Questions tagged [flow-charts]

A flow chart is a special type of diagram representing a workflow, process or algorithm.

Filter by
Sorted by
Tagged with
27
votes
4answers
14k views

How to typeset flowcharts in LaTeX?

I know that it can be done with graphics packages like TikZ, but it seems to be a bit of an overkill. And for those not already familiar with the TikZ system, learning it can be a bit of a barrier. So ...
12
votes
1answer
2k views

Simple flowchart in latex

This is the flowchart I want to draw, and there are some problems: The chart doesn't set in the center How to begin a newline of words in the rectangle and above the arrow How to make the length of ...
11
votes
1answer
907 views

Complicated Flow Chart

I am now learning to create a flow chart for my thesis. But I faced quite a lot of problems and wasted a whole day on it. I want to replicate a flow chart below and i am working hard with the latex ...
8
votes
3answers
343 views

Tikz: draw two paths between a pair of objects

I want these arrows to be parallel. Why isn't yshift working the same way on the start and end of the path? Is there a better way to choose locations on the boxes? Is there an anchor for halfway up ...
7
votes
3answers
264 views

Draw a commutative diagram - compiling error

I have seen this post for writing commutative diagrams, needed for a chemistry purpose. When trying that latex returns an error. I couldn't get what's going on. Below there is a MWE \documentclass[...
7
votes
2answers
1k views

How to create the following flowchart?

I want to create this Here is my MWE: \documentclass[border=10pt]{standalone} \usepackage{verbatim} \usepackage{tikz} \begin{document} \begin{tikzpicture}[sibling distance=10em, every node/.style =...
7
votes
2answers
1k views

Header in tikz container for flowchart

I want to create a flowchart using tikz. My desired flowchart is as in attached figure below. My questions are: Is it possible to add header to 'container'? I can not create the header I want to ...
6
votes
1answer
754 views

LaTeX Flowchart: Connect from diamond to far off rectangle

I am trying to connect from the first diamond to the first rectangle of the second column. My code is below. Please help me to fix this problem. \documentclass[12pt,a4paper,titlepage,twoside,...
6
votes
1answer
982 views

Flow Chart (Closed Chevron Process) in Beamer

MS Powerpoint has this neat flowchart: Because everything I ever needed so far could be done with TeX (just not by me), I really do hope that somehow this can be added in a beamer presentation as ...
5
votes
3answers
3k views

Basic layout of flow chart in LateX

I created the follow (basic) flow chart: with the following code: \documentclass[11pt]{article} \usepackage{tikz} \usetikzlibrary{calc,trees,positioning,arrows,chains,shapes.geometric, decorations....
5
votes
3answers
284 views

Reproduce diagram relating different continuity properties

I want to reproduce the following diagram as one of the implications is wrong and I want to add some and see if I can manage without having certain terms twice in the diagram (i.e. "stetig"). I tried ...
5
votes
2answers
1k views

Marking intersection of two lines with a semicircle with no fill

I am trying to create a process flow diagram of my rig using LaTex but I am stuck at trying to figure out how to create a semicircular jump at the intersection of two independent lines in the drawing. ...
5
votes
2answers
334 views

coding the arrow's path in flowchart

I made some changes to Zarko's code from here to make my own flowchart. \documentclass[a4paper,11pt,twoside]{book} \usepackage[a4paper,left=2.5cm,right=2.5cm,top=2.5cm,bottom=2.5cm]{geometry} \...
5
votes
1answer
927 views

Flow chart document symbol

I am doing an old-style flow chart with TiKz, and I am defining my nodes with the \tikzstyle command (example \tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=1cm,...
5
votes
2answers
2k views

Problems with flow chart - decision tree

I am creating a decision tree with flow chart in the using the tikz-package. A MWE is as follow: \documentclass{article} \usepackage[latin1]{inputenc} \usepackage{tikz} \usetikzlibrary{shapes,arrows} \...
5
votes
1answer
116 views

Flow chart questions

I just started using LaTex and this is my first try on drawing a graph. I've encountered some problems and these are my questions: May I know how can I position M,Q and E on the arrows "above" and "...
5
votes
1answer
202 views

Climate flow chart

I am trying to draw the following "flowchart" After some fiddling I was able to come up with the following solution What I am struggling with mainly boils down to two things How can I align the ...
5
votes
1answer
3k views

Flowchart using TiKz - connecting arrows

Here is flowchart drawn using TiKz. I'm trying to connect the arrows in a clean way. For instance, I want to connect box3.west to retF.south and box2.east to retT.south. I would like to have the arrow ...
5
votes
0answers
1k views

Tikz automated layout of nodes and routing of edges for complicated flow diagram

I have a master, "all-encompassing" (but non-standard) flow-diagram on the whiteboard to explain a methodology to readers of a journal article that I am writing. The problem is that I am unsure of ...
4
votes
2answers
1k views

Drawing a complicated Flow Chart (diagram) in Latex

I am relatively new to drawing a flow chart in Latex. Started with this: \documentclass{article} \usepackage[utf8]{inputenc} \usepackage{tikz} \usetikzlibrary{shapes.geometric, arrows} \tikzstyle{...
4
votes
2answers
1k views

unable to create a flow chart in Latex

I am trying to create a flow chart diagram in latex. I have attached the flow chart diagram below. Can anyone help me? This is what i have tried. I am able to draw line from node to node but unable ...
4
votes
1answer
1k views

Drawing a database flowchart in Latex

I am working with a database and want to create a flow chart which shows how many cases are lost as I apply each filtering criteria. In short I want to generate an 'old school' flow chart as appears ...
4
votes
1answer
102 views

Vertical and angled arrows in flowchart using TikZ

I'm trying to recreate something similar to this flowchart using TikZ: This is my code so far: \begin{figure}[H] \centering \resizebox{0.99\textwidth}{!}{ \begin{tikzpicture}[node distance=2cm] \...
4
votes
2answers
353 views

How to build good flowcharts

I used the sample https://texample.net/tikz/examples/consort-flowchart/ to build a flowchart. I have some problems, that it looks good. Text 1 - The shape has to move up, that there is no konflict ...
4
votes
1answer
217 views

Creating phases in flowchart using tikz

I want to separate the flowchart into phases by adding the red items. Any idea how to do it? This is the code for my current flowchart. \documentclass{article} \usepackage{tikz,tkz-berge,tkz-graph} \...
4
votes
2answers
2k views

Move whole flowchart diagram left of the page when using Tikz

I am creating a flowchart using Tikz. Where under the main block, three blocks will share the equal space. I have tried with this \documentclass[11pt]{article} \usepackage[utf8]{inputenc} \usepackage{...
4
votes
1answer
145 views

How can I convert a word flow chart (shown in photo) to latex?

I'm trying to use the "\usepackage{smartdiagram}" but I've some difficulties. this is the code that I worte up to now: \documentclass[12pt]{report} \usepackage{smartdiagram} \...
4
votes
2answers
1k views

Getting an error from packages PGF and TikZ when creating flowchart

I need to connect (dec1) to (pro6) nicely. When I compile the code, I get this error "Package PGF Math Error: You asked me to calculate `1/0.0', but I cannot divide any number by zero. \path [line] (...
3
votes
2answers
1k views

Draw a flowchart with LaTeX

I know it is not good to ask this question. But I am out of time and idea how should I start? My supervisor ask me to use LaTeX than document for this figure below which I had draw in .doc file.
3
votes
4answers
489 views

minimal looking chapter dependency wheel

I want to generate a very simple looking chapter dependency figure, something like the image below. Could someone point me in the right direction of how to do thism or what package generated this oen ...
3
votes
3answers
954 views

How to draw Flowchart Summing junction using tikz

How to draw following symbol using tikz? And why isn't there a standard package which will have all necessary and commonly used shapes in flowcharts. Even existing flowchart package has very less ...
3
votes
2answers
1k views

Add a dash box in the flowchart

Those are the three flowcharts I want to draw, and there are some problems: How to add the Dashed Box and Cross in the third picture. I don't know how to add the rectangle Bond worth P in the first ...
3
votes
2answers
185 views

Multiple arrows for connecting a pair of identical nodes

I have a flowchart as below. For arcs $p_7$, $p_8$ and $p_9$, the arrows are mixing with other arrows. How should I resolve this problem? Thanks. \documentclass{article} \usepackage{tikz} \...
3
votes
3answers
507 views

smartdiagram: Adding extra arrows and symbols in flow diagrams

I want to produce the following flow chart with smartdiagram and need some hints how to draw extra arrows and symbols. So far I got this one with the following code \documentclass[border=10pt]{...
3
votes
4answers
763 views

How to make a flow chart with the arrows across the box?

I want to draw a flow chat like this But I have no idea how to make those arrows across the box, and make the boxes larger. \documentclass{beamer} \usepackage{amsmath} \usepackage{tikz} \usepackage{...
3
votes
1answer
352 views

flowcharts within flowcharts

Here is a flowchart-type graphic that I would like to remake with TikZ. In principle, I know how to do these things, using \node (a) at (1,2) { text }; and \draw (a) -- (b); commands. However, I'm ...
3
votes
3answers
3k views

Creating diagrams with LaTeX or R

I'm, trying to create an horizontal diagram (like the diagrams you can create with Visio but programatically) in R (to embed it in a LaTeX document) or directly in LaTeX. So far I've been reading ...
3
votes
2answers
236 views

Summarize a set of equations with arrows, boxes and circled numbers

I have a set of equations summarized in this way: The code that produces this is the following: \documentclass[12pt]{article} \usepackage{empheq} \usepackage[left=2.5cm,top=2.5cm,right=2.5cm,...
3
votes
2answers
289 views

Help creating simple diagram

I want to create a little diagram that looks like: with $\implies$ (double-lined arrow) for the arrows. And I'd like to be able to write things on the arrows if possible. How can I do this? I've ...
3
votes
1answer
1k views

Infectious disease compartmental flowchart on beamer using TikZ

I wanted to draw Remark: The numbers on the diagram are not the part of the code. They show the sequence of precedence of the moving arrow. MWE by editing this code: \documentclass{beamer} \...
3
votes
1answer
726 views

Creating a flowchart for a proof

I am doing a seminar talk soon, which will consist only of proving one complicated theorem. The proof involves several steps and it's hard to keep track of what's going on. For this reason I want to ...
3
votes
1answer
730 views

Multi input block diagram using TikZ

i want to create a block diagram that has multiple inputs into the next block, but do not seem to be able to get it to work at all. I would like to produce it like: This is what i have right now: \...
3
votes
1answer
884 views

Horizontal timelines chart

I am trying to re-create the following horizontal timeline chart. I found some related examples, but nothing really close to do what I need (also perhaps for lack of correct naming of the chart ...
3
votes
2answers
233 views

Drawing arrows using tikz

I am trying to make a flow chart using tikz package. My code is: \documentclass{article} \usepackage{tikz} \usetikzlibrary{arrows,calc,positioning,shapes.geometric} \tikzstyle{intt}=[draw,text ...
3
votes
1answer
313 views

tikz 'flow chart'/protocol diagram with no hard coded postions

I'm trying to create a particular style of flow chart/ protocol diagram. This seems readily doable with tikz, but I'm having no luck figuring out how to get tikz to even attempt to do what I want. ...
3
votes
2answers
103 views

I want to render a "flow chart" diagram, where arrows go between symbols (from one box to another) and not between boxes

I want to render a diagram that's like a flow chart, but where arrows go between a symbol in one box to a symbol in another box (as opposed to having an arrow that points from one whole box to another ...
3
votes
1answer
89 views

Tikz flow chart nodes not aligned

Example: \documentclass[tikz,border=1cm]{standalone} \usetikzlibrary{matrix, shapes, arrows, positioning} \usepackage{xcolor} \begin{document} \begin{figure} \begin{center} \tikzset{% ...
3
votes
1answer
896 views

Importing wide flowchart into twocolumn document

I have created this flowchart in a external LaTeX document. flowchart.tex \documentclass{article} \usepackage[utf8]{inputenc} %%%< \usepackage{verbatim} %%%> \usepackage{tikz} \...
3
votes
1answer
1k views

Undefined control sequence in TikZ flowchart

I have two flowcharts in my document with the following code. The problem is that I can compile the flowchart alone but when I repeat the code for a second flowchart it doesn't compile anymore. I get ...
3
votes
2answers
401 views

How to draw non-straight arrow in tikz and reduce a shape's width?

I have the following chart in tikz. I need to draw an arrow that starts horizontal then goes vertical from the decision shape to the end with label no. I have tried using -| instead of -- but this ...