Questions tagged [ieeetran]
{IEEEtran} is a document class for IEEE Transactions journals and conferences.
191
questions
1
vote
2
answers
3k
views
How to put Figure at middle or at desired position on a page
How can I put a figure that spans both of the two columns text at middle or desired position of a page (not at top or bottom).
\documentclass{IEEEtran}
\begin{document}
\begin{figure*}[h]
\...
- 747
43
votes
3
answers
26k
views
IEEEtran - How to include ORCID in TeX/PDF with PdfLatex
This question led to a new package:
orcidlink
I would like to display the ORCID id in an author list in an IEEEtran pdf, like that:
Is there a standard way to include it in an IEEEtran article with ...
- 533
11
votes
2
answers
23k
views
Displaying in-text citations in a compressed way (e.g. [1-3]) instead of the default one [1]-[3] using cite package inside IEEEtran/journal mode
I have been trying to display the in-text citations in the following format:
[1-3], or [1, 6-8]
which looks like it is the default one inside the cite package, but what I get is:
[1]-[3]
...
- 259
9
votes
2
answers
8k
views
Add Overbrace to describe a column of matrix
I want to add some over-braces to a matrix to get the following output:
However, this this what I managed to get:
I don't know how to get the neuron 1 and neuron 2 headings...I was thinking of ...
- 193
38
votes
1
answer
40k
views
How to use biblatex with IEEE bibtex style?
http://mirrors.ctan.org/macros/latex/contrib/IEEEtran/bibtex/IEEEfull.bib
defines a bibliography style. How to use that if I want to use biblatex to format my bibliography?
- 822
2
votes
1
answer
4k
views
BibTeX, IEEEtran and multiple citations
I have encountered a problem when doing multiple citations using BibTeX and the document class IEEEtran in Mac OS X (Version 10.6.8). The desired effect is similar to this:
References [1, 2, 3].
...
- 199
62
votes
14
answers
78k
views
Disabling URLs in bibliography
I use Mendeley for article management and export the related items to a bib file for referencing in LaTeX documents. I use IEEEtran style and see that the bibliography items include URLs which I don't ...
- 1,809
34
votes
2
answers
125k
views
Placing a figure in the bottom of a page spanning the two columns of an IEEE document
I am writing an IEEEtran article. I use graphicx for inserting .pdf images. Normally, LaTeX selects a position like A. I want LaTeX automatically find and insert the image to a position like B. How ...
- 907
32
votes
3
answers
45k
views
How to determine the font being used by a latex document [duplicate]
The scenario is as follows. I am working on a paper using the IEEEtran latex class. I am generating some figures using the Matplotlib plotting library in Python. Matplotlib lets the user adjust the ...
- 931
25
votes
1
answer
24k
views
IEEEtran document class — how to align five authors properly
How do I align author names such that the first three authors appear in 3 column format and the last two in two column?
\author{\IEEEauthorblockN{1\textsuperscript{st} Given Name Surname}
\...
- 353
18
votes
1
answer
15k
views
How to use the algorithm2e package with IEEEtran class?
The IEEEtran documentation suggests that I should not use the floating algorithm environment of algorithm2e.sty.
B. Algorithms
IEEE publications use the figure environment to contain
...
- 1,759
12
votes
3
answers
27k
views
Using IEEEtrantools
I am trying to use the IEEEtrantools package using the following command:
\usepackage[retainorgcmds]{IEEEtrantools}
but get the following error message:
File `IEEEtrantools.sty' not found. \...
- 1,565
24
votes
2
answers
52k
views
IEEEtran: Placing a two-column figure on desired page
Using the IEEEtran class, I have problems positioning a two-column figure on the desired page: The figure is always plotted on the next page.
Here my minimal code:
\documentclass[conference]{...
- 6,110
24
votes
1
answer
65k
views
Creating a table in two column style page
I want to create a table, in a two column style page (IEEEtran) which will range in both columns. Any idea about this issue?
- 361
11
votes
3
answers
8k
views
How to avoid overflow using \IEEEpubid on the first column?
I am trying to write a journal paper using the IEEEtran.cls template.
My problem is that the Publication ID Mark overflows into my thanks section.
This is the bottom of the title page:
From the ...
- 1,759
10
votes
2
answers
40k
views
How to insert subfigure with caption in IEEE trans?
I am trying to insert some subfigures with caption to all the figure in IEEE trans and i don't want to span two columns. But it is not working. I want to do the following:
.
And what i tried:
\begin{...
- 491
7
votes
2
answers
5k
views
Is it possible to have authoryear-style citations with the IEEEtran document class?
For school I have to write a paper and use the IEEEtran bibliography style:
\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
\bibliography{...
- 353
1
vote
2
answers
3k
views
How can I remove the comma between volume and number in the IEEEtr.bst file
I just started modifying my ieeetr.bst file.
I was able to switch first and last name for my (journal article) authors in the bibliography. I also wanted to display the Volume and Issue number as 1(...
- 13
62
votes
2
answers
249k
views
Multiple references in LaTeX
I'm writing a paper and using the IEEEtran.cls in LaTeX. I need to have my references to appear like:
\cite{test1,test2,test3}
I want :
[1-3]
I searched and found that I need to include cite package....
- 837
54
votes
3
answers
307k
views
LaTeX Warning: Citation undefined
Sample running code:
\documentclass[a4paper,11pt]{article}
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage{lmodern}
\usepackage[hidelinks]{hyperref} % Hyperref package for url's and [...
- 1,113
54
votes
5
answers
40k
views
How to remove bookmarks from you pdf latex file?
how does one remove bookmarks from a LaTeX generated pdf file?
I wrote the article in LaTeX. When submiting the .pdf to IEEE eXpress for checking, I get the error:
file contains bookmarks.
Any ...
- 937
37
votes
1
answer
68k
views
IEEE affiliation blocks
I'm using the IEEE format to write a paper. I have 4 authors from two institutions so I need blocks of affiliations. This is how I want it to look like:
Author 1*, Author 2#, Author 3#, Author 4*
...
- 1,023
17
votes
2
answers
35k
views
equation spanning two columns in ieeetran
I am writing a paper using ieee style in two columns format. Do you know how can I write an equation that spans over the two columns?
- 345
13
votes
1
answer
15k
views
IEEE-Template: Algorithm over both columns
I'm currently working on a paper using the IEEEtran template. I do have a pseudocode I would like to put into this paper. In a former paper I saw that it is possible to put this algorithm in a box ...
- 133
12
votes
1
answer
2k
views
Enabling dashed option for biblatex-ieee style
According to the biblatex manual, the dashed option is only available in authortitle, authoryear and verbose styles. Is it possible to enable this option for the biblatex-ieee style?
I want to ...
- 1,750
12
votes
1
answer
2k
views
Elegant way to make entire citation bold
Is it possible to make an entire reference appear bold in the references section when using BibTeX? I'm using the IEEE templates and .bst.
I found this related question, but is there a more elegant ...
- 1,261
7
votes
1
answer
4k
views
Proper usage of biblatex-ieee BibLaTeX style in an IEEEtran document
The package biblatex-ieee provides a style for BibLaTeX which follows the guidelines of the IEEE (citations are numeric and unsorted).
Unlike the IEEEtran.bst file, it provides only the bibliographic ...
- 6,823
4
votes
2
answers
4k
views
IEEE Transactions copyright
What is the command to write the copyright "@2015 IEEE. Personal use is permitted, but republication/redistribution requires IEEE permission."
on the bottom center of the first page?
- 51
3
votes
2
answers
2k
views
IEEEtran: Getting fonts "right" with lualatex
I know that IEEEtran is basically pdflatex only.
However, I would prefer using lualatex but it gives me a couple of font warnings for this snippet:
\documentclass[conference]{IEEEtran}
%\usepackage[...
- 2,111
1
vote
1
answer
781
views
Fit table into one column for IEEE
I am trying to fit this table into one column but not possible...
\documentclass[journal,twoside]{IEEEtran}
\usepackage{siunitx}
\usepackage{tabularx}
\usepackage{booktabs}
\usepackage{float}
\begin{...
user200423
67
votes
3
answers
47k
views
Forcing page numbers with IEEEtran
The IEEEtran document class is hiding page numbers from my document! Is it possible to force page numbers to appear in the document?
EDIT: Sorry I should have mentioned that I am using conference ...
- 773
48
votes
5
answers
75k
views
Error: LaTeX Error: Something's wrong--perhaps a missing \item
I found a lot of posts about the same problem but none could help. Can you please help me figure out why I am getting this error? I am using: IEEEtran.bst and IEEEtran.cls. Both of those files and the ...
- 2,073
37
votes
2
answers
105k
views
Using references to a .bib file when using IEEEtran
I'm writing an article that is supposed to be written using the IEEE Manuscript Templates for Conference Proceedings. I downloaded the latex templates from here, and used the bare_conf.tex as a ...
- 473
19
votes
1
answer
37k
views
using IEEEtran document class -- how to align multiple rows of author
Say I am using IEEE Transactions journal class
\documentclass[conference]{IEEEtran}
How I should align the author properly so that it appears in this format?
- 4,681
15
votes
1
answer
33k
views
Algorithm and IEEEtran
I'm trying to write an algorithm in a IEEEtran LaTeX template and it doesn't work in any way.
\usepackage{algorithm}
\usepackage{algorithmc}
%\begin{algorithm}[H]
\begin{algorithm*}
\caption{ASGP ...
- 955
14
votes
4
answers
12k
views
IEEEtran BibTeX Style - how to deactivate URLs?
I am using the following BibTeX style for my bibliography.
\bibliographystyle{IEEEtran}
\bibliography{IEEEabrv,references,thesis}
This formats bibliography entries like this:
, including a ...
- 1,152
14
votes
2
answers
14k
views
DOI in IEEEtran bibliography
The IEEE Citation Reference specifies that a DOI should be provided for electronic articles without page numbers. However, IEEEtran.bst appears to provide no such functionality. What is the best way ...
- 466
14
votes
2
answers
12k
views
IEEEtrans template requires not to use algorithm package?
During the IEEEtrans.tex, there is a comment below package algorithmic saying that
Do NOT use the algorithm
floating environment provided by algorithm.sty (by the same authors) or
algorithm2e....
- 651
14
votes
1
answer
59k
views
Creating a table fitting one column of a two column style page
I want to create a table, in a two column style page (IEEEtran) but I want the table to fit only one of the columns. The table which I make is exceeding the single column width of the page. Please ...
- 173
13
votes
2
answers
13k
views
How to make a code fragment in ieeetran class
What I wish to achieve is rectangle around code, with code in the font format as shown. How should I achieve this format?
- 4,681
13
votes
1
answer
5k
views
How can I have a smaller indentation in description with IEEEtran?
I'd like to use a description environment together with the IEEEtran document class. One of the labels is actually quite long (three words) so I need to use \IEEEsetlabelwidth to avoid having the ...
- 533
13
votes
3
answers
47k
views
How to insert the author picture in the biography picture box of the IEEE LaTeX Template
How do I put the author picture in the picture frame box of a journal paper? I tried using this code but the picture wasn't placed in the box, it is outside the box. Here is the code:
\begin{...
- 131
12
votes
2
answers
22k
views
natbib, IEEEtran and alphanumeric citation: is there an IEEEtranSAN style available?
The natbib package provides three versions of the standard BibTeX bibliography styles compatible with author-year citations (\citet, \citeauthor, \citeyear):
plainnat
abbrvnat
unsrtnat
The IEEEtran ...
- 1,424
11
votes
2
answers
4k
views
Getting Rid of Comma before 'and' in Authors' Names
The skeleton of my article looks like
\documentclass[10pt, twoside]{article}
\title{An Example}
\author{S. Barman Roy}
\begin{document}
....
\bibliographystyle{unsrt}
\bibliography{library}
\end{...
- 385
10
votes
2
answers
26k
views
! LaTeX Error: File `IEEEtran.cls' not found [duplicate]
I am new to the Latex environment. I am simply compiling the IEEE trans Latex format in Tex-maker but I am getting this problem. I have copied the ieeetran.cls file to the directory
tex>latex>...
- 103
10
votes
4
answers
16k
views
Language problems with biblatex and babel
I am trying to use biblatex with IEEEtran and babel, however I am having an error: Package babel Error: You haven't defined the language ENGLISH yet.. With regular Bibtex everything works as usual. ...
- 8,295
9
votes
1
answer
790
views
How to improve rendering
The rendering above the red line(zoomed in) was a result of:
\documentclass[journal]{IEEEtran}
The rendering below the red line(zoomed in) was a result of:
\documentclass[journal]{AIAA}
Why is there ...
- 6,337
7
votes
1
answer
16k
views
White spaces around IEEEbiography at IEEE Journal Template
There are four co-author biographies at the end of my paper. There are some white spaces among them. I am trying to get rid of them. Is there a way to do it other than -vspace, because I guess it will ...
- 423
7
votes
1
answer
12k
views
URL in new line Bibtex
I'm being asked to put the url field in a new line after the reference information. Is there a way to do this using IEEEtran?
Edit:
Noting the initial suggestions, you can find the idea of the task ...
- 183
6
votes
2
answers
12k
views
Trying to put a box around a collection of subfigures
I'm trying to have a bounding box around the following figure:
\begin{figure}[htp]
\begin{center}
\subfigure[Process with no error]{\label{noerror}\includegraphics[width=1.5in]{noerror-process}}
\...
- 61