Questions tagged [frame-title]
Any questions related to \frametitle
179
questions
1
vote
1
answer
30
views
Beamer cambridgeUS section and subsection not enough space
I'm writing a latex Beamer file, and I got some problems when setting the section & subsection. The space is not enough to display my text. I want to increase the scope to include the text, rather ...
- 25
0
votes
1
answer
27
views
How to set subtitle box under frametitle visible in beamer?
I am using this custom beamer style
but it needs a tiny modification to work robustly. It is fine when we have no subtitle for frame
\begin{frame}{Introduction}%{My Title}
some text about Latex
\...
- 319
0
votes
1
answer
83
views
How to recreate this lecture command?
Im trying to create a lecture command which will allow me to insert the lecture number which will be used to number sections, figures, and etc, and which will allow me to name the lecture. I also want ...
- 69
0
votes
1
answer
25
views
Why is there a colon in the title of a definition environment generated by "newtcbtheorem"?
I'm trying to adapt this template for my lecture notes.
Could you explain why there is a colon in the Definition 0.1: Markov chain whereas there is not in Theorem 0.1 Ohlala?
To be minimal, I would ...
- 157
1
vote
1
answer
36
views
beamer, titlepage, logo and horizontal line
I have a beamer presentation, where here (font and position of frametitle text)
I got help defining the correct frametitle environment.
Now what I would like to have is the horizontal line and the ...
- 125
1
vote
1
answer
34
views
font and position of frametitle text
Based on the answer in this thread:
horizontal line below frametitle and framesubtitle on beamer slides
I copied and modified it a bit, however what I would be needing is (as in the picture below) to ...
- 125
2
votes
2
answers
131
views
1
vote
1
answer
29
views
Place beamer frame title into parallelogram at top left corner
I am trying to place the title of each frame in a parallelogram that adjusts to the length of the title. I want the parallelogram to start at the same position of each frame, for example, at the top ...
- 13
1
vote
1
answer
52
views
Vertical coloured title with mdframed
I'm trying without sucess to make an environment like this:
What I have know is this:
The perfect answer to this question would be a way to have the title in colors and text out of the mdframed ...
- 553
0
votes
1
answer
30
views
Simple way to have same height position for all titles in beamer
This is a general question in order to know if there is a simple way to have all the \exampleblock titles being on the same height in a beamer presentation ?
For instance, for 2 different templates, I ...
- 413
1
vote
1
answer
17
views
Why do I get a sort of strip passing through the frame title when using the dvipsnames option of xcolor in beamer? [duplicate]
Consider the following minimal example:
\documentclass[9pt, xcolor=dvipsnames]{beamer}
\mode<presentation>
{
\usetheme{Frankfurt}
\usecolortheme[named=OliveGreen]{structure}
}
\begin{...
- 1,556
0
votes
0
answers
39
views
How to make 'allowframbreaks's total continuation count' compatible with 'remove some pages from the navigation bullets'
From How to remove some pages from the navigation bullets in Beamer? and How do I insert the total continuation count in the allowframbreaks frame title?, I can solve two problems respectively: make ...
- 1
2
votes
0
answers
51
views
frame does not appear in xelatex
I'm new in Xelatex, I'm trying to write a text with arabic font so I used polyglossia package and everything is okay but when I worked with titlesec the frame is not appearing if I used arbic or ...
- 108
0
votes
1
answer
250
views
Change position of title and text in a beamer titlepage
Currently I am working in a presentation and this is the code that generates my titlepage:
\documentclass[10pt]{beamer}
\usetheme[progressbar=frametitle]{metropolis}
\usepackage{appendixnumberbeamer}
...
- 471
1
vote
1
answer
44
views
Customize the title of the frame with a logo in beamer
I am trying to add a logo and have a vertical gradient in each frame title on my presentation. In the end, I would like to have this type of frame:
I have tried this code: \begin{frame} \frametitle{...
- 45
2
votes
1
answer
40
views
Changing typesetting if frame subtitle exists
I wanted to change the typesetting of my frame title and frame subtitle in Beamer, and ended up using the following code:
\begin{center}
{\fontsize{14}{15}\selectfont\sffamily\bfseries\...
- 185
1
vote
1
answer
65
views
Customized underline below frame titles
I would like to have frame titles underlined exactly as long as the title runs and hopefully be able to have different colors for the title and the line. For now I have,
\documentclass{beamer}
\...
- 11
0
votes
0
answers
17
views
Footnotes duplicated with overlays and `show notes on second screen`
When attempting to add a footnote to a frame title, the footnote is duplicated if show notes on second screen is set.
\documentclass{beamer}
\setbeameroption{show notes on second screen}
\begin{...
- 121
0
votes
0
answers
79
views
How remove subsection for a specific frame in latex-beamer
hi guys I hope you are doing well I'm building a presentation using beamer latex, and I want to remove the bar in the header where the name of the subsection is shown just for specific frames
these ...
0
votes
1
answer
47
views
Indentation Wrong Second line in Titleframe Goettingen theme (Beamer)
I'm coming here looking for help because I've tried in every way to correct the error in the attached figure. When dealing with a long title, the second line suffers an unnecessary indentation. I ...
0
votes
1
answer
40
views
Indentation in Beamer Frametitle [duplicate]
I'm coming here looking for help because I've tried in every way to correct the error in the attached figure. When dealing with a long title, the second line suffers an unnecessary indentation. I ...
2
votes
1
answer
416
views
How do I add a frame title specifying the section and subsection names whenever a new subsection come up?
I'm very new to StackExchange, let alone LaTeX. The issue here is temporarily adding a frame title to whichever frame comes right after a new subsection is defined. Following is a sample code with an ...
- 31
0
votes
1
answer
215
views
customize title page on beamer
I found this beamer theme and I only need the title page because I already used the default theme. How can I extract only the title page from this theme?
- 115
0
votes
1
answer
90
views
Beamer frametitle always uppercase for text but not for href or url
I have a \citebutton command that I often use in the frametitle to link to some sources. Furthermore, I want to force the frametitle to be always in uppercase.
Unfortunately, I am not happy with my ...
- 164
0
votes
2
answers
133
views
Beamer: Add small text in frametitle
I am using Beamer and wanted to add small text in the heading of the frame like the below image ('Pre-proposal work')
Any ideas on how to do it?
- 237
1
vote
1
answer
168
views
Vertical centering text in frametitle in beamer
I have a picture and text in my \frametitle in Beamer. I put them next to each other through \tabular.
Now I'm wondering how can I vertically center the text and the image relative to the blue ...
- 169
1
vote
1
answer
128
views
Vertically align separation line between title and subtitle
I am desperately trying to (1) vertically align title and subtitle of a titlepage whilst (2) creating a separation line exactly between title and subtitle. This is what I've got so far:
The vertical ...
0
votes
1
answer
148
views
Define second frametitle command
When creating slides with beamer, there are two cases of frame titles I would like to use:
The frame title is centered and displayed in one line, irrespective of \textwidth or \linewidth.
The frame ...
2
votes
1
answer
68
views
\ul collapses the frame title to a black bar
I'm trying to underline all frame titles in Beamer in the same manner as my title page:
However, instead of the intended result, I get a black bar/square where the frame title was supposed to be.
A ...
- 21
0
votes
0
answers
12
views
Missing space key in frametitle of beamer [duplicate]
Why is there a space ' ' missing in the title, although I wrote \frametitle{\insertsection - \insertsubsection} with the equivalent space.
Here is my MWE:
\documentclass{beamer}
\usetheme{Boadilla}
\...
- 1,129
0
votes
1
answer
72
views
Keep frame title position fixed while adding logo to frame title
I am studying the answers to this question Beamer, adding logo to frame title
The solutions use height=0.45cm in which case everything is fine. I considered this height too small, so I enlarged it. ...
- 7,333
1
vote
1
answer
26
views
Conditional statement on framesubtitle: unwanted effect
I want to get something like this:
(a) frametitle
or
(b) frametitle | framesubtitle
But the following codes add | after every frametitle with/without framesubtitle, Anyone could help me? What's going ...
- 267
0
votes
1
answer
73
views
I want to display frametitle+continued but it's showing frametitle+RomanNumbers from second page of a frame while using framebreaks in ppt
I would like to replace the numbering of allowframbreaks frame with continued...,but fail to find out a command for this. For framebreaks I've used the command \begin{frame}[allowframebreaks]{...
1
vote
0
answers
74
views
unable to find where to reduce the top space after frame title in latex beamer class [closed]
\documentclass[xcolor=dvipsnames, aspectratio=169, 11pt]{beamer}
\usepackage{beamerthemeshadow}
\usepackage[absolute,overlay]{textpos}
\begin{document}
\section{Components of Figure}
\begin{frame}
...
- 85
0
votes
2
answers
74
views
How can I center an image in the frametitle?
I'm using the metropolis theme in Beamer and I would like to center (in the space) a house image in the frametitle. How could I do that? Below there is a MWE.
Thanks a lot.
\documentclass[t,...
- 1,455
0
votes
1
answer
532
views
Title too long in Beamer presentation
I have a long title for my presentation that goes out of the frame. If I try to separate it with '\' then the second line has a different format as the first line. I think I should change settings but ...
2
votes
2
answers
83
views
Disable hyphenation in Metropolis' frametitles
How do I disable hyphenation in in the otherwise very nice Beamer theme Metropolis? I have tried looking through all of Metropolis' code relating to the frametitle, but I can't figure out what ...
- 978
1
vote
0
answers
93
views
Beamer Slide Title Is Not Centered [duplicate]
The photo below describes my question. I checked but could not find a duplicate question
\documentclass[12pt, xcolor=dvipsnames]{beamer}
\beamertemplatenavigationsymbolsempty %no navigation pane
\...
- 102
1
vote
0
answers
43
views
Logo height equal to frametitle height in Beamer presentation gives error [closed]
This is with reference to the question Adjust logo height to match \frametitle box height
This excellent solution works exactly in a way I want. However when I use the environment
\begin{block}
\end{...
- 1,463
1
vote
0
answers
54
views
Beamer Heading Break New Line [closed]
I have the following code with many sections:
\documentclass{beamer}
\usepackage{apresentacao}
\usepackage{graphicx}
\usepackage{ragged2e}
\setbeamercovered{highly dynamic}
\newcounter{saveenumi}
\...
- 721
0
votes
1
answer
686
views
Insert picture in frame title in beamer
I would like to supplement frame title in beamer with a picture like this:
The picture is anchored in a fixed position (e.g. the right corner of the frame title).
I would still like to have some ...
- 7,333
0
votes
0
answers
48
views
Can someone tell me why is the title look like this?
\makeatother%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\renewcommand{\thesection}{\Roman{section}}
\renewcommand{\thesubsection}{\thesection.\Alph{subsection}}
\usepackage[brazil]{...
1
vote
1
answer
98
views
Adding shadow to long Frame title text
Want to add shadows in the frame title, which can be multiline. Tried a few solutions, none of them worked for me. Any help?
Adding codes from here, MWE:
\documentclass{beamer}
\usepackage{pgfplots, ...
- 747
0
votes
1
answer
143
views
Beamer: pause by default after frametitle
As the title says. I use \beamerdefaultoverlayspecification{<+->} in my presentation. By default, beamer displays a new frame with the first item or piece of text already visible. However, I ...
- 383
8
votes
1
answer
318
views
How to make this title in a title page?
I would like to reproduce the following title in my title page given by the code below (this picture was done using Pages, from Apple):
Here's my title page code to work with:
\documentclass[...
- 2,064
0
votes
1
answer
72
views
What's wrong with this Title Page?
I'm having troubles in setting up a simple title-page.
Some horizontal lines aren't drawn at the proper place, one on top of the next (see the preview below).
I would like to add a white border all ...
- 2,064
1
vote
1
answer
219
views
How do I change the frame continuation counter from roman numerals (i, ii, iii, ...) to arabics ( 1,2,3, ...)?
I'm trying to find my way through a metropolis-themed template, and I'm kind of lost. I'd love to replace those lowercase roman numerals that appear in multipaged frames with standard arabic numbers.
...
- 13
2
votes
1
answer
1k
views
Remove title separator in Beamer Metropolis theme
I would like to disable the zero-height box separator between the subtitle and the author, inside the title slide.
On the Metropolis documentation I found only the way to change the color of the title ...
- 103
1
vote
1
answer
92
views
How can I automatically have a frametitle on my agenda page in beamer?
Rephrased
I am still struggling with beamer. What I want to achieve is, that the agenda page automatically has the table of contents and writes Agenda at the exact same location as the section would ...
- 4,950
1
vote
1
answer
203
views
Start page from same point when Beamer frame has no title
I am making a presentation using beamer environment in latex. However, one of my slides does not have the frame title (The slide next to slide no. 17 in this pic). So, what is happening is that the ...
- 821