Questions tagged [epstopdf]
{eps2pdf} is a Ghostscript frontend for converting document formats from {eps} to {pdf}.
178
questions
0
votes
0
answers
22
views
EPS inclusion from texmf-tree not working
Introduction
I have a project-specific texmf tree, which I use for package development, which is called texmf-project. This tree is correctly registered as an auxtree in texlive on debian 11. In my ...
0
votes
0
answers
69
views
Convert .tiff to png in latex
The journal I'm going to submit a paper requires .tiff format for images. I'm trying to add .tiff in latex, and I've found a thread: Add tif image to LaTeX.
However, I cannot add image from .tiff, and ...
0
votes
1
answer
116
views
epstopdf cannot open ghostscript
I am working on a configuration of the latex build process to use with Anki for compiling cards with latex content. I have some eps figures I want to include on some of my cards. The latest Anki ...
0
votes
0
answers
64
views
Legend missing when converting eps to pdf
I have a problem when importing a .eps file produced with tecplot in Texstudio with MikTeX2.9 on Windows10.
As I save the .eps file the figure is right, including the legend. When I import it in ...
0
votes
0
answers
221
views
Unable to insert image in latex on Windows 10 ,getting error- ! Package pdftex.def Error: File `.jpg' not found: using draft se
I have used the following packages-
\documentclass[12pt,a4paper,twoside,openright]{report}
\usepackage{adjustbox}
\usepackage[ruled, vlined]{algorithm2e}
\usepackage{amsfonts}
\usepackage{amsmath}
\...
0
votes
0
answers
27
views
Beamer theme Metropolis conflicts with option in epstopdf.cfg
The following MWE fails in texlive 2021 (pdflatex):
\documentclass[handout,10pt]{beamer}
\usepackage[utf8]{inputenc}
\usetheme{metropolis}
\title{Testing}
\author{Author}
\date{\today}
\begin{...
1
vote
1
answer
320
views
pdftex.def error when uploading in arXiv: PDF file not found
I have the following problem: I am uploading on arXiv a .zip file (obtained through Overleaf) containing some files:
the main .tex file
the reference bibtex file
a folder 'figures' with some .eps ...
1
vote
1
answer
151
views
epstopdf conversion cuts off eps graphics on right side
I am almost done with my thesis and I include a lot of Matlab generated .eps files. I noticed that on some of those the image in the resulting document is cut off on the right hand side just enough to ...
1
vote
0
answers
93
views
Set programmatically latex+dvips+ps2pdf at the beginning of the document with TeXStudio
Bearing in mind that have to change buttons back and forth between pdflatex and latex+dvips+ps2pdf is very time consuming, as pdflatex main compiler
Is there any way to set programmatically latex+...
0
votes
0
answers
224
views
Existing figure is not found in the current working directory Latex
This question has been asked many times, but I still cannot import a figure with .eps extension to the Latex document.
\begin{figure}[ht]
\centering
\includegraphics[width=0.5\textwidth]{...
0
votes
0
answers
2k
views
Overleaf: Package pdftex.def error: File '...' not found: using draft setting
Because the answers to similar questions do not seem to work for my case, I post my question here:
I am currently writing an article in overleaf for which I use the latex template of my university. ...
0
votes
0
answers
278
views
"MiKTeX EPS-to-PDF Converter did not succeed"
I have searched various fora for an answer to this problem, without success:
When running MikTex v21.1 via TeXworks, I repeatedly receive messages such as that below
C:\WINDOWS\system32>epstopdf ...
0
votes
0
answers
47
views
TeXStudio epstopdf error
I get peculiar errors when creating pdf from LateX code:
Extra \endcsname. \SetupKeyvalOptions{family=ETE,prefix=ETE@}
No pdf is created.
When I click the error, I land up epstopdf-base.sty file on a ...
1
vote
0
answers
47
views
epstopdf writes faulty pdfs if a large number of files are converted with a batch file
If I want to convert a lot of eps files into pdf from a batch file (approx. 3200) then it happens again and again that some pdfs are invalid. If I convert them individually, a valid pdf will come out.
...
0
votes
0
answers
73
views
`epstopdf` can't handle paths going up in the file hierarchy: pdftex.def error
I try to include *.eps files from several directories, but epstopdf seems to be able to only go down the file (system) hierarchy, whereas some files are placed in paths I had to symlink into my LaTeX ...
1
vote
0
answers
154
views
epstopdf - EPS files with same name
My project has EPS files of the same name saved in a nested folder structure. For example, I have files ~/folder/sub1/foo.eps and ~/folder/sub2/foo.eps. In my tex file, I have the following epstopdf ...
1
vote
1
answer
195
views
Creating figure files in pdf version from eps files with proper fonts using psfrag and psfragfig
Here is my code
\documentclass[12pt]{article}
\usepackage{pstool}
\usepackage{amsmath}
\begin{document}
\psfragfig[height=83mm,keepaspectratio]{identical_distributions2}{%
\psfrag{p}[t][]{...
1
vote
0
answers
136
views
Problem with EPS/Chemdraw-embedded picture missing
I have a problem with Chemdraw and including a figure I created in Chemdraw (https://www.file-upload.net/download-14217531/test.cdx.html
), which additionally contains a embedded png file. The ...
0
votes
0
answers
233
views
epstopdf error in LyX due to wrong $$o and $$i variables
I am having trouble with LyX not converting my files from PostScript to PDF. I am using Ubuntu 20.04, but the issue was there in Ubuntu 19.10, I just did not need the functionality then. Let's assume ...
4
votes
2
answers
3k
views
Error message: found PDF version <1.7>, but at most version <1.5> allowed: Solutions from other posts don't work
I updated TeXworks via MikTeX several months ago and now get the following warning message every time I try to use epstopdf: "PDF inclusion: found PDF version <1.7>, but at most version <1.5> ...
0
votes
1
answer
199
views
Handling usage of shortcut with epstopdf
On windows I have a problem when the source file is on a directory that is a shortcut.
This problem occurs with with MikTex (MiKTeX EPS-to-PDF Converter 2.9.7229 (MiKTeX 2.9.7250 64-bit)) as well as ...
0
votes
1
answer
307
views
epstopdf pdfminorversion=7 error
When using pdfminorversion=5 I get a warning which I wanted to get rid of (found PDF version 1.7, but at most version 1.5 allowed). Some googling gave me the "solution" pdfminorversion=7. However, now ...
0
votes
1
answer
80
views
When including a .PDF, caption is not below .PDF when using /eject page-height change
Consider the following MWE (you will need a test.pdf image to compile this).
This should compile using standard LaTeX. The problem is
the caption is not below the .PDF image at all. It is on the ...
0
votes
1
answer
33
views
Problem inserting a .eps figure after converted it from a .png using Inkscape
I have a large graph that I have saved in .eps. However, my result text turns my PC slow when reading these big graphs. My CPU usage on the pdf reader process goes to 20% every time my screen hits ...
0
votes
1
answer
488
views
Font in EPS file changes when converted to PDF in LaTeX
I have an .eps figure (Fig.eps). If I view it in a .eps viewer, it looks as expected. In TeXStudio I try to include Fig.eps using includegraphics.
But in the converted file (Fig-eps-converted-to.pdf) ...
1
vote
1
answer
262
views
Convert eps figures into a single pdf file
I have many eps figures in my latex file. Conventionally, after compiling, there will be one pdf file for each eps figure. So in my case, there are tons of these pdf files.
My goal is, instead of ...
0
votes
0
answers
2k
views
overleaf: Trouble with epstopdf: File 'foo-eps-converted-to.pdf' not found
I wrote a draft on overleaf and wanted to upload some .eps figures into my doc (pdfTex used). I tried to compile those .eps files in my local machine (VS Code) and it worked. However, on overleaf I ...
0
votes
0
answers
59
views
Change the Font of a Chemical Structure from an .eps file in TexWorks
I am currently using TexWorks to write my lab report and I am using an .eps file to show a chemical structure. Below is the code in my report.
\documentclass{article}
\usepackage[utf8]{inputenc}
\...
0
votes
0
answers
615
views
miktex pdflatex epstopdf-pkg generating blank pdf
Installed the latest MikTeX on a new computer and the epstopdf package is generating empty PDF files. This seems to be a new issue as I am following the same process that works on my old computer that ...
1
vote
2
answers
80
views
Including graphics that were converted in a separate build directory
I'm using BasicTeX 2019 which includes pdfTeX 3.14159265-2.6-1.40.20 (TeX Live 2019).
I've installed the repstopdf tool and added this near the top of my document:
\usepackage{epstopdf}
\...
0
votes
1
answer
1k
views
eps files displayed as blank [duplicate]
Having installed the latest version of MikTeX (2.9) and TeXmaker (5.0.4) on a new Windows-based machine, it seems that some eps files can be converted into an pdf format, but they are shown as blank, ...
2
votes
1
answer
985
views
Undefined control sequence in TeXstudio even after bugfix
I write my text in Windows 10 and using TexStudio. I recently updated both my MikTeX and TeXstudio to the latest versions. After the update the tex files that were working before start throwing the ...
0
votes
0
answers
224
views
Latex does not compile eps files form Matlab? [duplicate]
I have problem with inputing eps files from Matlab in my latex document.
Matlab version is R2016a. Windows version is 10, editor is Texmaker 5.0.3, MikTeX is version 2.9.
The first case is when I ...
0
votes
0
answers
76
views
Using .eps file in journal of material science template on Mac
I am using TeXworks on a Mac to run a LaTeX template of Journal of Materials Science. The template contains .eps files as all the pictures should be in .eps. I am getting the following error message:
...
2
votes
3
answers
6k
views
Error while using epstopdf
I wish to include eps images generated from Matlab plot (pdf is generated by Matlab as a whole page, that's why eps), however the conversion fails, leaving blank pdf image. The messaghe is:
MiKTeX ...
1
vote
0
answers
222
views
Display error using pstool and psfragfig
I want to include a sketch drawn in TpX in LaTeX using psfragfig.
Unfortunately the sketch doesn't look like as desired when included with psfragfig. Only parts of the sketch are displayed - some ...
0
votes
0
answers
83
views
Latex problem with eps figures generated with Matlab
I have generated eps figures for my article which encountered problem with Latex. When I compile it with Latex --> dvi , The figure on the left side does not appear properly as can be seen in the ...
0
votes
0
answers
37
views
tex4ht: epstopdf not firing at all
I am using the following calls for epstopdf in the Preamble, and was able to successfully convert .eps files to .svg in the /converted_graphics folder for another tex4ht project that had no problems. ...
0
votes
1
answer
702
views
Why TexStudio convert my .eps images to .pdf? Can I avoid that?
When I build my pdf presentation with texstudio it uses epstopfd and convert all my eps images to .pdf, keeping the originals.
My img folder duplicate the size beacause of that. Can I avoid that ...
1
vote
0
answers
247
views
LaTeX changes font converting eps to pdf
I have the following figure made with Dia, a .eps file:
When I include it in my .tex file...
\begin{figure}[t]
\centering
\includegraphics[scale=.8]{fig/complex.eps}
\caption{......}
...
0
votes
1
answer
913
views
compile error Improper \prevdepth from epstopdf when trying tikzcode which must have worked before
I was looking how to resize tikzpicture, and saw this accepted answer here
Specifying the width and height of a tikzpicture
But the code posted there do not work any more.
Here is the same exact ...
1
vote
1
answer
4k
views
EpsToPdf package does not work
I recently run into a problem where on my laptop i can compile a tex file using eps images but on my pc it does not work instead if i try to compile Libre Office is opening and showing the EPS file.
...
1
vote
1
answer
548
views
pdftex.def Error when .eps file is saved on a network drive
Consider the following MWE:
\documentclass{article}
\usepackage{graphicx}
\usepackage{epstopdf}
\begin{document}
\includegraphics[width=0.5\textwidth]{knightstour.eps}
\end{document}
where ...
0
votes
0
answers
70
views
eps images won't show up
I have a figure where each image shows a frame of a video, so their order is important. I have the eps files in the same folder, and I get no errors, but when I run it the images are not shown, ...
5
votes
2
answers
1k
views
How to make PDF1.5 with epstopdf?
I have a couple of .eps-files that I include in my document with the \includegraphics{} macro. Obviously, this macro will call epstopdf that converts the .eps-file into .pdf, that will then be ...
2
votes
1
answer
159
views
How to change a .eps figure to standalone class?
\documentclass{article}
\usepackage{graphicx,epstopdf}
\begin{document}
\begin{figure}[!htb]
\centering
\includegraphics[scale=.7]{Luke.eps}
\caption{Digraph.}
\label{fig:digraph}
\end{figure}
\end{...
3
votes
1
answer
99
views
You can't use `\lastsavedimageresourcepages' in vertical mode. error using TexLive 2018 on Linux
Update:
Thanks for the comment below, adding \the before \lastsavedimageresourcepages in the MWE below worked! But why? I have thousands of places in all my latex files that uses this type of code ...
4
votes
0
answers
729
views
Automically converting eps to pdf, but pdf-version is to high
I use TexLive and compile with lualatex.
I have some eps-images included, which get automatically converted to pdf files. (I assume TexLive does it, because I do not use the package epstopdf).
...
1
vote
0
answers
541
views
Having immense trouble with epstopdf [closed]
I am using TeXstudio on Windows.
My LaTeX file location is in C:/Users/Documents
My image is in the same location.
\documentclass[preprint,12pt,3p]{elsarticle}
\newif\ifpdf
\ifx\pdfoutput\undefined
\...
0
votes
1
answer
474
views
EPS2PDF conversion not working in latex
I am writing a research paper in latex template which has some figures in EPS format. While compiling the template I see a blank box instead of figure I'm not getting why it's happening
I have used
\...