Questions tagged [beamerposter]
{beamerposter} is about creating posters using (La)TeX and the BeamerPoster package
0
votes
0answers
28 views
Beamer: passage to 16:9 aspect ratio
I have a few questions regarding the passage from the default 4:3 ratio to 16:9 one.
1) Is it necessary to use 16:9 aspect ratio for presentations?
2) What is the difference between:
\...
3
votes
1answer
46 views
Failed to properly set size of tikzpicture in beamerposter
I tried to insert a TikZ picture provided below into a beamerposter document.
It is generated by the following code (except the arrow in the middle of the "incident beam", it's an excessive detail):
...
2
votes
2answers
157 views
1 column beamerposter
I would like to use the beamerpackage to create a 1 column poster. The dimensions should be 16 inches, 14 inch box and 1 inch of white space on the right and left edges of the poster. I plan to have 3 ...
4
votes
1answer
140 views
Beamerposter and bookmarks
I am using a scheme like:
\section{<section name>}
\begin{block}{\thesection. \secname}
% content placed here
\end{block}
to achieve panels on a beamer poster. I would also ideally use
\...
1
vote
2answers
45 views
Cannot change image size, it doesn't appear in the source code
I downloaded a poster template from this link (got the .zip). While working with TeXmaker, I would like to change the logo image. As far as I see, the original logo is accessed by:
\graphicspath{{...
2
votes
0answers
275 views
How to create technical conference posters using LaTeX in 2018? [closed]
What do you use create technical posters in 2018?
I tried searching on the web and https://www.sharelatex.com/learn/Posters seems to be leaning towards tikzposter for the ease of flexibility.
I have ...
1
vote
0answers
27 views
Beamerposter problem: cannot find Runaway argument [closed]
I am trying to learn how to use beamerposter on share latex. I created a share latex file and I copied the contents of http://users.umiacs.umd.edu/~jiarong/poster/icml12-inferning/styles/...
0
votes
1answer
535 views
Can't Change Beamer Poster Size
I had made a beamer poster. Turns out I need to change its size.
Nothing I am doing is helping me. This is the exact poster I am using, https://www.overleaf.com/latex/templates/landscape-beamer-...
1
vote
1answer
102 views
Beamerposter orientation
I'm writing a poster that cannot exceed 4' to 3'. Does the default page size A0 in landscape orientation respect this dimensions ?
According to beamerposter pdf the A0 has a 2.76' x 3.90' dimensions ...
0
votes
1answer
134 views
beamerposter of size three A0
I am quite new to beamerposter, but eager to take a chance to try it. There are conferences (e.g. CVPR) that requires poster to be 3 times an A0 size. I'm wondering if there's a natural way (supported ...
1
vote
1answer
82 views
Weird symbol when combining biblatex with beamerposter
When combining biblatex with beamerposter, I get a weird symbol in place of the bibliography reference counter. Here's the minimum code I used to reproduce my issue.
MWE:
\documentclass[t]{beamer}
\...
1
vote
0answers
21 views
Beamerposter and \setmainfont incompatibility
I made a presentation using beamer. In it I can change the font. I used:
\usefonttheme{serif} % default family is serif
And then I can freely alternate fonts in any place with, for example
\...
0
votes
1answer
257 views
How to horizontally align title?
I can't get this to work. I have this:
%--------------------------------------------------------------------------------------
% TITLE SECTION
%-----------------------------------------------------...
2
votes
2answers
128 views
Starting columns in the middle of itemize environment
(How) can I start column in the middle of itemize environment? A M(N)WE:
\documentclass[final,hyperref={pdfpagelabels=false}]{beamer}
\begin{document}
\begin{frame}
\begin{block}
\begin{itemize}
\...
3
votes
2answers
182 views
Boxed and colored a two-line equation
I have the following mwe. I want to color and box only the equation except the equation number. I tried using {\color{} } and \mybox{} but they didn't work. Any help is much appreciated.
\...
0
votes
1answer
207 views
poster presentation math mode
I'm using this template for a poster presentation. In the main result block/alertblock, the math symbols do not appear in the desired size. Any help in resolving this is much appreciated.
\...
0
votes
1answer
318 views
How to add vertical space between blocks in textblock?
I am using beamerposter + textpos packages to create a scientific conference poster. I have 3 textblocks serving as columns and I place blocks inside of them. I would like to add some vertical space ...
1
vote
1answer
46 views
Can a custom beamer theme be recovered from auxiliary files?
A custom beamertheme file used to specify many of the formatting details of a beamerposter document has been deleted/removed from my system.
The large majority of files (.tex, .pdf, .aux, .txt, .bbl, ...
0
votes
1answer
159 views
Customizing Headline Results in Undefined Control Sequence
Template: http://www.nathanieljohnston.com/2009/08/latex-poster-template/
I'm trying to add an "advisor" element to my headline by copying the format used in my .sty file.
Notice that I added ...
1
vote
1answer
265 views
Explicit way to define fonts in the document
I have been trying to set up a poster using beamer. My problem is that the poster has very clear specifications: 24-point for paragraphs, 24-point for figure captions, 28-point for authors' names and ...
0
votes
1answer
813 views
How to set text height in a textblock using textpos in Beamer?
I'm using the textpos package with Beamer in order to put some text at the bottom right corner of a slide.
Despite having read the package instructions, I fail to understand how to set the text height ...
0
votes
0answers
199 views
Theorem environment in beamer poster not working correctly
I am trying to get a theorem inside an alert block to have the same background color as the alert block. I have seen other discussions of this and attempted those solutions, i.e., adding the noamsthm ...
0
votes
1answer
470 views
add annotation in beamer presentation
I have this simple beamer code.
\begin{itemize}
\item<1-> Step 1: class $<$ClassName$>$: By convention the name of a class starts with a capital letter.
\item<2-> Step 2: create a ...
1
vote
1answer
719 views
! Undefined control sequence. \reserved@b ->C:\Users l.69 \end{frame}
I'm running \documentclass{beamer} on pdfstudio in Windows 10. When I compile appears an error in many frames, and I can't find out where is the error, the error line 69 refers to:
\section{...
0
votes
1answer
124 views
adding a whole-width box in a poster template
I am using this poster template for my poster, and I would like to add a whole-width box at the bottom of the poster, but I don't seem to make it work.
As far as I understood, the whole poster is a ...
0
votes
1answer
1k views
Beamer Installation
I am new to Latex especially with beamer... Now I have been trying to compile a file as shown but I got the error of Latex error: Beamerthemesharelatex.sty not found .. I had read instruction about ...
-2
votes
1answer
208 views
Syntax movement arrows in examples in XeLaTeX in beamerposter
How to draw simple movement arrows under XeLaTeX? I must do a poster with beamerposter (which unfortunately works under XeLaTeX). Preferably compatible with linguex AND g4be.
I'm literally looking ...
0
votes
1answer
722 views
beamerposter - merge two columns at the end of the poster
I am using this template to create a poster with beamerposter. I am trying to create a two-column poster, with the references occupying both columns at the end.
Here's my try. Basically what I did ...
5
votes
1answer
511 views
cite package in a beamerposter
Is there a problem with using the cite package within a beamerposter? I'm trying to use it so that my references are ordered when I call \cite{ref1,ref2,ref3}, but I get the error:
./main.tex:333: ...
0
votes
1answer
1k views
Page orientation of a beamerposter
To change the orientation of a beamerposter the following usual code
\documentclass{beamer}
\usepackage[size=a4]{beamerposter}
\usepackage[landscape]{geometry} ...
-1
votes
0answers
70 views
problem in Jacobs Landscape Poster the top margin after title
https://www.overleaf.com/10301267dvxcxrymcfym#/38207650/.. in this the margin after the title is covering only 3/4th of the paper width. I changed the default height and widths to 48in and 60in ...
0
votes
1answer
546 views
How do I change the color of the title in a beamerposter?
I'm using the beamerposter package to make a conference poster. Specifically I'm using the quite popular template provided here:
http://www.latextemplates.com/template/jacobs-landscape-poster
How ...
4
votes
1answer
1k views
small integral symbol in poster [duplicate]
I am working on a poster in Latex. I found that the integral sign (and also the summation sign) appears to be small. What could make this happen? I never see this in a regular article. I guess it must ...
0
votes
0answers
42 views
Tab a Complete Paragraph [duplicate]
don't get mad please as I always don't share a MWE. Actually, I am working on a LaTeX file which has several themes associated to it and so it is a bit difficult to put up a MWE.
What I wanted to ...
-1
votes
1answer
152 views
Justifying text in \institute section
I am using a Beamer Poster Format. In order to justify the text, I am using \usepackage{ragged2e} and \justifying.
Beamer Poster Format has a \institute {} section immediately after the \title and \...
5
votes
1answer
312 views
Prohibit separating different fields into new lines in beamer
I am using this template (https://www.latextemplates.com/template/jacobs-landscape-poster) which is based on beamerposter to create a conference poster. The bibliography list generated automatically ...
4
votes
1answer
431 views
Fit Tikz image in Beamer poster
I am trying to fit a tikz image into a poster without success. The image itselft is correct, but when I try to import the file into the poster, writing
\begin{figure}[htbp]
%\resizebox{\...
1
vote
1answer
271 views
In beamerposter, how to have a left-aligned figure + caption on right side within a block, without having to use \frame?
Here is the best example I have so far, but it is still unsatisfactory because the caption is not RIGHT NEXT to the image, and the image is in an odd spot, when I want it to be on the left side.
Some ...
0
votes
1answer
139 views
Placing an image in Beamer Poster headline and an Inkscape pdf_tex in the body results in broken PDF
I am trying to place a PNG-Image in the headline of a beamer poster, while using a pdf_tex from Inkscape in the body. It works perfectly fine in TexStudio and the preview shows me a nice result. But ...
1
vote
1answer
843 views
Right margin/padding in Beamer columns environment is wrong
I'm trying to make a poster in Beamer. The padding for multiple-column environments is wrong: the left side of the multiple columns is correctly aligned, but the right side adds extra padding. See ...
2
votes
1answer
318 views
Problem of formatting bibliography with one beamerposter theme
I am using the beamerposter theme beamerthemeZH.sty now to generate my poster. The theme is downloaded from the project latex-beamerposter on GitHub. The theme beamerthemeZH.sty is in the direction ...
1
vote
1answer
490 views
tikz in poster with form beamer
With the template http://www.latextemplates.com/template/jacobs-landscape-poster I want to make a diagram in introduction.
I used the package 'tikz-cd' so I add this package, but then I get a error ...
1
vote
1answer
167 views
colored columns with colored titles in beamer class
I'm trying to create a 2-column poster using the beamer documentclass. Each column is to be split into several blocks and each of these blocks has its own title. The titles should have a background ...
4
votes
1answer
551 views
How can I ensure the height of a beamercolorbox without breaking the itemize layout?
I am trying to create a poster using beamerposter and I want the heights of the two boxes fixed, so that they align equally. So far I achieved that by using a minipage environment with a fixed height. ...
3
votes
2answers
459 views
Wrapfigure next to Center environment
I have this MWE:
\documentclass{beamer}
\usepackage{wrapfig}
\usepackage[orientation=portrait,size=a0,scale=1.5]{beamerposter}
\begin{document}
\begin{center}
\makebox[0.95\linewidth][c]{
...
2
votes
1answer
506 views
How to insert a footline with default beamer theme
I've inserted the \title and \author in my latex preamble to be shown in the footline at the end of my poster. When using \usepackage{beamerthemedefault} the footline won't show. How do I display this ...
2
votes
2answers
2k views
Removing the gap between two images in beamer
I am making multiple posters in beamer. The problem I am having is that on one of the posters (framed) there need to be 9 images (3 x 3) taking up the entire page. The images are inserted into one of ...
3
votes
1answer
701 views
Small Caps in beamer class - \rmfamily\scshape command doesn't work
I'm making a poster with the beamer class and want some of the text with Small Caps. I found out that the default font of the beamer class is sans serif and it does not have small capitals, but I don'...
1
vote
1answer
3k views
Changing the background color in poster template
I am making a conference poster using a template provided in this link.
http://www.latextemplates.com/template/dreuw-deselaers-poster
I want to change the background color from gray to white and
...
0
votes
1answer
361 views
Bib(la)tex error when compiling beamerposter template
Dears
I have downloaded this template http://www.latextemplates.com/template/jacobs-landscape-poster but when compiling it, the texmaker gives me the following error:
Process started
INFO - This ...
