2

Below is the code:

\documentclass[svgnames,border=5mm]{beamer}

\hypersetup{colorlinks}
\definecolor{bleudefrance}{rgb}{0.19, 0.55, 0.91}
\definecolor{aquamarine}{rgb}{0.5, 1.0, 0.83}
\definecolor{electricyellow}{rgb}{1.0, 1.0, 0.0}
\definecolor{robineggblue}{rgb}{0.0, 0.8, 0.8}
\definecolor{ballblue}{rgb}{0.13, 0.67, 0.8}

\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{lmodern}
\usepackage[french]{babel}
\usepackage[absolute,overlay]{textpos}
\usepackage{tikz}

\begin{document}

\begin{frame}{Vers une modélisation du milieu complexe}
\begin{columns}
\begin{column}{12cm}
\begin{tikzpicture}[scale=0.9]
\uncover<1->{
  \begin{scope}[blend group = soft light]
  \fill[gray!20!white]   (2.5,3) circle (30pt and 15pt);
    \fill[red!30!white]   ( 90:1.2) circle (2);
    \fill[green!30!white] (210:1.2) circle (2);
    \fill[cyan!30!white]  (330:1.2) circle (2);
    \fill[pink!30!white]   (90:-3.2) circle (2);
  \end{scope}
  \node at (2.5,3)    {Contexte};
  \node at ( 90:2)    {Pluridisciplinarité};
  \node at (-1.5,-0.97)   {Climat};
  \node at ( 330:2)   {\bfseries{\underline{Sol}}};
  \node at ( 90:-3.2)  { \Large Blablabla};
  \node [font=\Large] {Vous};
}
\uncover<2->{
\begin{scope}[xshift=7cm]
  \begin{scope}[blend group = soft light]
  \fill[gray!30!white]   (2.5,3) circle (30pt and 15pt);
    \fill[robineggblue!40!white]   ( 90:1.2) circle (2);
    \fill[bleudefrance!40!white] (210:1.2) circle (2);
    \fill[aquamarine!40!white]  (330:1.2) circle (2);
    \fill[ballblue!40!white]  (90:-3.2) circle (2);
  \end{scope}
  \node at (2.5,3)    {Objectif};
  \node at ( 90:2)    {Caractérisation};
  \node at (-2,-0.98)   {Imagerie};
  \node at (1.5,-0.98)   {Micromécanique};
  \node at ( 90:-3.2)  {Modélisation};
  \node at ( 0,-3.6)  {numérique};
  \node at (0,0) [font=\huge,
      color = black,
      align = center
   ]{
      \bfseries{Sol}
   };
\end{scope}
}

\end{tikzpicture}
\end{column}
\end{columns}
\hspace{1cm}
\end{frame}

\end{document}

which produces two slides

enter image description here

enter image description here

I want to draw an arrow from the nod of the "Sol" in the left Venn diagram pointing towards the word "Sol" to the right one.

enter image description here

The arrows should be as the arrows of this thread

tiki fancy arrow in tikz environment

Thanks in advance.

4

Just give the nodes some names, and draw an arrow between them.

\documentclass[svgnames,border=5mm]{beamer}

\hypersetup{colorlinks}
\definecolor{bleudefrance}{rgb}{0.19, 0.55, 0.91}
\definecolor{aquamarine}{rgb}{0.5, 1.0, 0.83}
\definecolor{electricyellow}{rgb}{1.0, 1.0, 0.0}
\definecolor{robineggblue}{rgb}{0.0, 0.8, 0.8}
\definecolor{ballblue}{rgb}{0.13, 0.67, 0.8}

\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{lmodern}
\usepackage[french]{babel}
\usepackage[absolute,overlay]{textpos}
\usepackage{tikz}

\usetikzlibrary{
  fadings,
  shapes.arrows,
  shadows,
  positioning
}   

\tikzfading[name=arrowfading, top color=transparent!0, bottom color=transparent!95]

\tikzset{
  arrowfill/.style={
     top color=OrangeRed!20,
     bottom color=Red,
     general shadow={fill=black, shadow yshift=-0.8ex, path fading=arrowfading}
  },
  arrowstyle/.style={
     draw=FireBrick,
     arrowfill,
     single arrow,
     minimum height=#1,
     single arrow head extend=.2cm
   }
}

\begin{document}

\begin{frame}{Vers une modélisation du milieu complexe}
\begin{columns}
\begin{column}{12cm}
\begin{tikzpicture}[scale=0.9]
\uncover<1->{
  \begin{scope}[blend group = soft light]
  \fill[gray!20!white]   (2.5,3) circle (30pt and 15pt);
    \fill[red!30!white]   ( 90:1.2) circle (2);
    \fill[green!30!white] (210:1.2) circle (2);
    \fill[cyan!30!white]  (330:1.2) circle (2);
    \fill[pink!30!white]   (90:-3.2) circle (2);
  \end{scope}
  \node at (2.5,3)    {Contexte};
  \node at ( 90:2)    {Pluridisciplinarité};
  \node at (-1.5,-0.97)   {Climat};
  \node at ( 330:2) (SOL1)   {\bfseries{\underline{Sol}}};
  \node at ( 90:-3.2)  { \Large Blablabla};
  \node [font=\Large] {Vous};
}
\uncover<2->{
\begin{scope}[xshift=7cm]
  \begin{scope}[blend group = soft light]
  \fill[gray!30!white]   (2.5,3) circle (30pt and 15pt);
    \fill[robineggblue!40!white]   ( 90:1.2) circle (2);
    \fill[bleudefrance!40!white] (210:1.2) circle (2);
    \fill[aquamarine!40!white]  (330:1.2) circle (2);
    \fill[ballblue!40!white]  (90:-3.2) circle (2);
  \end{scope}
  \node at (2.5,3)    {Objectif};
  \node at ( 90:2)    {Caractérisation};
  \node at (-2,-0.98)   {Imagerie};
  \node at (1.5,-0.98)   {Micromécanique};
  \node at ( 90:-3.2)  {Modélisation};
  \node at ( 0,-3.6)  {numérique};
  \node at (0,0) [font=\huge,
      color = black,
      align = center
   ] (SOL2) {
      \bfseries{Sol}
   };
\end{scope}
%\draw (SOL1)--(SOL2);
\node [arrowstyle=3.5cm,
        right=0 of SOL1.east,
        rotate=12,
        fading angle=12 % only  affects shadow
       ] {};
}

\end{tikzpicture}
\end{column}
\end{columns}
\hspace{1cm}
\end{frame}

\end{document}

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.