Questions tagged [cv]

For questions about how to write a curriculum vitae with LaTeX and friends.

Filter by
Sorted by
Tagged with
0
votes
0answers
20 views

How to place a photo to specific co-ordinates of a document?

I am trying to add a portrait onto my CV. However, I want it in an exact position and overlaying the current formatting. Is it possible to add the photo to a specific position and overlay whatever is ...
0
votes
0answers
24 views

ALTACV: how do I change fontsize?

i'm writing a cv on overleaf.com. The name is AltaCV Template. I know that that file altacv.cls is the right one to change the fontsize, but I don't know how to do it. Thank you in advance!
0
votes
0answers
35 views

Header overlaping

I'm trying to type in a CV using LaTeX. I'm sorry I hardly understand how LaTeX works. I got basic sense on programming tho, and all LaTeX i know is by getting templates and editing them. When typing ...
1
vote
0answers
36 views

Increasing spaces between sections

I would like to improve the spacing between sections of this column, but entering \ newline is not working Curriculo.tex %-----------------------------------------------------------------------------...
0
votes
1answer
16 views

Centering section title in new environment

``I have defined a new environment for the sections for a CV template. I'm not sure how to center the section title in this code. Could someone help me, please? \newenvironment{rSection}[1] { % 1 ...
1
vote
0answers
41 views

EDITED:Command \item working differently than before in environment [CV] (using package CV) in MikTex 2.9 [on hold]

Have used LaTex and package CV for the last 5+ years to write my CV. Using the same code that has worked many times before on a new install (MikTex 2.9) I receive error messages for each time I use \...
0
votes
0answers
31 views

ClassicThesis-Styled CV: adding a picture [on hold]

I'm using the following template and I'd like to add a picture on the rigth of the section personal information. I'd like to create something like this: where the red lines are the references for ...
0
votes
0answers
27 views

Resume/CV using LATEX [duplicate]

I want to prepare my CV using LATEX. Please provide some sample (latex source) so that I could see how does that actually render as PDF after compiling. Also, share some references for the packages/...
3
votes
1answer
72 views

Protruding line over another column

I am creating a Brazilian adaptation of the code on this page. When compiling, an error arises, one row extends over the other column, but I don't know what to do ... Where should I make the ...
0
votes
0answers
36 views

An error while creating resume using Latex (WinEdt editor) [on hold]

I am trying to make a resume using Latex (WinEdt editor). While compiling the tex file I am getting the following error. Kindly help me. Where I am doing it wrong? Tex code: \documentclass[margin,...
0
votes
1answer
27 views

`resume.cls` class template. How to move the headline (name, address, phone, mail)?

Please consider this resume template: https://da.overleaf.com/articles/rishi-shahs-resume/vgxvkmxktyxn. I want to keep this template but simply make two changes: Move the headline (name, address, ...
1
vote
1answer
38 views

Decreasing vertical space before start of itemize in Resume.cls

I am using the resume.cls from this template: https://www.overleaf.com/articles/sharanya-anands-cv/fyvvdpdxthyc I want to decrease the vertical spacing before the start of each list, but have ...
1
vote
1answer
47 views

Custom Icons on fortysecondcv

I am trying to build a CV, with the fortysecondcv (right now it is taken way more than 40 seconds though). When adding items to the sidebar, it uses the fontawesome package and a syntax like this, ...
1
vote
1answer
40 views

Why is the numbering in this reverse-chron BibTeX listing incorrect?

In 2014 I wrote a CV that used the following template for citations. The idea was to download a publication list from google scholar, "google.bib" and then reverse sort by year and category. Then ...
2
votes
1answer
41 views

Putting the links and email in left/right corners

How can I place the link in the left and the email in the right corner of the resume LinkedIn : https://www.linkedin.com/in/abc-934894159/ email: XXX@gmail.com I did this \documentclass[margin]{...
2
votes
1answer
69 views

Changing icons in Moderncv{Casual} Coverletter template

I am using the Modercv{Casual} template for my cover letter but want to change the icons of mobile phone, email, web address, github and linkedIn in my footer to the "Font Awesome" type to make it ...
0
votes
1answer
30 views

Preventing pagebreak within \newenvironment

I downloaded a latex template for a CV here https://www.latextemplates.com/template/medium-length-professional-cv in the cls file it defines a newenvironment rSection that is then used for each ...
1
vote
0answers
71 views

Fitting resume content on one page [closed]

So I am new to latex and am pretty lost. Hoping one of you guys could help me out. So I wrote my resume on latex and its almost 2 pages long. I am really tryna fit it all on one page. So I tried ...
0
votes
2answers
27 views

Shifting and aligning text with a picture in a CV heading

I am trying to adjust the heading portion of this particular CV template according to the picture with arrows for an alignment with dashed lines as well as adding another properly aligned column for ...
2
votes
1answer
43 views

Change font from all-lowercase to regular size on CV

This is the top 1/3 of my prelim resume (still in the works) ^^^ I want to change my header fonts such as "education", "experience", "bachelor of science", "stony brook university honors college", ...
1
vote
1answer
40 views

Changing section font in a res document

I'm using res.cls to write a CV. I'd like to unbold the section title and use the italic font (as the picture below). \documentclass[margin]{res} \setlength{\textwidth}{5.1in} % set width of text ...
1
vote
1answer
57 views

Fix header formatting on resume

I want to reformat the header of my resume such that my email, github and phone number are stacked on top of one another on the right, and not overlapping. File cv.tex: \documentclass[...
1
vote
1answer
131 views

LaTeX CV- Deedy Resume: How to compile and get pdf for Deedy Resume MacFonts?

So I wanted to use the MacFonts version of Deedy Resume, I can't find any option to do that on Overleaf , however I tried and installed TeXstudio to do so, Since being a rookie, I am having hard time ...
0
votes
0answers
41 views

Modifying xelatex CV template

Does anyone knows the following: I wrote my curriculum vitae to the Freeman Curriculum Vitae template found in https://www.latextemplates.com/cat/curricula-vitae . My CV looks beautiful but it has a ...
0
votes
1answer
20 views

Create a tex section in cv template keeping the layout of a custom command

I am using this template for my CV by Scott Clark. As explained here I substituted tabular* with tabularx to make it compile. In the template he has defined the command resheading to identify ...
0
votes
1answer
50 views

How can I pass an argument to a command defined and called in a .cls file using another command called in a .tex and defined in the previous .cls?

I am building a résumé on which I would like to list the languages I speak and my level in each one of them. To present the levels, I wish to use skill dots. I want to obtain a structure similar to ...
1
vote
1answer
29 views

How to remove comma in moderncv in the education section

I am trying to remove the comma in the education section after the degree. How can I achieve this? \section{Education} \cventry{Jan 2013--Dec 2018}{Bachelor's of Science in Information Systems}{...
2
votes
1answer
55 views

Need help with the moderncv resume/cover letter template

I need help with this great template. It has both the resume and cover letter in one document but I'd like to make a few changes. I'd like to add "job title" above summary and below email/phone in ...
2
votes
1answer
73 views

Two lines in two columns are not aligned

Honestly, I'm trying to edit a CV template to fit my need. I could not figure out how to make the line "Department ..." aligned with "CONTACT". Please help me solve this problem! Thank you so much! %...
2
votes
1answer
50 views

How to change circle bullet to square bullet and remove indent before the bullet?

I'm trying to edit this LaTex template, which I downloaded from https://www.overleaf.com, into my desired CV. Here is its code: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%...
2
votes
1answer
70 views

How to move name, address, phone, email to the middle and add a headline below it?

I am trying to create my cover letter with class moderncv but I don't quite know how to move the name, address, phone, email to the top center of the page. I would like to make it look like the one in ...
2
votes
1answer
71 views

I'm trying to add a headline below name in this template but can't figure out how to add it

How do I add the headline "Business Analyst, Data Analyst, Project Management, Information Systems" below the name? \ProvidesClass{resume}[2010/07/10 v0.9 Resume class] \LoadClass[11pt,letterpaper]{...
2
votes
1answer
69 views

How to make an environment like itemize to break when it reaches the end of the page?

I am currently using the Smart Twenty Seconds CV for creating my CV: The template has a sidebar on the left and text area on the Right. It uses some Kind of an own created environment which hold \...
1
vote
1answer
79 views

How to centre information on Cover Letter

I removed the profile picture from the Cover Letter of class awesome-cv, and I want my name and personal information to be centred, as it is in the CV template. How do I do that?
0
votes
0answers
35 views

Make use of a CV template, one section cannot be split over 2 pages when list is getting too long [duplicate]

I currently make use of this CV template with the Name "Twenty Seconds Resume/CV" The author created a new list Environment, however when my actual list is getting too long Latex does not make a page ...
1
vote
0answers
95 views

Change photo position in altacv [duplicate]

I am currently compiling my CV using the altacv class and want to make a layout change in the class file. Currently my personal information is on the left and the photo to the right. How can I make ...
1
vote
1answer
70 views

Adding medium profile in profile section

I want to add my medium profile in the personal section in my resume. Given that this is my first time using TeX, is there any way to do this. As font awesome is supported, so I added these lines: \...
1
vote
1answer
74 views

Moderncvhead and moderncvbodyi warnings - ModernCV

I did my CV by using Texmaker on a PC; when I open the file on another PC it does not work, in particular the software gives me the following messages (I downloaded and updated MikTek as well): %-----...
1
vote
2answers
58 views

Add image in Two - Column CV

Please find the format of two-column CV in https://www.sharelatex.com/templates/cv-or-resume/two-column-cv I wish to add my photograph within the yellow box. But when I am adding it, the yellow ...
1
vote
1answer
60 views

Right alignment of subchap and item list different

I'm creating my CV in Overleaf (copied a template) and have a long list of items to include, with dates aligned to the right. For some things like my qualifications I have listed them using the \...
0
votes
0answers
71 views

Can anyone help me find a latex template for this CV

Came across this unique clean design, I guess this is in Photoshop. can anyone help me finding a latex template for this resume? if not can anyone help me with the code for the bullet points and the ...
-1
votes
1answer
62 views

How to reduce whitespace on Twenty Seconds Resume

I'm just curious if there is any way to reduce the amount of white space between the gray rectangular section (drawn using tikz) and the text to the right in the Twenty Seconds Resume format found ...
3
votes
1answer
116 views

Is The Word \LaTeX Professional

When you compile \LaTeX it comes out it in its own format, the logo, which is very unique. I'm wondering if that particular format is professional? Would you use it on resumes, company documents, ...
2
votes
2answers
375 views

Github icon in latex [duplicate]

I have resume template on overleaf. Now I want to add github logo on that after linkdein logo. How can I do that? https://www.overleaf.com/articles/aditya-gadepallis-resume/kzdksnkdcrsr How I want ...
3
votes
2answers
372 views

LaTex CV- Deedy Resume: How to change the Color of Name and the Subsections?

How can I change the colour of the First part in the name section, here it is Debarghya and the first section of experience like google, facebookI tried a lot but I can't find any solution. I just ...
1
vote
1answer
42 views

Wrap Text in Table / Text Extends Past Page Margins

I would like to know who to wrap text in a table, and also to keep text from off the page of the document. Below is the code I have written so far. I am trying to wrap the text under 'Relevant ...
0
votes
0answers
26 views

Indentation and bullet points

I'm using this template https://www.overleaf.com/latex/templates/simple-resume/gtrrjrsrfkvk And under education, I'm trying to remove the indentation of Relevant Coursework's (2nd line). I would ...
1
vote
2answers
188 views

insert the picture on the left

Good night I want just to get the picture to be displayed on the left side and so My name right next to it and about the personal info is it advisable to make them get aligned and come from the ...
2
votes
1answer
81 views

Year alignment in \cvhonor

I'm using a derivation of the awesome-cv template to create a CV. When using \cvhonor. the template shows something like this: However, I currently have a situation where I got the same award over ...
2
votes
1answer
52 views

Line on the same height on CV with multicols

I am trying to wrap up my CV but the problem I am facing is with two lines not being on the same level. My code is below: \begin{multicols}{2}{} \begin{rSection}{|Computer Skills|} \begin{itemize} ...