Questions tagged [ctex]
The ctex tag has no usage guidance.
45
questions
0
votes
0
answers
57
views
Getting wrong math formula with CTEX?
When I use \usepackage[UTF8]{ctex} and input the formula like this:
\begin{equation}
y = \frac{\gamma}{\sqrt{Var[x] + \varepsilon } } \cdot x + (\beta - \frac{\gamma E[x]}{\sqrt{Var[x] + \varepsilon }...
0
votes
0
answers
30
views
I am using "ctexrep.cls" package. But I am facing a problem that my chapter title and chapter number present in different line
I am using "ctexrep.cls" package. But i am facing a problem that my chapter title and chapter number are present in a different lines. The question I ask before in which someone suggests me ...
0
votes
0
answers
192
views
package fontspec errors: the font "FandolSong-Regular"cannot be found when trying to use a latex template
I am trying to use Latex to write my resume. In order to do that, I downloaded a template from here.
Since I would like to write a Chinese resume, usually what I do is I add
\usepackage{ctex}
before ...
1
vote
1
answer
41
views
How to avoid the vertical spacing dispersion in the whole document?
I found that LaTeX automatically disperses the spacing in the vertical direction, which is similar to the vertical version of Justify or Distributed in word. This will lead to a problem, that is, ...
0
votes
1
answer
78
views
The connector between multiple authors
Now I need to cite Chinese and English literature meanwhile in one document. However, I can not use the proper connector between two authors according to different languages. I need to use a connector ...
4
votes
1
answer
219
views
LuaLaTeX: ctex and microtype together produce errors when using "\scshape"
Consider the following MWE, to compile with LuaLaTeX:
%! TEX program = lualatex
\documentclass{article}
\RequirePackage[fontset=fandol]{ctex}
\usepackage{microtype}
\begin{document}
{\scshape Some ...
0
votes
1
answer
105
views
LaTeX suddenly fails to compile
'''
Command \iint already defined. ...d{\iint}{\DOTSI\protect\MultiIntegral{2}}
'''
The main errors are asamath.sty, ctex.sty, ctexbook.sty
enter link description here
Since I am using Chinese, there ...
0
votes
0
answers
29
views
Bug in recent update for ctex package? [duplicate]
\documentclass[12pt, UTF8]{ctexart}
%\documentclass[12pt, UTF8, scheme = plain]{ctexart}
%\documentclass[12pt, UTF8]{article}
\begin{document}
This is \textit{a test}.
\end{document}
\textit{} ...
2
votes
1
answer
295
views
Cannot install ctex via tlmgr: "Unknown option: status-file" when running fmtutil-sys
I am trying to install ctex through tlmgr. However, it fails. (For other packages, it works fine, so I guess it is not a general error.)
Here is the command I run:
tlmgr update --self && tlmgr ...
2
votes
1
answer
268
views
Redefining CJKfamily warning
\documentclass[presentation]{beamer}
\usetheme{CambridgeUS}
\usepackage{ctex}
\setCJKmainfont{SimSun}
\setCJKsansfont{Noto Sans CJK SC}
\setCJKmonofont{Noto Sans Mono CJK SC}
\begin{frame}{Frame ...
4
votes
1
answer
68
views
The use of polyglossia changes Chinese font selection
I just switched from babel to polyglossia, and surprisingly found my san-serif Chinese font changes. Consider the following example:
%! TEX program = xelatex
\documentclass{article}
\RequirePackage{...
5
votes
1
answer
80
views
polyglossia and \selectlanguage in the preamble causing Chinese characters disappear
Consider the following example (compile with xelatex):
%! TEX program = xelatex
\documentclass{article}
\usepackage{ctex}
\RequirePackage{polyglossia}
\setdefaultlanguage{english}
\setotherlanguage[...
1
vote
1
answer
144
views
"Improper alphabetic constant" error when input standalone subfile
Upgrade to TexLive2020 recently, and get "Improper alphabetic constant" error when \input a subfile with the standalone pkg. There's no problem if the subfile contents are directly put in ...
2
votes
2
answers
220
views
Some Chinese characters can no show using ctex
I use overleaf to edit my CV, but I find a character "珅" in Chinese cannot be shown in the compiled PDF. I also try XeCJK, but it doesn't work too.
Here is my code:
\documentclass[a4paper]{...
0
votes
0
answers
39
views
How to define a space command to be invisible between two Chinese chars but visible between a Chinese char and an alphabet char?
I would like to define a command which stands for a whitespace between a Chinese char and an alphabet char, such that
it produces a whitespace when placed between a Chinese (CJK) char and an alphabet ...
0
votes
1
answer
820
views
Bold chinese characters with ctex
I am doing some document with Chinese characters and package ctex
\usepackage[UTF8]{ctex}
However, as soon as I try to typeset something in bold, say
\begin{tikzpicture}
\node at (0,0) {\textbf{固态}};
...
0
votes
0
answers
236
views
Undefined control sequence. \ctex_gadd_hook:Nn
I am writing my Thesis and facing this problem. I am using MikTex with Texstudio. Tried to resolve the issue but failed to find the solution. I need your help.
Here is the error
! Undefined control ...
0
votes
0
answers
57
views
My latex file is missing
I do not know whether it is proper to ask a technical question here. It made me frustrated.
When I was writting the latex, something is wrong and it had no response. I restart the computure, the ...
1
vote
0
answers
206
views
CTeX recent update causing problem: \ctex_gadd_hook:Nn \CJKhook { \ctex_set_ignorespaces: }
It was fine by 17th Sep and the file would compile using PDFLaTeX to produce PDF.
\documentclass[12pt, a4paper]{ctexrep}
\usepackage{amsmath}
\usepackage{adjustbox} % uses graphicx
\usepackage[top=1....
2
votes
4
answers
488
views
How to create a node with a vertical Chinese text
I want to create a node with Chinese text written in vertical direction. Of course, I don't want the characters to be rotated! Is that possible?
MWE:
\documentclass[tikz]{standalone}
\usepackage[...
5
votes
1
answer
186
views
Using 'ctex' and 'translations' packages together
I have numerous documents in English which will be translated into Chinese. I use ctex package for Chinese typesetting and XeLaTeX for compiling. There are some strings repeating throughout the ...
0
votes
1
answer
109
views
ctex will not automatically new a paragraph using a blank line
I have two computers installed ctex package while the versions are different. The versions are 2.5.2 and 2.4.16. The MWE.tex saved as GBK encoding, is shown as follows.
\documentclass[GBK]{ctexbook}
\...
0
votes
0
answers
55
views
Vertical space introduced by ctex?
I have to use ctex package for typing Chinese, but it comes annoying extra space between section and equations. I tried many commands but cannot remove this space.
\documentclass[a4paper,oneside,12pt]...
0
votes
2
answers
435
views
how to set ctex font size to \lishu
log file I probably should spend more time getting to read the documentation but I must admit it is too advanced and I have a hard time comprehending what its tring to say.I am on a deadline and need ...
6
votes
3
answers
6k
views
critical package ctex error:ctex fontset"fandol" is unavailable in current
I am trying to use some Chinese characters in my Latex document(But it is not entirely in Chinese) and this is the website that I came across. According to the author, all I need is to use ctex ...
0
votes
0
answers
78
views
ctex package installation error
I just installed ctex today, and used \usepackage{ctex}, only to get these errors:
Package ctex Error: Support package `fontspec' too old. ... { ctex } { package-too-old } { fontspec } }
Package ...
1
vote
1
answer
160
views
How to eliminate the space after chemical formula in mhchem enviornment
It's very convenient to use mhchem to typeset chemical formulas. It works very good in English writing, but when using Chinese (ctex), every chemical formula is followed by a space, which makes the ...
1
vote
1
answer
463
views
It is possible to use ctex in MikTeX/TeXworks?
I have been using MikTeX/TeXworks for a while and have really enjoyed its universality and facility. I usually compile laTeX documents with XeLaTeX or pdfLaTeX. However, I was not able to input ...
1
vote
1
answer
500
views
How to solve the following errors in notag equation with the "amsmath" used? [closed]
Coding:
\documentclass{article}
\usepackage{ctex} % used for Chinese
\usepackage{amsmath} % equation*
\begin{document}
直角三角形有如下性质:
\begin{equation*} % for notag equation
a^2 ...
4
votes
1
answer
172
views
How do I make Chinese character string to have the same length by filling blanks?
I am trying to write a document for several people to sign, their names have different numbers of characters. I would like to make them to have the same length by filling blank spaces to them. For ...
1
vote
1
answer
109
views
Missing characters in ctex
When using ctex combined with xeLatex, I found there are some missing characters in ctex, so I wonder how to solve this issue ?
For example, character 祂.
\documentclass[a4paper, 11pt]{article}
\...
1
vote
0
answers
44
views
CTEX renders the underscore too long [duplicate]
When using the ctex package, it seems that a single underscore (\_) will be rendered the length of two underscores. However in the rendered PDF there's nothing wrong with the text itself (meaning you ...
1
vote
1
answer
207
views
"LaTeX Error: Not in outer par mode." When Rotating a Table
I wanted to rotate my table using sidewaystable in LaTeX, but it turned out to be wrong with the error message LaTeX Error: Not in outer par mode., whose location is marked with %'s below.
% !TEX ...
1
vote
1
answer
61
views
How to select a cascading set of fonts
I am writing a LaTeX document about Chinese characters decomposition. As such I need many weird and unusual characters.
I have installed several fonts to cover all the CJK set and in my system all ...
4
votes
0
answers
235
views
What are the problems for CTeX in pdfLaTeX?
While I do not produce documents in Chinese, I quote enough Chinese to be very happy that CTeX exists. I have used CJKutf8. Now simple examples in CTeX work fine for me using pdfLaTeX. The CTeX ...
0
votes
1
answer
169
views
How to use \addCJKfontfeatures?
The ctex bundle provides Mapping = fullwidth-stop to convert ordinary Chinese periods (。) to fullwidth periods (.). (Not to be confused with halfwidth periods (.).)
However, this only works for one ...
1
vote
0
answers
172
views
The vertical spacing before the title of TOC is inconsistent with the normal section title
I use the tocloft package to customize the format of TOC and the ctex package to support Chinese typesetting and to customize the section title format. Everything works well. But I find that the ...
3
votes
1
answer
514
views
How do I select a Chinese font for caption label?
I am writing a document in Chinese and would like to choose a font for the caption label, different from that is used in the main text. I know it is tricky to work with Chinese font in LaTeX, but I ...
5
votes
1
answer
558
views
Will \usepackage[UTF8]{ctex} change the appearance of my non-Chinese part LaTeX document?
I'm very new with LaTeX. I'm using it to write a document and 70% of the content is English and left is Chinese.
After some research I found just by adding \usepackage[UTF8]{ctex} in the document, I ...
1
vote
0
answers
92
views
Packages option breakall not compatible with ctex
I am having this weird issue where the option breakall of package truncate is not compatible with package ctex. Below is the code
\documentclass[UTF8]{article}
\usepackage{lipsum}
\usepackage[UTF8]{...
3
votes
0
answers
703
views
\maketitle undefined control sequence{with ctex} [closed]
I want to type Chinese in my report but I have some problem with my code. Once I add \usepackage[UTF8]{ctex} in the file the compiler will complain with the message undefined control sequence \...
5
votes
2
answers
663
views
How to properly scale up fonts from newtxtext and mtpro2?
Motivation
For my CJK documents, I’m mixing TeX Gyre Termes (a Times clone) with Source Han Serif and TeX Gyre Heros (a Helvetica clone) with Source Han Sans. I’m also using the MathTime Professional ...
3
votes
0
answers
376
views
Customizing line spacing in ctex classes
My goal
I recently started using the ctex classes to convert some of my English articles into Chinese. Regarding the line spacing, I would like to achieve the following:
The body text should have a ...
3
votes
1
answer
4k
views
Chinese on MacTex2018, simple example
I just installed MacTex2018 (because I was having trouble with TexLive2016).
My issue is related to chinese chars. May I ask for a simple example?
In the end I would like to have just some chinese ...
0
votes
0
answers
69
views
ctex and fontenc mess up the siunitx package
I am working on an article in Chinese, and I find that ctex and fontenc are interfering with the siunitx package when the detect-all switch is on. A MWE is as follows
%!TEX program = xelatex
\...