Stack Exchange Network

Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [floatrow]

{floa­trow} is a pack­age that cus­tomizes lay­outs of {floats} (both the float body and its {captions}).

1
vote
1answer
21 views

single caption under multiple figures using floatrow

I am trying to place a single caption underneath four figures. I can place a caption underneath each figure, but that is not what I want. I am using the floatrow package. \documentclass{article} \...
1
vote
0answers
36 views

Issue with \usepackage{floatrow} . please help

All, I used to run my my .tex code without any problem until this week where I started getting error ! LaTeX Error: File `floatrow.sty' not found with the package \usepackage{floatrow} I dont see ...
0
votes
1answer
25 views

Modify Floatfoot of Floatrow Package and move Rule

From the floatrow package, I am using the floatfoot command to reference sources and similar content. This MWE produces an output that is quite acceptable: \documentclass{article} \usepackage{...
1
vote
0answers
27 views

How to hang floats in outer margins with floatrow in twoside documents

In this document I tried to have wide figures hang in the outside margins. \documentclass[twoside]{book} \usepackage{graphicx} \usepackage{lipsum} \usepackage{floatrow} \floatsetup[widefigure]{...
1
vote
1answer
35 views

Figures and captions with a left shift in twoside documents using floatsetup

I'm using scrbook class and configure floats by the floatrow package. In twoside documents it produces a left shift of 2pt for floats on odd pages. How can align floats as on even pages? Example: \...
4
votes
1answer
36 views

inconsistent space between subfloats in subfloatrow

There is an inconsistent space between the second and third subfloat in subfloatrows. I don't understand where it comes from and how to remove it. (OMFSM, MWEs can take a really long time to assemble!)...
1
vote
1answer
42 views

Bug? ibidem in floats with the `floatrow`-package

When I use the floatrow-package with biblatex and a citation style that uses ibidem-tracking, usually, when I cite a publication twice, the second time the citation gets replaced with (ibid.) (or ebd. ...
1
vote
1answer
43 views

Rotating captions with adjustbox does not work when floatrow package is loaded

I tried to rotate a figure and its caption using the adjustbox package. This works fine, until I load the floatrow package too, then the caption isn't rotated. See my MWE: \documentclass{article} \...
4
votes
1answer
94 views

Automatic scaling of figure with side by side images with subcaption

I'm using a quite satisfying solution for figures with side by side images with subcaption, a solution by which images are sized automatically to same height and to text width, see MWE below. \...
8
votes
1answer
148 views

Automatic scaling of side by side figures

I'm using a quite satisfying solution for side by side independent caption figures, a solution by which images are sized automatically to same height and to text width, see MWE below. \documentclass{...
0
votes
0answers
132 views

two figures side by side with a single caption using floatrow

I use the floatrow package to place figures side by side and have now difficulties in a case I want to have a single caption for two figures side by side. The code \begin{figure}[!ht] \...
0
votes
0answers
59 views

Floatrow: \floatbox for single element floats

Is the use of \floatbox (\ffbox, \ttbox, ...) required in single element float enviornments? While the documentation of floatrow uses it in all its examples, I can't tell a difference between an image,...
2
votes
3answers
64 views

Figure made by two different size images, automatically scaled, with single caption

In order to get a figure made by two different size images automatically scaled to the same height and to full text width, with a single caption, I tried to adapt some examples from floatrow package. ...
6
votes
1answer
172 views

How to define an environment which produces floating tables with a given style?

I need to insert (floats) tables with a precisely defined style inside a technical document, and I succeeded in producing the sought for result by using the tabularx and the floatrow packages. An ...
1
vote
0answers
233 views

floatrow and capbesidewidth for side caption

I am having some weird problem using fcapside in floatrow where I can't get the side caption to auto-calculate its width based on my figure. Instead, the side caption width seems to expand with the ...
2
votes
1answer
75 views

Floatrow: multiline caption overlaps subsequent float

I am trying to create two subfigures with their own caption and a common caption using floatrow. However the caption for the figure containing the two subfigures is not adjusted in size if it covers ...
0
votes
1answer
223 views

Vertical alignment of table and figure placed side-by-side in two-column mode

I'm using IEEE's spconf.sty file to create a two-column document. I am placing a table with its caption above and a figure with two subfigures with their captions below side-by-side using the floatrow ...
0
votes
1answer
82 views

tikz image overlay within a floatrow environment

I am trying to inset a single small image over the top of two larger figures separately on the same page, within a floatrow \ffigbox environment, but it seems as though floatrow has a problem with ...
1
vote
1answer
109 views

How to prevent floatrow from moving the caption?

In this question the suggested solution (duplicate) doesn't actually work. \documentclass[aps,prc,reprint,superscriptaddress,floatfix,showpacs]{revtex4-1} \usepackage[utf8x]{inputenc} \usepackage{...
0
votes
0answers
32 views

floatrow/subfigure - fit 7 figures in one page - caption as a subfigure [duplicate]

I am trying to put in one page a set of 7 subigures. What I would like to achieve is the following The 7th image should be placed on the first column on the left hand side of the document (yellow box)...
0
votes
2answers
247 views

wrapfigure and fbox with floatrow

I am new to latex and still in the stage where I am modifying example code, so maybe there is a better way to do this or I'm just missing something. I have 3 subfigures and I want them to stack in a ...
1
vote
1answer
157 views

Vertical subcaption beside horizontal subfigure

I have a very specific problem: I need two or three subfigures placed under each other. I want to have one main caption for both of them and a subcaption for each one. Because the pictures are pretty ...
0
votes
1answer
137 views

Wrapfig with sidecaption (floatrow) - How to get text wrapped around a sidecaption and image?

I'm writing my PhD thesis, and for my experimental setup page, I want to put a page-long image of my cryogenic insert. It's a figure with length of \textheight and width of approximately 0.1\textwidth....
1
vote
1answer
73 views

How Can I put two figures beside in floatrow environment?

I have written my PhD thesis in Persian language using xepersian package. I want to put two figures beside. I use floatrow environment. In this case, figure 1 appears in left and figure 2 appears in ...
0
votes
0answers
109 views

Figures Side by Side with floatrow, Captions above the Figures

I used the floatrow package to place two figures side by side to one another. My issue is that I want the caption of each figure above and not below it. My code is, \begin{figure}[Hg] \begin{...
0
votes
1answer
153 views

Control the space after Floatrow figures and tables (enabling belowskip)

How do you control the space below a caption when using the floatrow package? MWE: \documentclass[12pt,a4paper]{article} \usepackage{graphicx} \usepackage{lipsum} \usepackage{floatrow} \floatsetup[...
1
vote
1answer
162 views

Bottom-right align, multi-line, fixed width caption, using float-row

How can I move a fixed-width, multi-line caption to be flush, bottom-right, aligned with an image (highlighted by a red box, in the image below) MWE: \documentclass[11pt, a4paper, oneside]{memoir} \...
1
vote
1answer
1k views

Minted and floatrow incompatible

I encountered this error message while trying to use the minted package along the floatrow package: (/usr/share/texlive/texmf-dist/tex/latex/floatrow/floatrow.sty Package: floatrow 2008/08/02 v0.3b ...
1
vote
1answer
118 views

floatrow: can I use an alternative figure object?

What I want to do is to use Figure, Table and Alternative Figure captions, placed on the left or the right side depending on whether the current page is odd or even. Thanks to the great help of the ...
2
votes
1answer
135 views

floatrow: change caption position in odd and even pages (continued)

According to this question floatrow: change caption position in odd and even pages I asked for help in order to auto position the caption text of a figure from the floatrow package in odd and even ...
1
vote
1answer
145 views

floatrow: change caption position in odd and even pages

I want to use captions beside figures, so I used the floatrow package. Yet, as illustrated below, I can't auto change the positioning of the caption text from left to right, depending on odd or even ...
1
vote
1answer
282 views

Reduce space between content in floatrow

I am using floatrow package to place image and table side-by-side. I use the following mark-up: \begin{figure} \begin{floatrow} \ffigbox{% \includegraphics[height=.7\linewidth]{images/task_2/1_1....
1
vote
1answer
387 views

Floatrow and caption beside in a twocolumn document

Please look at the following example: \documentclass[a4paper, landscape, twoside, twocolumn]{book} \usepackage[a4paper, landscape, twoside, twocolumn, top=0.8cm, bottom=1cm, bindingoffset=1.5cm, ...
2
votes
0answers
84 views

No space between columns in twocolumn layout bug

I have a latex document and sometimes there is no space between the two columns on some pages, which makes the text hard to read(and ugly). I managed to figure out, that the problem appears, if I use ...
0
votes
1answer
2k views

subcaption - caption beside figure

I am trying to use the subcaption package (not subfig) to generate the labels of the subfigures beside the figure. I have found many similar questions, but all answers (like this one) use subfigand ...
0
votes
1answer
89 views

Tufte margin caption effect with floatrow

Is it possible to acquire a caption in the margin of the next paragraph (as in the example below), but using floatrow instead of the entire tufte class? This is the standard beside caption from ...
1
vote
2answers
1k views

Left Align longtable Caption Beginning at Starting Point of Table

I am having trouble left aligning longtable captions in Table 1, starting at the same table object left margin. I am essentially attempting to achieve what I have done in Table 2. I came across a ...
0
votes
1answer
125 views

Figures misalignment when using 'floatrow'

I want to put a table next to a figure on the same row and in order to do that I am using the floatrow package. However, I cannot align the two. This is what is happening: The code I am using to ...
2
votes
1answer
105 views

threeparttablex in combination with floatrow: Table not centered anymore

I use threeparttablex to provide longtables with the threeparttable functionality. That works well in general. However, I need to load floatrow as follows: \usepackage{floatrow} \DeclareFloatFont{...
1
vote
1answer
134 views

Subcaption between figure and the actual caption itself

I have a figure with some variable names in it. At the moment i use a floatfoot from floatrow to add the explanation for the variable names and i really like the looks of it, but it has multiple ...
3
votes
1answer
163 views

have the caption of a figure overlaping the figure (floatrow)

i try to overlap the caption of a figure with the figure itself as shown in the picture: the picture is only mockup of what i want to achieve. i use the following code to insert the image and caption ...
1
vote
1answer
43 views

Combining Image and Table Vertically

What is the best way to combine an image and a table vertically like the following layout? ______________ | Image | |______________| a) Our Image ______________ | Table | |...
1
vote
1answer
79 views

Asymptote and floatrow compatibility

I am trying to put two floats in a row using float row. Everything works fine with a structure: \documentclass[12pt,letterpaper]{article} \usepackage[inline]{asymptote} \usepackage{floatrow,calc} \...
3
votes
1answer
302 views

Floatrow package conflicting with centering longtable

Consider the MWE below. If I \usepackage{floatrow} the longtable is not horizontal centered. If I comment out \usepackage{floatrow} the table is properly horizontal centered. How can I get this ...
1
vote
0answers
35 views

floatrow.sty error; line 485; No room for a new \dimen . …finable\flrow@foot{\newinsert\flrow@foot} [duplicate]

I get "floatrow.sty error; line 485; No room for a new \dimen . ...finable\flrow@foot{\newinsert\flrow@foot}" The code used is given below. Any help to solve this is highly appreciated. Adding \...
5
votes
1answer
260 views

custom listof with endash separator

I'm using floatrow to create a new environment Quadros (it means frames) but despite showing the correct separator within caption the List Of Quadros still displays a empty space instead. Just need ...
3
votes
1answer
881 views

Adjusting vertical spacing in subfloatrow captions (subcaption+floatrow)

I am trying to adjust sub-captions for sub-figures in a figure which includes multiple \subfloatrows and an additional \ffigbox outside the rows. How can I modify the vertical spacing between sub-...
4
votes
1answer
455 views

Why does \ttabbox from floatrow make the caption slightly to long

I have the following problem, I am trying to make the caption of my table as big as the table itself. The floatrow package seems to do the trick. But in my case the caption for a reason I do not ...
0
votes
0answers
104 views

floatrow throws the error “No room for a new \count” [duplicate]

I wanted captions on the side of figures, so, following this answer, I tried the floatrow package. This, however, resulted in the following error: C:\Program Files (x86)\MiKTeX 2.9\tex\latex\floatrow\...
0
votes
1answer
711 views

wrap text around a figure inside a floating box

I'm trying to put a small figure in a floating box; the picture itself doesn't need to float, it should only float with the box. I've been doing some adjusting of minipages, but that requires some ...