0

I am trying to make this table organized. I want everything in the left corner of the table and the sequence as it is represented now (I want the lines in the same sequence but since I didn't know how to add a new line in each cell I had to add the text to each row and leave the left cell of the row empty). Can anyone please help me? Thanks in advance.

\begin{tabular}[t]{rl}  
 \textsc{Current}  & Faculty of \textsc{Aerospace Engineering}, Master of Science \\
\textsc{Sept. 2016} & \textbf{Delft University of Technology}, Delft, Netherlands\\
\includegraphics[width=0.1\textwidth, height=14mm]{Delft_University_of_Technology_seal.png} &  Track: Control and Operations | Profile: Control and Simulation \\&\\ 
\textsc{Sept.} 2015 & Department of \textsc{Aerospace Engineering}, Bachelor of Science \\
\textsc{Sept.} 2011 & \textbf{Sharif University of Technology}, Tehran, Iran\\
\includegraphics[width=0.1\textwidth, height=14mm]{145px-Sharif_logo.svg.png} & Thesis: ``Linear Analysis on Effect of Combustion on Flame Stability \\
&in Low Swirling Flow'' | \small Advisor: Mohammad \textsc{Farshchi}\\ 
&\normalsize \textsc{Technical Gpa}: 3.92/4.00\\&\\ 
\textsc{June} 2011 & \textsc{Physics and Mathematics} School, Diploma \\ 
\textsc{Sept.} 2007 & \textbf{Farhikhtegan Pre-University and High School}, Mashhad, Iran \\
& \textsc{Overall GPA:} 4.00/4.00
\end{tabular}
  • All I am trying to do is aligning each cell of the table to the left top corner but since I have images in some of the cells it mixes up everything. – Kyana Shayan Mar 8 '17 at 22:04
  • Good luck with your job applications, or "veel succes" as they would say in Delft :) – Marijn Mar 8 '17 at 22:40
1

Or like this, with the valign option from adjustbox together with the paragraph column type p{width}, as in How to top align text and image in table?. In a paragraph cell the text is automatically split between lines if necessary, and you can insert a manual linebreak with \newline.

MWE:

\documentclass{article}
\usepackage{graphicx}
\usepackage[export]{adjustbox}
\begin{document}

\begin{tabular}[t]{rp{12cm}}  
 \textsc{Current}  & Faculty of \textsc{Aerospace Engineering}, Master of Science \\
\textsc{Sept. 2016} & \textbf{Delft University of Technology}, Delft, Netherlands\\
\includegraphics[width=0.1\textwidth, height=14mm,valign=T]{Delft_University_of_Technology_seal.png} &  Track: Control and Operations | Profile: Control and Simulation \\&\\ 
\textsc{Sept.} 2015 & Department of \textsc{Aerospace Engineering}, Bachelor of Science \\
\textsc{Sept.} 2011 & \textbf{Sharif University of Technology}, Tehran, Iran\\
\includegraphics[width=0.1\textwidth, height=14mm,valign=T]{145px-Sharif_logo.png} & Thesis: ``Linear Analysis on Effect of Combustion on Flame Stability in Low Swirling Flow'' | \small Advisor: Mohammad \textsc{Farshchi}\newline\normalsize \textsc{Technical Gpa}: 3.92/4.00\\&\\ 
\textsc{June} 2011 & \textsc{Physics and Mathematics} School, Diploma \\ 
\textsc{Sept.} 2007 & \textbf{Farhikhtegan Pre-University and High School}, Mashhad, Iran \\
& \textsc{Overall GPA:} 4.00/4.00
\end{tabular}

\end{document}

Result:

enter image description here

2

Like this, with tabularx and makecell?

\documentclass{article}
\usepackage{tabularx, makecell, graphicx}
\usepackage[showframe]{geometry}
\renewcommand{\tabularxcolumn}[1]{>{\arraybackslash}m{#1}}

\begin{document}

\noindent\begin{tabularx}{\linewidth}{@{}r>{\arraybackslash}X@{}}
 \textsc{Current} & Faculty of \textsc{Aerospace Engineering}, Master of Science \\
\textsc{Sept. 2016} & \textbf{Delft University of Technology}, Delft, Netherlands\\
\makecell{\includegraphics[width=0.1\textwidth, height=14mm]{Delft_University_of_Technology_seal.png}} & Track: Control and Operations | Profile: Control and Simulation \\&\\
\textsc{Sept.} 2015 & Department of \textsc{Aerospace Engineering}, Bachelor of Science \\
\textsc{Sept.} 2011 & \textbf{Sharif University of Technology}, Tehran, Iran\\%
\makecell{\includegraphics[width=0.1\textwidth, height=14mm]{Sharif_logo}} & Thesis: ``Linear Analysis on Effect of Combustion on Flame Stability in Low Swirling Flow'' | \small Advisor: Mohammad \textsc{Farshchi}\newline
\normalsize \textsc{Technical Gpa: 3.92/4.00}\\&\\
\textsc{June} 2011 & \textsc{Physics and Mathematics} School, Diploma \\
\textsc{Sept.} 2007 & \textbf{Farhikhtegan Pre-University and High School}, Mashhad, Iran \\
& \textsc{Overall GPA:} 4.00/4.00
\end{tabularx}

\end{document} 

enter image description here

With this simpler code, a nicer (in my opinion) layout:

\noindent\begin{tabularx}{\linewidth}{@{}r>{\arraybackslash}X@{}}
\multicolumn{2}{@{}>{\scshape}l@{}} {Sept. 2016\,–\,Current}\\[1ex]
\makecell{\includegraphics[width=0.1\textwidth, height=14mm]{Delft_University_of_Technology_seal.png}}%
 & Faculty of \textsc{Aerospace Engineering}, Master of Science \nl \textbf{Delft University of Technology}, Delft, Netherlands \nl Track: Control and Operations | Profile: Control and Simulation \\&\\
\multicolumn{2}{@{}>{\scshape}l@{}} {Sept. 2011\,–\,Sept. 2015}\\[0.5ex]
\makecell{\includegraphics[width=0.1\textwidth, height=14mm]{Sharif_logo}} & Department of \textsc{Aerospace Engineering}, Bachelor of Science \nl
\textbf{Sharif University of Technology}, Tehran, Iran\nl
Thesis: ``Linear Analysis on Effect of Combustion on Flame Stability in Low Swirling Flow'' | \small Advisor: Mohammad \textsc{Farshchi}\nl
\normalsize \textsc{Technical Gpa: 3.92/4.00}\\&\\
\multicolumn{2}{@{}>{\scshape}l@{}} {Sept. 2007\,–\,June 2011}\\[0.5ex]
& \textsc{Physics and Mathematics} School, Diploma \nl
\textbf{Farhikhtegan Pre-University and High School}, Mashhad, Iran \nl
\textsc{Overall GPA:} 4.00/4.00
\end{tabularx}

enter image description here

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.