Stack Exchange Network

Stack Exchange network consists of 175 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [floatrow]

{floa­trow} is a pack­age that cus­tomizes lay­outs of {floats} (both the float body and its {captions}).

1
vote
1answer
110 views

How to prevent floatrow from moving the caption?

In this question the suggested solution (duplicate) doesn't actually work. \documentclass[aps,prc,reprint,superscriptaddress,floatfix,showpacs]{revtex4-1} \usepackage[utf8x]{inputenc} \usepackage{...
8
votes
1answer
988 views

Problem with “floatrow” package in yathesis

I am using yathesis to edit my thesis. In the main file of the template, the package "floatrow" is added automatically. I use Mac OS X 10.10. Before today, the MacTex version is 2014. and my work is ...
5
votes
2answers
16k views

Table and Figure side-by-side with Table caption above, Figure caption below

A continuation of this question. I'm fighting a page-limit in a single-column layout and I need to put a Figure and a Table side-by-side and provide them with independent captions. However, the style ...
4
votes
2answers
352 views

Automatic scaling of tikz images in floatrow

I have multiple images in a row (using floatrow) and would like to scale them, that they fill the row, while their top and bottom edges are flush to each other, and the aspect ratio of the images them ...
39
votes
2answers
86k views

How to remove figure label?

I'm using floatrow package to organise my figures, but then would like to add an image in the preliminary chapters which should NOT contain figure label e.g. Figure 1, but only the caption To my ...
3
votes
1answer
7k views

Caption labelfont in uppercase, what am I doing wrong?

I'm trying to get the subcaptions and captions in sanserif font and Uppercased. According the manual of the caption package this should be possible in the following way.However, this doesnt seem to ...
2
votes
1answer
2k views

sidesubfloats… why does this errored code work and my “correct” code doesnt?

I use the following code to get a 3 x 3 figures with automated labels that range from a-i. As you can see there is an error in the code, I use sufloatrow instead of 'subfloatrow' a few times. However,...
20
votes
2answers
9k views

How to build and combine sophisticated layouts in figures

How can I get a layout like the one below in my document?                 With this question, I am looking for: An answer ...
8
votes
1answer
1k views

afterpage clashes with restoregeometry from the geometry package

I'm writing my thesis and have used the geometry package to control the size of the text body so that it follows 'good' typesetting practices as described in the KOMA-script documentation. Many of ...
8
votes
1answer
149 views

Automatic scaling of side by side figures

I'm using a quite satisfying solution for side by side independent caption figures, a solution by which images are sized automatically to same height and to text width, see MWE below. \documentclass{...
7
votes
2answers
3k views

subfloatrow of package floatrow does not work without subcaptions

I have two pictures that I want to place as subparts using the floatrow package. The following example works if I add subcaptions to the parts, but does not if I leave them out. I do not want any ...
5
votes
1answer
3k views

floatrow: Changing the formatting of table footnotes

The floatrow package, which is useful for customizing the layout of floats, also allows to add footnotes as well as additional explanations (besides the caption) to tables. (The main commands are \...
6
votes
1answer
4k views

Different width for caption and floatfoot with floatrow

I am using the floatrow package. I would like to define a separate width for both the caption above and the \floatfoot below the floats. I want the caption to span the entire width of the page, but ...
5
votes
1answer
234 views

TikZ externalization with floatrow package

When using the TikZ externalization library within a \ffigbox from the floatrow package, the external image is created two times. The reason is, that the argument of \ffigbox gets parsed two times. ...
4
votes
1answer
3k views

Horizontal spacing between subfloats using floatrow and subfig (with fr-subfig support)

I am trying to arrange two rows of sub-figures using subfig and floatrow. The captions are aligned as I wish and the vertical alignment of the objects is also fine. However, I cannot figure out how to ...
4
votes
1answer
94 views

Automatic scaling of figure with side by side images with subcaption

I'm using a quite satisfying solution for figures with side by side images with subcaption, a solution by which images are sized automatically to same height and to text width, see MWE below. \...
4
votes
1answer
573 views

Too wide subfigures

I try to place to figures side by side, as can be seen below the resulting figures are to wide, they expand over the right document border. Do I have to take the gap into account when sizing the ...
4
votes
1answer
233 views

Problem using tikz with a caption and floatrow together

I have this MWE drawing a caption over an image but when I load the floatrow package, the caption will be drawn under the image. When I only write a text over the image it works. \documentclass{...
2
votes
1answer
135 views

floatrow: change caption position in odd and even pages (continued)

According to this question floatrow: change caption position in odd and even pages I asked for help in order to auto position the caption text of a figure from the floatrow package in odd and even ...
1
vote
2answers
266 views

Adjust link target for rotated two part figure

I want to place two pictures side by side as subfigures, rotated 90 degrees and those two pictuers filling a whole page. While this works from the looks I have some issues, with the hyperref package ...
1
vote
1answer
145 views

floatrow: change caption position in odd and even pages

I want to use captions beside figures, so I used the floatrow package. Yet, as illustrated below, I can't auto change the positioning of the caption text from left to right, depending on odd or even ...
17
votes
1answer
19k views

Table captions are always placed below

I have a problem with table captions in LaTeX. They appear always below the tables instead of above as required by my editor. I've read lots of documentation and everybody says that if you place the \...
4
votes
2answers
3k views

subfigures using subfloatrow, overpic, tikz to add rows to annotate imported images/figures

I did my diligent search for a combination of subfloatrow, overpic, and adding arrows for annotation of imported images using tikz, but couldn't find one. These kind of images are typically found in ...
16
votes
3answers
624 views

┓- shaped figure and caption

I have a (float) figure that has a ┓-shape, that is there is a huge blank square at the bottom left. I'd like to put in this blank the caption of the figure. Is there a way? My class loads caption ...
7
votes
1answer
5k views

How to layout four figures with floatrow, two of them vertically?

how can I get a layout like the one below in my document? _____________ _____________ _______________ |Big Picture1| |Big Picture2| |Small Picture1| | | | | |______________| | ...
6
votes
1answer
2k views

Alignment of Margin caption with floatrow and caption

I want my captions in marginpar to be left aligned. I am using raggedright option in caption package along with floatrow package. The captions are left aligned only for long captions. MWE \...
4
votes
1answer
361 views

hyperref link jumps beneath table's top caption when floatrow is included

I use the following packages related to captioning, tables and hyperlinks: \usepackage{hyperref,caption} \usepackage[style=Plaintop]{floatrow} \usepackage[referable]{threeparttablex} I have a table ...
9
votes
2answers
3k views

Vertically fit a figure with caption to page

I have a very large(heightwise) figure and would like to fit it on a page with its caption, that I place below (document wide style which I would like to keep, and the figure fills the line anyhow, so ...
6
votes
1answer
884 views

Incorrect figure numbering when using subfloats in a subfloatrow

I have a document with a lot of subfigures which are different heights and need to be placed side-by-side and centered vertically. It seems like the floatrow package is ideal for this. After much ...
4
votes
1answer
674 views

floatrow and dirtree clash

I am using dirtree to visualize a directory structure. It needs to be embedded into a float as to avoid problems when a pagebreak occours. This works fine except when loading floatrow which i use to ...
4
votes
1answer
2k views

Center subfigure using floatrow

I'm working with caption and subcaption to style my (sub)figure captions and especially with floatrow to center my figures. However, this does not work for subfigures, as the following nMWE (nearly ...
4
votes
1answer
580 views

subfloatrow: incorrect continued numbering

I am using the subfloatrow environment (provided by the floatrow package) to organise the layout of figures for my thesis. For the MWE provided below, the numbering of the sub-figures in the second ...
3
votes
1answer
184 views

How do I make hyperref show the entire figure when I'm using both caption and floatrow?

I use the caption package in my document to control the appearance of captions on figures and tables (small text, with bold labels): \usepackage[font=small, labelfont=bf]{caption} I use hyperref to ...
2
votes
2answers
1k views

How to insert a main caption beside subfigures?

I have 3 subfigures that I insert at width=0.5\textwidth, which leaves some empty space. I would like to insert the main caption in this space. How can I do this? I am using subcaption package for ...
2
votes
1answer
128 views

How can I track down a bad spacing issue?

I use a rather complex class, built on top of extarticle with twocolumn option. It loads a lot of packages. One of them is floatrow. Sometimes, I get a very annoying error that can be seen in the ...
2
votes
2answers
1k views

Using floatrow or \FBWidth to prevent captions from wrapping around

I have two tables side by side like so: \documentclass[11pt,reqno]{amsart} \usepackage[utf8]{inputenc} \usepackage{lipsum} \usepackage{amssymb} \usepackage{color} \usepackage{enumerate} \...
2
votes
1answer
135 views

How can I get correct labelling of sub-figures with subfig and floatrow?

I am using subfig and floatrow to manage sub-figures. Without floatrow, everything works OK, but I need floatrow to easily align the captions, as the subfig manual explains. Adapting the example on ...
1
vote
0answers
194 views

dpfloat affects table caption spacing with floatrow [closed]

I am trying to format two full-page tables such that they appear side-by-side on consecutive pages in a double-sided report. Typically this is easy to achieve using dpfloat however, I have found ...
1
vote
1answer
206 views

How to prevent reordering float appearance?

Latex changes the order of floats in my document. It moves figure 2 before figure 1. Figure 1 occupies a whole page, therefore I set it to be inserted on a float page, in afterpage environment. How to ...
0
votes
0answers
104 views

floatrow throws the error “No room for a new \count” [duplicate]

I wanted captions on the side of figures, so, following this answer, I tried the floatrow package. This, however, resulted in the following error: C:\Program Files (x86)\MiKTeX 2.9\tex\latex\floatrow\...
0
votes
0answers
32 views

floatrow/subfigure - fit 7 figures in one page - caption as a subfigure [duplicate]

I am trying to put in one page a set of 7 subigures. What I would like to achieve is the following The 7th image should be placed on the first column on the left hand side of the document (yellow box)...