I used the answers given here Replace (change) “Chapter 1” to “Chapter ONE” without affecting lof and lot but it does not work for me as I want. I an typing report class and I will like to reference chapters and will not want "Chapter ONE" to show up where I reference it within text but I will prefer "Chapter 1" instead.
\documentclass[a4paper,12]{report}
\usepackage[left=2cm,right=2cm,top=2cm,bottom=2cm]{geometry}
\usepackage{amssymb,amsfonts,amsmath,graphicx,autobreak}
\usepackage{changepage,mathtools,amsthm,tikz,blindtext}
\usepackage{inputenc,float,caption,subcaption,enumitem}
\usepackage[font=large,labelfont=bf,font=bf,labelsep=space]{caption}
\usepackage[font=small,labelfont=bf,font=bf,labelsep=space]{subcaption}
\usepackage{csquotes} %for single quoatation mark
\setlength{\parskip}{1ex plus 0.5ex minus 0.2ex}
\linespread{1.5}
\setlength{\parskip}{1ex plus 0.5ex minus 0.2ex}
\usepackage[authoryear]{natbib}
\usepackage[]{color}
\usepackage[english]{babel}
% the below format chapter header
\usepackage{titlesec}
\usepackage[tracking=true]{microtype}
\titleformat{\chapter}[display]
{\centering\normalfont\huge\bfseries}
{\filcenter{\MakeUppercase{\textls[400]
{\chaptertitlename}}\ \thechapter}}{20pt}{\Huge}
\usepackage{tocloft}
\usepackage{fmtcount}
\renewcommand{\bibname}{References}
%%% fit Table 4.3 to page %%%%%
\usepackage{adjustbox}
\usepackage[section]{placeins}
\usetikzlibrary{shapes.geometric,arrows}
\renewcommand{\bibname}{REFERENCES}
\DeclareMathOperator{\var}{\mathbb{V}ar}
\DeclareMathOperator{\cov}{\mathbb{C}ov}
\DeclareMathOperator{\expect}{\mathbb{E}}
\DeclareMathOperator{\corr}{Corr}
\DeclareMathOperator{\ARIMA}{\mathbb{ARIMA}}
\DeclareMathOperator{\AR}{\mathbb{AR}}
\DeclareMathOperator{\MA}{\mathbb{MA}}
\DeclareMathOperator{\ARMA}{\mathbb{ARMA}}
\DeclareMathOperator{\R}{\mathbb{R}}
\setlength{\parskip}{1ex plus 0.5ex minus 0.2ex}
\linespread{1.5}
\setlength{\parskip}{1ex plus 0.5ex minus 0.2ex}
\usepackage{amsmath}
\usepackage[T1]{fontenc}
\usepackage{lmodern}
\def\bsq#1{%both single quotes
\lq{#1}\rq}
%%%the below with \tag{\stepcounter{equation}\theequation}\\ in the
%document allow page brake for equation
%\usepackage[b]{esvect} %
%\allowdisplaybreaks
% the below changes chapter 1 to chapter one
\usepackage{xpatch}% http://ctan.org/pkg/etoolbox
\usepackage{fmtcount}% http://ctan.org/pkg/fmtcount
\renewcommand{\thechapter}{\NUMBERstring{chapter}}
\renewcommand{\thesection}{\arabic{chapter}.\arabic{section}}
\renewcommand\theequation{\arabic{equation}}
\makeatletter
\xpatchcmd{\@chapter}% <cmd>
{\numberline{\thechapter}}% <search>
{\@chapapp~\thechapter\quad}% <replace>
{}{}% <success><failure>
\makeatother
\usepackage{afterpage}
%to add page on top of page numbers in toc after its first page
\usepackage{tocloft}
% patch \@makechapterhead
\usepackage{etoolbox}
\makeatletter
\patchcmd{\@makechapterhead}
{\thechapter}
{\NUMBERstring{chapter}}
{}{}
\makeatother
\begin{document}
\newpage\pagenumbering{arabic}
\newpage
\renewcommand\contentsname{\hfill Table of Contents \hfil}
\tableofcontents
\addtocontents{toc}{~\hfill\textbf{Page}\par}
\addtocontents{toc}{\protect\afterpage{~\hfill\textbf{Page}\par\medskip}}%
\newpage
\listoftables
\newpage
\listoffigures
\begin{abstract}
\blindtext
\end{abstract}
\chapter{INTRODUCTION} \label{ch1}
\section{Background of Study} \label{sc1}
\begin{figure}[H]
A
\caption{A figure} \label{fg1}
\end{figure}
\begin{table}[H]
\centering
\caption{Table A}
\label{tab1}
\resizebox{\textwidth}{!}{%
\begin{tabular}{|c|c|}
\hline
\rule[-1ex]{0pt}{2.5ex} A & B \\
\hline
\rule[-1ex]{0pt}{2.5ex} 1 & 2 \\
\hline
\end{tabular}
}
\end{table}
\section{Brief Overview of the study } \label{sc11}
\begin{figure}[H]
AA
\caption{A figure} \label{fg11}
\end{figure}
\begin{table}[H]
\centering
\caption{Table AA}
\label{tab11}
\resizebox{\textwidth}{!}{%
\begin{tabular}{|c|c|}
\hline
\rule[-1ex]{0pt}{2.5ex} AA & BB \\
\hline
\rule[-1ex]{0pt}{2.5ex} 11 & 22 \\
\hline
\end{tabular}
}
\end{table}
\chapter{LITERATURE REVIEW} \label{ch2}
\section{Introduction} \label{sc2}
\begin{figure}[H]
B
\caption{B figure} \label{fg2}
\end{figure}
\begin{table}[H]
\centering
\caption{Table B}
\label{tab2}
\resizebox{\textwidth}{!}{%
\begin{tabular}{|c|c|}
\hline
\rule[-1ex]{0pt}{2.5ex} C & D \\
\hline
\rule[-1ex]{0pt}{2.5ex} 3 & 4 \\
\hline
\end{tabular}
}
\end{table}
\chapter{METHODOLOGY} \label{ch3}
\section{Introduction} \label{sc3}
\begin{figure}[H]
C
\caption{C figure} \label{fg3}
\end{figure}
\begin{table}[H]
\centering
\caption{Table C}
\label{tab3}
\resizebox{\textwidth}{!}{%
\begin{tabular}{|c|c|}
\hline
\rule[-1ex]{0pt}{2.5ex} E & F \\
\hline
\rule[-1ex]{0pt}{2.5ex} 5 & 6 \\
\hline
\end{tabular}
}
\end{table}
\chapter{CONCLUSION}
\section{Introduction}
I shall refer to Table \ref{tab1} of Section \ref{sc1} as well as Figure
\ref{fg11} and Table \ref{tab11} of Section \ref{sc11} all in Chapter
\ref{ch1} and Table \ref{tab2} of Section \ref{sc2} in Chapter \ref{ch3}
which will show Figure \ref{fg3} of Section \ref{sc3} in Chapter \ref{ch3}
\end{document}
it works in your MWE but when I put it in my own complete working environment it does run without error yet the list of tables, the list of figures and the inline references look like this pictures attached as you can see in when you run my MWE.
the list of figures looks like this
and the in-text reference looks like this
I want the in-text reference of chapters to carry Arabic numbering like "chapter 1", "chapter 2" and so on while the chapter header numbering to be in word like "CHAPTER ONE", "CHAPTER TWO" and so on and my inline reference of chapter to be in arabic and not in words.
please help me
\@makechapterheadby the usage oftitlesec-- none of the linked answers however usestitlesec-- no wonder that you get into problems