Questions tagged [biblatex-chem]

[biblatex-chem] is for questions related to the use of BibLaTeX by chemistry-related bibliography styles.

Filter by
Sorted by
Tagged with
0
votes
1answer
19 views

How to setup biblatex to not capitalise first author last names

I have a problem with german names with prefix in my bibliography. If the first author surname starts with a small letter, the name gets capitalised anyway. This is not a problem for the second author,...
3
votes
1answer
60 views

Why does this DOI end up on a new line when there is lots and lots of room left?

So, David's answer appeared to work for a long time, but recently I found some citations, such as the top one here, the DOI move to the next line, despite lots and lots of room left. Example: \...
2
votes
1answer
38 views

Move entire DOI to the next line rather then sticking into the margin

This builds off a previous question of mine that didn't get an answer that would work for me. I've simplified what I am asking for. When a DOI in my bibliography extends into the margin, instead of ...
1
vote
1answer
37 views

Is there a way to make page ranges non-breaking in BibLaTeX

Is there a way to prevent BibLaTeX from splitting page ranges over two lines automatically? I've noticed when editing my thesis's works cited that in a lot of cases BibLaTeX will split the page ranges ...
2
votes
1answer
43 views

How do I stop BibLaTeX from line breaking between the inital and the last name?

I've noticed BibLaTeX keeps putting linebreaks between authors initials and the last name. I would prefer these to stay together. When I do journal names I can manually specify J.~App.~Cryst. but ...
1
vote
1answer
53 views

biblatex chem-acs: Including Issue Number

I've been able to include article titles and DOIs, which are optional in ACS style, in citations using \usepackage[backend=biber,style=chem-acs,articletitle=true,doi=true]{biblatex} Is there a way to ...
1
vote
1answer
72 views

Showing title of inbook & article with chem-angew biblatex style only in bibliography and not in the footnote(cite)?

I am using the code below to achieve footnotes and footcites at the bottom of the page using the manyfoot package, biblatex and the chem-angew style. Everything that was used for the code can be ...
3
votes
1answer
74 views

Change incollection Style for chem-acs style?

I'm using style=chem-acs and keep getting the following output: Ahmed, T. In Reservoir Engineering Handbook (Fifth Edition), Ahmed, T., Ed., Fifth Edition; Gulf Professional Publishing: 2019, pp 29–...
1
vote
1answer
84 views

How to change date format for bibtex chem-acs style?

I am using biblatex with the chem-acs style, but when citing @online urldate, it is printing the date as "(accessed 02/08/2019)", yet my professor specifically wants the date for such citations to be ...
0
votes
0answers
33 views

Bibtex entries with many authors don't work in biblatex-chem? [duplicate]

I'm using the biblatex-chem bundle by @Joseph Wright. It works fine for entries in my bibliography that have three or fewer authors. But if there are four authors, instead of getting the numeric ...
1
vote
1answer
93 views

biber+biblatex+biblatex-chem: when the DOI misteriously decides not to be printed!

I've come to face with a small issue. Using Biber+Biblatex, I haven't been able to print out the DOI in the bibliography! I've used biblatex-chem and tried both chem-angew and chem-acs. From what I ...
0
votes
1answer
320 views

Combining references as one in Biblatex running bibtex as backend

Combining citations as one has been discussed earlier in the following questions, Combining-citations-at-some-instance Combine two references However, my case is a little special I guess. I using ...
0
votes
1answer
95 views

How to selectively remove punctuation between two entry fields in biblatex

I want to change the output of @thesis entry fields. Currently, I'm using the biblatex style chem-acs. Using the entry: @thesis{ABC2019, author = {LastName, A.}, school = {University of example}, ...
1
vote
1answer
635 views

Repeating Citations in footnotes and normal footnotes separated using biblatex

I want to build up my desired citation style, using biblatex with backend=biber. So I followed the advice from Audrey, Sacharja and moewe (Biblatex footcite: customizing biblatex and bibliography ...
2
votes
1answer
108 views

Changing the value of a bibliographic field

I am using Citavi to create my bib-files. The Applicant field of patents in Citavi is exported to the holder bibtex field. There are many entries in the form of "Glaxo Group, Ltd.", which Citavi ...
1
vote
1answer
71 views

Multiple related entries split into multiple paragraphs using angew-chem

This question is related to "An entry with multiple keys in the related field: is Biblatex expected to split multiple related entries into multiple paragraphs?". However, I am using the biblatex-chem ...
2
votes
1answer
80 views

Cite Last Author with Biblatex

Is it possible to cite the last authors name from a bibliographic entry in a \citeauthor{<key>} fashion? Possibly even with an altered andothers string? As an example from biblatex-examples.bib:...
2
votes
1answer
2k views

Showing Title of article with chem-angew biblatex style?

first of all: I am new to Latex so please be patient if I do not get complex answers at first. I have not yet defined my own commands and such things. Thus I would be very happy over every detailed ...
3
votes
1answer
430 views

Biblatex-Angew. Chem.; Angew. Chem. Int. Ed

I have a problem with the biblatex-chem bundle by @Joseph Wright. My problem concerns the citatation of the journal Angew. Chem. and Angew. Chem. Int. Ed. . If I use the command \cite{Name} with a ...
2
votes
1answer
2k views

Biblatex footcite: customizing biblatex and bibliography style

To built up my desired citation style (Biblatex: Footnote Citations independent of Footnotes, Citation Style) using biblatex with backend=biber, I followed moewes advice and looked for similar ...
1
vote
0answers
81 views

Biblatex: Footnote Citations independent of Footnotes, Citation Style [duplicate]

I am writing my PhD thesis and I want to achieve the following citation style (using biblatex with backend biber): Footnote citation using /footcite providing a short citation in the style of ...
1
vote
0answers
2k views

Editing .bib file to fix error [closed]

I'm a fairly new LaTex user and i'm using Biber to compile my list of references. I updated everything to get rid of the incompatible versions of biber error message. This worked for me last time, ...
2
votes
0answers
319 views

Refer to complex note-like citations

I have recently asked this question about complex note like citations: (How to achieve full compression of references with biber and add comments to grouped citations?) There, I was looking for a ...
1
vote
1answer
215 views

How to use both “et al.” and other lang. “et al.” in one bibliography? [duplicate]

I am using biblatex with custom biblatex-chem style in my paper like this: \usepackage[backend=biber,style=chem-angew,articletitle,maxbibnames=5,minbibnames=4,bibencoding=utf8]{biblatex} Also I use \...
2
votes
1answer
308 views

Blank footnotes when using chem-acs

I'm new to LaTeX and writing a chemistry thesis. I would like all of my references to be footnotes (i.e. no bibliography at the end), formatted in the ACS style. To that end, I want to use biblatex, ...
28
votes
1answer
8k views

ISO Date format with Biblatex/Biber?

I'm using biblatex/biber with the biblatex-chem package to make a list of citations for group meeting. This works quite well, but I wanted to add a recent C&EN article to it, since it is quite ...
4
votes
1answer
754 views

How to achieve full compression of references with biber and add comments to grouped citations?

I am working on a thesis, where I need to cite a lot of different papers. Following the regulations in my discipline, I need to group citations, i.e., a single number, for example (1) stands for a ...
5
votes
1answer
230 views

Retaining commas in journal titles with biblatex chem-angew style

I have a number of entries in my bibliography of type: journal = {J. Chem. Soc.{,} Perkin Trans. 1}, However the comma that follows the abbreviation dot is always stripped regardless of the ...
6
votes
2answers
2k views

How to achieve short journal names in this bibliography style using Biblatex package?

I use Zotero to get references from the web, and then export them into LaTeX using biblatex format using this workflow. I am fine with the style of bibliography and its output as shown below, but I ...
0
votes
1answer
362 views

MiKTeX 2.9, LyX 2.1, BibLaTeX: How do I suppress language after title field in references?

I am using BibLaTeX with LyX and have the following as my TeX file: %% LyX 2.1.0 created this file. For more info, see http://www.lyx.org/. %% Do not edit unless you really know what you are doing. \...
9
votes
1answer
2k views

biblatex + \mcite; add arbitrary text in references with subentries

In chemistry it's quite common to add prefixes to bibitems or even add notes to the references. See some example in literature to give you a hint what I mean. It is not created with LaTeX! I've ...
1
vote
0answers
225 views

German localisation of biblatex-chem-angew [closed]

I'm using biblatex-chem-angew with a MikTeX system like this: \usepackage[backend=bibtex,style=chem-angew]{biblatex} I want to use a German localisation, because [1] H. G. O. Becker, R. Beckert, ...
6
votes
1answer
7k views

How do I format a journal submission to Angewandte Chemie with LaTeX

Normally when my group writes journal papers we use the achemso style and package. However, we want to submit a paper to Angewandte Chemie. They don't appear to provide a LaTeX template, but will take ...
2
votes
1answer
94 views

Supress the word “References” with biblatex-chem

I'm using biblatex-chem to make a list of papers of interest for a group meeting: A MWE looks something like: \documentclass[letterpaper]{article} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc}...
5
votes
1answer
124 views

biblatex: place article title at the end

I am using biblatex and the bbx file: chem-angew.bbx from the biblatex-chem package. I want the bibliography to look just like the default, but the article title is supposed to be at the very end, ...
3
votes
1answer
185 views

Does biblatex-chem automatically format citations in captions for a particular publishers style?

I'm looking to insert a citation into the caption using biblatex and biblatex-chem. I'm trying to follow the citation style of the RSC. When making a reference in an RSC journal within a caption the ...