Stack Exchange Network

Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [equations]

{equations} is about the various environments to typeset displaystyle mathematics, e.g. equation and {align}. For general questions about mathematical typesetting use {math-mode}. Both tags are possible on the same question.

533
votes
8answers
108k views

Why is \[ … \] preferable to $$ … $$?

I've heard that you should use \[ ... \] for displayed equations instead of $$ ... $$, but why is that? I'd assumed that it's so that you can more easily tell which are starting and which are ending ...
182
votes
5answers
390k views

eqnarray vs align

Motivation I want to include a list of related equations, say, for a proof, in my LaTeX document. As far as I know, I have two good options, eqnarray and align. Question What is the difference ...
33
votes
2answers
14k views

Left/Right across multi-line equation

I have a multi-line equation that I want to have matching sized parentheses. The advice I read online was to use \left( equation \right. \\ left. rest-of-equation \right) . However, this syntax leaves ...
148
votes
5answers
98k views

What are the differences between $$, \[, align, equation and displaymath?

I once learnt, that it is uncool to use $$, but why is that? Why does \[ not act as a abbreviation to \begin{align}? I noticed, that there is a difference, since one cannot use & and \\ inside a ...
220
votes
6answers
632k views

How can I split an equation over two (or more) lines

I am having the following equation: \begin{equation} Q(\lambda,\hat{\lambda}) = -\frac{1}{2} P(O \mid \lambda ) \sum_s \sum_m \sum_t \gamma_m^{(s)} (t) \left( n \log(2 \pi ) + \log \left| C_m^{(s)} ...
75
votes
5answers
44k views

align vs equation

I always use align in my documents, and avoid equation. Is there anything wrong with that? My reasoning behind this: align > equation, so why not use it?
102
votes
2answers
70k views

Separate long math text under sum symbol into different lines?

I have the following equation, where there is a lot of stuff under the sum symbol: \begin{equation} d(\vec{x},\vec{y})= \sum_{Z_{xy}\in\vec{Z}_{xy},\forall x\in\vec{x},\forall y\in\vec{y}} f(...
136
votes
2answers
223k views

How to write conditional equations with one-sided curly brackets [duplicate]

I want to write a conditional expression such as the following. What is the best way to express such conditional expressions in Latex?
170
votes
5answers
575k views

How to break a long equation? [duplicate]

I have a long equation but long enough to occupy two lines. I want to break it to improve readability. How can I break it? \begin{equation} F = \{F_{x} \in F_{c} : (|S| > |C|) \cap (minPixels &...
47
votes
2answers
38k views

How to globally change the spacing around equations?

How could I go about setting the 'above' and 'below' vspaces around the equation environment? If the same could be done for the subequations or gather environments, this would be a bonus.
64
votes
3answers
26k views

How to make a standalone document with one equation?

I was surprised to find that standalone package can not compile a document with an equation: \documentclass{standalone} \begin{document} \begin{equation} % not working! F(V, T) = E(V) + D(T) \end{...
119
votes
4answers
92k views

How to get only one vertically centered equation number in align environment with two equations

What I have are two equations with align and I want one single equation number to refer to this system of equations. To illustrate, I have \begin{align} dr_t &= \kappa ( \theta - r_t ) dt + \...
24
votes
1answer
4k views

Changing the appearance of equation numbers with amsmath

For equations in my document, I use the facilities of the amsmath package. In order to make the equation numbers more eye-catching, I want them to be in boldface and a little bit indented to the ...
36
votes
1answer
50k views

How can I add left aligned text to an equation?

I have a document I am trying to copy to learn TeX. Here is what I have encountered: How can I have the "or" in the equation. This is what I have right now: \[ f = ma; \] But $a$ is the change in ...
72
votes
5answers
234k views

Reducing font size in equation

I wanted to type an equation in LaTeX. But it is too long to fit into one line. It involves big arrays with many columns so I cannot split it. I wanted to reduce the font size so that it can fit in ...
40
votes
4answers
14k views

Sharing alignment between equations in two different items

In the following minimal example, I have two equations inside an itemize environment, with an item per equations. Each equation is defined in its own equation environment. \documentclass{article} \...
17
votes
1answer
8k views

Blank lines in align environment

Is there a way to insert a blank line between two equations in align environment? From what I understand a blank line is interpreted as \par and \par is not allowed in align. Can I disable this "...
124
votes
4answers
132k views

align* but show one equation number at the end

I am using align*, but I still need an equation number. I know one solution is to use align and add \nonumber to all lines but the last. Is there a 'lazy' way to do it? I searched a little and found ...
73
votes
2answers
11k views

How do I number equations only if they are referred to in the text?

I have a paper where all equations are numbered, but I want to number equations only if they are actually referred to in the .tex file using \ref{}. How can I make that happen? Alternatively, how can ...
63
votes
6answers
35k views

How to write a perfect equation parameters description?

Equation's symbols or parameters description are shown below, however, the = and the details of parameter are not aligned. I want to make a parameters list for a equation like this, in which symbols,...
89
votes
4answers
195k views

Attractive Boxed Equations

I often used \boxed{...} from the AMS math package to place a box around important equations. However, this approach often produces somewhat awkward looking output. Consider \documentclass{article} ...
26
votes
1answer
203k views

How to left align a set of equations

I wanted to left align a set of equations. I've tried the solution provided in aligning to the left. It worked. But, I wanted to have a single equation number for the entire flalign in order to refer ...
123
votes
3answers
71k views

Is it possible to pagebreak aligned equations?

The report I'm writting features a lot of long, multiple lines equations. To reduce visual polution I've been using an aligned environment nested inside equation. This way (unlike just using an align ...
89
votes
3answers
155k views

Label equation with a symbol

I would like to label an equation with an arbitrary symbol, rather than a number, or letter. Is this possible?
16
votes
1answer
7k views

Switch between leqno and reqno options (of amsmath) in the same document

I'd like to know if it is possible switch between the leqno and reqno options in the same document keeping the numbering of the equations. Namely i use the reqno option (default for amsmath and the ...
82
votes
7answers
289k views

How to align a set of multiline equations

I am trying to align a set of long equations, that are themselves align environments as most of them are spreading on multiple lines. Currently I just have a sequence of align environments, with ...
123
votes
4answers
393k views

How to write a function (piecewise) with bracket outside?

How to write this Piecewise function using LaTeX? I tried $ \begin{array}{cc} \{ & \begin{array}{cc} 0 & x\leq 0 \\ \frac{100-x}{100} & 0\leq x\leq 100 \\ 0 &...
46
votes
2answers
35k views

Multi-page equations — problem

I have a very long derivation, that needs to look like: A = B \\ = C \\ = D \\ etc. The derivation spans across many lines. I'm looking for a way to typeset it so that when it reaches the end of ...
47
votes
5answers
322k views

Align equation left

Here is my split equation: \documentclass{article} \usepackage{amsmath} \begin{document} \begin{equation} \begin{split} a_{ijk} =& \frac {Pr(M_{I} =2 \& M_J=1 \& M_K =1 | I=i , J=j , K=...
174
votes
2answers
9k views

Making equations copyable in pdf

I would like to write a .pdf, where my readers could copy the rendered formulae and paste them directly in their TeX documents. And the copied text would automatically be: \int x\sin ax\;\mathrm{d}x ...
153
votes
4answers
211k views

Show equation number only once in align environment

I want the equation number to be shown only at the last line, or better, somewhere in the middle of all. So instead of (1), (2), ... only (1). I use \begin{align} ... \end{align}
42
votes
3answers
7k views

Which command should I use for displayed equations?

A number of related questions have already been asked about this issue: align vs equation which is preferable to what to do with this hyperref note on amsmath and even eqnarray vs align But I'm ...
25
votes
2answers
11k views

Highlight an equation within an align environment

I would like to define a command that puts a red box around an equation with yellow highlighting. I have the basics working pretty well. What I am unable to figure out is: How to keep the alignment ...
101
votes
2answers
33k views

Two letter variable names

In math mode, TeX assumes "hidden multiplication" (so that two variable names put nearby have invisible multiplication between), so that, AFAICT, expressions like $ABC$ are rendered with small ...
48
votes
3answers
25k views

Centering \vdots in a system of many equations

I have a system of equations with an arbitrary number of equations (k). I'd like to use \vdots to compactly describe the system, like so: \begin{align*} R(-1) &= \sum_{i=1}^m A(i)R(i-1) \\ R(-...
22
votes
1answer
12k views

How to reference equations using letters and numbers

Sometimes it is convenient to refer to a group of equations by a letter and a number. For example: 2+1 (A1) 2+4 (A2) x^4 (B3) x^e (B4) Placing \tag{A\theequation}\label{eqn:thisone}\...
15
votes
1answer
22k views

How to change equation numbering style

Here is my MWE: \documentclass[a4paper, 12pt]{report} \usepackage{amssymb, amscd} \begin{document} \chapter{Test} \begin{table}[h] \center \caption{Test} \begin{...
18
votes
3answers
14k views

Aligning across 'aligned' equation blocks

I'd like to format two groups of equations such that all their equal signs line up and such that I can put a big brace to the right of each block to annotate that block. The last part is easily ...
24
votes
3answers
15k views

How to increase the spacing between equations in “gather”?

Is there a way to consistently increase the vertical spacing between equation lines in a gather (or gather*) environment from amsmath? Specifically, I want to produce something like \begin{gather*} ...
9
votes
2answers
2k views

Defining a new command for making functional lines / package

As you have probably guessed from the title my mother tounge is not English. Therefore I have no idea if "Functional lines" is the correct term for what I am looking for. Basically I am looking to ...
13
votes
2answers
993 views

Equation number enclosing parentheses misplaced with Polyglossia+Hebrew+amsmath

I am compiling the following MWE using XeLatex within TeXnicCenter and get a garbled equation number: \documentclass{article} \usepackage{amsmath} \usepackage{polyglossia} \setmainlanguage{hebrew} \...
63
votes
4answers
116k views

How can I change the font size in math equations?

I find that whenever I'm typing some equations into a document, and the equation gets a bit complex (let's say a fraction in a parentheses, squared, inside a square root, inside a fraction), the ...
112
votes
7answers
380k views

How do I turn off equation auto numbering

I have an equation like this: \begin{align} P(A \cup B) = \sum_{\omega \in A \cup B} P(\omega) = \sum_{\omega \in A} P(\omega) + \sum_{\omega \in B} P(\omega) = P(A) + P(B) \end{...
47
votes
6answers
11k views

How can I get an underbrace and an overbrace to partially overlap in an equation?

Sometimes I want to describe portions of an equation using \underbrace and \overbrace in such a way that the portions are not completely distinct, for example: /-------\ x = A + B + C + D + E ...
22
votes
4answers
2k views

Graphics equations: put text on equations

I have a big question that I cannot solve by myself. I would like to add text on my equations, but I like to have some graphics on those. For instance, I would like to explain why I am doing ...
22
votes
7answers
13k views

Align two inequalities

I am trying to align two inequlities vertically. The \le signs should have the same horizontal positions and the term in the should be centered. My first attempt: \begin{align*} \sum a &\le \sum ...
14
votes
5answers
14k views

abovedisplayskip vs abovedisplayshortskip

What is the difference between these two? http://en.wikibooks.org/wiki/TeX/abovedisplayskip http://en.wikibooks.org/wiki/TeX/abovedisplayshortskip I don't know why, but it seems to work unusually. ...
20
votes
6answers
14k views

Diagonal strikeout starting too low and ending too high

I want to strikeout an equation with diagonal line but I've not managed to get the diagonal line to draw as I want. The closest I've gotten is via the first example in Frédéric's answer of \cancel ...
33
votes
5answers
5k views

LaTeX accessibility

Does anyone know of any LaTeX modules that makes the pdf output generated by pdflatex Americans with Disabilities Act of 1990 (ADA)/Section 508 compliant? Specifics: With regard to math. One simple ...
7
votes
1answer
735 views

fleqn document class option, long text lines, and hyperref package

When the fleqn option is used, the vertical spacing before an equation placed right after a "long" text line (exactly \linewidth I would say) is improperly set up. See below: From the mathmode user ...