1

Documentclass memoir. Did the design of the head thus:

\documentclass[a4paper,12pt,small, openany,twoside]{memoir}
\usepackage[T2A]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[english,russian]{babel}
\usepackage{misccorr}
\usepackage{cmap}
\frenchspacing
\usepackage{indentfirst}
\usepackage{microtype}
\usepackage{amssymb,amsfonts,amsmath}
\usepackage{cite,float,textcomp,setspace}
\usepackage{txfonts}
\usepackage{paratype}

\usepackage{ArtNouv}
\usepackage{lettrine}
\renewcommand{\LettrineFontHook}{\ArtNouvfamily{}}  
\setcounter{DefaultLines}{3}
\usepackage{tikz}
\usepackage{pgfornament}
\usetikzlibrary{chains}
\usepackage[pdflatex]{graphicx,xcolor}
\graphicspath{{grafika/}} 
\usepackage[explicit]{titlesec}
\usepackage{titletoc} 
\usepackage{lipsum}
\usepackage{shorttoc}
\usepackage{multicol}
\usepackage{calc}
\DeclareRobustCommand{\redstar}{$\textcolor[rgb]{.87,0,0}{\bigstar}$}
\DeclareRobustCommand{\lquercus}{\pgfornament[height=0.7cm,color=green!45!black,ydelta=-6pt]{79}}
\DeclareRobustCommand{\rquercus}{\pgfornament[height=0.7cm,symmetry=v,color=green!45!black,ydelta=-6pt]{79}}
\makeatletter
\def\@makechapterhead#1{%
 \vspace*{0\p@}
  \setlength{\fboxsep}{1.0mm}
   \setlength{\fboxrule}{0.7mm}\noindent\fbox{%
    \setlength{\fboxsep}{2.0mm}%
    \setlength{\fboxrule}{0.5mm}%
   \framebox[\textwidth-13.0pt][c]{\hspace*
{0.25\parindent}\Large\bfseries\MakeUppercase
{\lquercus\redstar\rquercus~~\@chapapp  
\thechapter\hfill#1~~\lquercus\redstar\rquercus}\hspace*
{0.25\parindent}}}
\par\nobreak
\vskip 10\p@}
\makeatother

\usepackage[paper=a4paper, verbose, centering]{geometry}
\geometry{left=10mm}
\geometry{right=10mm}
\geometry{top=15mm}
\geometry{bottom=15mm}
\pagestyle{plain}

\usepackage{enumitem} 
\setlist{nolistsep} 

\setcounter{secnumdepth}{4}
\setcounter{tocdepth}{4}
\titlespacing*{\chapter}{0pt}{-30pt}{0pt}
\AtBeginDocument{\renewcommand\contentsname{\Large\bfseries Подробное содержание}}  
\contentsmargin{0cm} 

\titlecontents{chapter}[1.25cm] 
{\addvspace{8pt}\normalsize\sffamily\bfseries} 
{\contentslabel[\normalsize\thecontentslabel]{1.5cm}} 
{}  
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 

\titlecontents{section}[1.25cm] 
{\addvspace{3pt}\small\sffamily\bfseries} 
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\titlecontents{subsection}[1.25cm] 
{\addvspace{1pt}\small\sffamily\small}
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\titlecontents{subsubsection}[1.25cm] 
{\addvspace{1pt}\small\sffamily\small} 
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\makeatletter
\renewcommand\tableofcontents{%
\null\hfill\textbf{\Large\contentsname}\hfill\null\par
\@mkboth{\MakeUppercase\contentsname}{\MakeUppercase\contentsname}
\@starttoc{toc}%
}
\makeatother 

\makeatletter
\renewcommand\tableofcontents{
\setlength\columnsep{10mm}
\begin{multicols}{2}[
\chapter*{\centering\Large\contentsname   
    \@mkboth{
       \MakeUppercase\contentsname}{\MakeUppercase\contentsname}}]
\@starttoc{toc}
\end{multicols}}
\makeatother  

\usepackage[normalem]{ulem} 
\ULdepth = 0.16em 
\usepackage{pdf14}
\usepackage[unicode,bookmarksopen=true]{hyperref}
\doublehyphendemerits=1000000
\finalhyphendemerits=10000
\clubpenalty=10000
\widowpenalty=10000


\begin{document}
\begin{titlepage}
...
\end{titlepage}
\clearpage

\renewcommand{\chaptername}{\textsection~}
\shorttoc{\centerline{\large{\bfseries{Краткое содержание}}}}{0}

\chapter{С чего начать\ldots} % this \chapter should be \chapter*
\lettrine[findent=3pt, nindent =0pt]{B}{э}том документе (my text)

\chapter{Первые блюда}
\noindent                    % minitoc two columns
\makebox[1.01\textwidth]{
{\begin{minipage}{\dimexpr\textwidth-7\mboxsep-3\mboxrule\relax}
\centering
\setlength\columnsep{10mm}
\begin{multicols}{2}
\startcontents[chapters]
\printcontents[chapters]{}{1}{}
\end{multicols}\\
\phantom{123}\\
\end{minipage}}
}

\lettrine[findent=3pt, nindent =0pt]{P}{а}ньше я (my text)
\phantom{\lipsum[1]}
\vspace{-7mm}
\section{1}
\subsection{1.1}
(my text)

\chapter{2} 
\noindent     % minitoc one column 
\makebox[1.01\textwidth]{
{\begin{minipage}{\dimexpr\textwidth-7\mboxsep-3\mboxrule\relax}
\centering
\startcontents[chapters]
\printcontents[chapters]{}{1}{}
\\
\phantom{123}\\
\end{minipage}}
}

\lettrine[findent=3pt, nindent =0pt]{O}{б} этой (my text)
\phantom{\lipsum[5]}
\vspace{-7mm}
\section1 \subsection1 \subsubsection1 (my text)
...
\chapter{10}
\clearpage  
\tableofcontents
\end{document}

Result:enter image description here How can you make the same design for \chapter*, \shorttoc and \tableofcontents?

P.S. I fixed his post, pointed to the preamble and the structure of the document.

The document is compiled, but how to make a header appearance \chapter*, \shorttoc and \tableofcontents similar to the design of the title \chapter?..

Unfortunately, I'm only a user, not a developer.

Texmaker 5.0.2, TeXLive 2017 (updated 2016), Slackware 14.2.

2
  • 1
    Please make your code snippets compilable
    – Mensch
    Mar 11, 2018 at 6:39
  • titlesec and memoir? Really?
    – user31729
    Mar 11, 2018 at 8:39

3 Answers 3

1

The problem is solved. I made the design of the Chapter this way (I have cleaned the preamble, so I will give the code completely):

\documentclass[a4paper,12pt,small,openany,twoside]{memoir}
\usepackage[T2A]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[english,russian]{babel}
\usepackage{misccorr}
\usepackage{cmap}
\frenchspacing
\usepackage{indentfirst}
\usepackage{microtype}
\usepackage{amssymb,amsfonts,amsmath}
\usepackage{cite,float,textcomp,setspace}
\usepackage{txfonts}
\usepackage{paratype}

\usepackage{ArtNouv}
\usepackage{lettrine}
\renewcommand{\LettrineFontHook}{\ArtNouvfamily{}}  
\setcounter{DefaultLines}{3}
\usepackage{tikz}
\usepackage{pgfornament}
\usetikzlibrary{chains}
\usepackage[pdflatex]{graphicx,xcolor}
\graphicspath{{grafika/}} 
\usepackage[explicit]{titlesec}
\usepackage{titletoc} 
\usepackage{lipsum}
\usepackage{multicol}
\usepackage{calc}

\DeclareRobustCommand{\redstar}{$\textcolor[rgb]{.87,0,0}{\bigstar}$}
\DeclareRobustCommand{\lquercus}{\pgfornament[height=0.7cm,color=green!45!black,ydelta=-6pt]{79}}
\DeclareRobustCommand{\rquercus}{\pgfornament[height=0.7cm,symmetry=v,color=green!45!black,ydelta=-6pt]{79}}

\renewcommand{\ornament}{\lquercus\redstar\rquercus}

\makeatletter

\def\@makechapterhead#1{
\vspace*{0\p@}
  {\parindent \z@ \position \reset@font
    \setlength{\fboxsep}{1.0mm}
    \setlength{\fboxrule}{0.5mm}
    \fcolorbox{black}{gray!10}{%
    \setlength{\fboxsep}{1.0mm}%
    \setlength{\fboxrule}{0mm}%
    \framebox[\textwidth-10pt][c]{
    {\Large\bfseries\ornament\ \ \ 
\chaptername\,\!\thechapter\hfill#1\ \ \ \ornament\par\nobreak}
    }}
    \par\nobreak
    \vskip 13\p@ 
}}

\def\@makeschapterhead#1{
\vspace*{0\p@}
  {\parindent \z@ \position \reset@font
    \setlength{\fboxsep}{1.0mm}
    \setlength{\fboxrule}{0.5mm}
    \fcolorbox{black}{gray!10}{%
    \setlength{\fboxsep}{1.0mm}%
    \setlength{\fboxrule}{0mm}%
    \framebox[\textwidth-10pt][c]{
    {\Large\bfseries\ornament\hfill#1\hfill\ornament\par\nobreak}
    }}
    \par\nobreak
    \vskip 25\p@ 
}}

\makeatother 

\usepackage{geometry}
\geometry{left=10mm}
\geometry{right=10mm}
\geometry{top=10mm}
\geometry{bottom=15mm}
\pagestyle{plain}

\usepackage{enumitem}  
\renewcommand{\theenumi}{\arabic{enumi}}
\renewcommand{\labelenumi}{\arabic{enumi}}
\renewcommand{\theenumii}{.\arabic{enumii}}
\renewcommand{\labelenumii}{\arabic{enumi}.\arabic{enumii}.}
\renewcommand{\theenumiii}{.\arabic{enumiii}}
\renewcommand{\labelenumiii}{\arabic{enumi}.\arabic{enumii}.\arabic{enumiii}.}

\setcounter{secnumdepth}{3}
\setcounter{tocdepth}{3}
\AtBeginDocument{\renewcommand\contentsname{\Large\bfseries С\,О\,Д\,Е\,Р\,Ж\,А\,Н\,И\,Е}}  
\contentsmargin{0cm} 

\titlecontents{chapter}[1.25cm] 
{\addvspace{8pt}\normalsize\sffamily\bfseries} 
{\contentslabel[\normalsize\thecontentslabel]{1.5cm}} 
{}  
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 

\titlecontents{section}[1.25cm] 
{\addvspace{3pt}\small\sffamily\amall} 
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\titlecontents{subsection}[1.25cm] 
{\addvspace{1pt}\small\sffamily\small}
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\titlecontents{subsubsection}[1.25cm] 
{\addvspace{1pt}\small\sffamily\small} 
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\makeatletter
\renewcommand\tableofcontents{%
\setlength\columnsep{10mm}
\begin{multicols}{2}[
  \chapter*{\contentsname   
    \@mkboth{%
       \MakeUppercase\contentsname}{\MakeUppercase\contentsname}}]
\@starttoc{toc}%
\end{multicols}}
\makeatother  

\usepackage[normalem]{ulem} 
\ULdepth = 0.16em 
\usepackage{pdf14}
\usepackage[unicode,bookmarksopen=true]{hyperref}

\doublehyphendemerits=1000000
\finalhyphendemerits=10000
\clubpenalty=10000
\widowpenalty=10000

Result: enter image description here

Variant macros for obtaining double frame:

\makeatletter

\def\@makechapterhead#1{
\vspace*{0\p@}
 {\parindent \z@ \position \reset@font
    \setlength{\fboxsep}{1.5mm}
    \setlength{\fboxrule}{0.5mm}
    \fcolorbox{black}{gray!10}{% 
    \setlength{\fboxsep}{1.0mm}%
    \setlength{\fboxrule}{0.3mm}%
    \framebox[\textwidth-11pt][c]{
    {\Large\bfseries\ \ornament\ \ \chaptername\,\!\thechapter\hfill#1\ \ \ornament\ \par\nobreak}
    }}
    \par\nobreak
    \vskip 13\p@ 
 }}

 \def\@makeschapterhead#1{
 \vspace*{0\p@}
  {\parindent \z@ \position \reset@font
    \setlength{\fboxsep}{1.5mm}
    \setlength{\fboxrule}{0.5mm}
    \fcolorbox{black}{gray!10}{% 
    \setlength{\fboxsep}{1.0mm}%
    \setlength{\fboxrule}{0.3mm}%
    \framebox[\textwidth-11pt][c]{
    {\Large\bfseries\ \ornament\hfill#1\hfill\ornament\ \par\nobreak}
    }}
    \par\nobreak
    \vskip 25\p@ 
 }}

\makeatother 

Result: enter image description here

But the package shorttoc not friends with a decorative design --- elements move away to the side. To use shorttoc you have to remove them:

\makeatletter

\def\@makechapterhead#1{
\vspace*{0\p@}
 {\parindent \z@ \position \reset@font
    \setlength{\fboxsep}{1.0mm}
    \setlength{\fboxrule}{0.5mm}
    \fcolorbox{black}{gray!10}{%
    \setlength{\fboxsep}{1.0mm}%
    \setlength{\fboxrule}{0mm}%
    \framebox[\textwidth-10pt][c]{
   {\Large\bfseries\chaptername\,\!\thechapter\hfill#1\par\nobreak}
    }}
    \par\nobreak
    \vskip 13\p@ 
 }}

 \def\@makeschapterhead#1{
 \vspace*{0\p@}
  {\parindent \z@ \position \reset@font
    \setlength{\fboxsep}{2.0mm}
    \setlength{\fboxrule}{0.5mm}
    \fcolorbox{black}{gray!10}{%
    \setlength{\fboxsep}{1.0mm}%
    \setlength{\fboxrule}{0mm}%
    \framebox[\textwidth-10pt][c]{
    {\Large\bfseries\hfill#1\hfill\par\nobreak}
    }}
    \par\nobreak
    \vskip 25\p@ 
 }}

\makeatother

Here's what happened: enter image description here

There is a choice: or decorative elements, or \shorttoc.

P.S. A macro from my question is also compiled with this corrected preamble:

\makeatletter
\def\@makechapterhead#1{%
 \vspace*{0\p@}
  \setlength{\fboxsep}{1.0mm}
   \setlength{\fboxrule}{0.7mm}\noindent\fbox{%
   \setlength{\fboxsep}{2.0mm}%
   \setlength{\fboxrule}{0.5mm}%
   \framebox[\textwidth-11pt][c]{\hspace*{0.25\parindent}\Large\bfseries\MakeUppercase
{\ornament\ \ \@chapapp  \thechapter\hfill#1\ \ \ornament}\hspace*{0.25\parindent}}}
\par\nobreak
\vskip 10\p@}
\makeatother

\makeatletter
\def\@makeschapterhead#1{%
 \vspace*{0\p@}
  \setlength{\fboxsep}{1.0mm}
   \setlength{\fboxrule}{0.7mm}\noindent\fbox{%
    \setlength{\fboxsep}{2.0mm}%
    \setlength{\fboxrule}{0.5mm}%
    \framebox[\textwidth-11pt][c]{\hspace*{0.25\parindent}\Large\bfseries\MakeUppercase
{\ornament\hfill#1\hfill\ornament}\hspace*{0.25\parindent}}}
\par\nobreak
\vskip 10\p@}
\makeatother

The result of the compilation: enter image description here

P.P.S. Managed to solve the problem with a decorative design \shorttoc. For this I added to the preamble package etoolbox:

\usepackage{shorttoc}
\usepackage{etoolbox}

And where there should be shorttoc:

\begin{document}
\titlepage

\makeatletter
{\patchcmd{\l@chapter}{\vskip 0em \@plus\p@}{}{}
{\errmessage{paching \string\l@chapter fail}}
\patchcmd{\l@chapter}{\addvspace{0em \@plus\p@}}{}{}
{\errmessage{paching \string\l@chapter fail}}
\shorttoc{Краткое содержание}{0}}
\makeatother

The result of these actions: enter image description here

The question is settled.

1
  • Thanks Dmitriy, you solved a problem I had been struggling with for several days! :)
    – pdini
    Jun 17, 2020 at 18:05
0

Here is the code for this document:

\documentclass[a4paper,12pt,small, openany,twoside]{memoir}
\usepackage[T2A]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[english,russian]{babel}
\usepackage{misccorr}
\usepackage{cmap}
\frenchspacing
\usepackage{indentfirst}
\usepackage{microtype}
\usepackage{amssymb,amsfonts,amsmath}
\usepackage{cite,float,textcomp,setspace}
\usepackage{txfonts}
\usepackage{paratype}

\usepackage{ArtNouv}
\usepackage{lettrine}
\renewcommand{\LettrineFontHook}{\ArtNouvfamily{}} 
\setcounter{DefaultLines}{3}
\usepackage{tikz}
\usepackage{pgfornament}
\usetikzlibrary{chains}
\usepackage[pdflatex]{graphicx,xcolor}
\graphicspath{{grafika/}} 
\usepackage[explicit]{titlesec}
\usepackage{titletoc} 
\usepackage{lipsum}
\usepackage{shorttoc}
\usepackage{multicol}
\usepackage{calc}
\DeclareRobustCommand{\redstar}{$\textcolor[rgb]{.87,0,0}{\bigstar}$}
\DeclareRobustCommand{\lquercus}{\pgfornament[height=0.7cm,color=green!45!black,ydelta=-6pt]{79}}
\DeclareRobustCommand{\rquercus}{\pgfornament[height=0.7cm,symmetry=v,color=green!45!black,ydelta=-6pt]{79}}
\makeatletter
\def\@makechapterhead#1{%
 \vspace*{0\p@}
  \setlength{\fboxsep}{1.0mm}
   \setlength{\fboxrule}{0.7mm}\noindent\fbox{%
    \setlength{\fboxsep}{2.0mm}%
    \setlength{\fboxrule}{0.5mm}%
    \framebox[\textwidth-13.0pt][c]{\hspace*
{0.25\parindent}\Large\bfseries\MakeUppercase
    {\lquercus\redstar\rquercus~~\@chapapp  \thechapter\hfill#1~~\lquercus\redstar\rquercus}\hspace*{0.25\parindent}}}
    \par\nobreak
    \vskip 10\p@}
\makeatother
\usepackage[paper=a4paper, verbose, centering]{geometry}
\geometry{left=10mm}
\geometry{right=10mm}
\geometry{top=15mm}
\geometry{bottom=15mm}
\pagestyle{plain}

\usepackage{enumitem} 
\setlist{nolistsep} 

\setcounter{secnumdepth}{4}
\setcounter{tocdepth}{4}
\titlespacing*{\chapter}{0pt}{-30pt}{0pt} % for shorttoc
\AtBeginDocument{\renewcommand\contentsname{\large\bf Подробное содержание}}  
\contentsmargin{0cm} 

\titlecontents{chapter}[1.25cm] 
{\addvspace{8pt}\normalsize\sffamily\bfseries} 
{\contentslabel[\normalsize\thecontentslabel]{1.5cm}} 
{}  
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 

\titlecontents{section}[1.25cm] 
{\addvspace{3pt}\small\sffamily\bfseries} 
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\titlecontents{subsection}[1.25cm] 
{\addvspace{1pt}\small\sffamily\small}
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\titlecontents{subsubsection}[1.25cm] 
{\addvspace{1pt}\small\sffamily\small} 
{\contentslabel[\thecontentslabel]{1.5cm}} 
{}
{\ \titlerule*[.5pc]{.}\;\thecontentspage} 
[]

\makeatletter
\renewcommand\tableofcontents{%
\null\hfill\textbf{\large\contentsname}\hfill\null\par
\@mkboth{\MakeUppercase\contentsname}{\MakeUppercase\contentsname}
\@starttoc{toc}%
}
\makeatother 

\makeatletter
\renewcommand\tableofcontents{
\setlength\columnsep{10mm}
\begin{multicols}{2}[
\section*{\centering\large\contentsname   
    \@mkboth{
       \MakeUppercase\contentsname}{\MakeUppercase\contentsname}}]
\@starttoc{toc}
\end{multicols}}
\makeatother  

\usepackage[normalem]{ulem} 
\ULdepth = 0.16em 
\usepackage{pdf14}
\usepackage[unicode,bookmarksopen=true]{hyperref}
\doublehyphendemerits=1000000
\finalhyphendemerits=10000
\clubpenalty=10000
\widowpenalty=10000


\begin{document}
\begin{titlepage}
\end{titlepage}
\clearpage

\renewcommand{\chaptername}{\textsection~}
\shorttoc{\centerline{\large{\bfseries{Краткое содержание}}}}{0}

\chapter{С чего начать\ldots} % this \chapter should be \chapter*
\lettrine[findent=3pt, nindent =0pt]{B}{э}том документе (my text)

\chapter{Первые блюда}
\noindent                    % minitoc two columns
\makebox[1.01\textwidth]{
{\begin{minipage}{\dimexpr\textwidth-7\mboxsep-3\mboxrule\relax}
\centering
\setlength\columnsep{10mm}
\begin{multicols}{2}
\startcontents[chapters]
\printcontents[chapters]{}{1}{}
\end{multicols}\\
\phantom{123}\\
\end{minipage}}
}

\lettrine[findent=3pt, nindent =0pt]{P}{а}ньше я (my text)
\phantom{\lipsum[1]}
\vspace{-7mm}
\section{1}
\subsection{1.1}
(my text)

\chapter{2} 
\noindent     % minitoc one column 
\makebox[1.01\textwidth]{
{\begin{minipage}{\dimexpr\textwidth-7\mboxsep-3\mboxrule\relax}
\centering
\startcontents[chapters]
\printcontents[chapters]{}{1}{}
\\
\phantom{123}\\
\end{minipage}}
}

\lettrine[findent=3pt, nindent =0pt]{O}{б} этой (my text)
\phantom{\lipsum[5]}
\vspace{-7mm}
\section1 \subsection1 \subsubsection1 (my text)
...
\chapter{10}
\clearpage  
\tableofcontents
\end{document}

The document compiles, but how to make the design \chapter, the \tableofcontents and \shorttoc as well as the chapterhead in \chapter?.. I am unfortunately only a user and not a developer.

Texmaker 5.02, TeXLive2017 (updated) Slackware 14.2.

0

Another option of decoration of the chapterhead:

\makeatletter

\def\@makechapterhead#1{
\vspace*{17\p@}
{\parindent \z@ \position \reset@font
    \mbox \textwidth{
    \centering {
    {\Large\bfseries\ \ \ \ornament\ \ 
\chaptername\,\!\thechapter\hfill#1\ \ \ornament\ \ \ \ \  \ \par\nobreak}
    } }
    \vspace{-47\p@}
    {\centering 
\includegraphics[width=190mm,height=25mm]{glawram7}  }
    \par\nobreak
    \vskip 17\p@ 
 }}

 \def\@makeschapterhead#1{
 \vspace*{17\p@}
 {\parindent \z@ \position \reset@font
    \mbox \textwidth{
    \centering {
    {\Large\bfseries\ \ \ \ornament\hfill#1\hfill\ornament\ \ \ \ \  \ \par\nobreak}
  } }
    \vspace{-47\p@}
    {\centering \includegraphics[width=190mm,height=25mm]{glawram7}  }
    \par\nobreak
    \vskip 17\p@ 
 }}

\makeatother 

Also replaced the star with a Celtic knot:

\DeclareRobustCommand{\redstar}{\includegraphics[width=5.5mm]{uzel38}}
\DeclareRobustCommand{\lquercus}{\pgfornament[height=0.7cm,color=green!45!black,ydelta=-8pt]{79}}
\DeclareRobustCommand{\rquercus}{\pgfornament[height=0.7cm,symmetry=v,color=green!45!black,ydelta=-8pt]{79}}
\renewcommand{\ornament}{\lquercus\redstar\rquercus}

My result: enter image description here

The decorative frame and Celtic knot are created in the Knotter program. https://knotter.mattbas.org/Knotter

Sorry for the extra answer: it may be useful to someone.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.