Questions tagged [appendix]
An {appendix} is an addition required to be made to a document by its author subsequent to its printing or publication.
299
questions
1
vote
2
answers
33
views
Make a table of contents specific to appendix (article class) and display "Appendices" as a section in main TOC
I'm writing a document with article class and I compile it with TexMaker/pdfLatex.
I want to create a local table of contents for the \appendix but I don't want \section{} and \subsection{} written ...
1
vote
1
answer
32
views
Help to make appendix look decent
enter image description here
Hope someone can help me make these appensix´s look just a little bit better or has some tricks to make the image appear bigger :)
0
votes
0
answers
18
views
Appendix-only table of contents in Revtex
I am working with the Revtex document style, and would like to add a table of contents to the beginning of my appendix which excludes reference to the main text sections. How can I go about doing this?...
0
votes
0
answers
21
views
Backup slides with `beammerappendixnote` and `\pause` breaks hyperlinks
I'm using \pause-steps, and beamerappendixnote to provide links to appendix slides. The appendix slide gets linked after the first \pause:
\documentclass[20pt]{beamer}
\usepackage{beamerappendixnote}
\...
0
votes
0
answers
12
views
Repeating the entire document in the appendix and make theorem numbers match
I am submitting to a conference that allows limited number of pages. I have seen some people include the entire document in the appendix and take few important section to the main body. This way, ...
0
votes
0
answers
12
views
Formatting Appendix
I'm having trouble with my appendix.
It shows something like "A {my input}", "B {my input}" and so on.
I want to format it them as "Appendix {input or number}".
How can I ...
0
votes
0
answers
21
views
Reference Figures in the body differently as from inside the appendix
I want to reference Figures, Tables etc. from the body differently when they are placed in the appendix.
However, inside the appendix, they should be referenced as usual.
Here is a small working ...
1
vote
1
answer
49
views
Help with keeping long table continuous across pages
I have a long table created using the longtblr environment from the tabularray package, which spans across 10 pages. Additionally, I have a smaller tblr table that needs to be placed at the bottom.
...
0
votes
1
answer
24
views
Having a different numbering for sections, subsections and theorems in appendix
I am using the elsarticle class.
It defines:
\def\appendixname{Appendix }
\renewcommand\appendix{\par
\setcounter{section}{0}%
\setcounter{subsection}{0}%
\setcounter{equation}{0}
\gdef\...
0
votes
0
answers
25
views
Author adress problem in supplementary section within article
I'm using an elsarticle template and using \appendix to include a supplementary material section to be able to reference tables, figures or equations from the supplementary material section in the ...
0
votes
0
answers
20
views
Importing Classification Sheet from NVIVO - any way?
I am writing a systematic literature review andusing Nvivo for data extraction and synthesis. I have made a classification sheet with all information for my Descriptive Analysis table ( Authors - ...
2
votes
0
answers
59
views
Exclude Appendix sections in toc but keep list of appendices
I know this is a common problem, but none of the questions I read answered my own problem. So, after hours (days?) of trying, I need to ask you myself.
I have used the appendix package to create my ...
1
vote
1
answer
120
views
How to remove before dot in appendices in ieee access template?
I like to remove the dot that appeared in the PDF using the IEEE Access template (on page 5 in the PDF, before the text, "Appendixes, if needed, appear before the acknowledg-
ment." Could ...
1
vote
1
answer
46
views
How can I remove chapter name at the top of appendix and bibliography pages using fancyhdr package?
I am using fancyhdr package to add chapter name at the top of each page. The code of a simple LaTeX example:
\documentclass[a4paper,10pt]{report}
\usepackage[utf8]{inputenc}
\usepackage{fancyhdr}%Add ...
0
votes
0
answers
58
views
How to label Figures and Tables in 2 sections with prefix and separately?
I am writing a manuscript using the latex template of Springer-Nature publisher. However, the journal I am interested has the special requirement that two sections, 'Extended Data' and 'Supplementary ...
0
votes
0
answers
14
views
Appendix section position in toc
main.tex
\documentclass[12pt]{report}
\usepackage[margin=2.5cm, noheadfoot]{geometry}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[main=magyar,english]{babel}
\begin{document}
\...
0
votes
0
answers
22
views
hyperref points wrong table with reset counter
I have an issue with hyperref and reference to my tables listed in the appendix section. It seems for some tables there is confusion in listing the right table number.
For ex. Table (A8) is cited ...
0
votes
1
answer
66
views
Appendix shows whole list in the Content section
I am actually not sure if this is correct behaviour but I have an Appendix with multiple entries and it works fine. But in my Content table it shows all the entries. I think it should be hidden and ...
2
votes
1
answer
48
views
Latex different appendix section label
\documentclass[12pt]{report}
\usepackage[margin=1.5cm, noheadfoot]{geometry}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage[magyar]{babel}
\usepackage{graphicx}
\usepackage{float}
...
0
votes
1
answer
26
views
Reduce white space between top of page and Chapter, Bibliography and Appendix head titles in report class?
Due to default setting of report class, there is white space between top of page and TOC, LOT, LOF, Chapter, Bibliography and Appendix head titles and I wish to reduce this space. I successfully ...
0
votes
1
answer
62
views
How do I remove the word 'Appendix' in the title of my appendix
How do I remove the word "Appendix" in "Appendix A"? Or, what can I do so that my lemma just says "Lemma A.1"? All I have used in my code is \appendix followed by \...
0
votes
0
answers
39
views
How to label and refer to appendix correctly
I am writing a report and I've tried to solve this problem by looking at other similar questions, however I'm not able to find a question matching mine exactly.
All I want is to refer to something in ...
0
votes
0
answers
14
views
How to label/reference a table in appendix [duplicate]
I'm trying to get a reference with the name A.1 instead off ?? as shown in the example. I noticed that removing the package caption change the reference to A, so the problem still persist. Anyway I ...
2
votes
1
answer
144
views
Fetching article title and other information automatically in appendix
I am writing a paper using article class. The paper has a lengthy appendix at the end and it should have the title "Appendix to Paper Title", author name and date. Until this point this is ...
0
votes
1
answer
38
views
How to make cleverref start appendix with number instead of a letter?
I'm using cleverref, but I want the appendices to be numbered as Appendix 1, Appendix 1.2, and so on. Instead, it starts with letters as Appendix A, Appendix A.1, etc.
I have the following lines ...
0
votes
1
answer
34
views
How to fix: "deeper" PDF bookmarks disappear when \addtocontents{toc}{\protect\setcounter{tocdepth}{1}} is added
My book class-based document normally has structure Chapter -> Section -> Subsection -> Subsubsection. And usually, PDF bookmarks in a PDF viewer (e.g. Adobe Reader) reflect just that. Here ...
0
votes
0
answers
144
views
Separate list of figures and tables from the appendix
for my master's thesis I need a special layout which is suggested by the university. Currently, I have problems with the appendix. In the table of contents there should only appear an entry which says ...
0
votes
1
answer
80
views
How to restart the page numbering in each appendix
I would like to change the start numbering in each appendix, with the code below, I keep the numbering from the last section. For example, I would like to have A1/9, A2/9, and when I start a new ...
0
votes
0
answers
16
views
List of appendices within the appendix at the end of the document
\documentclass[12pt,a4paper]{article}
\usepackage[english]{babel}
\usepackage{tikz}
\usetikzlibrary{positioning,chains}
\usepackage{times}
\usepackage{hyperref}
\usepackage{booktabs}
\usepackage{...
0
votes
0
answers
27
views
Create TOC at end of document
I would like to create a TOC at the end of the document which has both figures and tables inside it. This makes sense for my case as it should be a small appendix, which captures only those parts. I ...
2
votes
1
answer
49
views
How do I make endfloats and appendix table numbering work together
I am trying to make LaTeX do two things, both of which work in isolation, but not together.
My desired result is a main text followed by bibliography and all tables and figures numbered normally, ...
0
votes
1
answer
23
views
Some modifications to the appendices appearance
Consider the following mwe:
% Packages and bibliography
\documentclass[english,a4paper,9pt,oneside]{scrbook}
\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\usepackage[titletoc,title,page]{...
0
votes
1
answer
78
views
beamerappendixnote does not work with \pause
I use beamerappendixnote to manage backup slides in beamer, for maintaining a useful code structure without manually fiddling with beamergotobuttons. One problem is that it does not seem to work in ...
2
votes
1
answer
68
views
Appendix (with quoted literature) after bibliography
I have the following question (also asked in German on goLaTeX): My thesis is structured like this:
Chapter 1
chapter 2
Chapter 3
Complete bibliography
Appendix
Chapter A
Chapter B
My problem: In my ...
0
votes
0
answers
31
views
No Part number in TOC for appendices with titlesec/titletoc
Aubrey Blumsohn gave the answer to "Add 'Part' before the number in Toc when using titlesec package". However, with Appendices the Part number fails to appear.
Here is a MWE:
\...
-2
votes
1
answer
34
views
Use fullpage only in Appendix part of the document
In my document (uses llncs.cls) I would like to use \usepackage{fullpage} only in appendix part, not in the initial 10pages. Any help would be appreciate.
1
vote
1
answer
78
views
Appendix prefix not showing in TOC when using partial ToC
I tried to use this solution to make partial ToC in my document, but when I added my appendix, it changed the behavior of the appendix package. In spite of putting \usepackage[page,toc,titletoc,title]{...
0
votes
0
answers
42
views
Appendix and Bookmark
My goals are as follows:
Show the appendix as a section without numbering in the main text.
Show an item named "Appendix" in the bookmark.
When clicking the "Appendix" in the ...
2
votes
2
answers
119
views
Place the bibliography right below the appendix
I want to put the bibliography right below the appendix as follows but it doesn't work. The long table is the appendix.
How can I fix this?
Is it normal to do it like this or should I put the ...
1
vote
0
answers
55
views
How can I change the size of appendix in the document
Dear everyone:
I would like to change the size of the title of appendix in the article.
I use the following packages:
\usepackage[toc,page]{appendix}
\usepackage{titlesec}
I use the following code to ...
0
votes
0
answers
36
views
Set header 'Appendix' in subappendices environment
I've created a subappendices environment to use at the end of chapters in my thesis. Directly before this in the chapter is the references section. So, in the preamble;
%subappendix setup
\...
0
votes
2
answers
55
views
How can I add an annex without page number to table of contents? [duplicate]
I am trying to add an Annex to my thesis. I've written it in document class, report.
I don't want it show the page number of Annex in the table of contents.
So far I've tried using \pagestyle{empty}.
...
0
votes
0
answers
105
views
How can I remove "openright" behaviour for a part of a latex document (appendix) so that section can also be on even pages?
I want to remove the blank pages when a section of my appendix starts. I use for every material in my appendix a new \section. If it is on an even page, it leaves one free/blank and starts on the next ...
0
votes
0
answers
79
views
Table of Contents Only in Appendix
I am writing a paper using the IEEE conference template. There is no Table of Contents at the start of the paper. To make the supplemental materials easier to navigate for readers, I wanted to put a ...
0
votes
0
answers
55
views
Numbering subappendices by number instead of letter
I am using package appendix to manage several subappendices within each chapter of my thesis, but I would like all my appendixes to be denoted by A and numbered by number instead of by letter.
E.g.: ...
1
vote
1
answer
43
views
Sections in Appendices list are not idented in the table of contents
The section title in the list of Appendices is not being indented, but the subsection title is indented. So, for example, the outline of Appendices in my table of contents looks like this:
APPENDICES
...
1
vote
1
answer
59
views
Modifying subsection headings in appendix, elsarticle document class
Could anyone tell me how to modify the headings in Appendix of an article? I need to suppress the word 'Appendix' in the subsection headings to A.1. Subheading-1, A.2. Subheading-2 and so on (please ...
0
votes
0
answers
18
views
Appendix referencing is not working when using arabic with babel
I am using arabic and french in a report document using babel, the arabic is used for the abstract and it's not used in the appendix (the appendix is 100% in french).
When using only french in babel ...
0
votes
1
answer
53
views
The usual method doesn't let me number appendix tables as A1, A2, etc
I would like to number my appendix tables A1, A2, and so forth. To do this, I used the answer to this question and tried writing
\setcounter{table}{0}
\renewcommand{\thetable}{A\arabic{table}}
before ...
0
votes
0
answers
29
views
how to keep entries at least 1/2'' away from the page number column
I am working on my dissertation and I am facing a problem in the LOF only for the appendix figures. They go too close to the number column.
How to keep entries at least 1/2'' away from the page number ...