0

I wants to make the 2nd \title in the same document but with some additional text on it. I have tried but couldn't fix it. I failed to identify the used package as well. I am not sure which package I should alter.

I used the following code, but it generates 3 output pages: 2 title pages and one additional page with tabular information. The font style of third page with tabular is also different. I want the font like shown in the attached figure. Any suggestion please? Title Font Style

I have already tried these:

Two 'maketitle's in article

To have two titles in the document at different pages with the same style

MWE:

\documentclass[
fontsize=11pt,   % Schriftgröße
DIV=12,          % Seitenaufteilung
BCOR=5mm,        % Bindekorrektur
ngerman,         % für Umlaute, Silbentrennung etc.
paper=a4,        % Papierformat
oneside,         % einseitig
titlepage,       % es wird eine Titelseite verwendet
parskip=half,    % Abstand zwischen Absätzen (halbe Zeile)
toc=bibliography,% Fügt das Literaturverzeichnis ins Inhaltsverzeichnis ein
toc=listof,          % Fügt das Abbildungs- und Tabellenverzeichis ins Inhaltsverzeichnis ein
draft=false,           % Status des Dokuments (final/draft)
%    captions=nooneline     % Beschriftungen nicht zentrieren
 ]{scrbook}

\begin{document}

\thispagestyle{empty}

\begin{titlepage}

  \subject{\textsf{Assignment}}

  \title{Thermal Power Plants\\[6cm]}


  \author{XXX}
  \date{October 28, 2016\\[1cm]}


  \maketitle
\end{titlepage}

\begin{titlepage}

  \subject{\textsf{Assignment}}

  \title{Thermal Power Plants\\[6cm]}

  \begin{center}

  \vspace{20mm}

  \begin{tabular}{ll}
    \Large\textbf {Prüfer:}     & \Large\textbf {XXX} \\
    \Large\textbf{Betreuer:}    & \Large\textbf {XXX}   \\      
    \Large\textbf{Verfasser: }    & \Large\textbf{XXX} 
  \end{tabular}

  \end{center}
  \maketitle
  \end{titlepage}

\end{document}
5
  • 1
    your question is not very clear, and your example can not be run so isn't really much help but your image shows a sans serif title so perhaps you want to remove all the \Large\textbf from the tabular and put \Large\sffamily\bfseries just before \begin{tabular} Commented Oct 14, 2016 at 21:38
  • Normally, you don't use \maketitle in titlepage, but maybe KOMA is different.
    – cfr
    Commented Oct 14, 2016 at 21:56
  • Yes, you are right. @David Carlisle Actually I haven't included the packages here because they were so many and I'm not sure which one should I include in MWE. But I run this with my packages, it works. I want to get 2 title pages of the same title font but the 2nd title page should also include the tabular information, in addition to the title.
    – Yousaf
    Commented Oct 14, 2016 at 23:18
  • @ArslanYousaf the point of the example is that people can run it to see the problem and test answers so for a start it should not have \input{deckblatt} just make a small single file document that has the issue. Commented Oct 15, 2016 at 7:12
  • I've updated the code. Please see it. @DavidCarlisle But as I mentioned earlier, I have no clue which package should I include here, from my Packages.tex so that this file can be run easily.
    – Yousaf
    Commented Oct 15, 2016 at 11:41

1 Answer 1

1

You can insert the tabular for the second title within the \title command, and you can't combine the environment titlepage with maketitle.

\documentclass[
fontsize=11pt,   % Schriftgröße
DIV=12,          % Seitenaufteilung
BCOR=5mm,        % Bindekorrektur
ngerman,         % für Umlaute, Silbentrennung etc.
paper=a4,        % Papierformat
oneside,         % einseitig
titlepage,       % es wird eine Titelseite verwendet
parskip=half,    % Abstand zwischen Absätzen (halbe Zeile)
toc=bibliography,% Fügt das Literaturverzeichnis ins Inhaltsverzeichnis ein
toc=listof,          % Fügt das Abbildungs- und Tabellenverzeichis ins Inhaltsverzeichnis ein
draft=false,           % Status des Dokuments (final/draft)
%    captions=nooneline     % Beschriftungen nicht zentrieren
 ]{scrbook}
 \usepackage{graphicx}

\begin{document}

\thispagestyle{empty}

  \titlehead{\includegraphics[width=\textwidth,height=2cm]{example-image}}
  \subject{\textsf{Assignment}}
  \title{Thermal Power Plants\\[6cm]}
  \author{XXX}
  \date{October 28, 2016}

\maketitle

  \titlehead{}
  \title{Thermal Power Plants\\[6cm]
  \vspace{20mm}
  {\Large
  \begin{tabular}{ll}
   Prüfer:        & XXX \\
   Betreuer:      & XXX   \\      
   Verfasser:     & XXX
  \end{tabular}
  }
  }
  \author{}
  \date{}

\maketitle

\end{document}
4
  • It works but it shows the Author Name and Date on both title pages. I just want Author Name and Date on title page one, not on the second title.
    – Yousaf
    Commented Oct 16, 2016 at 2:30
  • And if I want to include \titlehead like \titlehead{\includegraphics[width=\textwidth]{header}} , where should I include? For both title pages or do I need to include it just once. I have tried but it shows the first title page along with titlehead, second page with just a titlehead and third page contains title, tabular and author.
    – Yousaf
    Commented Oct 16, 2016 at 2:43
  • 1
    Answer updated, to remove author, date, titlehead from the second page just add command \author, \date, \titlehead without parameter
    – Salim Bou
    Commented Oct 16, 2016 at 7:35
  • It has worked. Thanks @Salim Bou But in my case, even-though there is a place on second title I see a third page with just a toprule. I tried with reducing the given vspace but still it's there.
    – Yousaf
    Commented Oct 16, 2016 at 14:19

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .