Rotated column titles in tabular

Question

I'd like to create a chart where the column titles are rotated, as per this toy example:

I used the rotating package to generate the above. It has certain shortcomings: the rotate command doesn't leave space for the titles, so I have to manually space things to prevent overlaps. The turn command, by contrast, creates too much space, where each column is the width of the entire rotated column title.

There is also no easy way to have long titles be split into multiple lines.

Is there a package for creating tables of this sort, or at least one that would relieve some of the manual placing and spacing that goes into creating such a table?

---

This question is more to make sure I don't miss any easy way of doing what I want than seeking help on manually doing it, but the code for above is included anyways:

\begin{tabular}{r|ccc}
&
\begin{rotate}{60} Property 1 \end{rotate} &
\begin{rotate}{60} Property 2 \end{rotate} &
\begin{rotate}{60} Property 3 \end{rotate} \\ \hline
System 1        &       &       &  X    \\ 
System 2        & X     & X     &  X    \\
System 3        & X &   &  X    \\ \hline
\end{tabular}

Answer 1

You can use the adjustbox package to rotate the content and limit it official width. I would also recommend to use a separate \newcolumntype for it as well as a \rot macro which inserts the required \multicolumn command. You won't avoid that one. However, such a macro must be fully expandable and start directly with \multicolumn. If you want multi line headings add the minipage=<width> option to \adjustbox.

\documentclass{article}

\usepackage{adjustbox}
\usepackage{array}

\newcolumntype{R}[2]{%
    >{\adjustbox{angle=#1,lap=\width-(#2)}\bgroup}%
    l%
    <{\egroup}%
}
\newcommand*\rot{\multicolumn{1}{R{45}{1em}}}% no optional argument here, please!

\begin{document}

\begin{tabular}{r|ccc}
&
\rot{Property 1} &
\rot{Property 2} &
\rot{Property 3}
    \\ \hline
System 1        &       &       &  X    \\ 
System 2        & X     & X     &  X    \\
System 3        & X &   &  X    \\ \hline
\end{tabular}


\renewcommand*\rot{\multicolumn{1}{R{60}{1em}}}% no optional argument here, please!

\begin{tabular}{r|ccc}
&
\rot{Property 1} &
\rot{Property 2} &
\rot{Property 3}
    \\ \hline
System 1        &       &       &  X    \\ 
System 2        & X     & X     &  X    \\
System 3        & X &   &  X    \\ \hline
\end{tabular}


\renewcommand*\rot[2]{\multicolumn{1}{R{#1}{#2}}}% no optional argument here, please!

\begin{tabular}{r|ccc}
&
\rot{90}{1em}{Property 1} &
\rot{60}{1em}{Property 2} &
\rot{45}{2em}{Property 3}
    \\ \hline
System 1        &       &       &  X    \\ 
System 2        & X     & X     &  X    \\
System 3        & X &   &  X    \\ \hline
\end{tabular}

\end{document}

Answer 2

Wrapping the rotated contents in a box of fixed width you can easily manipulate the intended width of each column header. All of this, including the rotation, can be wrapped in a macro so that your code reads a little better. Moreover, some of the rotation and width specifications can be given default values so you only have to worry about them in special instances.

In the minimal example below, the command \rot[<angle>][<width>]{<stuff>} rotates <stuff> at angle <angle> (defaults to 45 degrees) and fixes it to have a width of <width> (default is 1em). The first two arguments are optional, while the last is mandatory.

\documentclass{article}
\usepackage{graphicx} % http://ctan.org/pkg/graphicx
\usepackage{booktabs} % http://ctan.org/pkg/booktabs
\usepackage{xparse}   % http://ctan.org/pkg/xparse
% Rotation: \rot[<angle>][<width>]{<stuff>}
\NewDocumentCommand{\rot}{O{45} O{1em} m}{\makebox[#2][l]{\rotatebox{#1}{#3}}}%
\begin{document}

% ===== DEFAULT ROTATION PARAMETERS
\begin{tabular}{lccc}
    & \rot{Property 1}
    & \rot{Property 2}
    & \rot{Property 3} \\
    \midrule
    System 1 &   &   & X \\
    System 2 & X & X & X \\
    System 3 & X &   & X \\
    \bottomrule
\end{tabular}

\bigskip

% ===== MODIFIED ANGLE ROTATION
\begin{tabular}{lccc}
    & \rot[60]{Property 1}
    & \rot[60]{Property 2}
    & \rot[60]{Property 3} \\
    \midrule
    System 1 &   &   & X \\
    System 2 & X & X & X \\
    System 3 & X &   & X \\
    \bottomrule
\end{tabular}

\bigskip

% ===== MODIFIED ANGLE & WIDTH ROTATION
\begin{tabular}{lccc}
    & \rot[25][3em]{Property 1}
    & \rot[25][3em]{Property 2}
    & \rot[25][3em]{Property 3} \\
    \midrule
    System 1 &   &   & X \\
    System 2 & X & X & X \\
    System 3 & X &   & X \\
    \bottomrule
\end{tabular}

\end{document}

To me, this allows for less manual interaction, since some of the parameters are set by default.

Answer 3

The simplest way to do it (at least for me):

Add in the preamble of the document (wherever you feel like):

\def\rot{\rotatebox}

then, inside the table, if you want to rotate some cell, just wrap its content:

\rot{angle}{content}

where angle goes in degrees.

That's it!

Answer 4

I would define a new column type using a rotated minipage; in the following example, the first mandatory argument of this new column type controls the angle of rotation, and the second argument specifies the minipage's width:

\documentclass{article}
\usepackage{array}
\usepackage{booktabs}
\usepackage{rotating}

\newcolumntype{P}[2]{%
  >{\begin{turn}{#1}\begin{minipage}{#2}\small\raggedright\hspace{0pt}}l%
  <{\end{minipage}\end{turn}}%
}

\begin{document}

\begin{table}
  \centering
  \caption{Some properties}
  \label{tab:test1}
  \begin{tabular}{@{}rccc@{}}
  \toprule
  & \multicolumn{1}{P{90}{1.6cm}}{Property 1} &
    \multicolumn{1}{P{90}{1.6cm}}{Property 2} &
    \multicolumn{1}{P{90}{1.6cm}@{}}{Property 3 more text} \\
      \midrule
  System 1 &     &     & X \\
  System 2 & X & X & X \\
  System 3 & X &    & X \\
  \bottomrule
  \end{tabular}
\end{table}

\begin{table}
  \centering
  \caption{Some properties}
  \label{tab:test2}
  \begin{tabular}{@{}rccc@{}}
  \toprule
  & \multicolumn{1}{P{60}{1.6cm}}{Property 1} &
    \multicolumn{1}{P{60}{1.6cm}}{Property 2} &
    \multicolumn{1}{P{60}{1.6cm}@{}}{Property 3 more text} \\
  \midrule
  System 1 &     &     & X \\
  System 2 & X & X & X \\
  System 3 & X &    & X \\
  \bottomrule
  \end{tabular}
\end{table}

\end{document}​

Answer 5

One more possible solution: use of \makecell and rotating packages:

\documentclass{article}
\usepackage[english]{babel}
\usepackage{makecell,rotating}
    \setcellgapes{5pt}

\begin{document}
\begin{center}
\makegapedcells
    \settowidth\rotheadsize{\theadfont Property 1}
    \renewcommand\cellrotangle{45}
    \begin{tabular}{r|ccc}
                &   \rothead{Property 1} &
                    \rothead{Property 2} &
                    \rothead{Property 3}    \\  \hline
System 1        &       &       &  X        \\
System 2        & X     & X     &  X        \\    
System 3        & X     &       &  X        \\  \hline
    \end{tabular}
\end{center}
\end{document}

Answer 6

This also provides an option I've used. https://www.overleaf.com/latex/examples/example-of-rotated-text-in-latex/fkmpsbztrxmv

\usepackage{rotating}
in the preamble, and

\begin{turn}{45} 
...
\end{turn}

Answer 7

I always use \usepackage{rotating} for this kind of stuff:

\begin{turn}{60}
Text rotated by 60 degrees
\end{turn}