my node/jct does not move horizontally/vertically though I am changing x/y--what is the problem
\documentclass[10pt,a4paper]{article}
\usepackage{printlen}
\usepackage{layouts}
\usepackage{titlesec}
\usepackage{multirow, makecell, tabularx, booktabs}
\usepackage{babel}
\usepackage{setspace}
\usepackage{framed}
\usepackage{tgschola}%------------font YES
\usepackage[
height=8.5in, % height of the text block
width=6.5in, % width of the text block
top=78pt, % distance of the text block from the top of the page
headheight=60pt, % height for the header block
headsep=12pt, % distance from the header block to the text block
heightrounded, % ensure an integer number of lines
%showframe, % show the main blocks
verbose, % show the values of the parameters in the log file
]{geometry}
\usepackage{enumitem}
\usepackage[table]{xcolor} %for color of table
\usepackage{booktabs} %for toprule midrule bottomrule in tables
\usepackage{multirow} % Required for multirows
\usepackage{longtable}
\usepackage{rotating}
\usepackage{lscape}
\usepackage[utf8]{inputenc}
\usepackage{fancyhdr}
\usepackage[none]{hyphenat} %no hyphenation
\usepackage{graphicx}
\usepackage{float}
\usepackage{lastpage} %toget last page number
\usepackage{indentfirst}
\usepackage{smartdiagram}
\usepackage{tikz,xcolor}
\usetikzlibrary{shapes, arrows, matrix, calc}
\usetikzlibrary{decorations.markings}
\usetikzlibrary{arrows.meta,quotes,positioning}
\usetikzlibrary{arrows,calc,positioning}
\usetikzlibrary{positioning}
\usetikzlibrary{matrix,fit,calc}
\usepackage{verbatim}
\begin{document}
\begin{landscape}
\begin{tikzpicture}[node distance=2cm]
\tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=2.5cm, draw=black, fill=blue!20]
\tikzstyle{arrow} = [thick, ->, >=stealth]
\node (cont)[process]{CONTROLLER};
\node (sqach)[process, below of =cont, xshift=-6cm]{SQAO, Chennai};
\node (sqame)[process, below of =pro1, xshift=6cm]{SQAO, Medak};
\node (vigo)[process, below of =sqach]{Vigilance Offr};
\node (cyso)[process, below of =vigo]{Cyber Security Offr};
\node (rtio)[process, below of =cyso]{RTI Offr};
\node (grio)[process, below of =sqame]{Grievance Offr};
\node (sect)[process, below of =grio]{Secretariat};
\node (hino)[process, below of =sect]{Hindi Offr};
\node (jct)[process, below of =cont, x=6cm]{Jt Controller\\T Wing};
\end{tikzpicture}
\end{landscape}
\end{document}
after using transform command
finally
and the code
\begin{landscape}
% \begin{figure}[H]
% \begin{tikzpicture}[node distance=2cm]
\begin{tikzpicture}[node distance=2cm, transform canvas={scale=0.6}, xshift=600]
\tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=2.5cm, draw=black, fill=blue!20]
\tikzstyle{arrow} = [thick, ->, >=stealth]
\node (cont)[process]{CONTROLLER};
%------------
\node (sqach)[process, below of =cont, xshift=-21cm]{SQAO, Chennai};
\node (sqame)[process, below of =sqach]{SQAO, Medak};
%--------------------------
\node (vigo)[process, below of =cont, xshift=-17cm, yshift=0cm]{Vigilance Offr};
\node (cyso)[process, below of =vigo]{Cyber Security Offr};
\node (rtio)[process, below of =cyso]{RTI Offr};
\node (grio)[process, below of =rtio]{Grievance Offr};
\node (sect)[process, below of =grio]{Secretariat};
\node (hino)[process, below of =sect]{Hindi Offr};
%----------------------------------------
\node (jct)[process, below of =cont, xshift=1cm]{Jt Controller\\T Wing};
\node (jcm)[process, right of =jct, xshift=6cm, yshift=0cm]{Jt Controller \\M Wing};
\node (jco)[process, left of =jct, xshift=-6cm, yshift=0cm]{Jt Controller \\O Wing};
\node (jcsa)[process, left of =jct, xshift=-12cm, yshift=0cm]{Jt Controller \\SA Wing};
%--------------------------------------------
\node (dcsa)[process, below of =jcsa, xshift=1.7cm]{Dy Controller};
\node (rdcsa)[process, below of =dcsa, xshift=1.7cm]{QMS\\URC};
%--------------------------
\node (dco)[process, below of =jco, xshift=1.7cm]{Dy Controller};
\node (so)[process, below of =dco, xshift=1.7cm]{Store Offr};
\node (ao)[process, below of =so, yshift=-4cm]{Adm offr};
\node (os1)[process, below of =ao, xshift=1.7cm]{OS Est};
\node (os2)[process, below of =os1, xshift=0cm]{OS Fin};
\node (acpc)[process, below of =ao, yshift=-4cm]{AC P\&C};
\node (pc)[process, below of =acpc, xshift=1.7cm]{P\&C};
\node (adm)[process, below of =acpc, yshift=-2cm]{Adm\\(Service pers)};
%-------------------------------------------------------------------
\node (store)[process, below of =so, xshift=1.7cm]{Stores};
\node (mt)[process, below of =store, xshift=0cm]{MT};
%--------------------------------------------------------
\draw (cont)--(-23,0)|-(sqach);
\draw (cont)--(-23,0)|-(sqame);
%-------------------
\draw (cont)--(-19,0)|-(vigo);
\draw (cont)--(-19,0)|-(rtio);
\draw (cont)--(-19,0)|-(cyso);
\draw (cont)--(-19,0)|-(grio);
\draw (cont)--(-19,0)|-(sect);
\draw (cont)--(-19,0)|-(hino);
%-------------------
\draw (cont)--(-15,0)|-(jcsa);
\draw (jcsa)|-(dcsa);
\draw (dcsa)|-(rdcsa);
%-------------------------------------
\draw (cont)--(-9,0)|-(jco);
\draw (jco)|-(dco);
\draw (dco)|-(so);
\draw (so)|-(store);
\draw (so)|-(mt);
\draw (dco)|-(ao);
\draw (ao)|-(os1);
\draw (ao)|-(os2);
\draw (dco)|-(acpc);
\draw (acpc)|-(pc);
\draw (dco)|-(adm);
\end{landscape}
I have completed the org chart as below
the code
\documentclass[10pt,a4paper]{article}
\usepackage{printlen}
\usepackage{titlesec}
\usepackage{multirow, makecell, tabularx, booktabs}
\usepackage{babel}
\usepackage{setspace}
\usepackage{framed}
\usepackage{fancybox}
\usepackage[short, nodayofweek, level, 12hr]{datetime}
\usepackage{paralist}
\usepackage{xcolor}
\usepackage{xcoffins}
\usepackage{tocloft}
\usepackage{tgschola}%------------font YES
\usepackage{enumitem}
\usepackage{booktabs} %for toprule midrule bottomrule in tables
\usepackage{multirow} % Required for multirows
\usepackage{longtable}
\usepackage{rotating}
\usepackage{lscape}
\usepackage[utf8]{inputenc}
\usepackage{fancyhdr}
\usepackage[none]{hyphenat} %no hyphenation
\usepackage{graphicx}
\usepackage{float}
\usepackage{lastpage} %toget last page number
\usepackage{indentfirst}
\usepackage{smartdiagram}
\usepackage{wrapfig}
%header and footer
\pagestyle{fancy}
\fancyhead{}
\fancyfoot{}
\usepackage{fourier-orns}
\renewcommand\headrule{%------------fancy top line of page
\vspace{-6pt}
\hrulefill
\raisebox{-2.1pt}
{\quad\decofourleft\decotwo\decofourright\quad}%
\hrulefill}
\renewcommand\footrule{%------------fancy bottom line of page
\vspace{-6pt}
\hrulefill
\raisebox{-2.1pt}
{\quad\decofourleft\decotwo\decofourright\quad}%
\hrulefill}
%-----------------------------------------
\begin{document}
\begin{landscape}
\begin{tikzpicture}[node distance=2cm, transform canvas={scale=0.6}, xshift=420]
\tikzstyle{process} = [rectangle, minimum width=3cm, minimum height=1cm, text centered, text width=2.5cm, draw=black, fill=blue!20]
\tikzstyle{arrow} = [thick, ->, >=stealth]
\node (cont)[process]{CONTROLLER};
%------------
\node (sqach)[process, below of =cont, xshift=-14cm]{SQAO, Chennai};
\node (sqame)[process, below of =sqach]{SQAO, Medak};
%--------------------------
\node (vigo)[process, below of =cont, xshift=-10cm, yshift=-9cm]{Vigilance Offr};
\node (cyso)[process, below of =vigo]{Cyber Security Offr};
\node (rtio)[process, below of =cyso]{RTI Offr};
\node (grio)[process, below of =rtio]{Grievance Offr};
\node (sect)[process, below of =grio]{Secretariat};
\node (hino)[process, below of =sect]{Hindi Offr};
%----------------------------------------
\node (jct)[process, below of =cont, xshift=6cm]{Jt Controller\\T Wing};
\node (jcm)[process, below of =cont, xshift=14cm, yshift=0cm]{Jt Controller \\M Wing};
\node (jco)[process, below of =cont, xshift=-2cm, yshift=0cm]{Jt Controller \\O Wing};
\node (jcsa)[process, below of =cont, xshift=-8cm, yshift=0cm]{Jt Controller \\SA Wing};
%--------------------------------------------
\node (dcsa)[process, below of =jcsa, xshift=1.7cm]{Dy Controller};
\node (rdcsa)[process, below of =dcsa, xshift=1.7cm]{QMS\\URC};
%--------------------------
\node (dco)[process, below of =jco, xshift=1.7cm]{Dy Controller};
\node (so)[process, below of =dco, xshift=1.7cm]{Store Offr};
\node (ao)[process, below of =so, yshift=-4cm]{Adm offr};
\node (os1)[process, below of =ao, xshift=1.7cm]{OS Est};
\node (os2)[process, below of =os1, xshift=0cm]{OS Fin};
\node (acpc)[process, below of =ao, yshift=-4cm]{AC P\&C};
\node (pc)[process, below of =acpc, xshift=1.7cm]{P\&C};
\node (adm)[process, below of =acpc, yshift=-2cm]{Adm\\(Service pers)};
%-------------------------------------------------------------------
\node (store)[process, below of =so, xshift=1.7cm]{Stores};
\node (mt)[process, below of =store, xshift=0cm]{MT};
%--------------------------------------------------------
\node (dcqa1)[process, below of =jct, xshift=1.7cm]{DCQA\\T-72};
\node (acqa1)[process, below of =dcqa1, xshift=1.7cm]{ACQA\\T-72};
\node (racqa1)[process, below of =acqa1, xshift=1.7cm]{AHSP\\T-72};
\node (racqa2)[process, below of =racqa1, xshift=0cm]{OH\\T-72\\BLT};
%-------------------------------------------------------------------
\node (dcqa2)[process, below of =dcqa1, xshift=0cm, yshift=-6cm]{DCQA\\T-90};
\node (acqa2)[process, below of =dcqa2, xshift=1.7cm]{ACQA\\QMS};
\node (racqa3)[process, below of =acqa2, xshift=1.7cm]{QMS\\(Quality\\Audit)};
\node (acqa3)[process, below of =acqa2, xshift=0cm, yshift=-2cm]{ACQA\\T-90};
\node (racqa4)[process, below of =acqa3, xshift=1.7cm, yshift=-0cm]{AHSP\\T-90};
\node (racqa5)[process, below of =racqa4, xshift=0cm, yshift=0cm]{GA\\TRAWL\\(T-72)\\Simulators};
%-------------------------------------------------------------------------------
\node (dcqam1)[process, below of =jcm, xshift=1.7cm]{DCQA\\AHSP\\QA/OH};
\node (acqam1)[process, below of =dcqam1, xshift=1.7cm]{ACQA\\AHSP\\QA/OH};
\node (racqam1)[process, below of =acqam1, xshift=1.7cm]{MBT\\T-55};
\node (racqam2)[process, below of =racqam1, xshift=0cm]{MBT\\QA/ OH};
\node (racqam3)[process, below of =racqam2, xshift=0cm]{BMP};
\node (dcqam2)[process, below of =dcqam1, xshift=0cm, yshift=-8cm]{DCQA\\Doc\\Tracked vehicles};
\node (acqam2)[process, below of =dcqam2, xshift=1.7cm]{ACQA\\Doc\\Tracked vehicles};
\node (racqam4)[process, below of =acqam2, xshift=1.7cm]{COD};
\node (racqam5)[process, below of =racqam4, xshift=0cm]{DRG};
\node (racqam6)[process, below of =racqam5, xshift=0cm]{R\&R};
%-------------------------------------------------------------------------------------
\draw (cont)--(-16,0)|-(sqach);
\draw (cont)--(-16,0)|-(sqame);
%-------------------
\draw (cont)--(-12,0)|-(vigo);
\draw (cont)--(-12,0)|-(rtio);
\draw (cont)--(-12,0)|-(cyso);
\draw (cont)--(-12,0)|-(grio);
\draw (cont)--(-12,0)|-(sect);
\draw (cont)--(-12,0)|-(hino);
%-------------------
\draw (cont)--(-11,0)|-(jcsa);
\draw (jcsa)|-(dcsa);
\draw (dcsa)|-(rdcsa);
%-------------------------------------
\draw (cont)--(-5,0)|-(jco);
\draw (jco)|-(dco);
\draw (dco)|-(so);
\draw (so)|-(store);
\draw (so)|-(mt);
\draw (dco)|-(ao);
\draw (ao)|-(os1);
\draw (ao)|-(os2);
\draw (dco)|-(acpc);
\draw (acpc)|-(pc);
\draw (dco)|-(adm);
%---------------------------------------
\draw (cont)-|(jct);
\draw (jct)|-(dcqa1);
\draw (dcqa1)|-(acqa1);
\draw (acqa1)|-(racqa1);
\draw (acqa1)|-(racqa2);
\draw (jct)|-(dcqa2);
\draw (dcqa2)|-(acqa2);
\draw (acqa2)|-(racqa3);
\draw (dcqa2)|-(acqa3);
\draw (acqa3)|-(racqa4);
\draw (acqa3)|-(racqa5);
%----------------------------------------
\draw (cont)--(19,0)|-(jcm);
\draw (jcm)|-(dcqam1);
\draw (jcm)|-(dcqam2);
\draw (dcqam1)|-(acqam1);
\draw (dcqam2)|-(acqam2);
\draw (acqam1)|-(racqam1);
\draw (acqam1)|-(racqam2);
\draw (acqam1)|-(racqam3);
\draw (acqam2)|-(racqam4);
\draw (acqam2)|-(racqam5);
\draw (acqam2)|-(racqam6);
\end{tikzpicture}
\end{landscape}
\cleardoublepage
\end{document}
the balance is to get the line coming out of the CONTROLLER node from the bottom and not from the left or right side
also if any other improvements can be suggested
xshift
as you were doing for other nodes. – nidhin Oct 27 '19 at 15:13\node (jct)[process, below = 6 cm of cont,]{Jt Controller\\T Wing}
. Apart from that, please make your example code compilable. Currently, there will be an error message about a missing nodepro1
. – leandriis Oct 27 '19 at 15:16tikz
libraries. It is sufficient to load each only once. – Zarko Oct 27 '19 at 15:52