Stack Exchange Network

Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [cleveref]

{cleveref} is a package that enhances LaTeX's {cross-referencing} features, allowing the format of references to be determined automatically according to the type of reference.

30
votes
3answers
3k views

How to get more complete references

Sometimes when I work I write something like \begin{proposition} \label{my new result} ... \end{proposition} ... blah blah in Proposition \ref{my new result} blah... but then I realize that the ...
20
votes
2answers
11k views

How do I get rid of particular pdftex warning message?

Here is a minimal example that showcases my problem: \documentclass{article} \usepackage{amsthm} \usepackage{hyperref} \usepackage{cleveref} \newtheorem{thm}{Theorem} \newtheorem{lem}[thm]{Lemma} \...
66
votes
1answer
13k views

Difference between ref, varioref and cleveref. Decision for a thesis

How can one make a quick decision what the best "ref" for a thesis in pdflatex with hyperref is? After a few hours reading I do not know more than ref is used by everyone who does not know about the ...
17
votes
1answer
2k views

Cleveref with counters with same name

I am trying to use the cleveref package. I have the following counters defined (hopefully this is the right way to do it!) \newtheorem{thm}{Theorem}[section] \newtheorem{lemma}[thm]{Lemma} \...
3
votes
2answers
626 views

Refer to the “name” of an equation, while a List of Equations is generated using these names

I link two questions below because I use their solution, to number my equations and generate a list of my equations. My question about numbering equations: Number of Equation: 1, 1a, 1b Generate a ...
14
votes
3answers
2k views

Making refcheck work with cleveref

It seems that refcheck does not recognize references made by cleveref: \documentclass{article} \usepackage{amsmath} \usepackage{cleveref} \usepackage{refcheck} \begin{document} \begin{align} a &...
21
votes
1answer
24k views

Is it possible to make a reference to a subfigure to appear Figure 2(a) with cleveref?

I am new here, and also new to LaTeX, so apologies if I have included too much or too little! I have been using the subfig package, and just today added in cleveref. The subfig package labels my ...
37
votes
1answer
6k views

Impact of hyperref, when varioref and cleveref are used

I think I may have found a bug in either hyperref, cleverefoder varioref but can't determine the details any further. If do not load hyperref in the following example, the result is fine. \...
16
votes
2answers
702 views

Crossreference in Ref Range [(1a-1e) to (1a-e)]

I am just a beginner in LaTeX, I am facing a problem in Ref Range, \documentclass{article} \usepackage{amsmath,amsfonts,amssymb,cleveref} \begin{document} \ref{eq1a,eq1b,eq1c,eq1d,eq1e} \begin{...
9
votes
1answer
421 views

How to show also the name of the parent counter with cleveref?

Consider the following piece of code: \documentclass{book} \usepackage{cleveref} \usepackage{lipsum} \begin{document} \chapter{Chapter One} \section{Section One.One} \label{mysection} \...
12
votes
1answer
1k views

texlive 2016 hyperref/cleverref incompatibility

I almost always use ShareLaTeX for my LaTeX needs, but I recently began work on a relatively large document, and so I figured I would give a local TeX distribution a try to see if I could speed up the ...
6
votes
1answer
4k views

How to reference sections in other parts mentioning the part?

I have an article class document with a structure like this. Part A Section 1 Section 2 Part B Section 1 Section 2 I want to reference Section 1 in part A from Section 2 in part B. When I ...
13
votes
1answer
1k views

showonlyrefs and cleveref

This question led to a new package: autonum I know that cleveref is not compatible with showonlyrefs as it says in the cleveref manual. But I have a book-length document that depends on ...
28
votes
1answer
1k views

Relative chapter references

(A follow-up of sorts on Variable chapter references, as per @werner 's suggestion) This is somewhere in between a request for comments and an actual question (as well as a summary of my experiences ...
19
votes
4answers
2k views

Hyperref jumps to the wrong equation if the equation has a \tag and cleveref is used

The problem I'm writing a document where all of my equations are labeled, not by numbers, but by names, which I provide with amsmath's \tag command. I also use cleveref for ease of cross-referencing....
14
votes
4answers
9k views

Footnotes in Tabulars?

Is there a simple, elegant solution to add footnotes in a table (tabular)? Preferably, the solution can also support the cleveref package. EDIT: My intended effect is that, the footnotes should be ...
7
votes
1answer
2k views

Cleveref: AUCTeX and RefTeX set-up

How can I set up cleveref to work with AUCTeX and RefTeX? I have tried the advice on Emacs, RefTeX and Cleveref – can they work together? but it didn't work. Additionally, when I hit enter, \ref{} ...
21
votes
3answers
5k views

Cleveref and named theorems

Is it possible with Cleverref to reference not only the number of an environment but the "name" (the thing that is passed to it in square brackets? In the following example I want to replace the line ...
10
votes
1answer
3k views

Hyperlinking problems when using subequations, hyperref and cleveref

The problem Hi. I'm currently writing my thesis and have my equations numbered within sections. I also use subequations from amsmath. When I use amsmath, hyperref and cleveref together, however, I ...
10
votes
2answers
2k views

cleveref, autonum and labeling only referenced equations

User MMM recommended that I use the new autonum package in reply to my query. However, I am having some difficulty getting the package to work. Here is a minimal working example that compiles with "...
29
votes
1answer
5k views

cleveref and appendix packages: appendix referenced as section

Using this example: \documentclass{scrartcl} \usepackage{lipsum} \usepackage{appendix} \usepackage{cleveref} \begin{document} \section{The first section}\label{sec:1} \lipsum[2] \section{The second ...
18
votes
3answers
2k views

Emacs, RefTeX and Cleveref – can they work together?

Trying to look for an answer in the net yielded only one questions and one answer which I could neither understand nor use. On tex.stackexchange I found only this question which was answered but I'm ...
10
votes
1answer
6k views

cleveref fails to reference algorithms

In the following example document, both \autoref and plain ref will correctly link and number an algorithm reference, but cleveref fails that task. It will just insert question marks instead. In ...
6
votes
2answers
397 views

Clever references to theorem lists

I would like an automatic solution to referencing theorem environments containing lists using cleveref. In other words, if Corollary 1.2 contains parts (a) and (b), I want \cref to output “Corollary 1....
10
votes
1answer
5k views

cleveref + listings

\documentclass{scrbook} \usepackage{listings} \usepackage{cleveref} \begin{document} Ref: \ref{test}. Cref: \cref{test}. \begin{lstlisting}[caption={Test},label={test}] test \end{lstlisting} \end{...
8
votes
2answers
2k views

Splitting(!) one latex document into two pdf outputs including references

I have a quite huge thesis-latex-document with lots of references to the appendix. The whole document I would like to split into two pdf-files. That means: I would like to have the thesis and the ...
8
votes
1answer
924 views

How to reference an inequality with \cref?

I have inequalities being referenced by cref as equations. 1-) How can I change that? (and still have inequalities with the same numbering as equations) 2-) How can I change that and have ...
5
votes
3answers
563 views

References to lists in theorem-like environments/writing # symbol to files

A little warning in advance: This will be quite lenghty. I spent quite some time over the last few days trying to solve the following problem: I'm typesetting mathematical lecture notes and have used ...
5
votes
1answer
12k views

How to correctly label an included PDF?

I have this: \label{appendix:b} \includepdf[scale=0.8,pages=1,pagecommand=\chapter{interview}]{interview/interview} \includepdf[scale=0.8,pages=2-,pagecommand={}]{interview/interview} \label{appendix:...
5
votes
1answer
680 views

cleveref and amsthm — incorrect environment name

I have theorem environments that have the same theoremstyle which I define through amsthm. I want them all to share the same counter. This way, a lemma that follows theorem 1.2.6 will have the number ...
2
votes
1answer
209 views

How use cleveref to get theorem-like name and list item number?

How do I need modify this source so that: The first output line of Chapter 1, currently "See ?? 1, below", becomes instead "See Problem 2.1, below" The first output line of Chapter 2, currently "...
1
vote
1answer
174 views

How to refer to indexed words

Given a text with an indexed word, say minimum, is it possible to have a command, call it \DEX{}, that would print a later occurrence of that word and link it to the original occurrence? For an on-...
26
votes
1answer
7k views

How to reference ranges rather than separate numbers?

I would like to do the following: Just type something like ... we describe this in sections \mycoolref{winter,spring,summer,fall} ... and it will be typeset as something like ... we describe ...
14
votes
3answers
1k views

Automatically insert “in the next [chapter/section/subsection]” if reference is sequential

I'm aware of the cleveref package \cref which adds the correct reference name (see: Automatically inserting "Section", "Subsection", etc). I have a few references which refer to ...
12
votes
1answer
3k views

Referencing subequations with cleveref

I try to refer to the parent number of subequations with \cref from the cleveref package. However, I would like to change the output "eq. (...)" into "eqs. (...)" when I refer to parent numbers ...
10
votes
2answers
8k views

enumitem: referencing items in enumerate

Say we have a huge document with many sections, subsections, and subsubsections. In a few of these sections, we have enumerated environments. The package I am using is enumitem. One of the ...
20
votes
5answers
8k views

Not using abbreviations with cleveref

I’d like to use the cleveref package but I don’t like that it inserts most names as abbreviations; for instance, it will print “… fig. 2.1 …” instead of “… figure 2.1 …”. Is there a way of changing ...
11
votes
2answers
2k views

Section based linguistic example numbering with brackets

I would like to have examples in my document look like this: Section 2 (2.1) This is an example. This is a reference to example (2.1). That is: the section number appears both next to ...
10
votes
3answers
1k views

Combining cleveref and subref

I recently switched to using cleveref in my latex document. However, I have one case I still don't quite get right (or maybe it is just not covered in cleveref): I use the subfigure-environment of ...
10
votes
4answers
4k views

Adding words to links generated by hyperref

\documentclass{article} \usepackage{hyperref} \usepackage{lipsum} \usepackage{polski} \begin{document} \begin{figure} . \caption{A figure} \label{fff} \end{figure} \lipsum[1] Rysunek~\ref{fff} jest ...
6
votes
2answers
2k views

`ntheorem` and `thmtools` seem incompatible

I am preparing the setup of the theorem environments for my thesis. I want to do this right before I have say 200 of those environments in my document, since changing them will likely break things at ...
4
votes
1answer
365 views

How to cross-reference an unnumbered theorem using hyperref and cleveref

In two previous questions (i.e. Distinguishing \ref and \cref through different colors, and ''Proof of Theorem x'' header trough modification of \ref) I addressed some problems I had with hyperref ...
3
votes
1answer
152 views

Is there a way to fix the limitation of cleveref package regarding citation of subfloats?

When referencing floats using \cref commands, they may sometimes yield an incorrect typesetting. That's especially true when subfloats are included. An example is when we have float 1 with two ...
20
votes
2answers
12k views

Tex capacity exceeded sorry input stacksize=5000

I am getting this error while trying to build my tex file. As soon as I include the cleveref package, I get this error and it shows cleveref.sty with the cursor at the bolded part of the file. \def\...
12
votes
3answers
463 views

Cleveref and breqn packages don't play nice together

I have been using the breqn and cleveref packages independently, and I think they are both excellent packages; but recently I have tried using them together, but it appears that cleveref cannot ...
5
votes
1answer
187 views

Clash between ASL class file and the cleveref and cite packages

I would like to submit a paper to the Journal of Symbolic Logic, which means that I need to use the Association of Symbolic Logic's class file asl.cls and bibliography style file asl.bst, both of ...
5
votes
1answer
233 views

Cleveref does not sort self defined tags

Because I have many equations in my document and most of them do not need to be referred to, I always use \begin{align*}...\end{align*}. For the times I do need an equation number I have written a ...
5
votes
2answers
225 views

Different output of \ref and \cref in lists with enumitem+cleveref

I'm using enumitem and cleveref packages and I would like to enforce a different behaviour of \ref and \cref for {enumerate} lists. More precisely, whenever I have lists in a theorem environment I ...
4
votes
1answer
298 views

Cleveref interaction with theorem subnumbering

I have included sub-numbered theorems according to the suggestion for this question: How do I get sub-numbering for theorems (Theorem 1.A., Theorem 1.B., Theorem 2.)? This works great, and it ...
3
votes
1answer
596 views

Cross-ref an equation using RefTeX, AUCTeX and cleveref

After an updated of AUCTeX (to 11.87) the solution that worked wonderful from this answer stopped working. In particular, I got the following error: reftex-reference: Wrong number of arguments: (...