Roman Number.
\renewcommand{\thefigure}{\arabic{chapter}.\arabic{figure}}
\renewcommand{\thetable}{\arabic{chapter}.\arabic{table}}
\renewcommand{\theequation}{\arabic{chapter}.\arabic{equation}}



%new environment definition
\newenvironment{Contfigure}{%
%\renewcommand{\thefigure}{\Roman{chapter}.\arabic{figure} Continued.}%
\renewcommand{\thefigure}{\arabic{chapter}.\arabic{figure} Continued.}%
\addtocounter{figure}{-1}%
\begin{figure}}{%
%\renewcommand{\thefigure}{\Roman{chapter}.\arabic{figure} }
\renewcommand{\thefigure}{\arabic{chapter}.\arabic{figure} }
\end{figure}}



%new environment definition
\newenvironment{Conttable}{%
%\renewcommand{\thetable}{\Roman{chapter}.\arabic{table} Continued.}%
\renewcommand{\thetable}{\arabic{chapter}.\arabic{table} Continued.}%
\addtocounter{table}{-1}%
\begin{table}}{%
%\renewcommand{\thetable}{\Roman{chapter}.\arabic{table} }
\renewcommand{\thetable}{\arabic{chapter}.\arabic{table}}
\end{table}}
%command must be used when applying Contfigure and Conttable %\captionsetup{list=no} %disable figures/table to appear in lof/lot
%%%%%%%%%%%%%%%%%


%hook definition

\AtBeginDocument{
    \pagestyle{empty} 
    \pagenumbering{roman} 
}
\renewcommand\frontmatter{
    \clearpage
    \setcounter{page}{2} %abstract page number starts from 2.
    \pagestyle{fancy}
    \linespread{2}\selectfont
}


\newcommand{\TAMUTableofContentsFormat}{
    \addtocontents{toc}{\protect\afterpage{~\hfill \par\medskip}} %command to enable second page "PAGE" in toc, together with package{afterpage}
    \phantomsection
    \addcontentsline{toc}{chapter}{TABLE OF CONTENTS}
}


\newcommand{\TAMUTocAddWordPage}{
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
    \addtocontents{toc}{\protect\afterpage{~\hfill{Page}\par\medskip\vspace{1ex}}} %command to enable second page "PAGE" in toc,

    \addtocontents{toc}{\protect\afterpage{~\hfill \par\medskip}} %command to enable second page "PAGE" in toc, together
%this is a manual way to do so, pleaer refer to http://www.latex-community.org/forum/viewtopic.php?f=5&t=252
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
}

\newcommand{\TAMUListOfFiguresFormat}{
    \newpage
    \phantomsection
    \addcontentsline{toc}{chapter}{LIST OF FIGURES}

    \addtocontents{lof}{\protect\afterpage{~\hfill \par\medskip}} %command to enable second page "PAGE" in toc, together with package{afterpage}
}

\newcommand{\TAMULofAddWordPage}{
\if@ListStyle
    \addtocontents{lof}{\protect\afterpage{\noindent{FIGURE}~\hfill{Page}\par\medskip\vspace{-1ex}}} %command to enable second page "PAGE" in toc,
\else
    \addtocontents{lof}{\protect\afterpage{~\hfill{Page}\par\medskip\vspace{-1ex}}} %command to enable second page "PAGE" in toc,
\fi
}

\newcommand{\TAMULotAddWordPage}{
\if@ListStyle
    \addtocontents{lot}{\protect\afterpage{\noindent{TABLE}~\hfill{Page}\par\medskip\vspace{-1ex}}} %command to enable second page "PAGE" in toc,
    %\addtocontents{toc}{\protect\afterpage{~\hfill \par\medskip}} %command to enable second page "PAGE" in toc, together
%this is a manul way to do so, pleaer refer to http://www.latex-community.org/forum/viewtopic.php?f=5&t=252
\else
    \addtocontents{lot}{\protect\afterpage{~\hfill{Page}\par\medskip\vspace{-1ex}}} %command to enable second page "PAGE" in toc,
\fi
}

\newcommand{\TAMUListOfTablesFormat}{
    \linespread{1}\selectfont
    \newpage
    \phantomsection %optional for hyper-ref:
    \addcontentsline{toc}{chapter}{LIST OF TABLES}

     %
%\addtocontents{lot}{\protect\afterpage{{TABLE}~\hfill{Page}\par\medskip}} %command to enable second page "PAGE" in toc, together with package{afterpage}
%\addtocontents{lot}{\protect\afterpage{~\hfill{Page}\par\medskip}} %command to enable second page "PAGE" in toc, together with package{afterpage}
}


\newcommand{\TAMUAbstractFormat}{
    %\cleardoublepage
    \phantomsection %optional for hyperref
    %\addtocontents{toc}{chapter}{\protect\numberline{}Abstract}
    \addcontentsline{toc}{chapter}{ABSTRACT}
%   \begin{spacing}{2}
    \begin{center}
    \MakeUppercase{\textbf{\large Abstract}}
    %       \MakeUppercase
    \end{center}
    \vspace{14pt}
}

\newcommand{\TAMUContributorFormat}{
    %\cleardoublepage
    \phantomsection %optional for hyperref
    %\addtocontents{toc}{chapter}{\protect\numberline{}Contributors and Funding Sources}
    \addcontentsline{toc}{chapter}{CONTRIBUTORS AND FUNDING SOURCES}
%   \begin{spacing}{2}
    \begin{center}
    \MakeUppercase{\textbf{\large Contributors and Funding Sources}}
    %       \MakeUppercase
    \end{center}
    \vspace{14pt}
}

\newcommand{\TAMUNomenclatureFormat}{
    %\cleardoublepage
    %\addtocontents{toc}{chapter}{\protect\numberline{}Abstract
    \phantomsection %optional for hyperref
    \addcontentsline{toc}{chapter}{NOMENCLATURE}

    \begin{center}
    \MakeUppercase{\textbf{\large Nomenclature}}
    \end{center}
    \vspace{14pt}
}

\newcommand{\TAMUDedicationFormat}{
%\cleardoublepage
\phantomsection
%\addtocontents{toc}{chapter}{\protect\numberline{}Abstract
\addcontentsline{toc}{chapter}{DEDICATION}

}

\newcommand{\TAMUAcknowledgmentFormat}{
    \phantomsection %optional for hyperref
\addcontentsline{toc}{chapter}{ACKNOWLEDGMENTS}
\begin{center}
\MakeUppercase{\textbf{\large Acknowledgments}}
\end{center}
\vspace{14pt} 
}

\newcommand{\TAMUReferenceFormat}{
    \newpage
    \phantomsection
        \addcontentsline{toc}{chapter}{REFERENCES}
}

\newcommand{\TAMUAppendixFormat}{
    \captionsetup{list=no} %disable figures/table to appear in lof/lot
    \renewcommand{\thefigure}{\Alph{chapter}.\arabic{figure}}   %fixed the bug caused by Figure/Table Continued, all appendix figure/table in appendix will be labeled as A.1, A.2, A.3...
    \renewcommand{\thetable}{\Alph{chapter}.\arabic{table}} %fixed the bug caused by Figure/Table Continued, all appendix figure/table in appendix labeled as A.1, A.2
\if@ChapterMethod
    \renewcommand{\chaptertitlename}{APPENDIX}  % some unknown bugs, comment this line will cause the Appendix title in main content becomes CHAPTER A instead of APPENDIX A
    \updatechaptername  %this cmd is needed for chatper method to update toc title for appendix
\fi
}


\renewcommand\mainmatter{
    \clearpage
    \pagenumbering{arabic}
    \linespread{2}\selectfont
}

%end of hook definition

\let\@documentname\@empty
\let\@degreename\@empty
\let\@majorname\@empty

\let\@ChairOfCommittee\@empty
\let\@CoChairOfCommittee\@empty
\let\@CommitteeMemberOne\@empty
\let\@CommitteeMemberTwo\@empty
\let\@CommitteeMemberThree\@empty
\let\@CommitteeMemberFour\@empty
\let\@HeadOfDepartment\@empty

\let\@GraduateMonth\@empty
\let\@GraduateYear\@empty

\let\@GradMajor\@empty


\newcommand{\TAMUdocument}[1]{\def\@documentname{#1}}\TAMUdocument{Thesis/Dissertation/Record of Study}
\def\@TAMUdocument{\@documentname}
\newcommand{\TAMUdegree}[1]{\def\@degreename{#1}}\TAMUdegree{Master of Science}
\def\@TAMUdegree{\@degreename}


\newcommand{\ChairOfCommitteeName}[1]{\def\@ChairOfCommittee{#1}}\ChairOfCommitteeName{Chair's Name}
\def\@ChairOfCommitteeName{\@ChairOfCommittee}
\newcommand{\CommitteeMemberOneName}[1]{\def\@CommitteeMemberOne{#1}}\CommitteeMemberOneName{Committee Member One's Name}
\def\@CommitteeMemberOneName{\@CommitteeMemberOne}
\newcommand{\CommitteeMemberTwoName}[1]{\def\@CommitteeMemberTwo{#1}}\CommitteeMemberTwoName{Committee Member Two's Name}
\def\@CommitteeMemberTwoName{\@CommitteeMemberTwo}

\newcommand{\HeadOfDepartmentName}[1]{\def\@HeadOfDepartment{#1}}\HeadOfDepartmentName{Head Of Department's Name}
\def\@HeadOfDepartmentName{\@HeadOfDepartment}

\newcommand{\CoChairOfCommitteeName}[1]{\def\@CoChairOfCommittee{#1}}
\newcommand{\CommitteeMemberThreeName}[1]{\def\@CommitteeMemberThree{#1}}
\newcommand{\CommitteeMemberFourName}[1]{\def\@CommitteeMemberFour{#1}}

\newcommand{\TAMUgradMonth}[1]{\def\@GraduateMonth{#1}}\TAMUgradMonth{May/August/December}
\def\@TAMUgradMonth{\@GraduateMonth}
\newcommand{\TAMUgradYear}[1]{\def\@GraduateYear{#1}}\TAMUgradYear{20XX}
\def\@TAMUgradYear{\@GraduateYear}

\newcommand{\TAMUmajor}[1]{\def\@GradMajor{#1}}\TAMUmajor{Your Major}
\def\@TAMUmajor{\@GradMajor}


\renewcommand\maketitle{
    \begin{center}
    \begin{spacing}{2.1}
        {\large\bfseries\@title\par}
        \vspace{17mm} \par
        A \@documentname \par
        by \par
        \MakeUppercase{\@author} \\     
    \end{spacing}
    \vspace{8mm}\par
    {Submitted to the Office of Graduate and Professional Studies of  \par
        Texas A\&M University \par
    in partial fulfillment of the requirement for the degree of \par
%           \vspace{9mm}    
            \vspace{14pt}   
        \MakeUppercase{\@degreename}
    }
    \end{center}
%   \vspace{6mm}
    \vspace{24pt}
\begin{flushleft}
    \begin{tabular}{l l}
        Chair of Committee,     &   \@ChairOfCommittee  \\ 
        %
        \ifx\@CoChairOfCommittee\@empty %
            \expandafter\@firstoftwo
        \else %
            \expandafter\@secondoftwo
        \fi %
        {}          %
        {Co-Chair of Committee,& \@CoChairOfCommittee  \\ }%

        Committee Members,  &   \@CommitteeMemberOne        \\
                        &    \@CommitteeMemberTwo       \\  %
        \ifx\@CommitteeMemberThree\@empty %
            \expandafter\@firstoftwo
        \else %
            \expandafter\@secondoftwo %
        \fi     %
        {}  %
        { & \@CommitteeMemberThree  \\} %
        \ifx\@CommitteeMemberFour\@empty %
            \expandafter\@firstoftwo
        \else %
            \expandafter\@secondoftwo %
        \fi %
        {}%
        { & \@CommitteeMemberFour   \\} %
        %https://tex.stackexchange.com/questions/4072/how-to-display-some-text-based-on-a-condition-inside-a-tabular-environment
        Head of Department,     &   \@HeadOfDepartment  \\  
    \end{tabular}
\end{flushleft}
    \begin{center}
        \vspace{31pt} \par
        \@GraduateMonth         %August%December %
        ~   %
        \@GraduateYear              % 20XX
        %university requires that graduating data must be
        \par
        \vspace{40pt}
        Major Subject:  \@GradMajor
        \par
        \vspace{42pt}
        Copyright  \@GraduateYear %
        ~\@author
    \end{center}
}

\endinput

Partial Output showing long title

I apologize for the length of code.

  • 1
    Welcome to TeX.SX! Where can TAMUthesis2.cls be found? – user31729 Jul 26 '16 at 19:02
  • This page, howdy.me/template-download, V1.7, makes particular reference to fixing TOC spacing in the TAMU thesis template (though I cannot find reference to TAMUthesis2.cls, only TAMUthesis.cls at ogaps.tamu.edu/New-Current-Students/…) – Steven B. Segletes Jul 26 '16 at 19:29
  • That was for an older template version; I also apologize for the lack of TAMUthesis2.cls. I will include it as soon as I can. – TheIncredibleZ1 Jul 26 '16 at 20:43

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.