Questions tagged [acronyms]
{acronyms} is about formatting acronyms and abbreviations using customized commands or specific packages like acronym or {glossaries}.
0
votes
0answers
16 views
Glossaries: Alternative long forms (with or without 'the')
I'm using the glossaries package for acronyms. I have a few acronyms that, depending on context, are might be prepended by a 'the' in their long form, but the abbreviation is always used without 'the' ...
2
votes
1answer
30 views
Is it possible to show a custom text for the long part of an abbreviation?
Using the glossaries-extra package, it is possible to define the used terms and their abbreviation for convenient and consistent use within the document.
But handling inflections within a sentence ...
0
votes
0answers
15 views
Center align glossary table
I have a glossary section which is styled as
\usepackage[acronym]{glossaries}
\newglossarystyle{mylong}{%
\setglossarystyle{long}%
\renewenvironment{theglossary}%
{\begin{longtable}[...
0
votes
1answer
25 views
Avoid showing Abbreviations in the Glossary with Only a Single Use
I am eperimenting with the glossaries-extra package and use bib2gls. Currently every abbreviation used in my document via \gls (for example \gls{gpu}) shows the full form on first use (that I like) ...
0
votes
2answers
41 views
List of acronyms alignment error using bib2gls
Recently I have learnt how to use bib2gls in order to generate list of abbreviations, acronyms, symbols, etc. There is a power full method described in previous posts.
However, once I tried to ...
0
votes
1answer
21 views
acronym package: acronym (fulltext)
I'm looking for a way to use the acronym package a little different:
normal:
\documentclass[12pt,a4paper]{scrartcl}
\usepackage{acronym}
\begin{document}
\begin{acronym}
\acro{snrk}[SnRK]{...
4
votes
3answers
75 views
Capitalize first letter of each word when printing list of acronyms
I use the glossaries package and when I print the acronyms using \printglossary[type=\acronymtype,title={List of Abbreviations}], part of the output I get is as shown below.
I have specified acronyms ...
1
vote
0answers
15 views
Uneven spacing between glossary entrances in the list
I am trying to make a glossary list and there is something weird going on: the spacing between entrances is uneven for no obvious reason. The minimal example of the code is below:
\documentclass{...
1
vote
1answer
71 views
Errors in using “List of Symbols” for a thesis using .bib files?
I have the wish to use an effective method to create a glossary and be able to classify the different "types" of entries in different lists (abbreviations, acronyms, symbols, glossary, etc.).
I ...
1
vote
1answer
29 views
Show abbreviations completely in some parts of the text
I am writing my thesis and am using abbreviations.
I have a tex file where I list all my abbreviations:
\chapter*{Abbreviations}
\addcontentsline{toc}{chapter}{Abbreviations}
\begin{acronym}
\acro{UI}...
0
votes
0answers
19 views
Indexed acronyms with subentries
I am writing a doctoral thesis which prints all acronyms called with \gls{} from the glossaries package to an Index made with \makeindex. I used code from a previous question: Acronyms only shown in ...
0
votes
0answers
37 views
Kile: do auto completion only when hitting spacebar
I was trying to get a good autocompletion in Kile. Therefore I made a .cwl file and used this to store all the words that I regularly misspell. I also turned on 'Auto completion for abbreviation' so ...
0
votes
0answers
41 views
Glossaries' acronyms' suffix in effect are not for the last loaded language
The glossaries' (v4.42) User Manual claims (page 48):
Note: the suffixes used to generate the plural forms when the plural
hasn’t been specified are given by \glspluralsuffix (for general entries)...
0
votes
0answers
23 views
Using glossaries package with page numbers with dash
I'm using LaTeX for my PhD thesis. Said thesis requires all chapters to get separate page numbers. So page 1-1, page 1-2, and so on.
I'm also using glossaries for my acronyms list. And these two do ...
0
votes
0answers
10 views
Sorting acronyms that start with a number? [duplicate]
In my thesis I have an acronym that start with the number 4. In the list of abbreviations it gets sorted under the F for four.
How can I sort it so it comes in the list before A?
\documentclass[...
1
vote
0answers
19 views
Acronyms expansion with glossaries in fusional language
I might be more theoretical question, but anyway.
I like to use glossaries package and the way it handles with acronyms, expanding them in the first use. It perfectly matches for English, where ...
0
votes
0answers
15 views
Conference template prevents acro abbreviations in headings
I'm using the acro package within a conference paper template scspaperproc.cls. If I use an abbreviation within a section title, it complains that the acronym is not defined. This does not happen ...
0
votes
1answer
48 views
Using glossaries with classicthesis template
I want to start writing a report with the classicthesis template, since I like the layout. The problem is it uses the acronyms package, and I would prefer to use glossaries.
I have tried to insert my ...
2
votes
2answers
46 views
Align elements inside a newcommand
I made this newcommand \boldAcr:
\makeatletter % we need to use kernel commands
\newcommand{\boldAcr[1]}{\MakeTextUppercase{\textbf{#1}}\@boldAcrOne}
\newcommand\@boldAcrOne{\@ifnextchar\stopBold{\@...
0
votes
0answers
22 views
Recursive newcommand - Align words [duplicate]
I would like to define a command that does this:
\command word1 word2 ... n-word --> Word1 Word2 ... n-Word
with first letter bold and capital.
I wrote this:
\makeatletter % we need to use ...
0
votes
0answers
21 views
Every glossaries entry link to a specific page even if there's no entry used in the page
I've built my acronyms list with glossaries package. Everything work as it should expect that, on the acronyms list, every entry, besides the actual page where that entry can be found, it also shows a ...
1
vote
2answers
84 views
Acronym package: Reset specific acronym
I'm using the acronym package to produce a list of abbreviations and acronyms. Now, I want that the full name is printed for one acronym on a specific place after it has been already used.
Example:
\...
0
votes
0answers
21 views
Customization of glossaries-extra
I use the glossaries-extra package with this preamble:
\documentclass{article}
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[italian]{babel}
\usepackage{hyperref}
\usepackage[...
1
vote
1answer
21 views
Change the display of ( ) in a - in the glossaries package
I'm using the glossaries package and when I use \gls for the first time it shows "Complete name (acronym)"
How I can change the ( ) with a single - so it prints "Complete name - acronym"?
0
votes
0answers
40 views
Customize acronyms usage of first use
So I have a list of acronyms defined with the glossaries package, like such:
\newacronym{mac}{MAC}{Medium Access Control}
but also some of these:
\newcommand{\mk}{Master Key}
because the latter ...
5
votes
1answer
466 views
Getting errors using Acro for abbreviations and acronyms: Undefined Control Sequence in acro.sty
I've been trying to use acro for abbreviating terms in a report. It mostly works but each compile requires intervention to complete and does something to my first page, leaves an =1 and a page break. ...
0
votes
1answer
32 views
Showing List of Acronyms without a result
I'm trying to create a list of acronyms with Glossary.
My main .tex use a \documentclass{Dissertate}
Before trying using Glossary I had a .tex where manually added the acronym. To print on my document ...
1
vote
1answer
32 views
Aligned at the same margins acronym and listofsymbols
First of all, I know, that it would be much easier to use the glossaries package. However, maybe there is still a solution to my question. Here is a short MWE:
\documentclass[ngerman]{article}
\...
0
votes
1answer
45 views
How to set a user-style for abbreviations with glossaries-extra?
I used glossaries package to create a list of acronyms and made my own glossary style, like in MWE:
\documentclass{article}
\usepackage[nopostdot,nonumberlist,acronym]{glossaries}
\newglossarystyle{...
3
votes
1answer
55 views
Different abbreviation options for the same acronym in glossary
I want to be able to have an acronym in glossary, which when referred to with \gls{} would appear in the main text in a standard form, unless specified otherwise.
I.e. i have the following acronyms:
...
1
vote
0answers
19 views
Glossaries in section headings without shortening after TOC
here is another question from my LateX project.
Currently I'm using the package glossaries to mange my acronyms. I use some acronyms in sectionheadings. Therefore the acronym is first discribed in the ...
1
vote
0answers
52 views
Adding a feature to the acronym package
I am trying to add four specific features to the acronym package and plug it into Overleaf:
\acrounlisted - creates an unlisted acronym, which would be treated like an acronym (in that the first time ...
0
votes
0answers
129 views
Nomenclature and Abbreviations LaTeX
Currently, I am working on my Master's Thesis in LaTeX and I want to put a List of Abbreviations and Nomenclature in the same fashion you can put a list of figures and Tables.
I have no problems ...
1
vote
1answer
37 views
How to make only a list of abbreviations?
I am using How to create both list of abbreviations and list of nomenclature using nomencl package? to create a list of abbreviations. The code is below:
\usepackage{nomencl}
\usepackage{etoolbox}
\...
0
votes
1answer
38 views
How does one use the \abbrlist command?
I am trying to compile a list of abbreviations for my PhD dissertation. The Latex template (Cornell) suggest I use the \abbrlist command but I can't seem to be able to generate a list with acronyms ...
1
vote
1answer
62 views
Cite first instance of an acronym
I'm using the acronyms in the glossaries package such that I can do this:
\newacronym{MIRDD}{MIRDD}{Mid-Infrared Diagnostic Diagram}
\gls{MIRDD}
\gls{MIRDD}
This stores the acronym and then prints
...
4
votes
1answer
36 views
Linguistic glosses with Leipzig package including morpheme boundaries
I just started using LaTeX and am using the Leipzig-package for linguistic glosses, that I also want to appear in a glossary. In the Leipzig package only the glosses themselves are defined, while ...
3
votes
0answers
45 views
Cite books with abbrevations in a specific style
I have many books from one author which I need to cite with abbrevations in a specific style: ([AbbrevationBook] [Paragraph] [:] [PageNumber]) so that the result looks like this: "Lorem ipsum..." (SM ...
0
votes
1answer
81 views
Cannot see the acronyms list
I ma using a template in overleaf and I have this chapter for achronyms:
\chapter{List of acronyms}
{\small
\begin{acronym}[XXXXXXXX]
\Acro{GNU} {\acs{GNU} is Not Unix}
\acro{OO} {...
2
votes
1answer
35 views
Increasing Space between Abbreviation and Full text in Acronym List
I am inserting some acronyms in a two-column scientific paper. Few of my abbreviations are large and are overlapping with their definitions. I am using acro package. Is there any way to increase the ...
0
votes
0answers
25 views
Is Non-breaking space (~) required for \gls commands of the glossaries(extra) package(s)?
There is a really quick question.
Should I use a non-breaking space ~ in front of the \gls commands (for acronyms in my document) when using the glossaries-extra package?
1
vote
0answers
36 views
Changing \parskip in List of Abbreviations (glossaries)
I am creating a document, in which I need a List of Abbreviations. I liked the style alttree, so I use it.
Now, I want to change the distance between the entries in the LOA, so to say change the \...
4
votes
1answer
59 views
How does text styling for synonyms work in ConTeXt?
So I set up synonyms (here abbreviations) similar to the example on the Wiki (and expanded for first use as in this post).
\definesynonyms [abbreviation][abbreviations][\infull]
\setupsynonyms ...
1
vote
0answers
106 views
Acronyms in LaTeX with lowercase and uppercase plurals and singular forms?
I am using the Glossaries package to write acronyms (i.e. abbreviations) using \gls{}, \Gls{}, acrlong{}, acrlongpl{}, acrshort{}, acrshortpl{} ... the whole family. I have 2 pages that appear in my ...
2
votes
2answers
207 views
How do I increase the space between the abbreviation and definition?
I'm using the glossaries package to create a list of abbreviations.
I would like to set the horizontal space between the abbreviation and definition to 2.5 cm. I realise this question has been asked ...
0
votes
0answers
12 views
Make first letter uppercase using the acronym package [duplicate]
Using the acronym package if I start a sentence using the command \ac{ABC} the first letter of the expanded acronym is lower case.
I tried to define a command:
\newcommand{\Ac}[1]{\xmakefirstuc{\ac{#...
0
votes
1answer
60 views
How to style first acronym and first glossary appearance
I would like to define the following styling for my acronyms and glossary in my latex project.
or look here for a small example in Overleaf
Currently I have tried it with the following code but the ...
0
votes
0answers
22 views
How to print a full acronym in inverse (long form in parentheses)
I'm using the acronym package, and when referencing my acronyms with \ac, they're printed as long name (abbreviation).
However, I would like them to be printed as abbreviation (long name). Is there ...
1
vote
1answer
53 views
Acronym - german word, english abbreviation
I am dealing with abbreviations. My most ones are in english, but my text is in german. Since it is not necessary to write out the long English word in the text, I only want it to be listed in the ...
2
votes
1answer
61 views
Acronym aliases with acro
I am trying to define a command that would easily create aliases for acronyms defined with the acro package. I would like to define dozens of aliases of different acronyms without having to duplicate ...
