0

I found the following MWE from karlkoeller: Appendix in scrreprt - Separate table of appendices but mentioned in original TOC

This is nearly perfect for my use only one thing needs to be changed. Instead of

A. Chapter Name

I need:

Anhang 1: Chapter Name

Using

\renewcommand{\thechapter}{Anhang~\arabic{chapter}}

will not work, as it messes with the spacing in the ToC for the Appendix. Also FYI I will only need chapters, no section etc. I would also like to have dots to to go from Anhang 1: Chapter Name ..... page number, so it matches my listoffigures, listofequations and listoftables.

I am also using custom headers which should show

Anhang 1

not the Full chapter name if possible.

Here is the MWE:

    \documentclass[12pt, numbers=noenddot,parskip, headsepline, footsepline,headings=small,]{scrreprt}

\usepackage{lipsum}
\usepackage[a4paper, includeheadfoot, left=3.5cm, right=1.7cm, top=2.5cm, bottom=2.0cm]{geometry}
\renewcommand{\floatpagefraction}{.75}%



\newcommand\appendicesname{Anlagen}
\newcommand\listofloaname{Verzeichnis der \appendicesname}
\newcommand*{\listofappendices}{\listoftoc{loa}}
\setuptoc{loa}{totoc}

\makeatletter
\g@addto@macro\appendix{%
\let\oldaddcontentsline\addcontentsline
\newcommand\hackedaddcontentsline[3]{\oldaddcontentsline{loa}{#2}{#3}}
\let\oldpart\part
\renewcommand*\part[1]{%
  \let\addcontentsline\hackedaddcontentsline%
  \oldpart{#1}%
  \let\addcontentsline\oldaddcontentsline%
}
\let\oldchapter\chapter
\renewcommand*\chapter[1]{%
  \let\addcontentsline\hackedaddcontentsline%
  \oldchapter{#1}%
  \let\addcontentsline\oldaddcontentsline%
}
\let\oldsection\section
\renewcommand*\section[1]{%
  \let\addcontentsline\hackedaddcontentsline%
  \oldsection{#1}%
  \let\addcontentsline\oldaddcontentsline%
}
\let\oldsubsection\subsection
\renewcommand*\subsection[1]{%
  \let\addcontentsline\hackedaddcontentsline%
  \oldsubsection{#1}%
  \let\addcontentsline\oldaddcontentsline%
}
\let\oldsubsubsection\subsubsection
\renewcommand*\subsubsection[1]{%
  \let\addcontentsline\hackedaddcontentsline%
  \oldsubsubsection{#1}%
  \let\addcontentsline\oldaddcontentsline%
}
}
\makeatother

\usepackage{chngcntr}
\counterwithout{figure}{chapter}
\counterwithout{equation}{chapter}
\counterwithout{table}{chapter}

\usepackage{etoolbox,refcount}
\usepackage{multicol}


\usepackage[onehalfspacing]{setspace}
\usepackage[ngerman]{babel}




\usepackage{xpatch}



%\newcommand{\HRule}{\rule{\linewidth}{0.5mm}}
%\usepackage{mathpazo}
\usepackage[automark]{scrlayer-scrpage}
\automark{chapter}

\clearpairofpagestyles
\ihead{\headmark}
\ohead{\pagemark}
\renewcommand*{\chapterpagestyle}{headings}
\renewcommand*{\chapterheadstartvskip}{\vspace*{-\topskip}}

\renewcommand{\theequation}{\arabic{equation}}
\renewcommand{\thefigure}{\arabic{figure}}
\renewcommand{\thetable}{\arabic{figure}}
\renewcommand{\topfraction}{.75}
\usepackage{enumitem}
\SetLabelAlign{LeftAlignFullWidth}{\makebox[\dimexpr\linewidth+\labelwidth\relax][l]{#1}}

\usepackage[colorlinks=true, linktocpage=true,citecolor=blue]{hyperref}

\usepackage{xcolor}
\usepackage{microtype}
\usepackage{dirtytalk}

\usepackage{graphicx}
%\usepackage{ltxtable}
%\usepackage{mathpazo}


\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}


\usepackage[nottoc]{tocbibind}
\usepackage[titles]{tocloft}



\newcommand\NoIndent[1]{%
    \par\vbox{\parbox[t]{\linewidth}{#1}}%
}


\begin{document}

\renewcommand{\cftdot}{.}   



\newcounter{savepage}
\pagenumbering{Roman}



%\cleardoublepage
\onehalfspacing
\tableofcontents
\KOMAoptions{listof=totoc,index=totoc}

\setcounter{savepage}{\value{page}}
\pagenumbering{arabic}

\chapter{Chapter 1}

\lipsum[1-5]

\section{A section}

\lipsum[1-5]

\listofappendices

\appendix
\renewcommand{\thechapter}{Anhang~\arabic{chapter}}
\chapter{This is the first Anhang}


\end{document}

UPDATE: NEW MWE adopting answer:

\documentclass[12pt, numbers=noenddot,parskip, headsepline, footsepline,headings=small,
listof=totoc,
index=totoc
]{scrreprt}

\usepackage[a4paper, includeheadfoot, left=3.5cm, right=1.7cm, top=2.5cm, bottom=2.0cm]{geometry}
\renewcommand{\floatpagefraction}{.75}%

\newcommand*{\listappendicesname}{Verzeichnis der Anlagen}

%%% see: https://komascript.de/comment/5578#comment-5578 (Markus Kohm)
\DeclareNewTOC[%
owner=\jobname,
listname=\listappendicesname,% Titel des Verzeichnisses
]{atoc}% Dateierweiterung (a=appendix, toc=table of contents)

\makeatletter
\newcommand*{\useappendixtoc}{%
    \renewcommand*{\ext@toc}{atoc}%
    \scr@ifundefinedorrelax{hypersetup}{}{% damit es auch ohne hyperref funktioniert
        \hypersetup{bookmarkstype=atoc}%
    }%
}
\ifundefinedorrelax{ext@toc}{%
    \newcommand*{\ext@toc}{toc}
    \renewcommand{\addtocentrydefault}[3]{%
        \expandafter\tocbasic@addxcontentsline\expandafter{\ext@toc}{#1}{#2}{#3}%
    }
}{}

\AfterTOCHead[atoc]{%
    % add the appendix TOC to the main TOC:
    {\def\ext@toc{toc}\addchaptertocentry{}{\listappendicesname}}
    \KOMAoptions{toc=nonumberline}
}
\makeatother

\usepackage{xpatch}% loads also etoolbox
\xapptocmd{\appendix}
{
    \useappendixtoc
    \listofatocs
    \renewcommand\chapterformat{\appendixname\ \thechapter:\enskip}%
    \renewcommand\thechapter{\arabic{chapter}}%
    \xpatchcmd{\addchaptertocentry}
    {\addtocentrydefault{chapter}{#1}{#2}}
    {\addtocentrydefault{chapter}{}{\appendixname\ #1:\ #2}}
    {}{\PatchFailed}
    \renewcommand\chaptermark[1]{\markboth{\chaptermarkformat}{\chaptermarkformat}}
    \renewcommand\chaptermarkformat{\appendixname\ \thechapter\autodot}
}
{}{\PatchFailed}


\usepackage{chngcntr}
\counterwithout{figure}{chapter}
\counterwithout{equation}{chapter}
\counterwithout{table}{chapter}

\usepackage{refcount}
\usepackage{multicol}

\usepackage[onehalfspacing]{setspace}
\usepackage[ngerman]{babel}
\usepackage{blindtext}% only for dummy text

\usepackage{scrlayer-scrpage}% sets pagestyle scrheadings; headings is only a synonym
\automark[chapter]{chapter}
\clearpairofpagestyles
\ihead{\headmark}
\ohead{\pagemark}

\RedeclareSectionCommand[beforeskip=-1sp minus -1sp]{chapter}% no skip before the chapter title

\renewcommand{\topfraction}{.75}
\usepackage{enumitem}
\SetLabelAlign{LeftAlignFullWidth}{\makebox[\dimexpr\linewidth+\labelwidth\relax][l]{#1}}

\usepackage{xcolor}
\usepackage{microtype}
\usepackage{dirtytalk}% in TeXLive but not in MiKTeX

\usepackage{graphicx}

\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}

\usepackage[colorlinks=true, linktocpage=true,citecolor=blue]{hyperref}% load as last package

\newcommand\NoIndent[1]{%
    \par\vbox{\parbox[t]{\linewidth}{#1}}%
}
\newcounter{savepage}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%Added To MWE
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{amsmath}

\DeclareNewTOC[%
tocentryindent=0pt,% kein Einzug im Verzeichnis
tocentrynumwidth=2em,% Einzug für den Text im Verzeichnis
type=equation
]{loe}
\AtBeginDocument{\renewcaptionname{ngerman}{\contentsname}{Inhalt}
    \newcaptionname{ngerman}\equationname{Formel}% 
    \newcaptionname{ngerman}\listequationname{Verzeichnis der Formeln}
    \renewcaptionname{ngerman}{\listfigurename}{Verzeichnis der Abbildungen}    %Figures
    \renewcaptionname{ngerman}{\listtablename}{Verzeichnis der Tabellen}        %Tables
    \renewcaptionname{ngerman}{\figurename}{Abb.}               %Figure
    \renewcaptionname{ngerman}{\tablename}{Tab.}                %Table
    \renewcaptionname{ngerman}{\bibname}{Verzeichnis der Literatur}             %Bibliography
    \newcaptionname{ngerman}{\lstlistlistingname}{Quelltexte} %Table of listings 
    \newcaptionname{ngerman}{\lstlistingname}{Quelltext}  }%


\makeatletter
\newcommand*{\@currententry}{}
% Zwei amsmath-Anweisungen ändern:
\g@addto@macro\make@display@tag{\set@currententry}%
\def\tagform@#1{\maketag@@@{(\ignorespaces#1\unskip\@@italiccorr)}%
    \set@currententry}
\newcommand*{\set@currententry}{%
    \typeout{set current entry}%
    \ifx\@currententry\@empty\else
    \addcontentsline{loe}{equation}{\protect\numberline{\@currentlabel}%
        \@currententry}%
    \global\let\@currententry\@empty
    \fi
}
% Neue Benutzeranweisung
\newcommand*{\equationentry}[1]{%
    \gdef\@currententry{#1}%
}
\makeatother
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%Added To MWE
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
    \pagenumbering{Roman}
\tableofcontents
\listofequations
\listoffigures
\listoftables
    \setcounter{savepage}{\value{page}}

    \cleardoublepage
    \pagenumbering{arabic}

    %   \blinddocument
    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
    %Added To MWE
    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
    \chapter{Kapitel 1}
    \begin{equation}\label{eq:Eq1}\equationentry{P-Anteil}
    a=b
    \end{equation}
    \newpage

    \centering% center the table
    \captionaboveof{table}{My caption}
    \label{my-label}
    \begin{tabular}{lllll}
        & \multicolumn{2}{l}{XYZ} & \multicolumn{2}{l}{ABC} \\
        & Sex         & P         & Sex         & P         \\
        AGE1 & 0.5         & 1         & 0.6         & 1         \\
        &             &           &             &          
    \end{tabular}


    \begin{figure}
        Test Figure
        \caption{No Intend Here} \label{fig:LableTest}
    \end{figure}

    \begin{figure}
    Test Figure
    \caption{No Intend Here} \label{fig:LableTest2}
\end{figure}
%   \blinddocument
        \begin{equation}\label{eq:Eq2}\equationentry{P-Anteil}
    a=b
    \end{equation}

        \begin{equation}\label{eq:3}\equationentry{P-Anteil}
    a=b
    \end{equation}

    \chapter{Kapitel 2}

            \begin{equation}\label{eq:Eq4}\equationentry{P-Anteil}
    a=b
    \end{equation}

    \begin{equation}\label{eq:5}\equationentry{P-Anteil}
    a=b
    \end{equation}

        \centering% center the table
    \captionaboveof{table}{My caption}
    \label{my-label2}
    \begin{tabular}{lllll}
        & \multicolumn{2}{l}{XYZ} & \multicolumn{2}{l}{ABC} \\
        & Sex         & P         & Sex         & P         \\
        AGE1 & 0.5         & 1         & 0.6         & 1         \\
        &             &           &             &          
    \end{tabular}


    \begin{figure}
        Test Figure
        \caption{No Intend Here} \label{fig:LableTest3}
    \end{figure}
    \blinddocument
    \appendix



\end{document}
2

Do not use package tocloft together with a KOMA-Script class. There is also no need to load package tocbibind.

Suggestion:

\documentclass[12pt, numbers=noenddot,parskip, headsepline, footsepline,headings=small,
  listof=totoc,
  index=totoc
]{scrreprt}

\usepackage[a4paper, includeheadfoot, left=3.5cm, right=1.7cm, top=2.5cm, bottom=2.0cm]{geometry}
\renewcommand{\floatpagefraction}{.75}%

\newcommand*{\listappendicesname}{Verzeichnis der Anlagen}

%%% see: https://komascript.de/comment/5578#comment-5578 (Markus Kohm)
\DeclareNewTOC[%
  owner=\jobname,
  listname=\listappendicesname,% Titel des Verzeichnisses
]{atoc}% Dateierweiterung (a=appendix, toc=table of contents)

\makeatletter
\newcommand*{\useappendixtoc}{%
  \renewcommand*{\ext@toc}{atoc}%
  \scr@ifundefinedorrelax{hypersetup}{}{% damit es auch ohne hyperref funktioniert
    \hypersetup{bookmarkstype=atoc}%
  }%
}
\ifundefinedorrelax{ext@toc}{%
  \newcommand*{\ext@toc}{toc}
  \renewcommand{\addtocentrydefault}[3]{%
    \expandafter\tocbasic@addxcontentsline\expandafter{\ext@toc}{#1}{#2}{#3}%
  }
}{}

\AfterTOCHead[atoc]{%
  % add the appendix TOC to the main TOC:
  {\def\ext@toc{toc}\addchaptertocentry{}{\listappendicesname}}
  \KOMAoptions{toc=nonumberline}
}
\makeatother

\usepackage{xpatch}% loads also etoolbox
\xapptocmd{\appendix}
  {
  \useappendixtoc
  \listofatocs
  \renewcommand\chapterformat{\appendixname\ \thechapter:\enskip}%
  \renewcommand\thechapter{\arabic{chapter}}%
  \xpatchcmd{\addchaptertocentry}
      {\addtocentrydefault{chapter}{#1}{#2}}
      {\addtocentrydefault{chapter}{}{\appendixname\ #1:\ #2}}
      {}{\PatchFailed}
  \renewcommand\chaptermark[1]{\markboth{\chaptermarkformat}{\chaptermarkformat}}
  \renewcommand\chaptermarkformat{\appendixname\ \thechapter\autodot}
  }
  {}{\PatchFailed}


\usepackage{chngcntr}
\counterwithout{figure}{chapter}
\counterwithout{equation}{chapter}
\counterwithout{table}{chapter}

\usepackage{refcount}
\usepackage{multicol}

\usepackage[onehalfspacing]{setspace}
\usepackage[ngerman]{babel}
\usepackage{blindtext}% only for dummy text

\usepackage{scrlayer-scrpage}% sets pagestyle scrheadings; headings is only a synonym
\automark[chapter]{chapter}
\clearpairofpagestyles
\ihead{\headmark}
\ohead{\pagemark}

\RedeclareSectionCommand[beforeskip=-1sp minus -1sp]{chapter}% no skip before the chapter title

\renewcommand{\topfraction}{.75}
\usepackage{enumitem}
\SetLabelAlign{LeftAlignFullWidth}{\makebox[\dimexpr\linewidth+\labelwidth\relax][l]{#1}}

\usepackage{xcolor}
\usepackage{microtype}
\usepackage{dirtytalk}% in TeXLive but not in MiKTeX

\usepackage{graphicx}

\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}

\usepackage[colorlinks=true, linktocpage=true,citecolor=blue]{hyperref}% load as last package

\newcommand\NoIndent[1]{%
    \par\vbox{\parbox[t]{\linewidth}{#1}}%
}
\newcounter{savepage}

\begin{document}
\pagenumbering{Roman}
\tableofcontents
\listoffigures
\listoftables
\setcounter{savepage}{\value{page}}

\cleardoublepage
\pagenumbering{arabic}
\blinddocument

\appendix
\blinddocument
\end{document}

enter image description here

enter image description here

enter image description here

enter image description here

  • This is great! Thank you so mich for your effort, I appreciate it! Could you have a look at my updated MWE with your solution + and added list of equations? I would need the listoffig and listoftab to be formatted the same way, basically without the intend of each separate line. Would there be a possibility to have to chapter gab between each element, as it somehow makes no sense without the chapter sensitive numbering of elements. – Redfox87678 Jul 18 '17 at 9:54
  • I think, asking a follow up question with a link to this question here would be better then editing the oirginal question. And maybe you can accept the answer if it solves your original issue. – esdd Jul 18 '17 at 11:00
  • Maybe one more small follow up q: Is there a way to get the chapter headings for the Appendix even smaller, so I have more space for my appendix items? – Redfox87678 Jul 18 '17 at 14:42
  • Posted it here: tex.stackexchange.com/questions/381190/… – Redfox87678 Jul 18 '17 at 15:12

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.