Questions tagged [fourier]

{fourier} is for questions addressing issues related to the Fourier-GUTen­berg typefaces.

Filter by
Sorted by
Tagged with
2
votes
0answers
56 views

adding microtype package produces invalid DVI error when using fouriernc package

This MWE \documentclass[11pt,notitlepage]{article} \raggedbottom \usepackage{fouriernc} \usepackage[T1]{fontenc} \usepackage[activate={true,nocompatibility},final,tracking=true, ...
0
votes
1answer
91 views

Use Utopia greeks with unicode-math

Is there a way to use TeX Gyre Pagella Math as the math font in a LaTeX document and substitute Utopia greeks? I knew how to get a mix of Palatino and Utopia with the pdftex engine by appropriately ...
1
vote
1answer
28 views

How can I use the standard computer modern font while still using the Fourier package symbols?

I am using the Fourier package in order to have access to its symbols, but it changed the fonts in my document. I wish to be able to use its symbols while maintaining the standard font I had ...
2
votes
1answer
58 views

How to get delimiters of the same size when using fourier?

Consider the following MWE: \documentclass{scrartcl} \usepackage{mathtools} \usepackage[upright]{fourier} \begin{document} \begin{gather*} \sigma_i+\sigma_n\geqslant\tau\left[\nu_{\sigma}^{Q}...
2
votes
0answers
103 views

Should one use fourier with erewhon?

Consider the following MWE. \documentclass[a4paper]{scrartcl} \usepackage{fourier} \usepackage{erewhon} \begin{document} This is my offer. \end{document} The output looks as follows: If ...
10
votes
2answers
389 views

Fourier font and enumitem misbehaviour

Consider the following MWE: \documentclass[a4paper]{scrartcl} \usepackage{enumitem} \usepackage{fourier} \begin{document} \begin{enumerate}[labelindent=10pt,labelwidth=0pt,labelsep=30.5pt,...
1
vote
1answer
49 views

How to change the scale of main text without affecting math text or viceversa?

I'm using libertine package for the main text of my work and I load fourier package before libertine in orther to get the math text with the Utopia font just because I like it. Typing \documentclass{...
5
votes
2answers
202 views

Mathastext: Wrong digits in math-mode

I'm using fourier and erewhon as my main (serif) text and math fonts. I want to use TeX Gyre Heros as sans font. Because this font has no math support, I use mathastext to fake it only for the sans ...
0
votes
0answers
25 views

Error Conflict between fourienc package with amsmath pakage

I type a below document using fourienc package and amsmath package \documentclass[12pt,a4paper,oneside]{article} \usepackage{amsmath,amsfonts,txfonts,ulem} \usepackage{fouriernc} \usepackage[utf8]{...
0
votes
1answer
106 views

Same font for variable in \mathit and regular math mode [closed]

I'm trying to have the same font for the p in \mathit (or \textit) (the idea is to have a multiletter variable) and the single p, with mathpazo and fourier. \documentclass{article} \usepackage[sc]{...
6
votes
3answers
209 views

How to get one italic Greek letter in math mode when using the upright option with Fourier?

Consider the following MWE: \documentclass{article} \usepackage[upright]{fourier} \begin{document} As $\rho\rightarrow1,000$, we all die. \textit{As $\mathit{\rho\rightarrow1,000}$, we all ...
2
votes
1answer
310 views

Problem with fourier font using xelatex and lualatex

I have a problem with œ and Œ unicode characters using fourier with xelatex and lualatex. When I compile with pdflatex (with [T1]{fontenc} and [utf8]{inputenc}) everything is ok. \documentclass[...
0
votes
1answer
598 views

Problem with Fourier package [duplicate]

I want to use the Fourier package for my personal LaTeX class but when MiKTeX wants to install it, it did not succeed... When compiling my minimal document, MiKTeX echoes me an error message (...
1
vote
1answer
916 views

fouriernc vs. fourier

As far as I can tell from the documentation, \usepackage{fouriernc} should set up NC Schoolbook, from the fourier package, as the front for the main text with a suitable font for math. So I expect a ...
1
vote
1answer
66 views

Is there a way to copy the symbol in TeX.SE in my book header?

I am referring to the one right below TEX : MWE : \documentclass[11pt]{book} \RequirePackage{luatex85} \usepackage[paperwidth=142mm, paperheight=210mm,top=25mm, bottom=20mm, left=17mm, right=22mm]{...
1
vote
1answer
450 views

Incompatibility of lmodern and fourier?

Using the lmodern package, I had the typical font size issues in math mode: for example the sums were not large enough in some of my equations. To solve this I followed egreg's answer to the following ...
2
votes
1answer
40 views

perltex fails when using fourier package macro expression as argument to perl macro

After some search for errors, I have defined the following little example to show my issue. The command perltex can nicely translate the following document: \documentclass{article} \usepackage{...
2
votes
1answer
259 views

problem with fourier font

i use fourier font for my math in my document but definitions, theorems,.. are not bold and when i write english names they are in bold (my text is in greek). Also i want to know what i have to do to ...
3
votes
1answer
372 views

Redefine \frac with Italic Numbers

I'd like to get fractions as they appear below (from Improved kerning in fractions?): However, my current code typesets them as follows: Here is a MWE that reproduces these fractions. \...
7
votes
1answer
668 views

How to get All Math Numbers in Italics?

I am currently trying to get all numbers in math mode in italics. However, I find no way of re-defining the numbers 0,1,2,3,4,5,6,7,8,9 to make them italics as long as they are in a math environment. ...
5
votes
1answer
412 views

Import one symbol from `fourier`

I use pxfonts but need the symbol \danger from fourier. The answer to this question explains how to load from fourier just one symbol. Unfortunately, I am unable to adapt the solution to my case.
0
votes
0answers
239 views

What is the process of installing the packages required to use the fouriernc?

Using this answer to typeset the tall brackets Big Parenthesis in an Equation I included the fouriernc package but could not compile due to the following error in /AppData/Local/MiKTeX/2.9/miktex/log/...
4
votes
1answer
132 views

siunitx with fourier result in no more \micro prefix

\documentclass[french]{article} \RequirePackage{fourier} \RequirePackage{fontspec} \usepackage{siunitx} \sisetup{% unit-mode = text,% locale=FR,% detect-all,% Problème avec ...
1
vote
1answer
321 views

How can I build a LaTeX file with fourier-ms? [closed]

I am trying to compile the following file with pdflatex. \documentclass[10pt]{book} \usepackage{fourier} \begin{document} $p<0.05$ \end{document} I get the following error. kpathsea: Running ...
0
votes
2answers
316 views

How can I get the regular \mathbb and the kpfonts' \mathfrak using fourier?

I need to get the regular \mathbb style (the resulting one only using \amsfonts) and the kpfonts' \mathfrak style using the package fourier. Thanks.
3
votes
1answer
69 views

breqn corrupts fouriernc in TL 2016

Finally, when I think I found a font I like to use, I find that breqn package corrupts it when using bmatrix and other such constructs from amsmath. This is so annoying. \documentclass[]{book} \...
1
vote
0answers
414 views

`\hbar' already defined error when using fourier-orns.sty with lualatex

This MWE \documentclass[]{book} \IfFileExists{luatex85.sty}{\usepackage{luatex85}}{} \usepackage{fontspec} \usepackage{fouriernc} \begin{document} test \end{document} Gives the error lualatex ...
1
vote
1answer
298 views

error using fourierenc with koma script class \nobreakspace unavailable in encoding T1

I used 4 lines code from this answer chapter-number-and-chapter-title-in-one-line Which works very well as is. I just changed to new font, and find now I get strange error. When I remove the new ...
1
vote
1answer
143 views

Problem using siunitx with fourier in TikZ

For my reports I'm using both the packages fourier and siunitx at the same time. I recently noticed that units automatically enclosed in brackets using the library units for pgfplots are shown in a ...
2
votes
1answer
342 views

Bold math with siunitx, fourier and amsmath problem

With this configuration I can't have bold siunitx otherwise than using \pmb, but with an ugly side effect : \documentclass[margin=5pt]{standalone} \usepackage{fourier} \usepackage{fontspec} \...
4
votes
1answer
707 views

Correct way of using Vollkorn for both text and math

I'm trying to use Vollkorn typeface for both text and math. I want Greek letters to be italic in math mode and to use Vollkorn. In addition I need some symbols from fourier package. I have tried this: ...
6
votes
1answer
836 views

Sinunitx, fourier, euro, utf8 problem

In this MWE, I can't have € in math mode since I've updated siunitx package. Before it worked fine. I found that take the fourier package off make it work again \documentclass[border=3pt]{standalone}...
1
vote
1answer
101 views

Would like to make braces larger using Fourier package

in my MWE below, I wanted to know if it is possible to make the "{ }" larger like this (while still using the fourier package): Here is my code: \documentclass{article} \usepackage{fourier} \...
1
vote
1answer
955 views

Fourier package causes equation to not show up properly

In the MWE below, I do not get the equation to show up properly. This is how it shows up: when this is the equation: E(T) = C_{1} + C_{2}f_{1}[p(t)] + C_{3}f_{2}[T(t)] + C_{4}f_{3}[p(t),T(t)] + v(t)...
3
votes
2answers
264 views

makeindex and fourier's mathbb

In the example document below the second index entry produces the warning !! Input index error (file = j.idx, line = 2): -- Extra `@' at position 11 of first argument. on running makeglossaries ...
5
votes
1answer
196 views

Right place for ddots

I've got a problem, when making a presentation with beamer. I want to use the fourier package for the fonts, and use the serif font in math mode. So that's an MWE: \documentclass{beamer} \usepackage{...
0
votes
1answer
1k views

Problem with fourier package, the text disappears

I have decided to change font and heard about the fourier package. I thought I just had to type \usepackage{fourier} for it to work but the text then completely disappeared. Here is the document ...
2
votes
1answer
3k views

texlive lineo and fourier packages for CentOS 7? [closed]

On a system recently installed with a fresh copy of CentOS 7, I attempted to compile some LaTeX documents and was met with missing LaTeX packages. After installing some basic distributions using the ...
0
votes
0answers
572 views

utopia font type in fourier package shrinks my document

I would like to use the utopia font found in the fourier package, but when I add \usepackage{fourier} a 5 page document shrinks quite a lot, even though I'm using the same font size! The problem is ...
2
votes
1answer
2k views

Vertical Fourier and Laplace “club” symbols

The trfsigns package provides macros for transformation signs, eg: \fourier and \laplace. I need a vertical version of those symbols.
0
votes
0answers
55 views

checksum mismatch in font futr8t.vf ignored [duplicate]

With this MWE : \documentclass{beamer} \RequirePackage{fontspec} \usefonttheme{serif} \RequirePackage{lmodern} \RequirePackage{fourier} \beamertemplatenavigationsymbolsempty \RequirePackage{...
5
votes
2answers
656 views

Fourier Spectrum conversion from 3D to 2D

I am delighted to have the link ORIGINAL LINK However, I have modified the graph to suit my purpose but it's still in xyz-plane. Actually, I want to have the same graph in xy-plane. My MWE is as ...
4
votes
1answer
258 views

Bad horizontal spacing when using the fourier/utopia font

Consider the following MWE: \documentclass{article} \usepackage{fourier} \begin{document} If \(0<b<1\). \emph{If \(0<b<1\)}. \emph{If 0<b<1} \end{document} that yields the ...
5
votes
1answer
586 views

fourier: How to get slanted lower and upper case Greek symbols by default

The fourier package has an option to slant lower case Greek; the upright lower case Greek symbols are then available as \other<symbol> macros. It seems upper case Greek symbols are always ...
6
votes
1answer
632 views

Using 10pt fonts with the fourier package actually gives me 9.17pt

I am using the fourier package to produce output (containing math) that I can insert into another document using the same (Utopia) font and have matching text styles. But when I set the font size to ...
4
votes
1answer
562 views

Making integrals look prettier with negative spacing for publication

How should I write definite integrals for publication? Examples: or or I am not sure about how to write the limits correctly. How should I write definite integrals for publication?
10
votes
1answer
2k views

Using computer modern \rightarrow with fourier font

I am using the fourier font in a LaTeX document, but instead of the \rightarrow that fourier provides, I need the Computer Modern right arrow. For example, I need instead of: I have tried using \...
2
votes
1answer
1k views

mathtools' \vcentcolon and fourier's utopia

The mathtools package has a centered colon, \vcentcolon, which is used to display the definition symbol := correctly. However when using the fourier package, I get the following output from $:\...
4
votes
1answer
597 views

fourier font and \nmid

The fourier package does not provide a \nmid command. Using the \nmid from amssymb looks very different from the fourier's \mid. Is there a way to produce a "compatible" symbol in fourier? The two ...
5
votes
1answer
334 views

Setup font size of different types to be the same

For mathematical documents i like using the fourier package with the upright option, however the symbols \mathcal produces are quite too quirky in my opinion, so I replaced them with the default font ...