Questions tagged [acmart]

Questions related to acmart class, the official class of the Association for Computing Machinery

Filter by
Sorted by
Tagged with
0
votes
1answer
26 views

Latex ACM template add packages and newcommand

I am using an ACM template, and the minimum document is put below: \documentclass[sigconf]{acmart} \begin{document} \begin{algorithm}[H] \begin{algorithmic}[1] \Input{} \Output{} \Function{}{} ...
0
votes
1answer
28 views

Latex \plus \times undefined in ACM template

I am using an ACM template, and then I get the error Undefined control sequence for \documentclass[sigconf]{acmart} \begin{document} $(N[X],\plus,\times,0,1)$ \end{document} I think it's caused by \...
1
vote
1answer
31 views

Error: Font t1-zi4r-4 at 480 not found (TeXLive)

I am trying to use acmart.cls to write a journal article. I am using the verbatim environment to include code snippets in the article. I understand that the ACM class uses the Inconsolata font as ...
0
votes
0answers
10 views

apxproof and acmart cause constant “Label(s) may have changed”

I'm running into a problem where, if I use the apxproof package with the acmart document class, it always produces the LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ...
0
votes
0answers
28 views

Activating Figure and Table Description in acmart package

The acmart LaTeX template from https://www.acm.org/publications/taps/word-template-workflow does not seem to show the content of the \Description command. As a reproduction-example, consider the ...
0
votes
0answers
31 views

ACMart Hide identifying figure for double-blind review

I am writing an ACM SIG paper using the acmart class. For double-blind review we are required to remove any identifying information in our initial submission. This can be done automatically for ...
3
votes
2answers
99 views

acmart: figure not showing

I'm using \documentclass[acmtog]{acmart}. I have a few figures one after another. One of them is not showing. The figure numbering is like it's still there, and there's a blank page where the figure ...
4
votes
1answer
75 views

Overfull hbox in author list in acmart + texlive 2020

There is a peculiar overfull hbox that seems to arise from the authornotemark in the following MWE: \documentclass[sigconf,nonacm]{acmart} \title{Test} \author{A} \authornotemark \affiliation{\...
1
vote
0answers
65 views

Adding Orcid badge to a paper

I want to add the ORCID badge for the author of an article. I've copied the code exactly from this source: https://gugushvili.github.io/blog/2019/08/09/orcid \documentclass{acmart} \usepackage{lipsum} ...
0
votes
0answers
67 views

How to balance references in new acmart.cls format?

Hi I'm trying to balance the last page of my paper. It contains only references formatted with the new acmart.cls formt, and takes up about 1/4 of the left column. I've already tried a few methods: \...
1
vote
1answer
328 views

How to change spacing in the ACM conference template?

I am using ACM conference template. I cannot add spacing between the first author's e-mail and the second author's. I have this code: \documentclass[sigconf]{acmart} \usepackage[portuguese]{babel} \...
0
votes
0answers
92 views

How to increase line spacing in new acmart LaTeX template?

I'm writing a paper in ACM's new LaTeX template, which uses acmart.cls. How can I increase the line spacing? I tried the conventional methods, but they don't work anymore on the new templates. \...
1
vote
0answers
134 views

In acmart style, how to have one of the reference in the form Last Name, Initial of First Name Fashion

I have been asked to modify one of the reference in my paper to the following fashion: LastName1, Initial of First Name1, LastName2, Initial of First Name2, ..., year. Title, Journal. I am using \...
0
votes
0answers
25 views

ACM SIGCONF template causing footnote problems in 2-column format

I do not have a minimum workable example that I can put here, because this involves an unpublished paper. However, I can try to create an example if nobody has seen this before. I have a paper in ...
0
votes
1answer
68 views

Undefined control sequence for citestyle acmnumeric when uploading to arXiv

I'm using the acmart class with the following options: sigconf, nonacm=true, natbib=false For uploading the document to arXiv, I prepare and bundle all files using arxiv-collector, which usually does ...
0
votes
0answers
40 views

Why wouldn't Latex balance my columns on *all pages* (acmart document class)

We wrote a document using the acmart document class (double column). On most pages, the two columns are balanced. However, in some places there are 2-5 lines difference between the two columns of a ...
0
votes
0answers
34 views

Why can't lualatex in MiKTeX find stmaryrd fonts unless pdflatex is run first? [duplicate]

MNWE: \documentclass{acmart} \usepackage{stmaryrd} \begin{document} $\Mapsto$ \end{document} Running lualatex on this file gives a log containing luaotfload | cache : Lookup cache loaded from C:/...
0
votes
1answer
133 views

Can't find `acmart` package in basicTeX

I am getting an error claiming latex can't find the package acmart and it is not available in tlmgr.
0
votes
0answers
161 views

Package acmart cannot be imported. acmart.sty not found

I am a beginner in LaTeX and excuse me if my question is basic. I have downloaded the template of ACM Siggconf. The template is using \documentclass[sigconf]{acmart}. I have seen the text below on ...
0
votes
0answers
297 views

!Undefined control sequence.\Description

I am using texmaker and I git this error: !Undefined control sequence.\Description The error is form the description in images I think. \begin{figure}[h] \centering \includegraphics[width=\...
1
vote
0answers
2k views

How to typeset indicator function in acmart class

I want to write a special 1 character to denote the Indicator Function. The class loads Libertine fonts and I think there is no option to override them. See Section 3.8 of documentation. The ...
3
votes
1answer
1k views

arXiv: Undefined references and citations, unable to convert to PDF

I'm unable to get a simple LaTeX file with bibliography (as a .bbl file) to be processed through arXiv's TeX submission. I'm using an acmart format, which uses natbib, and it compiles fine on Overleaf....
2
votes
0answers
459 views

How to get rid of (n.d) from misc entries without date in Sigconf, ACM-Reference-Format?

I am trying to get rid of the (n.d) that appears in the citations. Below is my MWP. \documentclass[sigconf]{acmart} \usepackage{filecontents} \begin{filecontents}{ref.bib} @misc{google, title={...
2
votes
1answer
107 views

Multiple abstracts with acmart

I am trying to put an abstract titled "ABSTRACT" in English with the keywords titled "KEYWORDS" and another abstract titled "RESUMO" in Brazilian Portuguese with the keywords titled "PALAVRAS-CHAVE". ...
0
votes
0answers
32 views

Undefined reference for image

I am using the classic 2-columns acmart template, also available on overleaf. Here is the code: \documentclass[sigconf]{acmart} \usepackage{hyperref} \usepackage{xcolor} \newcommand{\MYhref}[3][blue]...
0
votes
1answer
91 views

Error on ACM conference template on TeXworks!

I've downloaded the LaTex template from this link. While compiling the LaTex file (sample-sigconf.tex), I get the following error: I haven't modified any lines in the template file, still, I get the ...
1
vote
1answer
76 views

Set footnote justification in minipage

I'm using the acmart class to write an article, and I've followed the manual's suggested means of including footnotes in a table. However, the footnotes are centred in the minipage, which I find ugly. ...
1
vote
1answer
282 views

Publisher name does not appear in a technical report bibliography entry in ACM format

I use ACM format teamplate. I have this entry in my bib file: @techreport{me15, author = {Last, First}, title = {On Testing}, type = {Final Resport}, publisher = {A University}, ...
7
votes
1answer
1k views

Package balance warning in acmart

I'm using the ACM template provided here. However, I get the following warning both in Overleaf and VSCode (MiKTeX): Package balance Warning: You have called \balance in second column Columns might ...
0
votes
1answer
357 views

“Idiomatic” block-quote formatting in a two-column paper?

I'd like to use a short(ish) quote, of a paragraph, within my article. However, if I use an environment such as {quote}, there's a massive indentation - something like 25% of the entire column text ...
2
votes
1answer
1k views

How to add a footnote mark next to author name

I need to add a mark (e.g., a star) next to an author name and a footnote with this mark at the bottom. Something similar to \footnote but at the author name. I use an ACM format article. I found ...
1
vote
1answer
579 views

ACM CCS Categorization code placement in latex file

I want to place ACM CCS Categorization code in my document \begin{document} \begin{CCSXML} <ccs2012> <concept> <concept_id>10002951.10002952.10003219.10003218</...
2
votes
2answers
219 views

How can I fully remove title and authors in ACM template, including whitespace

My university recommends to use the acmart document class for theses, while at the same time requiring a standard cover page which includes title and author information. Considering I am also limited ...
0
votes
1answer
362 views

longtable with long equation in acmart latex format

I am finding difficulty in making longtable with long equations in acmart format \documentclass[acmsmall]{acmart} \AtBeginDocument{% \providecommand\BibTeX{{% ...
1
vote
1answer
272 views

How to keep font size in document and table same [duplicate]

I am writing a paper in acmart (ACM SIGCOMM provided style). In the paper there is few tables. But font inside the tables are of variable size. Sometime they are large sometimes small. Is there any ...
1
vote
1answer
2k views

Problem with ACM bibliography style

I am writing a paper for an ACM journal. The problem is when I use the following commands: \bibliographystyle{ACM-Reference-Format} \bibliography{references} the references appear without number. ...
3
votes
1answer
242 views

dot of bold symbol does not appear in ACM format

I am writing the following equation to put a dot on a bold symbol math character but the dot does not show up; however, this works in the IEEEtran format. \documentclass[sigconf]{acmart} % % ...
1
vote
1answer
176 views

Cannot put .eps figures in the ACM template

I'm trying to put an eps figure in the ACM template but the figure does not appear (it works fine with png figure, though). When I change .8\linewidth to .4\linewidth the figure appears but ...
1
vote
0answers
482 views

proposition command does not work in ACM template

I'm going to define a proposition in ACM template but I get this error, Undefined control sequence. \end{proposition}, \documentclass[sigconf]{acmart} \let\sigproof\proof\let\proof\relax \let\...
1
vote
1answer
478 views

Why does it cause errors in subsubsubsections

I want another level of subsections (i.e. subsubsubsections). For that I am using; \setcounter{secnumdepth}{5} \paragraph{This is my subsubsubsection} However, this gives me an error saying that ...
5
votes
1answer
204 views

Why do I see this weird behavior when using the acmart class and the todonotes package?

The following (not quite) MWE \documentclass{acmart} \usepackage{todonotes} \begin{document} \title{ACM Class and the todonotes package} \author{Author} \maketitle \todo{A todo.} \listoftodos \end{...
2
votes
1answer
291 views

indentation issues in algorithm2e with acmart

I am using algorithm2e package without any problem usually with "article" or some other document classes. But with acmart (sigconf) or elsevier's elsarticle styles, I am having the following ...
1
vote
1answer
376 views

How to change the color of a section in ACM template?

I am trying to change the color of the name of a section in ACM template. \section{\color{red} My Section} I have found this solution but it did not work. It gives the error of Undefined color RED ...
0
votes
1answer
694 views

acmart natbib: how to display partial authors in the references

I am using a template acmart of ACM. I have a problem: my reference list always displays all author names of an article. Is there an option for limiting the number of authors in a reference with the ...
2
votes
1answer
1k views

How can I add more one abstract and one more keywords “section” to the ACM template

I'm writing an article for a conference in Brazil that uses the latex template from ACM format (ACM Conference Proceedings - New Master Template) and I wanted to know how can I add one more abstract ...
2
votes
1answer
722 views

How do I put two abstracts in different languages in the acmart latex template?

Recently I've started to use the acmart template to write a paper for a conference, but I need to write the abstract in two languages and apparently the template don't allow to write two abstracts, ...
2
votes
1answer
6k views

Set font size for acmart sigconf document class

I want to set the font size to 10pt for the ACM article template. But I'm not sure what the correct way to do this is. I guess it is either: \documentclass[sigconf,fontsize=10pt]{acmart} or \...
3
votes
1answer
2k views

How to remove Author's addresses in acm art?

In acmart template, I am trying to remove authors' addresses footnote which gets placed automatically in the first page. Here is a copy of this footnote: Authors’ addresses: first_name last_name, ...
2
votes
1answer
6k views

How to make two authors use the same affiliation

I am using ACM 2017 conference template. I have the first author have two affiliations, one of them is shared with the third author. I am running short of space and want to reduce space. I want to use ...
1
vote
1answer
1k views

How to add subsubsubsection to acm conference template

I am using ACM conference template. I can not add \subsubsubsection and the \par does not add number. How can I overcome this issue? Can you please help me add another level section? Here is my ...