Questions tagged [bibentry]
{bibentry} is for questions addressing issues related to bibliography entries in the main text of a document.
94
questions
0
votes
0answers
13 views
Natbib : how to cite all references by grouped by type
I am doing my CV and I use natbib for my bibliography. As a researcher, i have articles, books and proceedings.
I want to use natbib to print all the references but grouped by type :
Articles
Books
In ...
2
votes
1answer
20 views
bibentry does not work when bbl filename differs from tex filename
I have an issue with the latex package bibentry. I manually create a bbl file that I use as input at the end of my document to generate the list of references. Furthermore, I also print some ...
0
votes
1answer
23 views
How to put the whole name of an author in the Last part of a bibliography entry? [duplicate]
The point of my question is for the cases when an author is an institution, of which name should no contain any First part, as far as I'm concerned. (as in First / von / Last)
When I try with
author = ...
0
votes
0answers
10 views
Remove citation key of dinat style before full citation with \bibentry
I'm using natbib and bibentry with dinat style using the custome bst file natdin.bst.
When using \bibentry{key}, instead of printing only the full citation, it still adds the citation key before the ...
0
votes
1answer
79 views
Citation in the body of the text without references section showing up
I want to have the whole reference in the body of the text or in other words in-text citation. The solution to this problem has been given here. However, the code is set up there such that there is ...
0
votes
0answers
17 views
Paragraph ended before \citeauthoryear was complete. <to be read again>. Using bibentry with apacite package
I am writing a book with apacite package. I want to put a bibliography entry directly on the body of the document. But it show me an error when I try to show an entry from the bib file with \bibentry{}...
0
votes
1answer
30 views
Biblatex creates big linebreaks if Reference Entry fills whole line
I use biblatex to cite my references. Printing my bibliography works almost as expected. If the entry's last character (in my case a dot) is at the end of a line, a big line break occurs. So a big gap ...
0
votes
1answer
23 views
apacite doesn't show date but only n.d
The apacite packet only shows n.d. instead of the date
Document
\documentclass[a4paper, 10pt]{article}
\usepackage{apacite}
\begin{document}
\cite{IntroductionFPGAAcceleration2020}
\...
1
vote
1answer
35 views
Cited references not being printed in bibliography
I am having problems with citations that are correctly being assigned a number in my text now showing up in my bibliography. I am using biblatex with biber and texmaker as my editor.
Latex code:
\...
0
votes
0answers
42 views
resume.cls, BibTex, and “Lonely \item--perhaps a missing list environment. \bibitem{…}” Error
I am using resume.cls for making a CV and I would like to make a list of publications using BibTeX. I have already used the suggestions here (the answer by @jak123) and here (the answer by @egreg) on ...
0
votes
0answers
12 views
Changing mvbook bibliography entries in biblatex-musuos style (based off authortitle)
I need to change a bibliography entry/citation for the mvbook type. I'm using the biblatex-musuos package, which is based off authortitle.bbx/standard.bbx.
After a few punctuation changes, clearing a ...
1
vote
1answer
30 views
Remove [online] after including DOI in the references
After I included the DOI in the references the entry @article shows an [online] after the journal. I would like to remove it. Thanks in advance!
Input document
\documentclass[a4paper,12pt]{article}
\...
0
votes
1answer
51 views
\DeclareBibliographyAlias is not working
After moving to a vanilla TeXLive according to Slike's indications, I can no longer print a bibliography including only entries of a type that I have declared with \DeclareBibliographyAlias. Consider, ...
0
votes
1answer
131 views
nocite all entries of a biblatex entry type
I am writing my cv and although I only want to print some of my @unpublished and @inproceedings entries in my bibliography, I do want to print all of my @article entries.
Is there any way in which I ...
0
votes
1answer
81 views
How to do inline citations?
I have found the bibentry package but I can't get it to work:
\documentclass{memoir}
\usepackage{natbib}
\usepackage{bibentry}
\bibliographystyle{plain}
\begin{filecontents}{mybib.bib}
@book{...
4
votes
2answers
216 views
BibTeX: New entry for dictionary
The publisher of my PhD wants me to cite dictionaries in my bibliography as follows :
DCECH = Corominal, Joan/Pascual, José Antonio, Diccionario crítico etimológico castellano e histpánico, 6 vol., ...
2
votes
0answers
152 views
hyperref and bibentry problems in res class
Similar to this question: this, and this, but it did not help me.
UPDATE: I am specifically looking for the res class. However, I do not care if bibentry is used or something else.
I cannot compile ...
4
votes
2answers
5k views
What are differences amongst conference, proceedings and inproceedings?
When I go through the entry types of Bibliography I see three types mean the same thing i.e. article in a conference paper. I am really confused which of the types I should use. Could anyone clarify ...
1
vote
1answer
92 views
Entrysubtype not regarded any more
I used to use an entry subtype for article (called newspaper), to make some amendments to the bibliography, precisely, I wanted the newspaper to appear italic, if there's no author.
However, this ...
2
votes
1answer
166 views
Reference in foot note in a single line
\documentclass{beamer}
\usepackage[utf8x]{inputenc}
\usepackage[english]{babel}
\usepackage{bibentry}
\usepackage{natbib}
\usepackage{filecontents}
\usecolortheme{crane}
\nobibliography*
\...
2
votes
1answer
273 views
In-text citations appearing at the top of page when using \bibentry and \natbib (for astron citation style)
I am currently trying to type up a literature review for a class where I have to use the citation style which is relevant to my field. I would like to be able to put the citation I am talking about ...
2
votes
1answer
173 views
wrong encoding using knitr on bibentry
I'm trying to cite packages used following this code: https://stackoverflow.com/a/43888025/8146116 I change the bibentry style to latex but I get the warning:
Warning: :0-4: Some input could not ...
1
vote
1answer
2k views
BibLaTeX: How to ensure to also print “publisher” field when using @misc type?
Though I have inserted entries for publisher, it won't get printed in the bibliography sequence:
@misc{VDI3478-Sheet.2008,
author = {{VDI 3478 - Part 2}},
title = {VDI - 3478 Part 2 - ...
1
vote
2answers
2k views
Hyperref package problem
I am compiling my CV. My MWE is:
\documentclass[12pt]{article}
\usepackage{array, xcolor, bibentry, longtable}
\usepackage[margin=3cm]{geometry}
\usepackage[english]{babel}
\title{\bfseries\Huge My ...
4
votes
1answer
193 views
Are \bibentry and \subfile incompatible? [! LaTeX Error: Cannot be used in preamble.]
I am trying to construct a report document that consists of a series of documents that can also be compiled individually. In these subfile documents I have been using \bibentry{} from the bibentry ...
3
votes
2answers
646 views
Indicating joint first authorship through special markup in biblatex/biber
I am using biblatex/biber to typeset the bibliography for my thesis. For one particular reference where I am the joint first author, my PhD examiners have requested that I should expressly indicate ...
6
votes
1answer
86 views
Setting a new entrytype
Doing as it has been suggested on this site, and also having looked in the manual for biblatex.pdf, I cannot figure out the difference between DeclareDatamodeFields and DeclareDatamodeEntryfields. I ...
0
votes
1answer
862 views
Extended support for standard/norm/spec entries in bibtex/biblatex?
A couple of times when using bibtex, I would have liked to have a direct support for citing and formatting entries of standards (also specifications, directives, norms, RFCs, and the like) in my ...
0
votes
0answers
57 views
Which characters are valid for bibliography entry identifiers? [duplicate]
I'm currently writing a paper for my study on the applicability of Spring Batch (a java framework) for the use cases of the department I'm currently in.
For this, I'm citing parts of the Spring ...
0
votes
1answer
175 views
add a new field/attribute to many bibtex entries
I have a (big) bibtex database like I show below. I need to add the DOI field to every entry. This new field is just a copy of URLDOI, but without URL and "http://dx.doi.org/" (see the second piece of ...
1
vote
0answers
109 views
How can I display an inline bibentry without it being added to the bibliography?
I'm doing some corrections on my thesis at the moment, and I have to remove an accidental citation to myself in my bibliography.
I have a page at the start where I have to list publications that ...
1
vote
0answers
72 views
Find and replace text in bibentry using macros
I want to be able to display a bibliography entry but I want to highlight some part of it, specifically some author, but not all. So far I am able to create the bib entry in the middle of the text, ...
0
votes
0answers
185 views
How to avoid __markedentry being added by JabRef?
I'm managing my BibTeX files/databases with git and JabRef 3.8.2 started adding __markedentry. This requires me to pick patch sets (with `git add -i --patch) from the changes (or having the ...
4
votes
1answer
86 views
Isolated biblography entries without a biblography
I'm trying to create isolated biblography entries without an actual biblography, but they don't show up in the final compiled document at all.
MWE:
document.tex
\documentclass{article}
\usepackage{...
0
votes
0answers
253 views
Double Bibliography entry in table of contents when using bibentry
At one place in the text, I need to add a full bibliographic reference rather than just a citation (whereas in the rest of the document, I need just citations and a bibliography at the end of the ...
4
votes
1answer
478 views
How to remove the large space introduced by \nobibliography [closed]
I am using the bibentry package to list papers in my CV, but I find its "\nobibliography" cmd introduces huge unwanted space.
Use the package
\usepackage{bibentry}
Construct a bib file called "ref....
9
votes
1answer
3k views
bibentry with template causes error: lonely \item--perhaps a missing list environment
I am using this template http://www.latextemplates.com/template/cies-resume-cv to create a cv and a bib file to keep all publications etc.
I am trying to use nobibliography to be able to do this ...
3
votes
1answer
571 views
What is the meaning of __markedentry
I know this might sound like an entry level question. But can someone explain the proper usage of __markedentry? it seems to me that it is some mark up for better across device and platform management ...
3
votes
1answer
1k views
Trouble using hyperref and bibentry packages together
I am getting an error when I use hyperref and bibentry packages together. The error is:
./Test.bbl:1: LaTeX Error: Command \BR@bibitem already defined.
Or name \end... illegal, see p....
4
votes
0answers
356 views
IEEEtranbib, bibentry, hyperref - Simple example?
I am trying to make IEEEtranbib work with bibentry and hyperref, but I am stuck.
MWE
\documentclass[conference]{IEEEtran/IEEEtran}
\usepackage{bibentry}
\makeatletter\let\saved@bibitem\@bibitem\...
1
vote
1answer
295 views
Modify bibliography entries to add space-saving hyperlinks to website and local pdf file
We have worked on a research proposal and planned to submit also a flash drive with a pdf of the proposal and all our referenced papers as local copies. We asked our self, if it is possible to link ...
2
votes
1answer
1k views
Biblatex print specific bibliography entries in bold
I am using biblatex to manage some section-by-section bibliography. I need to print in some sections of my documents, specific individual bibliography entries all in bold. How can I achieve this?
...
1
vote
1answer
156 views
Cannot get bibentry to work in europecv
The title says it all. I cannot get bibentry to work in europcv. MWE below:
MWE.tex:
\documentclass[helvetica,openbib,nologo,notitle,notitle,totpages]{europecv}
\usepackage[T1]{fontenc}
\...
0
votes
0answers
902 views
Biblatex Warning: No driver for entry type 'standard' [duplicate]
In one of my papers I reference an ISO standard using the @STANDARD entry type, e.g.:
@STANDARD{GML2007,
title = {ISO 19136 (GML 3.2.1)},
organization = {International Organization for ...
3
votes
0answers
920 views
Lonely item error in bibliography .bbl file
I want to create a .bbl file with bibitems to be able to use it with bibentry package. Below is a single example how I'm doing this:
\begin{thebibliography}{1}
\bibitem{ABC} Author Name {\em Title} ...
2
votes
1answer
660 views
Removing the title field with \bibentry
I have a question. Following the advice I got from here
\begin{filecontents*}{\jobname.bib}
@article{one,
author={A. Uthor},
title={Title},
journal={Journal},
year={2010},
}
@article{two,
...
2
votes
1answer
580 views
\bibentry producing dashes for authors with custom bst
I made a custom .bst file using makebst and chose the option for producing a long dash for repeated author names in the bibliography (option nmdash,nmd-3). (I'm using bibtex with natbib and author-...
3
votes
1answer
2k views
\bibentry generating error with chicago style
I am trying to use \bibentry (with natbib) to have the full reference appear in the text, based on the example here (and others). However, this is generating an error Paragraph ended before \...
1
vote
0answers
101 views
How to abbreviate journal name with the first letters？ [closed]
I use the command "bibentry" to show the references in the slides with beamer.
And i want to get an abbreviated journal name, e.g. "Physical Review Letters" thansfors into "PRL". How can I achieve ...
2
votes
2answers
485 views
Problem in TexLive with bibentry for entries with ISBN and URL fields
(Thanks on advance for your feedback!)
I've a problem when using \bibentry for bibliographic entries that include an ISBN or URL field. My document works fine with MikTex on Win7 x64, but breaks with ...
