Questions tagged [header-footer]

{header-footer} is about customizing headers and footers, i.e., choosing a page style for certain pages (e.g. empty, plain, headings) and (for the styles employed) placing information like the current section title and page number. Popular packages are {fancyhdr}, {scrlayer-scrpage}, {titleps}, and {scrpage2}.

Filter by
Sorted by
Tagged with
3
votes
1answer
2k views

How to use pagenumbering in the document?

In my Master thesis, I would like to have the title page without any page number and an acknowledgments section and the table of contents with roman numbers. The rest of the document should be ...
127
votes
3answers
195k views

Creating unnumbered chapters/sections (plus adding them to the ToC and/or header)

I'm using the report document class for a thesis, and I need to add things like "Acknowledgements" and an "Introduction". I noticed that there is an \abstract command which would have been wonderful ...
122
votes
4answers
88k views

How can I display a short chapter name in the header and a long chapter name in the ToC?

I am writing a book and one of my chapters has a very long title. As it can't be displayed correctly on the top of even pages, I provide a "short title name" via the \chapter[short title]{long title}...
213
votes
12answers
132k views

How can I add “page # of ##” on my document?

I want to add a footer to my document displaying the current number out of total number of pages. How do I do that?
24
votes
5answers
24k views

How to translate and rotate the heading of landscaped pages?

Objective How to change the heading of landscaped pages from to ? Minimal Code \documentclass{book} \usepackage[a5paper,hmargin=3cm,vmargin=5cm]{geometry} \usepackage{lscape,lipsum} \begin{...
6
votes
1answer
4k views

Non numbered chapter* header issue

I have a problem with the headers on the second page of my non-numbered chapter. Below is my minimal working example. Everything works but in my Introduction chapter (if I put it without a number as ...
62
votes
6answers
33k views

How to remove headers and footers for pages between chapters?

To ensure that a new chapter starts on a right-hand page, the book class (and the report class with the options twoside and openright) will insert blank pages between chapters if necessary. However, ...
76
votes
5answers
102k views

Custom first page with fancyhdr

I'm using the package fancyhdr to format my footers and headers, with my name in the header and a n of m pages format for the footer. Like so: \pagestyle{fancy} \fancyhf{} % clear all header and ...
29
votes
2answers
5k views

Chapter Title in rotated vertical box at the margin

I am using the book document class. I would like to have Chapter name (Interduction, Results, Discussion, ...conclusion...) to appear in every page, in the right side small vertical (color filled) box ...
32
votes
2answers
44k views

Fancyhdr does not apply same header/footer on chapter and non-chapter pages

I have a problem with the fancy package: I use the report documentclass and I have a chapter, a lot of text and then a new page starting with a section (or the next page has no chapter starting on ...
139
votes
1answer
114k views

How to remove the top horizontal bar in fancyhdr?

When using fancyhdr, how do you remove the top horizontal rule? I do not want a header at all, just a footer. This is what I do now: \documentclass{article} \usepackage{fancyhdr} \pagestyle{fancy} ...
47
votes
5answers
54k views

Why doesn't \pagestyle{empty} work on the first page of a chapter?

Here's a minimal case of the problem: \documentclass{book} \pagestyle{empty} \begin{document} \chapter{The first} This page has a page number\ldots \newpage \ldots but not this one. \end{...
21
votes
2answers
6k views

How to customize headers and footers?

I'd like to modify the contents of my headers and footers - e.g., to display the current chapter and/or section title or to change the pagination alignment. How can I do that? I've noticed the ...
9
votes
1answer
3k views

Beamer template with different style options for frames

I am working on a beamer template which tries to mimick an existing .ppt-template from my institute. My problem now is, that the beamer template should be able to have frames with different styles for ...
35
votes
3answers
32k views

Chapter title in header too long

How can I format the header on every page displaying the title of the current chapter? In one of my chapters the title is too long so it is running out of the page. Here's a minimal example of my ...
33
votes
2answers
10k views

\pause in tikzpicture breaks footline

I've discovered that you can \pause within a tikzpicture, which works well until I switched the theme to one with a footline. I've created a "test case" that illustrates the problem. \documentclass{...
35
votes
4answers
13k views

Suppress page number for a single page that only contains one large table?

I have a large table that uses up the whole space on a page. Unfortunately, the table also covers the page number, which is shining through. I don't want to split the table across two pages, hence I ...
29
votes
6answers
17k views

How to get part name in LaTeX ?

Actually I am using the fancyhdr package, and trying to put the current part name in the right header. I know that \rightmark and \leftmark are used to represent the current section and chapter ...
16
votes
3answers
3k views

How to set colored ruled margins for different pages?

I want to write a LaTeX document, and I want to have document rules (colored margins distinguishing sections and/or even/odd pages). Here is a model of what I have in mind: How can this be ...
79
votes
6answers
140k views

How to insert page number in Beamer navigation symbols?

I created a presentation with Beamer, and I used Darmstadt theme. But, this theme doesn't have the page number. I know that I can insert the page number in Footline with: \setbeamertemplate{...
36
votes
1answer
17k views

\pagestyle{empty} doesn't seem to work for page with \maketitle

In the LaTeX document pasted below, I still see page numbers upon compiling, even though I've included a \pagestyle{empty} command below the \maketitle command. Any ideas what I'm doing wrong? Thanks ...
47
votes
1answer
36k views

How to remove conference information from the ACM 2017 SIGCONF template?

I have downloaded the new ACM template for conference proceedings (sigconf format). Even when I comment out the lines that are related to conference information, price, DOI, etc. I get the following ...
18
votes
2answers
7k views

Creating letters with zero-margin colored headers, in addition to the regular letterhead

I'm trying to use LaTeX for creating corporate letters. What I have found is that there are many tools to write letters, but they are mostly focused on letters of more personal nature rather than ...
0
votes
2answers
2k views

Text on background-image footer and header

I'm trying to create a template for my article, which has an image on the header, and on on the footer. I also want to put text on these images. The result would look like this : (Blue and green ...
8
votes
1answer
2k views

How to set the pagestyle on the page a particular float ends up on?

Sometimes, a float is just a tiny bit too large for one page and one would like to remove the page number and hope that nobody notices. \documentclass{article} \usepackage{mwe} \begin{document} \...
33
votes
2answers
52k views

Suppress Fancy header and footer on first page only.

How to suppress the fancy header and footer on the first page? On other pages, they should be visible.
31
votes
1answer
61k views

Increase height of fancyhdr header

How would one increase the height of the \fancyhead{} so that the text in the main body, doesn't collide with the title? I have the following MWE: \documentclass[a4paper,10pt,oneside]{article} \...
3
votes
2answers
3k views

fancyhdr - anomalous behaviour on first page

I am having trouble typesetting multi-line headers using fancyhdr The header on the first page behaves differently than the header on subsequent pages. The first page header has no depth, but produces ...
13
votes
1answer
12k views

geometry, fancyhdr: \fancyfoot[C]{\thepage} is not really centered

After switching from the report class to the book class and starting to use the fancyhdr package to control headers/footers, the page numbers in my footers are no longer centered. This is my fancyhdr ...
12
votes
1answer
469 views

Bad alignment of Author and Title in Beamer class (Warsaw theme)

I just uninstalled TeX Live 2016 and installed TeX Live 2017 and I noticed that the vertical alignment of author and title in any beamer presentation with Warsaw theme has been disrupted. In this ...
119
votes
3answers
310k views

Creating Running Headers and Footers, but not on the First Page

I want a header similar to Microsoft word that appears at the top of each page. However I do not want this on the first page. I would like to have the name of the project on the left, my name in the ...
53
votes
4answers
201k views

Insert a blank page after current page

I want to insert a blank page in a document so that the text would be added to the content of the current page till it reaches end of the page, the next page would be empty, and the text continue from ...
43
votes
4answers
81k views

Add a new empty page

I have a .tex file which is like my main, \documentclass[spanish]{article} \usepackage{times} \usepackage{amsmath} \usepackage{graphicx} \usepackage[...
15
votes
1answer
6k views

Headers and page numbers in external borders

I am trying to recreate in *TeX the same aspect that you can see in the following picture showing a document that I created a while ago with MS Publisher. As you can see, page numbers are rendered ...
37
votes
2answers
46k views

How to remove footline on the title page of beamer slides

I am using the default theme, and use the following to customize the footline, \useoutertheme{infolines} \setbeamertemplate{footline}{\hspace*{.5cm}\scriptsize{\insertshorttitle \hspace*{50pt} \hfill\...
13
votes
4answers
8k views

Place a TikZ picture on every page

I am looking to place a picture (TikZ picture) on every page of my document. How can I do that? In essence I would like to control the placing of the image on even and odd pages. For example the ...
5
votes
2answers
982 views

Chapters and verses of current page in header

This question is linked to my other titlesec question Does any one know how to add the current segment location at the top of any particular page. What I need is the reference at the top of a ...
22
votes
1answer
4k views

Headers of \chapters* take the headers of their previous \chapter

When using book.cls and using \chapter* after a \chapter, the header used in \chapter* is wrong. An example is pasted below. Is there any known workaround for that? I have tried quite some tricks ...
11
votes
3answers
3k views

How to remove header on the page with big picture (or a page containing floats)?

Can you help me to remove header from the page where is only one big picture? I tried \thispagestyle{empty} but it removes a header on the next or previous page. I don't know how to remove it exactly ...
11
votes
1answer
1k views

Bibliography and headers with titleps and biblatex

I am using titleps to get custom headers, and biblatex for the bibliography. The headers look all right except when it comes to the bibliography, where a "REFERENCES" label appears in the header and ...
40
votes
2answers
25k views

Header and page numbers with pdfpages

I have a chapter of attachments which contains pdf files in this format, using the awesome pdfpages package: \chapter{Title} Lots of multipage pdfs following \includepdf[pages=-,frame,scale=0.9]{abc....
24
votes
2answers
1k views

Breadcrumb hyperlink header

I wish to put breadcrumb navigation with hyperlinks into the header of each page. Clicking on each part, chapter, section will take you to the beginning of that part/chapter/section. I'm already ...
27
votes
5answers
4k views

How I can automatically add a page if the total number of pages is odd?

I need automatically add a blank page (also without document header, numbering and footer) at the end of the document, if the total numbers of pages is odd. How I can do that? And preferably without ...
5
votes
1answer
3k views

Glossaries and custom section headings broken

I've a document, where I use the glossaries to manage acronyms for me. Sometimes, I use a \gls{} command inside a section heading, and I have defined page headers to have the current section heading. ...
19
votes
3answers
30k views

Problem with the header/ footer width

I have recently started using the geometry package to format the margins of my documents. Although, I've noticed that the width of the header/ footer remains the same. How can I correct this? Here'...
1
vote
1answer
828 views

What is causing different spacing between a header and content on one page only?

I have found that for only one page (so far) the spacing between the header and content is different from the spacing on all the other pages. You can see this behavior in the images below (from pages ...
29
votes
2answers
75k views

Chapter name in the header with \chapter*

I need to display the chapter name with the \chapter* command to the left side of the header. This is one example of what I tried: \documentclass[12pt,a4paper,oneside]{book} \usepackage{...
18
votes
3answers
19k views

Using fancyhdr to create an image based header and footer

I'm trying to generate a latex report (via Sweave and R) where the header of the document is an image that covers everything (including the top/left/right page margin) and the footer covers everything ...
18
votes
1answer
8k views

How to use short subsection title in header but not in table of contents?

I have a (onesided) document with fancyhdr and pagestyle fancy so it displays the section-title on the right header and the subsection-title on the left header. If section and subsection titles are ...
27
votes
1answer
1k views

Non rectangular page geometry

I am interested in using non-rectangular page geometries for my flipbook idea (in fancyhdr with image and flowing text). The page geometry that I'm after is that the text has a little rectangle ...

1 2 3 4 5 13