Skip to main content

Questions tagged [els-cas]

{els-cas} is for questions about Elsevier's new document classes "cas-sc" and "cas-dc". Questions about the "elsarticle" document class should use the {elsarticle} tag instead.

Filter by
Sorted by
Tagged with
1 vote
1 answer
65 views

Can't double the line space of abstract in cas-sc formatted latex for elseiver

I have trouble in using the cas-sc LaTeX template when my manuscript was sent back. The editor replied: Type the whole manuscript with double line spacing. I referenced Campa's answer and added \...
dhbfrund's user avatar
1 vote
1 answer
73 views

Elsevier cas-sc document class: cannot print citation call-outs bounded by square brackets [duplicate]

cas-sc class and bibliographystyle {elsarticle-num}. when i run this i get citation call-outs bounded by ( ) instead of [ ]. \documentclass[a4paper,fleqn]{cas-sc} \usepackage{natbib} \usepackage{...
Jawad Ahmad's user avatar
2 votes
2 answers
229 views

! LaTeX Error: Control sequence \sep: already defined

I need merging several research papers compiled using CAS-DC Elsevier template in single .pdf file with bibliography in each research paper and consecutive page numbering across the whole .pdf ...
Andriy Bublikov's user avatar
0 votes
2 answers
248 views

How to force my table to appear under its sections title

My tables in the appendix are appearing above the title, like this: How can I keep the title above all tables? Here is my code \clearpage \appendix \begin{appendices} \chapter{Appendix} \section{...
asmgx's user avatar
  • 437
0 votes
0 answers
93 views

CAS class does not generate PDF. Gives error undefine control sequence?

\documentclass[a4paper,fleqn]{cas-sc} \usepackage{booktabs,siunitx} \sisetup{detect-all} \usepackage{hyperref} %\usepackage{cite} \usepackage{amsmath} \usepackage{amssymb,amsthm} %\usepackage[numbers]{...
Ghulam Hafeez's user avatar
0 votes
1 answer
110 views

Elsevier cas-dc problem: minipage and "LaTeX Error: Command \bibsep already defined"

In this question ( see Old question ) you talked about how to line up two figures with minipage in Elsevier cas-dc class. I had the same problem. I tried adding this patch, and now the code works ...
Elisa's user avatar
  • 3
0 votes
0 answers
82 views

Incompatibility cas-sc with hyperref and enumitem?

In another question I asked about a potential incompatibility between enumitem and hyperref appearing when using inline enumerations in captions of figures that are then referenced. The correct answer ...
Ronnie Marksch's user avatar
1 vote
0 answers
161 views

Add [dataset] identifier before the reference to identify it as a data reference in Bibtex

I'm writing a journal paper which requires datasets to be listed in the format of : "[dataset] [6] M. Oguro, S. Imahiro, S. Saito, T. Nakashizuka, Mortality data for Japanese oak wilt disease and ...
ARa's user avatar
  • 11
0 votes
0 answers
600 views

Error when using the els-cas template in Texmaker

I'm quite new to the els-cas-dc template in LaTeX. I want to submit a paper to Elsevier, thus I downloaded the "els-cas-templates" package. Specifically, my paper is a two column paper so I'...
Felix Larry Essilfie's user avatar
1 vote
2 answers
455 views

Author name hyphen(-) not recognized in Elsevier's CAS Latex template

I'm using Elsevier's CAS Latex Double-Column Template LaTeX package. (https://ko.overleaf.com/latex/templates/elseviers-cas-latex-double-column-template/hhzpymgjmxfk) There was a problem that I couldn'...
ParkShinRn's user avatar
0 votes
2 answers
554 views

PdfLaTex: Equation Problem When Using Elsevier Template

I'm trying to use the Elsevier template from https://www.ctan.org/tex-archive/macros/latex/contrib/els-cas-templates, but I meet a problem when I try to crossref an equation, the results become Eq. (1)...
Tim's user avatar
  • 111
0 votes
0 answers
107 views

MiKTeX complier driver did not succeed

I have the following tex: \documentclass[a4paper,fleqn]{cas-dc} \usepackage[authoryear,longnamesfirst]{natbib} \begin{document} \title[mode = title]{Leveraging social media news to predict ...
Dario's user avatar
  • 1,340
1 vote
1 answer
855 views

PdfLaTex: Author List Problem When Using Elsevier Template

I'm trying to use the Elsevier template from https://www.ctan.org/tex-archive/macros/latex/contrib/els-cas-templates, but I meet a problem when I try to include more than two authors, the results ...
Tim's user avatar
  • 111
0 votes
0 answers
494 views

Elsevier cas-sc document class doesn't work properly with XeLatex

I'm using \documentclass[a4paper,fleqn]{cas-dc} and I have Arabic text in my article, when I try to execute using XeLatex, it returns this error and displays weired characters in the pdf output. /usr/...
user2804064's user avatar
1 vote
1 answer
476 views

Number of Pages for Appendix in Elsevier Template

I met a problem when using the Elsevier template downloaded here: https://www.ctan.org/pkg/els-cas-templates/ When I try to add an Appendix, the number of pages will exceed its limitation, for ...
Tim's user avatar
  • 111
1 vote
1 answer
577 views

How to line up two images with different titles side by side in Elsevier cas-dc class?

I am using elsevier's template - cas-dc, and I would like to have two images with different titles side by side in a double-column. But the captions don't appear directly below the image, one of the ...
Yu Chen's user avatar
  • 13
0 votes
1 answer
149 views

Table caption is indented [closed]

I am using cas-dc.cls for my article. If I start to my table with the \begin{table*}, table is generated fine but the caption is indented. If I remove the asterisk like \begin{table}, then indentation ...
WhoCares's user avatar
  • 311
0 votes
1 answer
2k views

How to properly configure cas-dc [duplicate]

I am trying to write an article for an elsevier journal using their double column layout. Unfortunately whatever I try, the class \documentclass{cas-dc} gives me the following error: Undefined ...
meetaig's user avatar
  • 101
0 votes
1 answer
832 views

\shorttitle error in Elsevier latex template

I am getting this error. Can anyone figure out the error? It will be helpful for me. Thank you in advance. Undefined control sequence. Please find code below and details here: \documentclass[a4paper,...
Wang's user avatar
  • 21
0 votes
0 answers
694 views

How to start and use Elsevier cas-sc-template

years ago, i wrote my thesis with TeXnicCenter which was no big deal for me. My sister now has to publish her MD testis and she has to use elsevir cas-sc-template. I sad to help her, but i try to get ...
F. H.'s user avatar
  • 11
2 votes
1 answer
4k views

Compile Elsevier template get this error: LaTeX3 Error: The key 'stm/author/<options>' is unknown and is being(LaTeX3) ignored

I download Elsevier template here https://www.ctan.org/pkg/els-cas-templates/, and use cas-dc-template.tex, when I compile it, I get this error: LaTeX3 Error: The key 'stm/author/' is unknown and is ...
levart's user avatar
  • 21
1 vote
0 answers
167 views

how to customize the Lyx layout to write affiliation with new cas-dc class format?

I almost find a solution. Style Author Margin Static LatexType Command Category FrontMatter InTitle 0 Argument 1 LabelString "ref address&...
Ben's user avatar
  • 11
0 votes
1 answer
744 views

One column PDF from cas-dc two column class file

I am preparing a manuscript using Elsevier's cas-dc.cls class for two column output. I am looking for a way to produce a single column output PDF file using the cas-dc.cls for review. The ...
Adnan Ali's user avatar
  • 229
0 votes
1 answer
377 views

Changing font type and size of nomenclature

I am preparing a manuscript using Elsevier cas-dc.cls class. In that I have added a nomenclature using package nomencl. While I would like the font type and size to be the same as the rest of the ...
Adnan Ali's user avatar
  • 229
2 votes
1 answer
522 views

Figure label separator in Elsevier double column class cas-dc

I am preparing a manuscript using Elsevier cas-dc double column class and facing difficulty to change the label separator for figures. The default is a colon so that a figure label is formatted as Fig....
Adnan Ali's user avatar
  • 229
3 votes
0 answers
899 views

How to put Graphic Abstract and Highlights on the first page of cas-dc document class?

The cas-dc template puts graphicalabstract and highlights environments on the first two pages of an article: Is there a way to define environments like Article Info or Abstract and reproduce the ...
loderunner's user avatar
3 votes
1 answer
366 views

Latex pop up error Misplaced \omit. \multispan ->\omit@multispan for Table in Elsevier cas-sc template

\documentclass[a4paper,fleqn]{cas-sc} \usepackage{booktabs, makecell} \usepackage{siunitx} \usepackage{longtable} \begin{document} \begin{table}%[!htbp] \centering \caption{{Week ahead forecasted ...
Ghulam Hafeez's user avatar
0 votes
0 answers
33 views

\biboptions with cas-dc does not work [duplicate]

Hey Guys I am using the cas-dc DocumentClass and I would like to use sort&compress from natbib with my citation. According to there guiedlines I can use \biboptions{sort&compress} but that dos ...
Janosch's user avatar
  • 113
8 votes
2 answers
10k views

How to remove preprint submitted to Elsevier in cas_dc class template

I have used cas_dc class as a template. I tried to remove the footer 'preprint submitted to Elsevier using this code: \makeatletter \def\ps@first{% \let\@oddhead\@empty \let\@evenhead\@empty \...
user236980's user avatar
1 vote
0 answers
15 views

els-cas-templates references not displaying correctly using PDFLaTeX [duplicate]

I download the contents of the els-cas-templates LaTeX files here, extract it into a new folder. I firstly open up the pdf document and check the references are displaying correctly, before re-...
user113156's user avatar
2 votes
1 answer
1k views

How to use APA6 style in Elsevier's cas-dc.cls class file

Last week I have submitted my manuscript to the ESWA (Expert Systems with Applications), but two days ago they sent an email about my citation format. Here is the mail: Please note that all paper ...
WhoCares's user avatar
  • 311
0 votes
1 answer
297 views

Latex pop ups error "!Missing \endgroup inserted for a table in document class Elsevier {cas-sc}. How can I resolve this problem?

\documentclass[a4paper,fleqn]{cas-sc} %\usepackage{float} %\usepackage{flafter} \newlength\bibsep % ?? \newcommand\theadb[1]{\multicolumn{1}{c}{\bfseries #1}} \usepackage{booktabs,siunitx} \begin{...
Ghulam Hafeez's user avatar
1 vote
1 answer
359 views

Why do I see the "'h' float to 'ht'" warning when I use \ead or \fntext for authors in cas-sc-template?

No matter where I try to edit it, on overleaf or downloading it from the journal link and work on it on some editor on my computer, if I don't remove the \ead{} and \fntext{} for the authors when ...
AmirHosein Sadeghimanesh's user avatar
5 votes
1 answer
4k views

Elsevier cas-dc class hyperref warning: ignoring empty anchor on input line

I'm trying to compile the Elsevier CAS double column template which is provided at: http://mirrors.ctan.org/macros/latex/contrib/els-cas-templates.zip When I compile with pdfLatex on Overleaf, I get ...
HotDogCannon's user avatar
2 votes
1 answer
154 views

How to add an arrow on each side-by-side subfigures in the document class 'cas-dc' in Latex?

I want to point to a specific object (such as the following example) in each sub-images with an arrow. I have also seen some suggestions such as this link. How can I do it in the following document? ...
Ellie's user avatar
  • 242
4 votes
1 answer
562 views

Moving caption to the left [duplicate]

I just add a figure but the caption starts on the middle, how can I fix it? I tried with \captionsetup{justification=raggedright,singlelinecheck=false} but it did not move the caption. I want it to ...
Benja Ramone's user avatar
4 votes
1 answer
475 views

How to change the style of summation symbol in the document class 'cas-dc' in Latex?

I have to use the \documentclass[<options>]{cas-dc} , and also I have used the following packages in my document in Latex. The default style of the summation symbol in the document class cas-dc ...
Ellie's user avatar
  • 242
0 votes
0 answers
509 views

Use of \@xfootnotenext doesn't match its definition

I am using Elsevier LaTeX template to publish an article on an Elsevier journal and I got the following error: 165 Use of \@xfootnotenext doesn't match its definition. \@ifnextchar ... \reserved@d =#...
Ahmed Abdelkareem's user avatar
0 votes
1 answer
1k views

How to add the picture of authors in the biography section of two-column elsevier templat

I wanna add the picture of authors to the biography section of my paper. I use Template article for cas-dc document class for double column output. But the picture boxes overlap with other writings as ...
hamta's user avatar
  • 3
1 vote
2 answers
2k views

Error '! Missing = inserted for \ifnum' with cas-dc class

Background I am currently working on submitting a journal manuscript and am trying to convert my original manuscript from elsarticle class to cas-dc based on feedback and recommendations from Elsevier....
tjk8000's user avatar
  • 27
1 vote
1 answer
3k views

\tnotemark and \cormark not appearing next to title or author when using cas-dc

Background I recently switched over a publication I am working on from elsarticle class to cas-dc in line with the journal's publishing recommendations, elsarticle In elsarticle you might use ...
tjk8000's user avatar
  • 27
-1 votes
1 answer
3k views

How to put a figure with some subfigures in two columns in cas-dc class?

I use cas-dc class of Elsevier in Overleaf. I want to put a figure with some subfigures in two-column paper and my code is as follows: \documentclass[a4paper,fleqn,twocolumn]{cas-dc} \usepackage{...
hamta's user avatar
  • 3
3 votes
1 answer
3k views

Package xcolor Error: Undefined color `'

I am getting this error which points to the input line where \maketitle is. The error goes away once I remove my \title{}. The code is down below: Note: I am using overleaf. \documentclass[a4paper,...
Robot0110's user avatar
  • 141
0 votes
0 answers
279 views

els-cas-templates – Elsevier updated LATEX templates - extra comma when including images using \begin{figure}[h]

I'm using Elsevier single column using Overleaf. When I include images using the following code, I saw an extra comma added on the top of the image. My file is around 40 pages and I have many figures ...
Sam's user avatar
  • 1
0 votes
1 answer
851 views

CAS bundle (an Elsevier document class) - pdfTeX error (font expansion): auto expansion is only possible with scalable fonts

I'm writing a scientific article using CAS bundle from Elsevier, which is a double-column format. This how my document looks. \documentclass[a4paper,fleqn]{cas-dc} \usepackage[numbers]{natbib} \...
Sid's user avatar
  • 3
2 votes
1 answer
2k views

Elsevier cas-sc template: figure caption cannot be centered

I am using Elsevier's cas-sc.cls. Captions of figures are left-aligned, but I want the captions to be aligned to the center below the figure. I tried using \captionsetup{justification=centering} ...
Sravan Kumar's user avatar
0 votes
0 answers
217 views

Using Biblatex/biber, how to make each whole bibliography line-item a clickable hyperlink?

I recently asked a very similar question here using bibtex and natbib. I got in touch with the journal's typesetters, who has asked me to use the cas-sc.cls file along with biblatex/biber, and pointed ...
Dr Krishnakumar Gopalakrishnan's user avatar
3 votes
2 answers
546 views

Margin of caption different than text body in 2-column table (cas-dc)

I have the following problem: I want the caption above the table to start flushed left and not with the space. Here is the MWE copy paste from my project: \documentclass[a4paper,fleqn]{cas-dc} \...
Shawn's user avatar
  • 207
3 votes
2 answers
3k views

Caption placement for double column figure in Elsevier document

I am unable to get my caption to be properly (left) spaced below a figure in a double column document. This is using the Elsevier double-column template. No errors or warnings are present but the ...
Shawn's user avatar
  • 207
3 votes
1 answer
3k views

Removing/Turning off the ORCID ID feature in els-cas template

Is there a way to remove/turn off the ORCID ID feature from the footnote of the title page? I am using Elsevier's CAS LaTeX Single Column Template.
Qureshi's user avatar
  • 65