Questions tagged [beamer]

{beamer} is a document class for creating presentations and slides. For general questions about presentations or slides, independent of the document class, use {presentations} tag instead.

Filter by
Sorted by
Tagged with
1 vote
1 answer
18 views

"While" in algorithm stays in the same line

I can't figure out why my "While" stays in the same line. Any help will be appreciated. Thank you! \documentclass[9pt,handout,compress,rgb]{beamer} \usepackage[T2A]{fontenc} \usepackage[utf8]...
  • 217
1 vote
1 answer
18 views

Algorithm in Beamer: all commands are in one line

I need the commands to be in separate lines (If, While, etc). I also tried to get rid of the number of the algorithm as suggested in other posts but the number is still there. Any help is appreciated! ...
  • 217
0 votes
2 answers
23 views

add header images to latex using Beamer presentation

am new to Latex and i want to add 2 images at the top of my first frame in latex presentation This the code that i add for the fancyhdr : \documentclass[14pt ,aspectratio = 169]{beamer} \usetheme{...
1 vote
1 answer
14 views

Beamer: How to reveal one section at a time in TOC in column environment [duplicate]

I have put my table of contents into two column environments for top alignment and more control over column breaks. The problem is, the pausesections and pausesubsections displays consecutive line of ...
  • 41
2 votes
1 answer
73 views

How to break a long pseudo code in Beamer in two slides

I have to write a long pseudo code in latex but one slide only takes 22 syntex. How to continue the remaining syntex in next slides. Please see my codes, I am using the extra packages for other ...
  • 21
0 votes
0 answers
18 views

How to break a long pseudo code in Beamer [duplicate]

I have to write a long pseudo code in latex but one slide only takes 22 syntex. How to continue the remaining syntex in next slides. My Thanks in advance !!
1 vote
1 answer
12 views

Removing sectionpage bullet from navigation bar - beamer-Metropolis

I want to have sectionpages (sectionpage = progressbar) in my slides. However, I don't want them to appear in the navigation bar. Is there any way to do it? Here is a MWE: \documentclass[xcolor={...
3 votes
1 answer
33 views

Beamer presentation: title on subsequent slides not taken from [] but from {}

Following e.g., this link https://tex.stackexchange.com/a/58377/114622 I found out and tested in other presentations \title[what comes on subsequent slides]{what is the title on the title slide} ...
1 vote
1 answer
51 views

Beamer: Is there an elegant way to overlay math with various environments?

I have been using the overprint environment to show one element of a math environment at a time. The problem is, I have to repeat the math for each slide. Is there a more elegant way to so this? Here ...
  • 41
2 votes
1 answer
62 views

How to set separate counters for problems and solutions in beamer?

I am using something like the following. I want to get same counter for problems and solutions eg problem 1 with solution 1. However I am getting problem 1 with solution 2 which is confusing to me. ...
  • 213
0 votes
0 answers
29 views

Fill first column in multicols in beamer frame

I would like to use multicol in a beamer frame but have the first column fill with text before the second one. It appears that \begin{multicols*}... cannot be used to achieve this effect because ...
0 votes
0 answers
28 views

Animating equations over the slide

The following code highlight an equation from the frame to be manipulated in next slides. \documentclass{beamer} \usepackage[utf8]{inputenc} \usepackage{amsmath} \usepackage{tikz} \usetikzlibrary{calc,...
0 votes
1 answer
10 views

Beamer – Slides with no subsections and \tableofcontents[hideallsubsections]

I have a problem with the following code: \documentclass{beamer} \usetheme{boxes} \AtBeginSection[] { \begin{frame}<beamer> \frametitle{Structure} \tableofcontents[currentsection] \...
  • 421
1 vote
0 answers
40 views

Graphical abstract in beamer EDITED

I have the following beamer presentation: \documentclass{beamer} \setbeamertemplate{navigation symbols}{} \begin{document} \section{First} \begin{frame}[label=A] \noindent\includegraphics[width=\...
  • 4,838
3 votes
1 answer
43 views

Use tcolorbox in beamer template for alert block in beamerarticle

I want to have boxes in the article version of my beamer slides, i.e. with beamerarticle.sty. I tried to use tcolorbox in the beamer templates. While this work well for the block environment, I get a ...
  • 508
2 votes
1 answer
61 views

Moving some graphics around the frame

I tried to animate some graphics (e.g. the letter A) from a point of the frame (e.g. the center) to another (e.g. the north-west corner). \documentclass{beamer} \usepackage[utf8]{inputenc} \usepackage{...
0 votes
3 answers
20 views

Replace items in enumerate environment

I'm trying to create a frame with an itemized list of items. I would like those items to be replaced one at a time, with different content, at each frame. Basically, the idea would be to display: At ...
3 votes
1 answer
40 views

Why is the columns environment wider than the text width?

Why does beamer's columns environment not respect the overall text width of a slide? That is why I have preferred the standard minipage to create multi-column slides with beamer for a long time. But ...
  • 51.7k
2 votes
1 answer
25 views

Beamer | Background fit frame title

I want my frame title background to fit the title, and to manually set the padding (e.g. like in CSS). In this example, this means that I want the background inside the red border to be orange, and ...
0 votes
1 answer
28 views

Adding a commutative diagram (using tikzcd) to a beamer presentation on LyX [duplicate]

I'm using the “beamer-conference-ornate-20min.lyx” template on LyX and I'd like to add a commutative diagram as follows: \[\begin{tikzcd} \ldots & {C_{p+1}} & {C_p} & {C_{p+1}} & \...
  • 103
2 votes
3 answers
30 views

Overleaf Cases: There are more than one short label

My following Beamer script in Overleaf encounters an error: Package enumitem Error: Extra short label ignored, which says that "There are more than one short label" in the included frame. ...
0 votes
1 answer
21 views

Frame numbering in different lectures (custom Beamer template)

I'm trying to define a custom template and was satisfied with a frametitle template which displays frame numbering using \insertframenumber~/~\inserttotalframenumber It worked perfectly fine until I ...
2 votes
1 answer
33 views

Atbeginsection returns missing number treated as zero

I want to add a simple AtBeginSection() in my code so that the table of contents appears before every slide, however it returns a error that ! Missing number, treated as zero. }. See the code ...
3 votes
1 answer
77 views

How can I show the items in the given code in a beamer presentation in order after each other by clicking?

I am a beginner in beamer. How can I show the items in the beamer in order by clicking after each other? More precisely, in the given code and picture, I want that first, the items in the red path ...
  • 133
1 vote
1 answer
19 views

How to left-align code in listing package?

I am working on some slides in beamer about the R language. I use the listing package to show some code. The problem is if I use the autogobble option to remove the unnecessary space, the source code ...
  • 75
0 votes
0 answers
24 views

How to make 'allowframbreaks's total continuation count' compatible with 'remove some pages from the navigation bullets'

From How to remove some pages from the navigation bullets in Beamer? and How do I insert the total continuation count in the allowframbreaks frame title?, I can solve two problems respectively: make ...
  • 1
0 votes
0 answers
30 views

beamer: vertical space between align and enumerate environment

Question: How to reduce vertical spacing only if align is followed by enumerate? I'm looking for a global solution in the preamble and specifically for the beamer class. The space below the align ...
  • 2,684
1 vote
1 answer
23 views

Removing hyperlink from navigation pane in beamer

I'm running into an issue with my beamer presentations. I'm using a presentation remote and it uses the tab key to toggle through the hyperlinks. It works great, except that the navigation pane links ...
0 votes
1 answer
30 views

Change position of title and text in a beamer titlepage

Currently I am working in a presentation and this is the code that generates my titlepage: \documentclass[10pt]{beamer} \usetheme[progressbar=frametitle]{metropolis} \usepackage{appendixnumberbeamer} ...
  • 337
1 vote
1 answer
18 views

Running author, title etc. for beamer slide using pandoc

In the beamer class, front matter commands such as author and title have optional parameters for short versions to be shown in slide headers or footers. Is there an easy way to obtain this when using ...
  • 588
0 votes
1 answer
33 views

Reference figure via asterisk in Latex Beamer

Good morning, Instead of referencing a figure using the command footnote in a caption, I'd like my figure to have no caption in order to save space. Instead, the figure shall be referenced by an ...
3 votes
3 answers
79 views

Why is the current color not applied to description items?

I am trying to make all itemization symbols and description items in the current text color. While this works for itemize and enumerate, it does not work for description. What am I missing here? \...
  • 4,858
1 vote
1 answer
24 views

beamerframe key: set font, colors, and other frame-specific styles

My objective is to assign custom styles to specific frames tagged with the [fancy] key, particularly font family, font colors, and background color. I was able to associate a background color with ...
  • 2,684
3 votes
2 answers
103 views

How to customize a Beamer numbering?

I'd like to number my section in the follwing order: Roman numbers for the sections (I, II, III...) Arabic numbers for the subsections (1, 2, 3...) How could I dot that? This is my MWE: \...
  • 1,393
2 votes
1 answer
29 views

Beamer, print different layers

I have made this beamer document. \documentclass[handout,a4]{beamer} \usepackage{handoutWithNotes} \begin{document} \begin{frame} Question ? :\\ \onslide<2- | handout :0 >{ Answer 1\\} \onslide&...
2 votes
1 answer
48 views

Hiding verbatim material on beamer slide while saving the space

The bigger picture is the following: I want to have a minted environment hidden in the presentation but save the space and have it available in my notes. So I created a command: \newcommand{\hidden}[1]...
3 votes
2 answers
49 views

Two Images on the Right Side of Text

I want two images to appear below each other on the right side of my itemized text but the code I am using pushes the images out of the slide. Kindly guide me how should I fix it? \begin{frame} \...
  • 77
0 votes
1 answer
16 views

How to hide beamer subsections from the table of contents for non highlighted sections only

This question has been asked several times but not in the same context as mine. I have a beamer presentation with an initial table of contents frame for which I hide the subsections with the following ...
  • 115
0 votes
1 answer
36 views

Parts in Table of Contents

Maybe this is a stupid question, but I am unable to implement the solution regarding parts in table of contents, given in answer https://tex.stackexchange.com/a/243530/79682: \documentclass{beamer} \...
  • 165
0 votes
1 answer
36 views

Customizing Beamersymbols

I find it tricky to click on the right beamersymbol and do not trust myself to do it during a presentation. See here for an illustration. So, I would like to reduce the number of beamer symbols, ...
0 votes
1 answer
52 views

Beamer block cream color

reading a presentation I found a block with this color combination (image attached) Can someone guide me on how to get a block with these colors?
0 votes
1 answer
76 views

Beamer Block gaussian blurred?

Currently, I have my beamer theme so that block environments are transparent. Would it be possible to have them gaussian blurred (blurring obviously the background to create an annoying Windows 7 ...
  • 359
2 votes
1 answer
40 views

Beamer: flip from slide to slide regardless of \pause when desired

Suppose I have a presentation with many \pause commands. Sometimes, I get questions that can be answered by going back a few slides. Is there a way to go back (and later forward) while ignoring the \...
1 vote
1 answer
38 views

How to make block integrated with figure

I am making a poster in a beamer using the Gemini style, and I have three figures that I want to display in a 2x2 pattern. For the fourth display (bottom-right) I want to be a block with text in it. \...
0 votes
0 answers
42 views

bad kerning in date using fontspec with beamer

I'm trying to use fontspec withbeamer. The kerning in the date on the title slide is extremely bad (the "r" and the "d" in "Stanford" are completely overlapping): Here ...
4 votes
2 answers
110 views

How to make beamer, tikzmark and tabularray compatible?

Problem Description beamer and tikzmark works correctly inside a matrix environment. But when they are used within a tblr environment, a large gap occurs. How can this be fixed? The use of ...
  • 168
4 votes
1 answer
59 views

Automatically fill vertical space for a description list in a beamer frame

I would like my description list to automatically fill the vertical space of a beamer slide. I have found solutions for this here, but it only applies to itemize and enumerate. I tried to modify the ...
  • 193
1 vote
0 answers
19 views

Beamer Class, I want to use \footfullcite (i.e. i want author (year), "In:" journal, volume, pages) to create footnote citations + biblatex ordering

MWE: \documentclass{beamer} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage[english]{babel} \usepackage{hyperref} %\UseRawInputEncoding % Cannot enable in Xelatex \usepackage{...
0 votes
1 answer
41 views

tcolorbox dispExample in Beamer

I used the @egreg's answer in beamer, but it doesn't work. How to handle it?
  • 2,431
0 votes
1 answer
20 views

How can I make font of first slide as 8pt and other slides as10pt in beamer?

I am trying to make presentation in beamer. I want my first slide in 8pt font and other slides in 10 pt fonts. But I can't make change in other slides as all slides becomes of 8 pt.