1

Can you please help me modify the listing names as shown in the image attached. I currently have 4 different \lstdefinestyle and would like to then have 4 different listing names. I was trying to follow the solution given here to modify the listings names but I could not get the code to work properly.

Any help to get the listing names changed as shown in the image, is sincerely appreciated!

enter image description here

Here is my code:

\documentclass[a4paper, 10pt]{report}

\newcommand{\codeimg}{\includegraphics[scale=0.1]{example-image-a}}

\usepackage{calc}
\usepackage[usenames,dvipsnames,svgnames,table]{xcolor}
\usepackage{pdfpages,graphicx}
\usepackage{mdframed}
\usepackage{listings}
\usepackage{filecontents}
\usepackage[numbered,framed]{matlab-prettifier}

\definecolor{light-gray}{gray}{0.92}
\definecolor{myblueiii}{RGB}{199,234,253}
\definecolor{mainColor}{RGB}{211, 47, 47} % some dark red
\definecolor{codegreen}{rgb}{0,0.6,0}
\definecolor{codegray}{rgb}{0.5,0.5,0.5}
\definecolor{codepurple}{rgb}{0.58,0,0.82}
\definecolor{backcolour}{rgb}{0.95,0.95,0.92}
\definecolor{mybluei}{RGB}{0,173,239}
\definecolor{myblueiii}{RGB}{199,234,253}

%\renewcommand\lstlistingname{Code}
\lstset{
    language=Python,
    numbers=left,
    numbersep= 7mm,
    numberstyle=\color{Black},
    stepnumber=1,
    tabsize=3,
    breakatwhitespace=false,
    breaklines=true,
    captionpos=b,
    basicstyle=\color{Black}\ttfamily,
    commentstyle=\color{LimeGreen},
    keywordstyle=\color{BurntOrange}\bfseries,
    stringstyle=\color{WildStrawberry},
    keywords={var, func, extends},
    frame=leftline,
    framesep=0mm,
    xleftmargin=3mm,
    framesep=2mm,
    framerule=0mm,
    abovecaptionskip=5mm,
    aboveskip=\baselineskip,
    belowskip=\baselineskip
}

\usepackage{tcolorbox}
\tcbuselibrary{skins,breakable,listings}
\newtcblisting[use counter=lstlisting]{codeblock}[2][]{%
        enhanced,noparskip,breakable,colback=light-gray,colframe=DarkSlateGray,opacitybacktitle=.8,%
        fonttitle=\bfseries,before upper={\hspace*{-1em}\includegraphics[height=\baselineskip]{example-image-a}~#2},%
        title after break={\centering\footnotesize\itshape\strut\lstlistingname~\thelstlisting~--~continued},%
        listing only,listing options={xleftmargin=-1mm},after upper={\centering\strut\lstlistingname~\thelstlisting:~#2},
        frame hidden,arc=0pt,outer arc=0pt,boxrule=0pt,frame code={\draw[gray,line width=2mm] ([xshift=-0.5pt]frame.north west) -- ([xshift=-0.5pt]frame.south west);},#1}

\lstdefinestyle{mystyleresults}{
    backgroundcolor=\color{backcolour},
    commentstyle=\color{codegreen},
    keywordstyle=\color{black},
    numberstyle=\tiny\color{codegray},
    stringstyle=\color{black},
    basicstyle=\ttfamily\footnotesize,
    breakatwhitespace=false,
    breaklines=true,
    captionpos=b,
    keepspaces=true,
    numbers=none,
    numbersep=5pt,
    showspaces=false,
    showstringspaces=false,
    showtabs=false,
    backgroundcolor=\color{myblueiii},
    tabsize=6
}

\lstdefinestyle{mystylecode}{
    language=C,
    numbers=none,
    commentstyle=\color{LimeGreen},
    keywordstyle=\color{BurntOrange}\bfseries,
    keywords={real},
    backgroundcolor=\color{codegray!10}
}

\begin{filecontents}{result_1.txt}
=== Run information ===

Correlation coefficient                  0.5941
Mean absolute error                      2.2173
Root mean squared error                  3.7905
Relative absolute error                 76.7091 %
Root relative squared error             81.3406 %
Total Number of Instances              188

\end{filecontents}

\begin{filecontents}{result_2.txt}
% 9 attributes
% 188 instances

@relation FIT

@attribute NUMUORS real   % Number of unique operators
@attribute NUMUANDS real  % Number of unique operands
@attribute TOTOTORS real  % Total number of operators

\end{filecontents}

\begin{filecontents*}{sample.m}
% create a file for output
!touch testFile.txt
fid = fopen('testFile.text', 'w')
for i=1:10
  fprintf(fid,'%6.2f \n', i);
end
\end{filecontents*}


\begin{document}

\lstinputlisting[
style=mystylecode,
caption={Code Snippet.},
label = R1]{result_2.txt}

\lstinputlisting[
style=mystyleresults,
caption={Results from run 1.},
label = bilateral1GPA]{result_1.txt}

\begin{codeblock}{Les bases de GDScript}
var nombreDeGardes = 4 #déclaration d'une variable
nombreDeGardes = plusDeux(nombreDeGardes) #appel d'une fonction avec la variable nombreDeGardes passée en paramètre
\end{codeblock}

\lstinputlisting[style=Matlab-editor,caption=Sample code from Matlab]{sample.m}

\end{document}
Improve this question
9
  • 2
    You have multiple listings environments, but they all use the same counter lstlisting, so what do you expect?
    – user31729
    Feb 11, 2017 at 23:34
  • @ChristianHupfer, how do you go about changing the counter then? Thanks.
    – Joe
    Feb 11, 2017 at 23:35
  • No easy solution for this, in my point of view
    – user31729
    Feb 11, 2017 at 23:42
  • The easiest way is to use \newtcbinputlistings instead of the \lstinputlistings and use tcolorbox features
    – user31729
    Feb 11, 2017 at 23:49
  • But that can change the caption labels?
    – Joe
    Feb 12, 2017 at 0:00

1 Answer 1

Reset to default
2

I've just introduced some new commands for inputting your data according to type. They switch between the styles and of course are fully based on tcolorbox. Hence you have to style them according to your needs, but the manual here is very good.

listings

\documentclass[a4paper, 10pt]{report}

\newcommand{\codeimg}{\includegraphics[scale=0.1]{example-image-a}}

\usepackage{calc}
\usepackage[usenames,dvipsnames,svgnames,table]{xcolor}
\usepackage{pdfpages,graphicx}
\usepackage{listings}
\usepackage{filecontents}
\usepackage[numbered,framed]{matlab-prettifier}

\definecolor{light-gray}{gray}{0.92}
\definecolor{myblueiii}{RGB}{199,234,253}
\definecolor{mainColor}{RGB}{211, 47, 47} % some dark red
\definecolor{codegreen}{rgb}{0,0.6,0}
\definecolor{codegray}{rgb}{0.5,0.5,0.5}
\definecolor{codepurple}{rgb}{0.58,0,0.82}
\definecolor{backcolour}{rgb}{0.95,0.95,0.92}
\definecolor{mybluei}{RGB}{0,173,239}
\definecolor{myblueiii}{RGB}{199,234,253}

%\renewcommand\lstlistingname{Code}
\lstset{
    language=Python,
    numbers=left,
    numbersep= 7mm,
    numberstyle=\color{Black},
    stepnumber=1,
    tabsize=3,
    breakatwhitespace=false,
    breaklines=true,
    captionpos=b,
    basicstyle=\color{Black}\ttfamily,
    commentstyle=\color{LimeGreen},
    keywordstyle=\color{BurntOrange}\bfseries,
    stringstyle=\color{WildStrawberry},
    keywords={var, func, extends},
    frame=leftline,
    framesep=0mm,
    xleftmargin=3mm,
    framesep=2mm,
    framerule=0mm,
    abovecaptionskip=5mm,
    aboveskip=\baselineskip,
    belowskip=\baselineskip
}

\usepackage{tcolorbox}
\newcounter{data}
\newcounter{result}
\newcounter{pythoncode}
\newcounter{matlab}
\tcbuselibrary{skins,breakable,listings}
\newtcblisting[use counter=pythoncode]{codeblock}[2][]{%
        enhanced,noparskip,breakable,colback=light-gray,colframe=DarkSlateGray,opacitybacktitle=.8,%
        fonttitle=\bfseries,before upper={\hspace*{-1em}\includegraphics[height=\baselineskip]{example-image-a}~#2},%
        title after break={\centering\footnotesize\itshape\strut Python Code~\thepythoncode~--~continued},%
        listing only,listing options={xleftmargin=-1mm,#1},after upper={\centering\strut Python Code~\thepythoncode:~#2},
        frame hidden,arc=0pt,outer arc=0pt,boxrule=0pt,frame code={\draw[gray,line width=2mm] ([xshift=-0.5pt]frame.north west) -- ([xshift=-0.5pt]frame.south west);},#1}
\newtcbinputlisting[use counter=data]{\inputdata}[3][]{listing options={style=mystylecode},%
    title after break={\centering\footnotesize\itshape\strut Data~\thedata~--~continued},%
     listing only,listing options={xleftmargin=-1mm,#1},after upper={\centering\strut Data~\thedata:~#2},%
     listing file={#3}}
\newtcbinputlisting[use counter=result]{\inputresult}[3][]{listing options={style=mystyleresults},%
    title after break={\centering\footnotesize\itshape\strut Result~\theresult~--~continued},%
     listing only,listing options={xleftmargin=-1mm,#1},after upper={\centering\strut Result~\theresult:~#2},%
     listing file={#3}}
\newtcbinputlisting[use counter=matlab]{\inputmatlab}[3][]{listing options={style=Matlab-editor},%
    title after break={\centering\footnotesize\itshape\strut Matlab Code~\thematlab~--~continued},%
     listing only,listing options={xleftmargin=-1mm,#1},after upper={\centering\strut Matlab Code~\thematlab:~#2},%
     listing file={#3}}

\lstdefinestyle{mystyleresults}{
    backgroundcolor=\color{backcolour},
    commentstyle=\color{codegreen},
    keywordstyle=\color{black},
    numberstyle=\tiny\color{codegray},
    stringstyle=\color{black},
    basicstyle=\ttfamily\footnotesize,
    breakatwhitespace=false,
    breaklines=true,
    captionpos=b,
    keepspaces=true,
    numbers=none,
    numbersep=5pt,
    showspaces=false,
    showstringspaces=false,
    showtabs=false,
    backgroundcolor=\color{myblueiii},
    tabsize=6
}

\lstdefinestyle{mystylecode}{
    language=C,
    numbers=none,
    commentstyle=\color{LimeGreen},
    keywordstyle=\color{BurntOrange}\bfseries,
    keywords={real},
    backgroundcolor=\color{codegray!10}
}

\begin{filecontents}{result1.txt}
=== Run information ===

Correlation coefficient                  0.5941
Mean absolute error                      2.2173
Root mean squared error                  3.7905
Relative absolute error                 76.7091 %
Root relative squared error             81.3406 %
Total Number of Instances              188

\end{filecontents}

\begin{filecontents}{result2.txt}
% 9 attributes
% 188 instances

@relation FIT

@attribute NUMUORS real   % Number of unique operators
@attribute NUMUANDS real  % Number of unique operands
@attribute TOTOTORS real  % Total number of operators

\end{filecontents}

\begin{filecontents*}{sample.m}
% create a file for output
!touch testFile.txt
fid = fopen('testFile.text', 'w')
for i=1:10
  fprintf(fid,'%6.2f \n', i);
end
\end{filecontents*}


\begin{document}

\inputdata{Code Snippet}{result2.txt}
\inputresult{Result from run 1}{result1.txt}

\begin{codeblock}{Les bases de GDScript}
var nombreDeGardes = 4 #déclaration d'une variable
nombreDeGardes = plusDeux(nombreDeGardes) #appel d'une fonction avec la variable nombreDeGardes passée en paramètre
\end{codeblock}

\inputmatlab{Sample matlab code}{sample.m}

\end{document}
Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.