Questions tagged [border]
For questions related to borders of boxes, minipages, pages, and other related boundaries.
232
questions
1
vote
1
answer
68
views
Adding a Colored Frame to a Do-It-Yourself Lettrine
This question is an extension of the one posed a while back in Adding a Letter to an Image in a Do-It-Yourself Lettrine
Consider the MWE
\documentclass{book}
\usepackage{lettrine}
\usepackage{xcolor}
...
1
vote
1
answer
47
views
How to Eliminate an Unseemly Seam in a Psvectorian bi-Colored Pspicture
In the following code, I am trying to color the LHS of a psipicture blue and the RHS yellow; however, an "unseemly" seam appears down the middle of the picture.
\documentclass[12pt]{book}
\...
0
votes
0
answers
50
views
Create Page Border in LaTeX
I am trying to make a page border as shown in the figure.
Any ideas how to achieve this?
0
votes
1
answer
55
views
Drawing an HS tableau
I want to draw a tableau like this picture.
OT tableau package is not helpful in this case. Don't care about the phonetics symbols. Just write it with a,b,c and 1,2,3 the columns and rows.
0
votes
0
answers
20
views
Border Overlapping issue in Latex
I'm trying to create a MATH work sheet in which I need border for every page but when I use \Huge for some eqn (which are really small if I didn' use this code) then the equations overlap on border ...
0
votes
1
answer
33
views
fcolorbox without borders
I'm using \fcolorbox (from xcolor) to get a coloured page. However, I was wondering whether it is possible to hide/remove the border keeping the page coloured. This is the command I'm currently using ...
3
votes
3
answers
113
views
Multirow Table borders are miss aligned
I am using Overleaf to draw a Table that contained multirow cells, I am facing a problem with the right border, there are missing lines, I am using the code below, what I am missing?
\begin{table}[ht!]...
0
votes
0
answers
30
views
add text on top and bottom page border
How can I add text on the top and bottom border as seen in the image below?
1
vote
1
answer
29
views
add thin border for (image and number)
I have layout (icon and number).
Now i want to add very thin border for each (icon and number) and i used frame but don't luck.
\frame{
\begin{center}
...
0
votes
1
answer
24
views
Remove border page
how can i remove border in allpage?
Thank you
Original Code: repeat image but number don't repeat (ascending count)
\documentclass[oneside,10pt]{article}
\usepackage[a3paper,landscape,left=0.0cm,...
3
votes
2
answers
234
views
Holes in tabular borders
I don't understand why but my tab has holes on the right border, and overlaps on the left one and I don't know how to fix this.
\documentclass[a4paper, 12pt]{article}
\usepackage{multicol}
\...
2
votes
2
answers
83
views
Grey border around the whole page
I am typesetting novels in Latex and I would like to include a 'if you like this, why not try' section at the back.
Such sections are normally formatted like this:
With a nice grey border around the ...
0
votes
0
answers
22
views
How to fix: Table goes beyond page border [duplicate]
I want to make a table of small height, but it goes beyond an a4 paper size. The desired result is as in the below image
\documentclass{article}
\usepackage{array}
\usepackage{multirow, ...
1
vote
0
answers
43
views
How can you add borders to internal links whilst having urls and citation numbers coloured?
I'm using the hyperref package to colour my labels, citations and urls. Initially I had borders around the urls but I started used hypersetup because I wanted to remove the boxes and give the urls ...
1
vote
0
answers
30
views
dashed border for beamercolorbox
Is it possible to draw a beamercolorbox with a dashed border? I cannot find in the Beamer documentation the possibility of such kind of decoration.
1
vote
2
answers
39
views
beamer: uncover table by row when number of cells is not constant
The first row of the table has one cell, but the second row has 2.
\documentclass{beamer}
\RequirePackage{array}
\begin{document}
\begin{frame}
\begin{tabular}{|c|c|}
\cline{1-1}%
a \\ \cline{1-2}%
\...
1
vote
1
answer
49
views
LaTeX - Create a table from a CSV file with borders
As many of you, I wanted to automate as many things as possible when creating my files.
I have to create tables often, so I figured that loading from a CSV file would be the most comfortable for me. (...
2
votes
1
answer
47
views
Remove borders, center a pgfplot both vertically and horizontally and fill the available space
I would like to create a memory card game for my pupils and generate quadratic cards of 6cm width and height which are then embedded in a master file which puts the cards into a grid.
A single card ...
2
votes
3
answers
64
views
Remove or Change Color of a Pspicture Border
Consider the code (which compiles with XeLaTeX):
\documentclass[a5paper,12pt,onecolumn,openany,final]{book}
\usepackage[hmargin=0.7in,vmargin=0.75in]{geometry}
\usepackage[usenames,dvipsnames,svgnames,...
2
votes
1
answer
35
views
how to suppress a line segment along left-hand side edge of a tabular environment?
I do not want the extra line above the "Websites" cell, (circled in red). How do I remove this?
Here are my LaTeX commands:
\setlength{\arrayrulewidth}{0.5mm}
\setlength{\tabcolsep}{18pt}
\...
0
votes
0
answers
11
views
How make bibliographic DOIs not spill out of the margins (the right one)?
The question is: how make bibliographic DOIs not spill out of the margins (the right one)? My bibliography was not compiled directly on LaTex. I generated it in Word via Zotero. Then I copied and ...
1
vote
1
answer
70
views
Gaps in table boundaries
I am using tablesgenerator to generate tables, and the effect is not bad. But there are some flaws. For example, there is a gap at the corner of the boundary of the table.
And the border thickness ...
1
vote
0
answers
41
views
Images open perfectly fine while opening online but when they are opened with Adobe Acrobat reader the borders are missing or of different thicknesses
I am in a strange situation, I have just completed the report and downloaded but when I open it with Adobe Acrobat reader some random image borders disappear. although everything seems good when I ...
3
votes
2
answers
409
views
Is there a diagonal-striped `warning' border in LaTeX/TikZ?
I'm not sure what this type of border is called but you may have seen one before in the manual of a power tool or kitchen appliance. See this Breville product recall webpage for an example: https://...
2
votes
1
answer
31
views
Beamer, four images add thick border on two, why do images move on slide
I am new to Beamer and am trying to create a slide that has four figures, and I want to emphasize two figures with a red box.
This setup makes the four figures nicely, based on the accepted answer ...
2
votes
2
answers
100
views
How to draw a diagonal border with multiple lines?
i'm trying to draw a table with the first cell splitted by a diagonal border. But since my headings have 2 lines, the other cells also have 2 lines, and then the borders are incomplete, generating &...
1
vote
2
answers
93
views
Text inside minipage doesn't touch the border of the page
I have a heading that is made out of two minipages, one with a logo on the left and one with some text to the right. Neither of them touch the borders of the page as does the rest of the text (when ...
1
vote
1
answer
23
views
How to put vlines in all xltabular except the outer borderlines in xltabular table?
I have a very long table and I use the xltabular to do so.
the code '\begin{xltabular}{\linewidth}{*{5}{L}}is already without the|` so it should be without the horizontal line outside the table:
...
0
votes
2
answers
77
views
Excel2Latex Code Borders not correct
I use Excel2latex to generate tables, and for some reason I keep getting the wrong outside borders.
This is my code:
\begin{table}[htbp]
\centering
\caption{Add caption}
\begin{tabular}{|rcc|r|...
0
votes
0
answers
36
views
how to create a latex equation with labels, arrows and borders
I want to create an equation of this nature:
How would i add the labels above, arrows underneath and borders around?
4
votes
3
answers
290
views
Latex table goes out of the page border
\begin{table}[h]
\centering
\caption{User-Story ID: 01}
\begin{tabular}{|l|l|}
\hline
\textbf{User-Story ID:} & 01 \\
\hline
\textbf{Title:} & Physician Registration ...
1
vote
1
answer
30
views
How to avoid visual artifacts between fbox and graphics?
I'd like a simple black border around my images:
\documentclass{article}
\usepackage{graphicx}
\usepackage{calc}
\usepackage{mwe}
\setlength{\parindent}{0pt}
\setlength{\fboxsep}{0pt}
\begin{document}
...
0
votes
1
answer
42
views
Matching difficult formatting of table
I have the following table I'm trying to recreate:
I'm translating the text to English and trying to obtain a similar form, but I'm having a terrible time managing the wild world of LaTeX tables! ...
1
vote
1
answer
48
views
Is there a way to increase the length of dashes in \borderline{width}{offset}{dashed}?
Is there a way to increase the length of dashes in \tcolorbox\borderline{width}{offset}{dashed}?
Here's some base code that doesn't work
\documentclass{scrartcl}
\usepackage[most]{tcolorbox}
\begin{...
4
votes
2
answers
188
views
Dashed border only at a corner with tcolorbox
I wonder if it is possible to create a box with tcolorbox whose border is like the following (i.e. a continuous border with a dashed segment at a specific point):
The dashed part should be either at ...
1
vote
2
answers
70
views
Drawing a box around an "asymmetric" diagram/figure?
I use circuitikz a lot for circuit diagrams and many of them involve some kind of a circuit element at the bottom which makes the diagram "asymmetric" or "not a perfect rectangle" (...
1
vote
0
answers
94
views
Border around any general figure?
Is there is any general command to put a border around any "figure" (pictures, tables, tikz diagrams). In my case I have a document which uses some images and diagrams made using the ...
3
votes
3
answers
105
views
Continuous borders through multiple blocks of a blockarray
I have this rather complicated matrix I'm trying to make with the blkarray package.
\begin{figure}
\aboverulesep=0pt \belowrulesep=0pt
\center
\begin{blockarray}{cccccccccccc}
& $e_1$ &...
2
votes
1
answer
101
views
Print as many images in a row as fit the page
I have a svg image for a tile in a board game. I want to print this 3 times so that I can print the page and cut out the tiles for my game. However, I cannot figure out how to print as many tiles next ...
3
votes
0
answers
64
views
Remove white border in Frankfurt theme headline [closed]
I am using the Frankfurt theme with an aspect ratio of 16:10. Using a font size smaller than 11pt, there is a tiny white border that appears in the headline:
In the figure it is visible above "...
0
votes
1
answer
94
views
Text along all the four borders of a tcolorbox
Here is the MWE:
\documentclass[table]{standalone}
\usepackage{polyglossia, lipsum}
\usepackage[most]{tcolorbox}
\definecolor{mybrown}{HTML}{784421}
\newtcolorbox{mybox}[2][]{%
enhanced,
before ...
4
votes
3
answers
230
views
Border on table row with space between rows
I am trying to add a left border to a column in a table (tabular, longtable) but I do not want the lines to connect between cells. Rather, I want a space between the rows, like this image here:
2
votes
1
answer
116
views
No right border on rows that end in multirow?
I have a table:
\begin{tabularx}{\textwidth}{|>{\color{white}}>{\columncolor[gray]{0}}l X | X | X | X |}
\cline{1-2}
Proposal Code & \\
\hline
Short Description & ...
4
votes
2
answers
247
views
Table border error with \toprule \midrule \vspace [closed]
I have a table with mathematical formulas and I needed to use commands to increase the cell dimensions. However, this hinders the formation of an external border for the tables. How can I get flawless ...
1
vote
2
answers
98
views
Image with border and fill
I'm trying to insert an image with a rectangular border, and that rectangular border has a gray color, something like this:
This is my code:
\begin{figure}
\lineskip=-\fboxrule
\textcolor{Orange}{
...
2
votes
3
answers
285
views
Is there a way to make cloudy tcolorbox?
What I mean is when we make tcolorboxes they are in the shape of box with straight lines by using borderline command we could change how far away it is or how it looks.
For example:
\begin{tcolorbox}[...
3
votes
2
answers
159
views
Hot to draw a specific border around a QR-code?
As the treasurer of an association it's my duty to send out yearly invoices for membership dues. I use scrlttr2 on LuaLaTeX for that, and it's working fine. To allow for easier payment, I am using a ...
3
votes
2
answers
222
views
Write a line of text just on the very bottom of the pages
I wish to write a line of (small size) text at the very lower border of the page (below the footer).
Is it even possible? How?
I need it for a \documentclass[titlepage,a4paper,12pt]{article}, ~700 ...
0
votes
1
answer
208
views
table with optional border colors and text colors
I am trying to make a table that has a can have optional color for its borders and texts, similar to the following table taken from here.
I hadn't very much luck so far modifying the snippets ...
1
vote
1
answer
116
views
Table border missing when using multirow/multicolumn within tabularx
The borders of this table do not close completely when I use the \multicolumn command. Also in the last row between columns C & D, I have the same problem. I am sure there is a easy fix to this, ...