Questions tagged [anchor]
The anchor tag has no usage guidance.
49
questions
0
votes
0
answers
38
views
tikzpicture ends up way outside the limits of the page
In my document which is defined as A4, I want to place our logo in the upper left corner of the first page. The code I'm using for this is:
\begin{tikzpicture}[remember picture,overlay]
\node[...
3
votes
2
answers
107
views
Change anchor location throughout TikZ foreach loop?
I have some TikZ code to generate a unit circle with N evenly spaced vectors going from the center to the circumference of the circle.
\begin{tikzpicture}
\newcommand\wpic{4}
\newcommand\wcir{3}
\...
0
votes
2
answers
38
views
tikz: fit rectangle to content and rectangle nodes
I'd like these two rectangles are positioned side by side, aligned with their upper side, without having to "manually" calculate the position, using the anchor points.
I've made sure that ...
1
vote
1
answer
50
views
tikz - flatten/flush line with rectangle
I drew the following picture below.
To extend squares, I attached lines at the corner angles, i.ex node.45. It can hardly be seen, but they are are not exacly in one line.
How is it possible to flush/...
2
votes
1
answer
91
views
Draw to anchor of new node at coordinate in TikZ
Is there a way to directly draw to a new node, specifying the connection anchor but still center the node at the new coordinates.
To exemplify:
% Points at center of node
\draw (root) -- (1,1) node {};...
1
vote
1
answer
64
views
Positioning a pgfplot inside tikz (understand anchors, rotation and scale)
I'm trying to rotate the plotting of a parabola above a tikzpicture. (For a parabola, I can achieve what I want without using pgfplots, but I need the same for more complicated plots.) I can't seen to ...
1
vote
1
answer
64
views
Node anchor too far away from node text
I'm using a loop to write several labels for line intersections, but perhaps for reasons of scale or something the labels are a bit too far away from the intersections. I can't fix each manually since ...
2
votes
0
answers
26
views
Tikz/PGF Anchors at locations computed in \backgroundpath
I am trying to create an AO logic gate, which consists of three predefined shapes, as via \declarepgfshape. So far, I was able to define the shape in \backgroundpath. However, I want to have some ...
1
vote
2
answers
47
views
On the strange label location using node, anchor and resistor
Let us assume that we have 2 resistors one on the positive x axis and the one on the negative x-axis, shown below:
I want to label them by Rusing a node whose south anchor located at the north anchor ...
-2
votes
1
answer
44
views
Jump to different anchor in \draw chain
Sometimes chaining \draw commands comes in handy for me, e.g., in the following example:
\begin{tikzpicture}[
box/.style={draw, minimum width=1.5cm, minimum height=1cm}
]
\draw
node[box] (ui) {+}
...
3
votes
1
answer
83
views
How to anchor fork separation in forest trees
In the process of creating a family tree using forest, I have used forked edge style in the main for tree{}. However when the children node texts vary in length, the parent node's fork loses it's ...
5
votes
2
answers
144
views
How to make a node grow differently when other nodes are forked
I am a beginner in latex and am very interested in exploring it's wide range of features. I wanted to build a family tree and decided to use the forest package. I use this manual - forest_doc.
I ...
1
vote
1
answer
46
views
Set PGF anchor position in custom pgfshape with pgfkey as string?
How can I go about using a pgfkey to place an anchor if the key is a string?
Previous answers imply that setting anchors based on keys is possible using numerical keys (like this question on Creating ...
2
votes
1
answer
218
views
Circuitikz: drawing an IC with pin on the top and bottom?
I want to be able to create a node that has anchors on the sides as well as on the
top and bottom like in the block labelled "555 Astable" in the following picture (credits):
The dipchip ...
2
votes
2
answers
284
views
How do you use an anchor of a TikZ circle?
I drew a circle with
\draw (0,0) circle (3);
and I want to put an arrow pointing to the right at the base of it. Something like
\draw [-latex] (circle.south) -- ++(2,0);
The alternative option ...
4
votes
1
answer
1k
views
What is the purpose of Anchors in TikZ?
Say I drew an arrow as
\draw [thick, ->] (0,0) -- ++(2, 0);
and now I want to give that arrow a label, $v$, at its tip using a node as
\draw [thick, ->] (0,0) -- ++(2, 0) node[right]{$v$};
...
2
votes
1
answer
139
views
Arrows are shifted left tikz
I am having some issues recreating these Work breakdown structure. I have seen one similar example from TeXample.net (here source), but I am still not getting the exact thing like in the picture below....
2
votes
1
answer
209
views
How can I set a tikz-node's anchor using a variable?
The following code works as expected.
\documentclass[tikz,margin=1em]{standalone}
\usetikzlibrary{math}
\begin{document}
\begin{tikzpicture}[scale=3]
\draw (0,0) circle [radius=1cm];
\foreach \a in {0,...
2
votes
1
answer
163
views
Placing the anchor next to decision node
I am trying to place an anchor next to decision node but with the current code I have, it places it at the end of the arrow.
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage{tikz}
\...
2
votes
2
answers
369
views
Tikz: positioning of circular framed photo in top right corner of CV, with control over the frame thickness and color, and x/y position
My question is about photo positioning in Tikz.
I am writing a CV, in which I want to insert a photo on the top right corner, with a circular shape and a frame, thickness and color of which I can ...
3
votes
0
answers
61
views
Anchor at end of every line
Is it possible to fix any Anchor or any indicator at the end of each an every line of a document? Also note that Anchor/Indicator should not be displayed in the output. I am searching for this to ...
2
votes
1
answer
293
views
Is there a beautiful Symbol of \anchor?
I wish to find a beautiful Symbol of \anchor.
I can only find the anchor symbol in package dingbat, unfortunately, this anchor symbol is so ugly.
Has somewhere cute anchor?
1
vote
1
answer
167
views
Hyperlink/Hypertarget Jumping to line below desired location
I have a custom commands for setting up two way hyperlink/hypertargets:
\documentclass[a4paper]{report}
\usepackage[english]{babel}
\usepackage[utf8]{inputenc}
\usepackage[hidelinks]{hyperref}
\...
3
votes
2
answers
124
views
How to "pin" a node to an anchor (also for later references)
First, a disclaimer: I cannot believe that I'm the first one asking that, so I probably missed an obvious answer.
We can use anchors to position a node. But after positioning, the default anchor for ...
1
vote
1
answer
79
views
Forest: Help with automatic anchoring of nodes relative to edges of other nodes
I have trees in forest, where each node in the tree is annotated with a superscript (index) and a subscript (outdex), which I instantiate as separate nodes and position in the left and right corner of ...
0
votes
0
answers
85
views
Tikz aligning elements by their anchor positions
i found a lot of information about the positioning on Nodes, but i couldn't really apply the solutions to my problem.
I have two nodes defined in a seperate file. The left one has an anchor RD1 and ...
0
votes
1
answer
43
views
Anchor in nodes near coords is not working
In order to plot negative percentages under de bar en positive above de bar. I used the anchor argument, and used the dependence on visualization for each coord. However, my anchor is not working ...
1
vote
1
answer
384
views
Circuitikz: Anchor names of bipole terminals
I want to use the left and right terminal of a bipole as an anchor to continue drawing from there. Resistors offer the anchors left and right and they are almost what I need. However, they are too ...
0
votes
0
answers
136
views
Move anchor point of hyperref
In this LateX template :
http://www.latextemplates.com/template/the-legrand-orange-book
there are automatic pdf bookmarks that allow the reader to jump from part I to part II for example in Adobe ...
0
votes
0
answers
126
views
tikz: anchor to rectangle split on a fraction of a side
Is it possible to anchor to a rectangle with a specification not based on angles?
For instance, in this example:
\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{shapes,arrows,positioning}
\...
4
votes
2
answers
847
views
Hyperlinks to web sites using anchors sometimes don't work
I am not sure if this is an issue with how web sites are configured, or the hyperref pacakge. The following two links are correct (which you can verify by copying the first paramater to \href{}{} and ...
1
vote
1
answer
104
views
assign different anchoring to nodes with negative coordinates in bar chart addplot
I need to make nodes with negative coodinates be anchor=east. How can I do that when I have nodes near coords style = {anchor = west,..} before \addplot? Should I create an individual \addplot for ...
0
votes
1
answer
157
views
Custom text anchor
TL;DR: How do I achieve what's in the picture in Latex?
I am working on a personal manuscript of scripture, where I am stripping Biblical text of all chapter/verse markings, punctuation, etc. and ...
2
votes
1
answer
80
views
Coordinates of a subpart of label (or multiple nodes that preserve text spacing)
I have two equations (one on top of the other) and I'd like to relate elements of the first one to elements of the second one by drawing an arrow between them.
I though of two ways to solve that:
...
4
votes
2
answers
335
views
tikz rectangle nodes fail to align
I'm trying to align 2 nodes (instr0 and instr1) to the left. I've followed How can I align two nodes to the left in TikZ? however it doesn't quite work as I'm getting the following error:
! Package ...
6
votes
2
answers
659
views
CircuiTikZ: Start ground relative to the closest component
Here is a short compilable example
\documentclass{article}
\usepackage{tikz}
\usepackage{circuitikz}
\begin{document}
\begin{circuitikz}
\draw node[ground]{} to [short,*-] (0,0) to [C] (...
1
vote
1
answer
162
views
How to change footnote anchors
I'm trying to write some code that lets me use footnotes inside stackrel multiple times in a single equation, and so far this is what I've come up with
\documentclass{article}
\usepackage{hyperref}
\...
4
votes
2
answers
217
views
tikz-cd nested tikzpicture wrong center anchor
I want to place a tikzpicture in a node/cell of a tikz-cd diagram and then paint some more stuff in the inner tikzpicture. However, it seems that the nesting messes up the center anchor.
Concretely: ...
2
votes
1
answer
414
views
Greater control of progress label positioning in pgfgantt
The following mwe is a bit of misuse of the pgfgantt package. It is supposed to show the relative effort of various subtasks making up a greater task and the state of completion of each subtask, etc. ...
1
vote
0
answers
55
views
Anchored path compiling indefinitely
I want to make rounded corners on one side only like this:
\tikz{
\fill[red]
(0,0) +(8pt,8pt) arc (0:-90:8pt) -- (0,1) arc (90:0:8pt)
}
The points (0,0) and (0,1) in the above are placeholders. I ...
4
votes
2
answers
235
views
TikZ: flipping shape without moving anchors
When drawing game trees in TikZ, I use upwards-pointing triangle to denote the maximizing player 1 and downwards-pointing triangle for the minimizing player 2.
However, my current solution doesnt make ...
4
votes
2
answers
568
views
Forest: How do I automatically align tiers and have parent anchor=south
I am trying to make basic linguistic trees in Forest that do two things: 1) have the bottom leaves aligned on a single tier, and 2) have parent anchor=south. (Actually I have a third requirement as ...
1
vote
1
answer
76
views
Is it possible to jump to the image with href while not using captions?
I am using various figures throughout my documents without captions. In order to reference them I use the command \refstepcounter{figure} before labelling them with \label{fig:label}. However, when I ...
5
votes
3
answers
768
views
Define coordinate with anchor point
I have macros that use anchor points in pgfplots to access certain coordinate. For instance, in a graph I can invoke a macro such as:
\newcommand*{\DoSomethingWithXAxis}{%
\draw [ultra thick, blue] ...
1
vote
1
answer
637
views
Draw comparator and invert it
I have drawn an error amplifier but I wanted to invert the terminals.
And how to draw a comparator in circuitikz. There's a screenshot attached.
\begin{figure}[h]
\begin{center}
\...
2
votes
2
answers
109
views
Efficient way of performing geometrical operations
I have to draw a series of regular (equiangular, actually) polygons, each of which is constructed by trisecting the sides of the previous polygon and subsequently cutting off its corners.
Right now I'...
3
votes
3
answers
417
views
Define east/west anchors for a matrix with one column
I have the following code:
\documentclass{article}
\usepackage{amsmath}
\usepackage[margin=0.5in]{geometry}
\usepackage{rotating}
\usepackage{tikz}
\usetikzlibrary{calc}
\usetikzlibrary{matrix}
\...
3
votes
1
answer
1k
views
How to anchor a transistor along a direction with circuitikz
I'm drawing a simple nmos differential pair with a bias transistor and I want to connect the drain of the bias transistor to the midpoint of the sources of the differential pairs.
\documentclass[...
2
votes
1
answer
441
views
Positioning nodes problem with default anchor
Here is a MWE of my problem:
\documentclass[tikz]{standalone}
\usetikzlibrary{positioning}
\usetikzlibrary{quotes}
\RequirePackage{luatex85}
\begin{document}
\def\a{1cm}
\begin{tikzpicture}[
large ...