1

I would like to replicate for this code:

\documentclass[10pt]{beamer}
%\usepackage{etex}
\usepackage[utf8]{inputenc}
\usepackage[TS1,T1]{fontenc}
\usepackage{xspace}
\usepackage{amsmath,amssymb}
\usepackage[english]{babel}
\usepackage{tikz}
\usepackage{lmodern}
\usepackage{beamerhighlight}
\usetikzlibrary{decorations}
\usetikzlibrary{decorations.pathmorphing}
\usetikzlibrary{shapes.geometric}
\usetikzlibrary{calc}
\begin{document}
\begin{frame}{Equation}
{
\colorlet{mathnodecolor}{orange!60}
\tikzset{math color=orange}
\tikzset{append text node style={outer sep=2pt,text=structure,font=\bfseries\mathversion{bold}}}
\tikzset{append math node style={inner sep=1pt,outer sep=2pt,fill=none}}
\tikzset{append link style={>=latex,->,orange!80,line width=1.5pt}}
\uncover<+->{\begin{multline*}
H = \int_{-\infty}^L \frac{dx}{2\pi} \left[ 
\frac{v_F}{%
\commentmathwithtext<+->[position={(250:2cm)},
        append text node style={align=left,text width=13.2em},
            ]{K^2}{Luttinger parameter\\ ($K=1$ without interactions)}
} \left(\frac{\partial \phi}{\partial x} \right)^2 + v_F \left(\frac{\partial \theta}{\partial x} \right)^2 \right]
- 
\commentmathwithtext<+->[position={(40:2cm)}]{V}{Backscattering}
\cos(2 \phi(x=0)) \\
+ \frac{1}{\pi^2} E_C \left[ \phi(x=0) - \left( \frac{\pi C 
\commentmathwithtext<+->[position={(-60:2cm)}]{V_g}{Gate voltage}
}{\lvert e \rvert} + k_F L \right) \right]^2
\end{multline*}}
}
\end{frame}
\end{document}

To produce such a pdf file: Equation

by substituting the equation above by this one:

\begin{gather}\label{sys:1}
\begin{dcases}
 \dot{Q} & = - \gamma_Q Q - \eta_1 k_0 Q - \eta_2 k_0 Q   - (1- \eta_1 - 
 \eta_2) \beta(Q) Q +  \\
& +    2(1- \eta_1 - \eta_2) \mathrm{e}^{-\gamma_Q \tau } \beta(Q_{\tau}) 
Q_{\tau}  + \eta_1 k_0 \mathrm{e}^{-\gamma_Q \tau } Q_{\tau} - 
\tilde{r}_q(P) Q^{q+1}, \\
\dot{D} & = - \kappa D + K,    \\
\dot{P} & = - v P + \kappa D,
\end{dcases}
\end{gather}

with the following data:

  1. $Q$ est la densité de la population de la cellule souche.
  2. $\eta_1$ est la valeur en pourcentage de la division asymétrique avec la cellule fille indiscernable à la cellule mère.
  3. $(1-\eta_1 - \eta_2)$ a la propriété de s'auto-renouveler.
  4. $\tau$ est la durée du cycle cellulaire.

I would like to thank everyone who read this Post.

I sincerely thank for any comments or answers.

  • 2
    Where can one find the beamerhighlight package and where is \commentmathwithtext defined? – leandriis Jun 17 '18 at 16:33
7

After downloading beamerhighlight.sty from here I could make your MWE run through and the new equation can be done with the same commands (if one also loads mathtools. Personally I would neither use equation numbers in presentations nor the large brace, but I guess you'll have the last word.

\documentclass[10pt]{beamer}
\usepackage[utf8]{inputenc}
\usepackage[TS1,T1]{fontenc}
\usepackage{xspace}
\usepackage{amsmath,amssymb,mathtools}
\usepackage[english]{babel}
\usepackage{tikz}
\usepackage{lmodern}
\usepackage{beamerhighlight}
\usetikzlibrary{decorations}
\usetikzlibrary{decorations.pathmorphing}
\usetikzlibrary{shapes.geometric}
\usetikzlibrary{calc}
\begin{document}

\begin{frame}[t]
\frametitle{New equation}
\colorlet{mathnodecolor}{orange!60}
\tikzset{math color=orange}
\tikzset{append text node style={outer sep=0pt,text=structure,font=\bfseries\mathversion{bold}}}
\tikzset{append math node style={inner sep=0pt,outer sep=2pt,fill=none}}
\tikzset{append link style={>=latex,->,orange!80,line width=1.5pt}}
\begin{gather}\label{sys:1}
\begin{dcases}
 \dot{Q} & = - \gamma_Q Q
  - \eta_1 k_0  \commentmathwithtext<+->[position={(40:2cm)},
        append text node style={align=left,text width=13.2em},
            ]{Q}{la densit\'e de la population de la cellule souche}
 - \eta_2 k_0 Q   - (1- \eta_1 - 
 \eta_2) \beta(Q) Q +  \\
& +    2\commentmathwithtext<+->[position={(-100:4cm)},
        append text node style={align=left,text width=13.2em},
            ]{(1- \eta_1 - \eta_2)}{la propri\'et\'e de s'auto-renouveler}
     \mathrm{e}^{-\gamma_Q \commentmathwithtext<+->[position={(-70:3cm)},
        append text node style={align=left,text width=13.2em},
            ]{\scriptstyle \tau}{la densit\'e de la population de la cellule souche} } \beta(Q_{\tau}) 
Q_{\tau}  +  \commentmathwithtext<+->[position={(-40:2cm)},
        append text node style={align=left,text width=13.2em},
            ]{\eta_1}{la valeur en pourcentage de la division asym\'etrique avec
            la cellule fille indiscernable \'a la cellule m\'ere}
 k_0 \mathrm{e}^{-\gamma_Q \tau } Q_{\tau} - 
\tilde{r}_q(P) Q^{q+1}, \\
\dot{D} & = - \kappa D + K,    \\
\dot{P} & = - v P + \kappa D,
\end{dcases}
\end{gather}
\end{frame}
\end{document}

enter image description here

  • 2
    Better remove etex, it shouldn't be necessary in a a current tex system. – Ulrike Fischer Jun 17 '18 at 18:51

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.