Questions tagged [ieeetran]

{ieeetran} is a document class for IEEE Transactions journals and conferences.

Filter by
Sorted by
Tagged with
0
votes
0answers
620 views

IEEE style references with the article class

I have a document with the article class. I want the references to be formatted with the IEEE style. I used IEEEtrantools as follows: \documentclass{article} \usepackage{IEEEtrantools} \...
4
votes
1answer
187 views

Problem with referring to a paragraph

I have paragraphs in my Appendix, which I have labeled them like this: \documentclass[12pt,draftclsnofoot,journal,onecolumn]{IEEEtran} \begin{document} See Appendix~\ref{p.1} See Appendix~\ref{p....
1
vote
0answers
84 views

IEEEtrantools with TeXstudio [duplicate]

I am using the IEEEtrantools package with TeXstudio. I have the problem that when writing an equation with \begin{IEEEeqnarray} <formula> \end{IEEEeqnarray} it marks all math commands red ...
2
votes
0answers
236 views

There is no bold text, italics in IEEEtran (using xepersian)?

I have a problem of non-working \textbf, \bfseries commands (and almost all changing fontstyle commands) in Persian document (in English, everything is okay) in \documentclass[journal,onecolumn,11pt,...
3
votes
2answers
2k views

My table is not conforming to the IEEEtran caption table format

I have the following code which produces the first attached Table. But as you can see in the table, both the table label and the caption all fall on the same line: \documentclass[10pt,journal,compsoc]...
1
vote
2answers
4k views

How to fit this table in one column in IEEE format?

I am trying to let this table to fit in one column in my research paper, I tried to use \setlength{\tabcolsep}{1pt} command but did not work. \begin{table}[ht] \setlength{\tabcolsep}{1pt} \...
1
vote
1answer
865 views

Proper usage of biblatex-ieee BibLaTeX style in an IEEEtran document

The package biblatex-ieee provides a style for BibLaTeX which follows the guidelines of the IEEE (citations are numeric and unsorted). Unlike the IEEEtran.bst file, it provides only the bibliographic ...
0
votes
0answers
237 views

Using “normal” IEEEtran-bibliography in “compsocconf” document

I currently use two different templates: \documentclass[10pt, conference, compsocconf]{IEEEtran} and \documentclass[10pt, conference]{IEEEtran} I really like "compsocconf", but the bibliography ...
0
votes
1answer
244 views

Forming & enforcing placement of equations as well as text box

I want to have the set of equations in the TeX code below and a text box to be placed alike the picture below. Can someone kindly provide me a solution? It is IEEE two-column page style. This is my ...
0
votes
0answers
61 views

How to get tables to appear in the top section instead of a list of tables?

I'm writing a paper in IEEEtran format using RStudio and rticles (ieee_article format). When I insert the first table in the document via a new block LaTeX (MarkDown tables do not get converted to ...
1
vote
1answer
360 views

authors informations in a conference paper

I am working on an IEEE paper and the conference has mentioned to have the authors name in two columns (first and second author in the left and the third one in the in the right column). Here is the ...
4
votes
1answer
1k views

Do not show the “(visited on <date>)” on the references

I'm using biblatex and I liked to not show some fields in the bibliography. I've managed to do it for the "issn", "url" and "doi" fields, but it does not work for the "urldate" field, and the "(...
1
vote
1answer
228 views

What I need to do when I want to change from IEEEtran as bibliography style to acm style?

I am pretty new to Latex world. I am a beginner, so bear with me, please! I chose arbitrarily IEEEtran as my bibliography style since it looked by then perfect, and now I have just noticed that one ...
1
vote
1answer
577 views

No “and” between author names in bibliography

I use \bibliographystyle{IEEEtran} for a paper and bibtex with entries like the following: @InProceedings{ author = {Author1, A. and Author2, B. and Author3, C.} title = {blabla} .. } In the ...
1
vote
2answers
437 views

Working with a \documentclass[journal]{IEEEtran} and need to insert table

I need some help here please. I'm working in a \documentclass[journal]{IEEEtran} document. So i have two columns. I need to insert a table, this table contains 3 columns and like 11 rows but the ...
1
vote
1answer
928 views

IEEEtrans does not show the keywords

I downloaded this IEEEtrans template: https://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/?lang=en I want to add keywords to my document. I followed the package's documentation and ...
0
votes
0answers
147 views

A problem happens when using XeTeX compiling with IEEE Trans class

I encountered a problem when XeTeX is applied to compile a document in IEEE Trans class. With the IEEE trans class, the default Time New Roman font is automatically replaced by Computer Modern font ...
2
votes
1answer
758 views

conference header is applied to all pages

My current code (which is basically @Werner's touch) adds the title to every page, whereas it must only be added to the first page. Could you please give me some advice to fix this problem? I can ...
1
vote
1answer
643 views

Left alignment of a conference header in ieeetran

This question is a continuation of this one. How can I align the header from left, like the figure below? (Removing \centering did not work). Thanks to @Christian Hupfer, here is my MWE: %% ...
2
votes
1answer
3k views

Adding conference header to ieeetran[conference]

I'm just gonna add a header to my ieeetran document based on Ruben's solution. But no header is added after compilation. Here is the MWE: %% bare_conf.tex %% V1.4b %% 2015/08/26 \documentclass[...
1
vote
2answers
970 views

How to write the general optimization problem?

I want to write the optimization problem. My code is: \begin{alignat}{3} & \underset{\framebox(100,10){}}{\text{minimize}} & \quad & \framebox(100,10){}\\ & \text{subject ...
2
votes
1answer
404 views

File ended while scanning use of \@@@floatbox

I need to align a figure and a table in my two-column IEEE document. I've just started to handle the case in an MWE, as the following: \documentclass[conference]{IEEEtran} \usepackage{bm} \usepackage{...
5
votes
1answer
5k views

Reduce the gap between Bio's in IEEEtran

I am using this template for my paper: https://www.overleaf.com/9944548wmfnwdynzwhg#/36502743/ I have a question regarding biography entries at the very end. As you can see in the template, there are ...
0
votes
1answer
43 views

Why is the column not starting at the top of the page with ieeetran

This is an intermittent problem I am having. Sometimes it aligns sometimes it does not. I have not been able to replicate it with dummy text. Does anyone have any idea why this would happen? ...
0
votes
2answers
1k views

IEEEtran: How to get rid of ordering in bibtex

This question's answer is addressed how to get rid of the ordering via sorting=none option of biblatex package. How can I acquire the same result with bibtex without calling biblatex? I'd just tried ...
1
vote
1answer
536 views

IEEEtran for natbib gives: 'Author (Year)'

Using this thesis template: http://folk.ntnu.no/skoge/group/latex-for-phd-thesis/?C=N;O=D (found on ShareLaTeX). Changed \usepackage{natbib} to \usepackage[numbers]{natbib}, and added F10-INTRO.tex ...
0
votes
1answer
70 views

Problem merging cells - IEEEtran class

I have a problem when I want to merge two cells in a table, with the IEEEtran class. Usually, the multicolumn works perfectly, but, with this class, the text that is supposed to be in the merged cell ...
2
votes
1answer
204 views

Is there a way to add the “Part” section to the IEEE Transactions on Magnetics document class?

I am using the IEEE Transactions on Magnetics document class in LYX and am having difficulties with the "Part" section. All other sectioning types (section, subsection, paragraph, etc.) work fine, but ...
1
vote
0answers
95 views

Turn equation numbering to arabic letters in IEEEtran [closed]

The IEEEtran uses latin numbers for sections, i.e., I. Introduction.... Consequently, the equation numbering is of the form (I.1), (I.2), (II.1), (II.2).... How do i turn this numbering to ordinary (...
2
votes
1answer
259 views

Italic equation numbers for \IEEEeqnarray within theorem

Edit: I have changed the question to use a minimal example. When I use an \IEEEeqnarray inside of an italicized theorem environment, the equation numbers (tags) also become italicized. The same thing ...
3
votes
1answer
855 views

No numbers when using capt-of's \captionof for listings

I'm trying to use \captionof{lstlisting}{Pseudo Code} to obtain a listing with its normal caption "Listing 1. Pseudo Code", in an IEEEtran document. I want caption of instead of the caption= because ...
2
votes
2answers
548 views

How to centered the table caption in IEEEtran class file?

I need to place the caption of a table in the center in the ieeetran class file. Is there exist any way? I have tried a lot, but failed in every aspect. Any help will be appreciated. Thanks in advance....
4
votes
1answer
8k views

DOI in reference

I am writing a letter to IEEE EDL. They asked me to add DOI in the references. I am using IEEEtran style. The .bib file contains the DOI for each reference. But it is not displayed in the output. How ...
2
votes
1answer
571 views

Example environment for IEEE

I need an example in a paper for an IEEE workshop. There is no example environment in the template. How should I set it up? The document class is \documentclass[conference]{IEEEtran}.
1
vote
1answer
491 views

interaction between IEEETran, bibtex, and flushend

I had been using the flushend package to even out the final page, which contained references, but I think I need to drop that if I don't find an answer to this. It seems when using that along with ...
1
vote
1answer
358 views

Why is the BST hack for highlighting author name not working?

Following this (which is a compact form of this), I created this MWE. demo.tex \documentclass{article} \begin{document} \nocite{*} \bibliographystyle{IEEEtran2} \bibliography{pub} \end{document} ...
0
votes
1answer
2k views

How to use the algorithmic package with IEEEtran class?

I found this question explaining how to use algorithm2e package with IEEEtran class. However I would like to be able also to use the algorithmic package. For the following code: \begin{figure}[!t] \...
3
votes
1answer
685 views

IEEEeqnarray and space for equation number

I am using IEEEeqnarray to align long equations, but it seems it won't consider the width of the equation reference number when performing the aligningment, despite the documentation clearly stating "\...
1
vote
1answer
623 views

Use of the bibliography style IEEEtran.bst yields hyphenation warning

This bibliography style does not want to use Babel hyphenation patterns, but it should generate its own for the English language. On my current computer I am using Miktex 2.9 and I added all English ...
0
votes
2answers
5k views

Footnote on first page (IEEE Conference document)

I posted in the past, that I'm writing with an IEEE template for a conference. I want to add only one footnote on the first page. Look including image. \footnote{Software Engineering 2017, Beijing, ...
2
votes
2answers
3k views

Removing urls from bibliography, without editing .bst file [closed]

First of all, I have tried Disabling URLs in bibliography and it does not work. Secondly, I am not repeating Suppress certain URLS in bibliography as I prefer to not edit the bib file, which is ...
4
votes
0answers
227 views

IEEEtranbib, bibentry, hyperref - Simple example?

I am trying to make IEEEtranbib work with bibentry and hyperref, but I am stuck. MWE \documentclass[conference]{IEEEtran/IEEEtran} \usepackage{bibentry} \makeatletter\let\saved@bibitem\@bibitem\...
3
votes
1answer
4k views

Latex Font Warning after updating to TeXlive 2016

After updating to TeXlive 2016, I get the following font warning in the IEEEtran.cls file: ./IEEEtran.cls:458: LaTeX Font Warning: Font shape `TU/ptm/m/n' undefined(Font) using `TU/lmr/m/n' instead ...
1
vote
0answers
2k views

Force double column figure location in IEEETran

How can I force 2 column figure location in IEEETran. Obviously "!h" didn't work and when I tried using the "float" package's "H" mode, the figure just disappeared instead of being moved to the forced ...
2
votes
1answer
4k views

add multiple authors's footnote to springer's latex template

I am using a springer two column mode template, I tried to use footnotemark and footnote to add multiple author's common affiliation, but nothing worked for me. here's the template: %%%%%%%%%%%%%%%%%%...
2
votes
1answer
853 views

Using algorithm2e in figure environment

I am using algorithm2e to explain my algorithm and surrounding it within float environment for IEEETran class as suggested in How to use the algorithm2e package with IEEEtran class? Below is a sample ...
2
votes
1answer
3k views

Formatting a table in a two-column document

I am trying to write a paper in IEEE format which includes tables. It's a two-column document. But when I am trying to create the table it overlaps with material in the other column, like the ...
7
votes
2answers
10k views

No Line Break in Author Command? It goes off the page!

This answer by @AndrewSwann demonstrates use of the \author{} command. I am writing an article with a bunch of authors, and when I use this command, it goes off the page: How can I fix this? Using ...
0
votes
1answer
1k views

A problem with eps figure [closed]

I caused a problem when writing an IEEE paper with latex, I use the IEEEtran.cls. When I run the latex with "latex"-->"dvi-pdf", it works well. However, if I run the latex with "dvi-ps"-->"ps-pdf", ...
1
vote
1answer
465 views

How can I change the span between text columns in IEEETran?

A need to change the distance between the 2 columns of my article, in order to fulfill a conference specification. Namely, I have to set it to 14mm (0.55 inches). However, I can't figure it out. ...