Questions tagged [ieeetran]

{ieeetran} is a document class for IEEE Transactions journals and conferences.

Filter by
Sorted by
Tagged with
0
votes
0answers
25 views

\savetrees and authors block in IEEE trans

So I have this savetrees package and I want to add two authors with two large affiliations. I use the author block environment but everything is shifted to the right sided of the page and things do ...
0
votes
0answers
13 views

\bibentry with \bibliographystyle{IEEEtran}

I'm trying to use \bibentry{} with \bibliographystyle{IEEEtran} but without success until now. A MWE follows. \documentclass[a4paper,11pt,twoside,openright]{book} \usepackage[T1]{fontenc} \usepackage[...
1
vote
2answers
184 views

IEEEtran: Getting fonts “right” with lualatex

I know that IEEEtran is basically pdflatex only. However, I would prefer using lualatex but it gives me a couple of font warnings for this snippet: \documentclass[conference]{IEEEtran} %\usepackage[...
0
votes
1answer
23 views

Referencing individual figures in minipage

I have a two column article and multiple figures. I tried to use {figure*} command but it occupies the whole horizontal line even with two small images (), and no more images, that is another {figure*}...
0
votes
0answers
19 views

Should “font tuning” of IEEEtran be disabled when using the microtype package with the IEEEtran class?

According to the documentation of the IEEEtran class, IEEEtran normally alters the default interword spacing to be like that used in IEEE publications. The result is text that requires less ...
0
votes
0answers
20 views

Regarding incompatibility of the caption package with IEEEtran class

When trying to load the caption package with the IEEEtran class, I get the following warning Unsupported document class (or package) detected, usage of the caption package is not recommended. See ...
1
vote
1answer
51 views

How to use unicode-math in an IEEEtran document

IEEEtran is to be used with pdflatex (and for journal papers, one does not have a choice for a document which should be published). But in two use cases, compilation with lualatex can be desired. ...
6
votes
1answer
1k views

IEEEtran seven authors

I saw this question which showed how to add 6 authors to an Ieee paper. How can I do this to add seven authors in this format? I'd like 4 on the first line and three on the second line. Here's what ...
10
votes
2answers
18k views

Displaying in-text citations in a compressed way (e.g. [1-3]) instead of the default one [1]-[3] using cite package inside IEEEtran/journal mode

I have been trying to display the in-text citations in the following format: [1-3], or [1, 6-8] which looks like it is the default one inside the cite package, but what I get is: [1]-[3] ...
0
votes
0answers
19 views

changing the format change the reference number, how do I force to keep the same reference number?

I'm changing the format from IEEE 2 column to acm computing survey. But changing the format also change the order of references. How can I keep the past order of references and maintain the same order ...
0
votes
0answers
22 views

Multiple bibliographies in IEEEtran

I have some specific requirements on the bibtex and IEEEtran. I just want to implement the following format: Section 1 Texts References of Section 1 Section 2 Texts References of Section 2 My ...
0
votes
1answer
110 views

IEEEtran class: how to achieve “small caps” font effect? [duplicate]

In the IEEEtran class, how can I achieve the "small caps" font effect used for e.g. stating the names of IEEE societies and publications, and the section titles (see example below)? Thanks and ...
0
votes
1answer
35 views

Disabling “[Online]. Available:” from References in IEEETran.cls in Overleaf

How do I remove "[Online]. Available:" from References in IEEETran.cls in Overleaf? I am currently using \def\url#1{} to disable the URL. Thank you for your help.
0
votes
2answers
33 views

How to change the IEEETran.bst file to ignore the months in the date?

I am wirting my thesis with Lyx, and BibTex for creating my Bibliography. My .bib is generated by Mendeley. So, what I try to manage is to find a way to change my IEEEtran.bst style file to ignore the ...
0
votes
1answer
168 views

Underfull \hbox (badness 10000) in paragraph in bbl bibliography

Just after the word resonance it is getting the above error. underfull. I have tried using \smallskip \bigskip but it does not work. In texstudio the author name until the word resonance in one line. ...
1
vote
1answer
5k views

How can i insert large figure in IEEE template

Please, i have to insert a figure (width 1177, height 437) in IEEE template two columns. Here is my code: \begin{figure}[H] \centering \includegraphics[scale=0.4]{./Panel} \caption{MY Panel} \label{...
0
votes
1answer
31 views

Algorithm in IEEE journal

Here is the template I use for the following journal. The algorithm is perfect in regular latex document as can be seen in: . I have problems with all the algorithm when inserting it to the template. ...
0
votes
0answers
6 views

Edit IEEEtran bibliography to add date after author names in the order

I am using shareLatex and overleaf v2. I do not care to learn how to type out the entire bst file or the syntax so much. what i do want to do is make it so that bibliographies appear in the [name][...
30
votes
3answers
178k views

LaTeX Warning: Citation undefined

Sample running code: \documentclass[a4paper,11pt]{article} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage{lmodern} \usepackage[hidelinks]{hyperref} % Hyperref package for url's and [...
2
votes
1answer
23 views

Change order of fields for @inproceedings type of references while using ieeetr bibliography style

I am using the ieeetr bibliography style and have a specific problem concerning @inproceedings type of references. My tex file is as follows: \documentclass{article} \begin{document} \cite{...
1
vote
0answers
55 views

How to tackle the following? Please don't say `\def cs{…}', say `\def\cs{…}'. I've inserted an inaccessible control sequence

I am writing a text using EngC template (Cambridge Univ. Press). Main text looks ok, but I am getting a number of errors related to references part. Any suggestions on how to tackle it? \...
0
votes
0answers
31 views

multiple authors with some common affiliations

I am tryingto get something like the following using \documentclass[conference,a4paper]{IEEEtran} but finding it difficult to add distinct emails to each author. This is what I have now \author{\...
0
votes
1answer
91 views

Caption fontsize in a listing using minted

With listing and minted and a pycon lexer to emulate an IPython console, I'd like to change the caption font size to be \footnotesize. Unfortunately, my code below does not change the fontsize of the ...
0
votes
0answers
21 views

change typewriter font temporarliy

I'm writing a paper using IEEEtran which sets ttfamily to something like Courier. I don't want to change the global setting but just want to make a few words look like the traditional typewriter font....
5
votes
1answer
31 views

How can I use the package bytefield with the LaTeX class IEEEtran?

Given the MWE %\documentclass{article} \documentclass{IEEEtran} \usepackage{bytefield} \begin{document} \begin{bytefield}[bitwidth=10pt,bitheight=20pt]{8} \bitheader{0-7} \\ \bitbox{1}{A}...
0
votes
1answer
35 views

Footnote not coming on the page

Please find the code as below: \documentclass[journal]{IEEEtran} \makeatother \usepackage{abstract} \usepackage{amsthm} \theoremstyle{definition} \newtheorem{...
2
votes
2answers
61 views

How can the section alignment in IEEEtran be adjusted for left alignment?

I want to put our section in center to left How could I possible achieve this in this kind of TeX document? \documentclass[conference,a4paper,10pt]{IEEEtran} I have put this fragment into my TeX ...
0
votes
1answer
91 views

How to to insert a footer (copyright and page number) IEEE Conference

I am using two packages to deal with the footer: standard letter document class (def) and (fancyhdr). I want that the copyright has to be only on the first page on the right side, and the page number ...
0
votes
1answer
235 views

How to stretch long table to new page in two column IEEE format?

I have 60 rows and 12 columns with plenty of text data inside the table.I am using IEEEtran format.I want to place my table in whole page with continue to next page. Tried many libraries but didn't ...
1
vote
2answers
194 views

Using a4paper option in IEEEtran.cls

My problem is actually about setting the paper margins for A4 paper format. The link https://www.ieee.org/content/dam/ieee-org/ieee/web/org/conferences/conference-template-a4.docx redirects to a ...
2
votes
1answer
112 views

ORCID in LaTex file of IEEE Trans. in a customized position

I would like to use the ORCID in LaTex file of IEEE Trans. I reached to this answer. I would like to place the ORCID icon in another position in front of the name as: How can I do that in a standard ...
0
votes
1answer
31 views

Figure and Table next to each other in IEEEtrans with specific caption style

I'm looking for a solution where I can put a figure and a table next to one another in the IEEEtrans document class (2 columns). Each should have its own caption, so subfloat can't be used and, the ...
0
votes
0answers
30 views

Bottom margin is smaller with no reason in IEEEtran.cls

I"m writing a IEEE Transactions paper using the IEEEtran.cls provided by the IEEE website. With no reason the bottom margin is smaller than the one set by IEEE (and one of my reviewers noticed that). ...
1
vote
2answers
78 views

Text not bold in IEEEtran paper (LuaLaTeX / Debian Linux)

I'm writing a paper that uses an IEEEtran layout, but for some reason it doesn't seem to be loading the fonts correctly. The abstract should be bold, but it currently isn't, for example. I'm ...
0
votes
0answers
18 views

IEEEkeywords problem

I am trying to add keywords to my latex file. I used \begin{IEEEkeywords} ........ \end{IEEEkeywords} I added \usepackage{ieeetran} and then I received this error: ! LaTeX Error: File ieeetran....
0
votes
1answer
31 views

Subfigure breaks caption size

On the IEEE paper layout i use subfigure/subfloats two place two figures side-side. While the a) b) tags are ok the main caption (also for other figures) increase to textsize (shown on the left col). ...
8
votes
1answer
28k views

Refering to website with bibtex

I am using the latex package from IEEE. I want to know what is the format for referencing a web site? Which fields are required in the reference which contain URL?
1
vote
1answer
1k views

IEEEtran references split into two pages [closed]

I'm writing a journal using IEEEtran template. Bibliography is included in a .bib file. An issue happen (but no error reported by Latex) when generating references: references are split into two pages ...
4
votes
3answers
581 views

LaTeX gives error undefined control sequence table

\documentclass[journal]{IEEEtran} \hyphenation{Smart Grid} \usepackage[classicReIm]{kpfonts} \usepackage{siunitx,booktabs} \usepackage{subfloat} \usepackage{subcaption} \usepackage{graphicx} \...
2
votes
1answer
887 views

Change line in caption [IEEE Access journal template]

I want to place a multiline caption for a figure using the IEEE Access template. The template is like this: \Figure[t!](topskip=0pt, botskip=0pt, midskip=0pt){fig1.png}{<caption>\label{fig1}} ...
2
votes
2answers
28 views

Centering the text in a cell in vertical distance

Consider the following table definition. \documentclass[conference]{IEEEtran} \IEEEoverridecommandlockouts \title{my title} \maketitle \section{Section 1} Table~\ref{my-label} shows \begin{table} ...
0
votes
0answers
135 views

biography error in IEEE access template

I am using IEEE access template downloaded from here. I am adding authors biography in my paper using the following syntax- \begin{IEEEbiographynophoto}{author_name} (S'18) bla bla bla \end{...
1
vote
2answers
44 views

How can I use page-wide threepart table in a 2 column document?

I have an IEEEtran paper I am writing and I want to insert a table with footnotes that spans over the whole page width. Normally to insert a table over the two columns I use the table* environment ...
0
votes
1answer
45 views

texlive can not install PDF doc of clrscode3e

Update on May 11, 2019: From the third item of the Basic Requirements section of TUG webpage TeX Live package contributions, TeX Live must refrain from installing generated documentation when ...
0
votes
0answers
85 views

Adding the table of content in IEEE access template after the abstract

How to place after the the abstract in IEEE access format I had used \onecolumn then \tableofcontent. I am trying to add the table of content in the same page of the abstract but with a single column.
1
vote
0answers
37 views

How to cite author's name in a research paper? [duplicate]

I try to add the author's name of a paper to describe their contributions. But it does not work: \usepackage[numbers]{natbib} \citeauthor{24} This is the output of my pdf looks like this: "(author?)...
16
votes
4answers
24k views

Error: LaTeX Error: Something's wrong--perhaps a missing \item

I found a lot of posts about the same problem but none could help. Can you please help me figure out why I am getting this error? I am using: IEEEtran.bst and IEEEtran.cls. Both of those files and the ...
3
votes
1answer
116 views

IEEEtran, standalone, and XeLaTex: do not crop

I am using the following MWE. \documentclass[tikz,class=IEEEtran]{standalone} \usepackage{tikz} \begin{document} \begin{tikzpicture} \node[draw, line width=5pt,blue, fill=green](boxofgreen) {This box ...
1
vote
1answer
25 views

Removing tilde (~) from IEEE references when using bstctlcite

I discovered the bstctlcite option which IEEE includes as part of the IEEEtran class. Specifically, I am using the ctlmax_names_forced_etal option to shorten a long list of author names. My document ...
1
vote
0answers
55 views

Pasting URL in @misc entry for bib

I have written the following entry for a URL in ieeetr bib style: @misc{Microsoft18, title={Introducing the Office (2007) Open XML File Formats}, url={https://docs.microsoft.com/en-us/previous-...