Questions tagged [abstract]
{abstract} is about customizing or creating abstract environments.
1
vote
0answers
14 views
Space over the abstract title
I am using the following code to generate a single page with the abstract:
\documentclass[a4paper, pagesize, twoside, openright, 11pt, BCOR=4mm, DIV=11, chapterprefix, appendixprefix, headlines=1.1, ...
0
votes
1answer
23 views
Align abstract horizontally to the left
I redefined an abstract environment in order to center it in the page. I want to keep that but aling the text to the left instead of to the center but I'm not managing to do it. Any suggestions?
Here'...
0
votes
0answers
17 views
Combine documentclass is not showing the authors of the second document
I am preparing an abstract volume for the upcoming conference at my institute. While joining the different files using combine documentclass, I stumbled upon a problem. The resultant pdf is not ...
0
votes
0answers
23 views
How to prepare an abstract volume for a conference
I am preparing an abstract volume for an upcoming seminar at my institution. It should look something like this:
I need multiple entries to appear on the same page. Also I need multiple author list ...
0
votes
0answers
21 views
Add one more abstract in document class amsbook
I am trying to add one more abstract in document class amsbook. To this end, I find a good and simple solution here. However it doesn't fit my situation because the abstracts in my book is a bit too ...
0
votes
1answer
33 views
elsarticle + Lineno: numbering abstract's lines
I'm using elsarticle class for preparing a manuscript for an Elsevier journal.
However, after I've compiled my document with pdfTeX 3.1415926-2.5-1.40.14 (TeX Live 2013/Debian), the text written in ...
0
votes
1answer
43 views
! Undefined control sequence. \u8:´ ->\IeC {\textasciiacute }
I just get this error between my abstract and introduction.
! Undefined control sequence.
\u8:´ ->\IeC {\textasciiacute
}
l.96 \keywords
{asteroid --
...
0
votes
2answers
45 views
Add “This version” and “First version” in abstract
I am trying to add on separate lines "This version" and "First version". I have tried the following code, but it does not seem to work:
\renewcommand*{\today}{\normalsize{This draft: December 2018}}
...
1
vote
1answer
34 views
Hide page number on a certain page of a report, but have it counted
In a report document class, I would like to hide the numbering on a certain page in the front matter, but still have that page counted in the document wide page numbering scheme.
Specifically, my ...
1
vote
0answers
72 views
How to make a single column abstract into two columns
I am using APA6 template provided by sharelatex. However, the template outputs a single column abstract in a two column document (as shown here: https://www.sharelatex.com/templates/journals/apa).
I ...
2
votes
1answer
22 views
Abstract right next to the table of contents in documentclass book
I am writing my thesis in Latex, using texmaker but i have too many white pages that i want to get rid of but don't know how. Maybe someone here has an idea:) Here is a MWE:
\documentclass[12pt]{book}...
0
votes
1answer
23 views
Making a footnote in Abstract of a paper under the document class “amsart”?
The search attempts seemed to only show how to make a footnote work as usual in Abstract if the document class is a usual one. However, for the class amsart it seems that none of the methods works.
\...
1
vote
1answer
95 views
How to insert a Note to Practitioners section in IEEE transactions latex files
We use the famous class file called IEEETran.cls
Following is my attempt at creating an abstract followed by another section called Note to Practitioners which must have exactly the same style as the ...
1
vote
1answer
108 views
How do I put two abstracts in different languages in the acmart latex template?
Recently I've started to use the acmart template to write a paper for a conference, but I need to write the abstract in two languages and apparently the template don't allow to write two abstracts, ...
0
votes
2answers
50 views
Abstract environment changing the numbering of pages
I'm writing my thesis using the book document class.
To include the acknowledgments environment, I added some lines to my code.
The problem now is that using this acknowledgments environment resets ...
0
votes
1answer
181 views
AASTEX: one-column abstract in two-columns article
I am using aastex class with twocolumn option for an article.
\documentclass[twocolumn,linenumbers]{aastex61}
I want my first section to start right after the abstract which is in a single-column ...
1
vote
1answer
34 views
Unwanted space after \abstractname followed by dot
I want to redefine my abstract environment in the article class so that it starts with boldfaced Abstract followed by a dot and then the text. However, whenever I put the dot after \abstractname, it ...
0
votes
1answer
35 views
Change the name of document elements like 'Figure' or 'Abstract' twice
This is a bit of a continued question looking at here
I am using the memoir package which implemented the abstact package directly. As I use polygesia instead of babel, to rename the predefined name ...
-1
votes
0answers
49 views
How to modify a preset abstract
I apologize in advance but I have an urgency. I use a pre-set .cls file for my degree thesis. I would like to change the layout of the abstract, which is inside the .cls file:
\DeclareDocumentCommand{...
0
votes
1answer
37 views
Getting rid of the horizontal line between abstract and the text of an article
I am using an article using informs3.cls. I want to get rid of the line between abstract and the text, because abstract is taking the entire first page, and the line sits at the top of the second page....
0
votes
1answer
39 views
How can I vertically center a predefined abstract environment to the middle of text body?
I got a low level TeX code from Define abstract environment in book that defines an environment for Abstract. However, when I put it in my work, I use notitlepage option which results in the abstract ...
2
votes
3answers
157 views
Copy abstract environment and rename its title
I'd like to rename the title of the abstract environment but without losing the original environment. I am thinking of copying the environment to a new environment called abstract2 and rename the ...
1
vote
1answer
21 views
Abstract page setup
\documentclass[a4paper,12pt]{article}
%twoside yaz iki taraflı için
\usepackage[top=2.5 cm, bottom=2.5 cm, left=4 cm, right=2.5 cm]{geometry}
\usepackage[turkish,shorthands=:!]{babel}
\usepackage{...
1
vote
1answer
82 views
Add Arabic Abstract at the end of a document
I am using this template for my master's thesis; however, I can not add the Arabic language to the output.
Is there any way to add an Arabic abstract at the end of the document?
P.S: I am using ...
2
votes
1answer
255 views
Unwanted blank page inserted after abstract
I'm creating a thesis document using the report style and I'm running into an issue where latex wants to insert an extra blank page after my abstract. I would like the abstract to be a single page and ...
0
votes
1answer
89 views
Remove Section Numbering for Abstract in APA6
I am writing a paper in an APA6 class document. I would like to number the sections which I did with \setcounter{3}.
However, I would not like to have my abstract numbered but could of course not use ...
3
votes
1answer
95 views
Lines above and below the abstract
I need one line above the abstract and other line below the abstract. The width of lines should be equal to the width of abstract. The lines should not be larger than the width of the abstract and the ...
0
votes
0answers
32 views
How to adopt the ieeeannot.bst to show the bib entry ordering chronologically?
I was trying to adapt the IEEEannot.bst to show the abstract from the entry in the references section. Now the entries in the references are not sorted chronologically. References are ordered ...
1
vote
1answer
194 views
Abstract not being inserted into the Table of Contents
I have been trying for a while now but each time, the same error messages show up.
! LaTeX Error: Something's wrong--perhaps a missing \item.
What I'm trying to achieve is to merely insert the ...
0
votes
1answer
71 views
Two abstracts on the same page [duplicate]
So I want to make two different abstracts in different languages on one page but I don't know how to accomplish that. I already tried the option which already is written on this website but it didn't ...
2
votes
3answers
221 views
Abstract on the title page in LaTeX
I would like the abstract on the title page in the following style:
1. The word 'Abstract' centred above the text
2. A horizontal line immediately underneath the word 'Abstract', with a width equal to ...
0
votes
0answers
91 views
IETE Paper LaTeX template
I have downloaded a .tex file which is a template for IETE research paper. But there is some problem in title and abstract section, which I am not able to rectify. Can anybody please help me to solve ...
1
vote
0answers
38 views
How to add an extra page to abstract in Cambridge University thesis template? [closed]
I want to add an extra page to abstract in Cambridge University thesis template.
0
votes
0answers
298 views
Abstract for thesis
Below is the preamble I used. After reading several pages I added abstract but it can't produce abstract my .pdf file.
\immediate\write18{makeindex \jobname.nlo -s nomencl.ist -o \jobname.nls}
\...
3
votes
1answer
76 views
Abstract colored background with frame lines
Is there a way to get the colored box around the abstract more even and with blue lines at the top and bottom edges?
Like here in this journal:
I am using default TeXStudio, this is my code so far:
...
0
votes
1answer
29 views
Headers not showing up on first page when using onecolabstract
\documentclass [10pt, a4paper, twocolumn] {article}
\usepackage {abstract}
\usepackage {fancyhdr}
\pagestyle {fancy}
\lhead {Left}
\renewcommand {\abstractname}{}
\renewcommand {\absnamepos} {empty}...
0
votes
1answer
18 views
start numbering of abstract as page ii rather than page i
I'm trying to change the starting count (page number) beginning with the abstract to "ii" instead of "i". With the code below, the page number for the abstract is "i" at the bottom of the page. I ...
0
votes
0answers
48 views
Abstract page design and a number of other issues [duplicate]
I would like to adapt my current 'Abstract page design' (code) to the style used in the picture. Furthermore, I would like to have the abstract on the title page, what I have learned thus far is that ...
0
votes
2answers
96 views
Wrong abstract header in memoir
The header of the abstract of my thesis is the header of the previous section, Abbreviations, it should be "Abstract" instead of "Abbreviations", but I don't know how to fix it. Here is the latex code ...
1
vote
0answers
141 views
Start text on same page as title with one-column abstract
I would like to have my document text start on the same page as my title and abstract, but have the text be in two columns while the abstract spans both columns above the text. I've gotten the text ...
0
votes
1answer
34 views
How to add a table after abstract in LaTex
I am using
\documentclass[a4paper,11pt,number]{elsarticle}
I need to add a table after the abstract in the document.
I am trying the below syntax, but the table is placed in the first page.
\...
0
votes
2answers
201 views
Changing the abstract title to 抽象
I want to change the title of my first abstract to "抽象"
I have tried
\documentclass[12pt,a4paper]{report}
\begin{CJK*}{UTF8}{gbsn}
\begin{abstract}
\addto{\captionschinese}{\...
1
vote
2answers
120 views
Using \twocolumn[] in newenvironment
I'm a little new using the \newenvironment command, and i'm having a little problem here.
I'm using the abstract-package to get a one-column abstract in a two-column article, which includes the \...
2
votes
1answer
92 views
The “Abstract” appears twice in the bookmark
I write my thesis in English in German. So I should write one Germany abstract and then one English version. But when I add a them in the bookmark, the "Abstract" appears twice, also the "...
2
votes
2answers
487 views
Title and abstract together on the first page of a report
I've just read this:
Abstract and title together on the first page of an article
Can I achieve the same for a report? If I use the same code in a report-class document, I still get a page break ...
0
votes
1answer
223 views
Abstract Structure - Can't Really change it [closed]
I'm using the structure of Latex as taken from this site
The problem is that the Abstract format is like this
\abstract
% context heading (optional)
% {} leave it empty if necessary
{
To ...
1
vote
1answer
662 views
latex report class \frontmatter \mainmatter and page numbering
I am using the report class. I want my abstract, acknowledgements and table of contents to be in the table of contents and its page number to be roman numerals. Then I want the rest after that to be ...
1
vote
0answers
64 views
Adding pages between title and abstract
I want to add set of pages between the title and the abstract
\documentclass[preprint,12pt]{elsarticle}
\begin{document}
\begin{frontmatter}
\title{Title}
\author[add1]{ME}
\ead{m@test.com}
\begin{...
1
vote
1answer
81 views
Change location of abstract in .sty file
I am making a cover sheet for my university, which requires the very first page to contain some information and then from the second page, the document should follow the standard documentclass ...
0
votes
1answer
492 views
Abstract and TOC-start on odd page
I'm having a twosided document (compiled with pdflatex, pdfTeX 3.14159265-2.6-1.40.16).
How can I make the abstract and TOC begin on odd pages? I don't know if this is even default, but for me it ...
