Questions tagged [flow-charts]
A flow chart is a special type of diagram representing a workflow, process or algorithm.
220
questions
1
vote
1
answer
42
views
Draw a flowchart
I want to draw a Flowchart in latex
the main idea is in this image
and I try to do it as this
by use this code
\documentclass[12pt]{report}
\usepackage{tikz}
\usetikzlibrary{shapes.geometric, ...
- 11
0
votes
0
answers
14
views
Flowchat \end{tikzpicture}: Overfull \hbox 74.6pt
I got overfull error (74.6pt) in \end{tikzpicture}.
It goes over the page and it cannot be presented in a A4 page.
It also start at the center of the page and I want to start it at the left hand side ...
1
vote
1
answer
18
views
Arrow is not showing correcting in Tikz Flowchart
I want the arrow to look like the picture attached but I am unsure how as I an new and I am struggling.
\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{positioning}
\usepackage{setspace}
\...
1
vote
1
answer
28
views
How to reduce the vertical distance between lines in Tikz flowchart?
I an new to latex and Tikz and I would appreciate your help. This is my code and I would like to remove the space shown in the picture by the red arrow.
This is my code:
\documentclass[margin=3mm]{...
1
vote
1
answer
68
views
coding the arrows in flowchart
My problem is that I don't know how to draw the arrow from A-7 (diamond 1 ) to A-4
\documentclass{article}
\usepackage[left=0.5cm,right=1.27cm,top=1.3cm,bottom=1.3cm]{geometry}
\usepackage[french]{...
- 69
4
votes
1
answer
81
views
Complex Flowchart with Boxes within a Dotted Box using TikZ
I'm trying to produce the following flowchart with adding multiple dotted backgrounds. I know the basics for creating a simple flowchart using Tikz, however, I'd like to know how I can create a ...
- 147
0
votes
0
answers
67
views
Flowchart with dotted background using TikZ [duplicate]
I'm trying to produce the following flowchart with adding multiple dotted backgrounds. I know the basics for creating a simple flowchart using Tikz, however, I'd like to know how I can create a ...
- 147
2
votes
2
answers
116
views
How to draw flowchart in LaTeX
I need to make this flowchart in LaTeX. I used the TikZ package but I don't know how to draw this parenthesis and this form. I also don't know why the arrows between the two last nodes aren't drawn.
...
- 69
0
votes
1
answer
42
views
Node alignment on flowcharts
So, I'm building a flowchart based operation manual for the SEM at the lab that I work, and I'm having a trouble aligning a node with respect to two others.
I've seen already a few pages[1][2][3][4] ...
- 25
3
votes
1
answer
81
views
Reproduce the following flow-chart with smartdiagram in Tikz
I want to reproduce the following figure with tikz and smartdiagram.
This is what I got so far using the following code:
\documentclass[border=10pt]{standalone}
\usepackage{verbatim}
\usepackage{...
- 8,349
1
vote
0
answers
36
views
Design block diagrams or flow charts in latex
What is the best way or latex tools for writing block diagrams/flow charts?
Is there any general pattern/template for that purpose?
Thanks for assist,
Tommy
- 183
0
votes
0
answers
29
views
Block diagram or flow chart in latex
I wonder how to write flow chart or block diagram in Latex.
Please, see attached photo.
Thanks for help
Tommy
- 183
3
votes
1
answer
108
views
Centering a tikzpicture flowchart
I am trying to build up a PRISMA flow chart.
I found this excellent code by @Zarko and @Sergej in an old post:
\begin{tikzpicture}[
node distance=15mm and 10mm,
start chain=going below,
...
- 396
3
votes
1
answer
41
views
Naming shifted arrow in flowcharts
Hello i'd like to name the arrow on the left but in the center of its lenght
Here is the code I use
\draw [arrow] (dec2) -- +(-4,0) node[anchor=east]{Nie} |- (dec1);
recreatable example
\usepackage{...
- 33
0
votes
1
answer
66
views
How do you balance two frame boxes in the same page? [duplicate]
I have a problem with fitting two flowcharts encased in frame boxes to fit nicely within a single page and how do you add a little more bottom space to the box frame?
\documentclass[11pt,twoside, ...
- 83
0
votes
1
answer
43
views
How do you fit flowchart and two tables into one page [duplicate]
So I have this flowchart and two tables and I needed it to fit in one page. How do I do it?
Here's the code:
\documentclass[12pt,twoside, a4paper]{report}
\usepackage[utf8]{vietnam}
\usepackage{...
- 83
1
vote
1
answer
57
views
Drawing arrows on sides of a node
I'm stuck a little with TikZ, I've this example where I would like to add Yes /No arrows on the right and left sides of the Finished? block. So far, the arrows show over the block also the spacing is ...
- 227
1
vote
1
answer
49
views
How do I balance the text with the flowchart
So I have this normal text that is bordering 2 elements: section and the flowchart. The text unfortunately is close to the flowchart but I don't want that. The thing that I want is for the text to be ...
- 83
3
votes
2
answers
227
views
Why is my itemize line spacing so huge?
My other itemize doesn't have this problem so why does this have it?
Here's the code:
\documentclass[12pt,twoside, a4paper]{report}
\usepackage[utf8]{vietnam}
\usepackage{mathptmx}
\usepackage[margin=...
- 83
2
votes
3
answers
378
views
How to recreate this simple flowchart?
This flowchart has given me nothing but pain and frustration. I've been trying to recreate it for a few days and not been able yet. I use the tikz package.
- 83
0
votes
2
answers
53
views
How do I add text in a flowchart without a border and how do I move my chart to the right and un-attach my top text with the chart?
Greetings so like the title I have this code and I want you to help me with these problems:
\documentclass[12pt,twoside, a4paper]{report}
\usepackage[utf8]{vietnam}
\usepackage{tgtermes}
\usepackage{...
- 83
3
votes
2
answers
87
views
couldn't show flowchart with two libraries pstricks and tikz
I was trying to add some flowcharts to my Article, but I had some issues with that, with this code:
\usepackage{pstricks,pst-node}
\begin{center}
\begin{psmatrix}
& [name=nodo1,...
2
votes
2
answers
177
views
Position of arrow in tikz flowchart
I have the following tickz flow-chart but I want the arrow that goes from the "compute color features" node to stop at the right-hand corner of the "SVM and RF models" node. How do ...
2
votes
2
answers
184
views
Reduce the size fo a tikz picture
I have a flowchart created using tikz.
Example,
\documentclass[tikz, margin=3mm]{standalone}
\usetikzlibrary{backgrounds,
fit,
positioning}
\begin{document}
\...
- 457
3
votes
1
answer
75
views
How to make flowcharts blocks (predefined process etc) in pstricks
I want to make building blocks for program block diagrams, but I don’t understand how to make the following blocks: I/O block, Predefined process, Internal Storage, Loop Limit, Document, Stored Data, ...
- 31
3
votes
2
answers
192
views
Multiple arrows for connecting a pair of identical nodes
I have a flowchart as below. For arcs $p_7$, $p_8$ and $p_9$, the arrows are mixing with other arrows. How should I resolve this problem? Thanks.
\documentclass{article}
\usepackage{tikz}
\...
- 447
0
votes
1
answer
244
views
TiKZ Flowcharts for Deep Learning - LaTeX [duplicate]
I have been trying to create some Professionally looking flowcharts for my reports using latex. But, I don't find any online tools to generate a code for the flowcharts I make. I am guessing it should ...
- 43
0
votes
0
answers
174
views
How can I reduce the size of a flow chart?
I have created a rather large flow chart in the figure environment with Tikz. But now it no longer fits under my heading and is always generated on an empty page. But I need to force the flow chart ...
- 23
1
vote
1
answer
59
views
How to set straight line (horizontal) connector?
Please help me to set a straight line (horizontal) connector. Thank you in advance.
\documentclass[a4paper,11pt]{article}
\usepackage[edges]{forest}
\usepackage{caption}
% Source <------------...
- 117
2
votes
2
answers
170
views
LaTeX TikZ: Creating a sophisticated flow chart - How to create diagonal decision boxes?
I'm a LaTeX beginner and I'm struggling with creating a flow chart. I have the following code so far:
\documentclass[final, english]{scrreprt}
\usepackage{tikz,pgfplots}
\pgfplotsset{compat=...
- 23
8
votes
3
answers
385
views
Tikz: draw two paths between a pair of objects
I want these arrows to be parallel.
Why isn't yshift working the same way on the start and end of the path?
Is there a better way to choose locations on the boxes? Is there an anchor for halfway up ...
- 155
-1
votes
1
answer
175
views
How to create this flow chart directly in LaTeX?
Is it possible to create flow charts with forest or tikz?
- 11
2
votes
2
answers
235
views
Drawing irregular polygon around flow chart nodes
Could I please get some help on drawing an irregular polygon around flow chart nodes. I saw a manual way of drawing the polygons using a coordinate system but this is a bit impractical with flowcharts....
- 33
1
vote
1
answer
24
views
Help Required - regarding Arrows in flowchart
Can anyone help me with the code required to draw this?
- 11
1
vote
1
answer
87
views
Merging curved arrows in chemfig (or tikz?)
I'm fairly new to Latex and I've been using chemfig to draw a couple of diagrams so far, but for this one I'm trying to do I've not found a way. I haven't used tikz before, but it seems to me that it ...
- 59
4
votes
1
answer
151
views
Vertical and angled arrows in flowchart using TikZ
I'm trying to recreate something similar to this flowchart using TikZ:
This is my code so far:
\begin{figure}[H]
\centering
\resizebox{0.99\textwidth}{!}{
\begin{tikzpicture}[node distance=2cm]
\...
2
votes
1
answer
165
views
HOWTO use tikz to generate diagram to show organization of big proof (non-terminal nodes are lemmas, and other auxiliary propositions)
How to generate the following diagram (see page 4 of this document https://arxiv.org/pdf/2011.13661.pdf).
Notice that the text in red are actually clickable links. Also, ideally I'd like the solution ...
- 168
1
vote
1
answer
80
views
Auto-alignment for flowchart with multiple output blocks
Auto-alignment for flowchart
How to make auto-alignment, if the text in the block "blows" it and its dimensions are beginning to interfere with other blocks (and with multiple output blocks, ...
- 165
1
vote
0
answers
68
views
Software for drawing LaTeX flowcharts and control system diagrams [duplicate]
Tell me the full program software for drawing LaTeX diagrams and control systems schemes. For example:
I know TeXample and Overleaf, but I own it badly, because writing these schemes in the ...
- 165
2
votes
2
answers
257
views
Compartmental diagrams in latex [closed]
I drew my compartmental diagram in Microsoft office word, used a snipping tool to capture the diagram and later transferred it to latex using using \includegraphics. However I have been instructed by ...
0
votes
1
answer
82
views
How to draw a flow diagram of this sort
I want to draw this diagram:
I have the following MWE (its not complete):
\sf
\begin{tikzpicture}[node distance=2cm, on grid]
\tikzset{
mynode/.style={circle, draw,minimum ...
- 455
0
votes
1
answer
43
views
How can I draw or define these node styles with tikz for a flow chart?
I want to define node styles like this:
% Preamble: \usetikzlibrary{shapes.geometric}
entrada/.style={
trapezium, trapezium left angle=70, trapezium right angle=-70,
draw=some color, ...
4
votes
2
answers
368
views
How to build good flowcharts
I used the sample https://texample.net/tikz/examples/consort-flowchart/ to build a flowchart. I have some problems, that it looks good.
Text 1 - The shape has to move up, that there is no konflict ...
- 57
0
votes
2
answers
75
views
Drawing a loop diagram with nodes
Ok, I have another question. I can make a loop diagram with the matrix way:
However working with nodes seems way more convenient, this is my code:
\documentclass[12pt, letterpaper, twoside]{article}
\...
- 77
0
votes
2
answers
90
views
How to draw complicated arrows in a big flowchart and also how to maintain the size of the whole thing in an article?
I have been trying to draw a big flowchart inside my article. I have managed to draw most of it but got stuck in some places.
First, I can't draw the arrow marked in red in the image. I tried to use ...
- 109
1
vote
2
answers
253
views
Flow Chart with TikZ Feedback arrow
I want to add to my tikz diagram an additional feedback edge (positioning it in the right part of the figure) that goes from the terminal node (mecon2) to the initial one (mecon). However, since i ...
- 13
1
vote
2
answers
101
views
Special flowchart drawing
I need following flowchart in my paper.
how can i draw it?
1
vote
1
answer
140
views
Moving arrows down in tikz diagrams
I try to create a "reaction scheme" using the tikz environment. Here is a part of the code:
\node (Ba2+) [compound] {\ce{Ba^{2+}}};
\node (BaSO4) [compound, right of=BaO, xshift=1cm] {\ce{...
- 29
1
vote
2
answers
123
views
Improve A Tikz Flowchart
How can I add the circles as shown in the above flowchart so I can number each process? Now my optimum goal is to show a process using a flowchart and describe each box under the flowchart so I came ...
- 1,201
1
vote
2
answers
145
views
Specific Flowchart in beamer
I am creating a beamer presentation, and I need to summarize my work by using flowchart
I try to use word to do it and insert as .png but I'm not happy with the result, it is not clear.
So I try to do ...
- 13