Stack Exchange Network

Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [beamer]

{beamer} is a document class for creating presentations and slides. For general questions about presentations or slides, independent of the document class, use {presentations} tag instead.

0
votes
0answers
16 views

Defining blocks in sty file [duplicate]

I am defining blocks in sty file \setbeamercolor{block alerted title}{fg=white,bg=UBCblue} \setbeamercolor{block alerted separator}{bg=white} \setbeamercolor{block alerted body}{fg=black,bg=white} ...
4
votes
2answers
822 views

limiting effect of \huge{} to only specified text

I am creating a beamer presentation where I want a heading for a slide in larger font, followed by the body of the slide in smaller font. Problem being, my current approach appears to cause all of the ...
0
votes
0answers
28 views

Section titles for documentclass beamer

I am using the template available here to make a poster. Using section in the document doesn't display the section titles, \section*{Equation 2:} \subsection*{Number = 2} \begin{equation*} X = CS =...
2
votes
1answer
16 views

Is there anyway for Tikz-cd to point at the beginning of a node instead of the middle

This code \documentclass{beamer} \usepackage{amsmath} \usepackage{tikz-cd} \begin{document} \begin{frame}[fragile, t]{My slides} \begin{equation*} \begin{tikzcd} \text{The starting point} \arrow{d}...
1
vote
2answers
17 views

Tik-cd arrow length not the same across different frames

This is the code for the first frame \documentclass{beamer} \usepackage{amsmath} \usepackage{tikz-cd} \begin{document} \begin{frame}[fragile, t]{My slides} \begin{equation*} \begin{tikzcd} \text{...
1
vote
1answer
236 views

Proportionality rule

I'm trying to write the proportionality rule in beamer. MWE \documentclass{beamer} \usetheme{Berlin} \usecolortheme{beaver} \usepackage[spanish]{babel} \usepackage[utf8]{...
2
votes
1answer
18 views

How can I circumvent running the bibliography in texstudio

I am creating a beamer presentation with several plots and tikz figures. It takes a long time to compile and view. This is only amplified by the fact that texstudio apparently runs pdflatex and the ...
3
votes
1answer
29 views

Beamer: Absolute Positioning of Picture | Unexpected Padding

I want to place/position images/pictures/elements in beamer absolutely. I use the well known remember picture and \node at (current page.xx) appraoch. In my MWE I want to position the picture in the ...
2
votes
1answer
33 views

Redefining \label to not default to <1>

According to this question, labels are defined by default on a beamer slide to always be defined at the first slide <1>. Indeed \show\label shows > \label=macro: ->\@ifnextchar <{\...
2
votes
1answer
24 views

Tabular: lines with \pause get line added

When I try to build this: \usepackage{array} \documentclass{beamer} \begin{document} \begin{frame}{Bibliotheken} \setlength\extrarowheight{5pt} \begin{tabular}{|l|l|l|l|l|l|} \hline ...
19
votes
4answers
2k views

Thumbnails of other frames in beamer

I would like to make a presentation with beamer, and have a few frames (at the start or the end) containing thumbnails of the other frames, hyperlinked to them, with something like 4x3 or 5x4 ...
1
vote
1answer
124 views

interpolate with graphicx and beamer in luatex

In TeX Live 2015, using the interpolate option of \includegraphics{...} with lualatex causes an error unless one specifies \pdftexversion appropriately. For example, following Knut’s explanations in ...
1
vote
1answer
33 views

How to insert `beamercolorbox` above other contents? (beamer)

I would like to add a bibliographic reference on my second slide. The contents of the bibliographic reference should be placed above all other contents. I tried the following, but the problem is that ...
0
votes
1answer
30 views

Tikzcd with Beamer: extremely simple code results in & ampersand catcode error

\documentclass{beamer} \usepackage{amsmath} \usepackage{tikz-cd} \begin{document} \begin{frame}[fragile, t]{My slides} \only<1>{ \begin{equation*} \begin{tikzcd} a \end{tikzcd} \end{equation*}...
1
vote
1answer
146 views

Switching between U3D views in beamer

for a presentation I like to switch between several views of my 3D model. I'd like it to behave like slides, going through one view with each click. I found an answer here, however this solution isn'...
1
vote
3answers
98 views

Miktex compiler fails to compile my presentation

The following link is for a presenation I am preparing for a presentation tomorrow. The surprising thing is that it does not compile using MikTex 2.9. Although the latest updates have been installed....
32
votes
2answers
24k views

LaTeX Error: Option clash for package xcolor

I have an option clash between package xcolor and another package, but I don't know which. Here is my MWE \documentclass[10pt]{beamer} \setbeamertemplate{navigation symbols}{} \usepackage{caption} \...
5
votes
2answers
711 views

Write the word 'M$\ddot{\rm u}$ller' in thebibliography

With the following codes \documentclass[xcolor=dvipsnames]{beamer} \mode<presentation> \usetheme{Madrid} \begin{document} \begin{frame}{} \begin{exampleblock}{\...
1
vote
1answer
394 views

Package csvsimple: How do I reject the last line of a csv file

Ultimately I want to read a csv (comma separated variable) file into LaTeX and display a table. I'm doing this within the beamer document class. I'm currently using the \csvautobooktabular command ...
1
vote
1answer
19 views

Extra spaces when mixing beamercolorbox and tikzpicture

I am trying to create custom beamer blocks for a template using a tikzpicture for the title of the block and a beamercolorbox for the body. Here is a MCVE: \documentclass[t]{beamer} \usepackage{...
15
votes
2answers
15k views

beamer dark theme

I have a very simple question - there are a bunch of beamer themes, however, all of them have white background. I would like to use some theme, let's say Warsaw (since it is perfect), however I'm ...
2
votes
3answers
1k views

Beamer frames show a white line on top

I want to make a presentation with the beamer class. However, there appears an annoying white horizontal line on top of all pages except the first one. The line thickness is only about 1mm, but it ...
4
votes
1answer
8k views

Problem with beamerthemesplit package

Just turn from PowerPoint to Latex for slides:). A problem encountered: Templates from beamerthemesplit can't be properly applied as the snapshot below. What may be the reason? BTW, are there any ...
2
votes
2answers
21 views

macro within pgfplots in beamer

I want to create a macro so that in a beamer presentation it produces the same plot with slightly different data. But it seems as though a problem exists before I include an argument in the macro. ...
0
votes
1answer
34 views

How to know the tikz working area coordinates in a beamer frame with header and footer?

In this example, slightly modified, the positionning of 'N' has been corrected with textheight to not be masked by the header: \documentclass[beamer]{beamerswitch} \usetheme{metropolis} \usepackage{...
0
votes
2answers
19 views

caption images in beamer inside column env

How do i caption these images? \begin{frame}{Einführung 2} \begin{columns} \column{0.5\textwidth} \centering \includegraphics[height=2.5cm]{FiguresAndPictures/AlleAktien-...
0
votes
2answers
41 views

How to tackle complex overlays with columns, blocs, overprints and items?

Though I had answers for mastering overlays with relative counts (cf here), I cannot manage to use it properly in complex situations with columns, blocs, overprints and items. The result is ...
2
votes
1answer
42 views

Includegraphics without stretching

I am trying to use \columns in conjunction with \includegraphics to show a "list" of pictures. Sadly this code: \begin{frame} \frametitle{Einführung} \begin{columns} \column{0.5\textwidth} ...
1
vote
1answer
31 views

Is it possible to put beamer blocks in tikz nodes?

I would like to use tikz to position beamer blocks in the frame. Here is my attempt, but it does not compile: \documentclass[beamer]{beamerswitch} \usetheme{metropolis} \usepackage{tikz} \...
1
vote
1answer
76 views

Setting a gradient fade-out effect only on the title page

I'm trying to adapt the code below so that the gradient fade-out effect appears only on the first page (title page). \documentclass[10pt,a4paper]{beamer} \usepackage{tikz} \usetikzlibrary{fadings} \...
0
votes
1answer
49 views

Is there a way to change the beamer strut and footer like the image below

\documentclass[12pt,dvipsnames,usenames,aspectratio=169]{beamer} \usetheme{default} \usebeamercolor{default} \usefonttheme{structurebold} \setbeamertemplate{navigation symbols}{} \definecolor{...
1
vote
2answers
832 views

beamer - change titlepage not to show details in headline/footline

I am using the Berlin theme to create a presentation with beamer. I like the fact that the headline and footline show the navigation, author, etc, but I would like to hide that information on the ...
3
votes
1answer
33 views

how to make columns appear one at a time

I have a table consisting of four columns. I want first two columns to appear on the first slide while the third and fourth columns should be visible on the second slide. To some extent, I achieved ...
0
votes
1answer
25 views

Signaling the last overlay in a beamer frame

Using only<.>{stuff} at the end of a beamer frame it is possible to place stuff at the very last overlay in a beamer frame. Now, I would like to slightly alter the footline when I reach the ...
1
vote
1answer
26 views

How to align two lines in Tikzcd

I am trying to align two lines either at the head or at the center and I am finding it impossible. For example, this code generates the following frame \documentclass{beamer} \usepackage[english]{...
1
vote
1answer
46 views

tableofcontents in beamer

I need to do tableofcontents ,where the was only one section on frame,other section on next frame ,but only one section at slide, like this not like this and not like this How can I do it ,help me ...
1
vote
1answer
23 views

How to choose into which column to write in beamer without overlays?

I would like to write text in a three column frame under beamer, but not in default sequence starting inside the first column, and when it is filled in the next one, and so on. Instead, I would like ...
2
votes
1answer
535 views

Beamer Frankfurt theme undefined shading error

I updated MikTex and, since then, I have an "undefined shading" error when using the Frankfurt theme. I wonder what I am doing wrong. Many thanks for your help (any fix is welcome)! Here is a minimal ...
0
votes
1answer
51 views

How do you delimit Beamer frames and blocks in LyX?

I’m a new LyX user, and I would like to make a Beamer presentation. But I don’t understand how to perform some absolutely basic functions: inserting a block in a frame that does not have one yet ...
2
votes
2answers
35 views

Specifying column height

I am using the following lines to create two columns \begin{columns} \begin{column}{0.5\textwidth} some text here some text here some text here some text here some text here \end{column} \begin{...
3
votes
4answers
1k views

How to highlight a specific section in beamer ToC?

I have a ToC with 5 sections, and I want 5 frames where there is on each one a table of contents with the ith section highlighted, and the other are shaded. What I have so far is the following : \...
0
votes
2answers
13 views

Latex Beamer: HTML Tags rendered as punctuation

Preparing a presentation, text that involves HTML tags gets rendered as Spanish question mark and exclamation mark. I am not particularly familiar with Latex Beamer and I could not figure out where ...
0
votes
0answers
12 views

Redefine fields and macros with own formatted Beamer

The post depicts a good way to speed up Beamer by creating own format. I specify the format file mybeamer.fmt before \begin{document} as %&mybeamer \begin{document} my presentation \end{...
0
votes
0answers
28 views

Mathematica code for Beamer in LaTeX

I am trying to include a Mathematica code in Beamer. I tried lstlisting and verbatim environments but I am not satisfied with the outcome. A fancy way to include Mathematica code in LaTeX has been ...
4
votes
1answer
125 views

Split slides in two with a vertical line? Equations on left and right

I'm making presentation slides for presenting my research. Basically the idea is: I need to compare two theories with each other. Therefore, I wish to split most of the slides into two halves, with ...
2
votes
1answer
34 views

Is it possible to overlay bubble diagrams clockwise?

While the answer here provided the solution to my first question (whether the bubble diagram could be overlayed at all ?), the next branching question naturally arose : Is it possible to animate the ...
2
votes
1answer
562 views

Beamer warning: large interlaced PNG might cause out of memory

I have a long Beamer presentation that gave me no errors or warnings on texlive 2013, but since I upgraded to texlive 2015, I get the following warning: large interlaced PNG might cause out of ...
0
votes
1answer
23 views

How do I cross-reference a figure between two tex documents? [duplicate]

My Professor is requiring me to write a script for my final presentation. I'm using LaTeX (because I can), and I'd like to reference my a slide from my beamer presentation within my script. Right now ...
1
vote
1answer
19 views

How to hide footnote separator in beamer animated slides?

I have a slide that have two images that are uncovered in parts. One of the figure has a caption and a footnote associated with the caption. I am able to uncover the footnote at the right instant but ...
2
votes
1answer
23 views

How to use overlays with different overprint slides including items, with automatic sequence numbers <+-> in beamer?

I am working under LyX but of course my question is also for LaTeX. I want to do this: \begin{overprint} \only<1>{ Test in slide 1 } \only<2-4>{ Test in slide 2 with items : \begin{...