Questions tagged [landscape]

{landscape} is one of the two most common types of page orientation, the other one being portrait.

Filter by
Sorted by
Tagged with
0
votes
1answer
48 views

How to list Supplementary Tables (table, longtable, landscape)?

I need to list Supplementary Tables separated from main tables. This is, to replicate exactly the answer from this post, but for tables, considering that I have different table environments (table, ...
1
vote
1answer
35 views

Start next landscape long table on the same page as where previous landscape long table midway ended

In the appendix of my thesis I have multiple consecutive landscape long tables. Quite a lot of them they end midway of the page. I would like to start the following table on the same page, instead of ...
0
votes
1answer
31 views

Tables and figures in landscape mode with endfloat

I would like to include both tables and figures in landscape mode in combination with the endfloat package. The problem is that, to my knowledge, I can assign the landscape environment only to either ...
2
votes
2answers
29 views

Vertically centering text in landscape mode tabular

I encounter a problem with vertically centering the content of my "big" table. I use tabular and I would like the text to be vertically and horizontally centered. Could you please help me ...
0
votes
1answer
48 views

Landscape table over multiple pages layout issues

I have some issues with a landscape table i split over multiple pages that i want to use in the appendix of my thesis. I incorporated it like this (in order not to mess up my main file): \...
0
votes
1answer
49 views

Geometry of landscape page by “typearea”

I insert some landscape pages in my article with the package typearea. Then I find that the text body at landscape pages are two small, too much horizontal margin spaces are wasted. Please see the ...
0
votes
0answers
36 views

Landscape orientation asymptote figure in latex

I'm learning how to draw figures with Asymptote and tried embedding this poster https://asymptote.sourceforge.io/gallery/poster.asy to a latex document. As you can see, the poster is landscape ...
1
vote
0answers
28 views

Section heading with landscape environment

I wonder how you can get your section heading sideways above a sideways figure in Latex, like in the picture below. Can someone help me? This is my code for the figure, using the landscape environment....
0
votes
1answer
53 views

Help with fancyhdr on custom page sizes

I am writing a report using fancyhdr for headers and footers. My report is mostly in A4 page, but there are some pages where I may need to fit bigger tables and images, so I manually change the pdf ...
0
votes
2answers
75 views

Longtable does not work

I have problems in splitting one table in 2 using landscape mode: I tried to generate it from tablesgeneraton to have it correct, but the longtable command does not work, and the table exit from one ...
0
votes
0answers
23 views

How to move table caption to a new page

\begin{landscape} \begin{table}[ht] \begin{center} {\scriptsize \resizebox{\textwidth}{!}{\begin{tabular}{rccccccc} \hline 1 & 2& 3 & 4& 5 & 6 &a & b \\ \end{...
1
vote
1answer
41 views

Full page figure in landscape alignment

I want to have more control over the placement of a figure in a landscape orientation. For some reason the usual options (t, b, etc.) have no effect in my document. Latex just places it at the bottom ...
0
votes
1answer
47 views

How to make a frame for a single page in landscape programatically for letter and A4?

I recently completed running an international conference. I hope to make certificates in a landscape orientation for the organizing committee, and some other attendees. In order to make everything ...
0
votes
0answers
139 views

KOMA not changing page sizes in the mid of the document - episode #2

I'm using MikTEX to create a kind of complex document: ~2000 pages, with different page orientations, embedded images, long tables, etc. Two days ago MikTEX received and installed a bunch of updates. ...
1
vote
1answer
32 views

Converting landscape table to portrait in thesis book format a4 size

I have a code like this where I made landspace document but I wanted to add this document to my thesis book which doesn't allow me to have landscape page so I request someone to help me change this ...
3
votes
2answers
62 views

Move a table in landscape mode

I have a table as below. I am unable to fit the table into a landscape page (I would like to increase the font to increase readability while its boundaries do not get close to the margins.) Moreover, ...
0
votes
2answers
42 views

Scaling/Size reduction large longtable to pdflscape

I have an overly large table converted with excel2latex. It may span several pages, but currently, it stretches far beyond the margins of my landscape, despite the columns under “Evaluation metrics” ...
2
votes
1answer
65 views

Landscape table and section/chapter title do not fit together on one page

For my appendix I need to make a table in landscape mode, since the three columns containg quite a lot information and it has to fit on one page. Rotation for the table works just fine with both ...
0
votes
2answers
42 views

Section title above large landscape table

I need your help. I am writing my dissertation with LaTeX (I am not a very experienced user), and I am inserting some stuff in the appendix. I have a fairly large and complex table in landscape mode, ...
1
vote
0answers
39 views

Table that may go to more than 1 pages

I have done many changes from the very beginning till the end and then with the help of another person here I have achieved the result that I wish, let's say more or less. In trial and error, I got ...
0
votes
0answers
30 views

Float positioning with pdflscape package [duplicate]

I'm using the pdflscape package to create a document with several sections that need to be in landscape. I am seeing strange behavior with figure floats. I would like to use htp for figure positioning,...
2
votes
1answer
59 views

Table exceeding one page

I have used the following code to fit a multi column table using landscape package. Now the data inserted is exceeding the length of the page and hence the data is not fitting. (the width is fitting ...
4
votes
1answer
46 views

How to change a certain page to be landscape in a document?

I have a figure that I would like to have in a landscape page while the other pages in portrait mode, and keeping the page numbering without rotating it. I have been trying the answers in How to ...
1
vote
3answers
65 views

How to rotated and span a large table over 2 pages?

For my Thesis i need to inlude a table with 25 portfolios. I was able to rotate the page, however to make it more readable it would be best if the lowest two section would continue ont he next page. I ...
0
votes
0answers
31 views

Landscape page has different dimensions than portrait

My question is duplicate of this. How to produce landscape page the same size like a portrait one? \documentclass[a4paper, 12pt]{article} \usepackage{pdflscape} \begin{document} \begin{landscape} ...
0
votes
1answer
53 views

What happened to my document? Space when landscape

I am sharing with you the code of one exercise of my homework. I need a landscape part because there is not enough space on the page for the words I wrote. However when I use the environment landscape ...
1
vote
2answers
50 views

Landscape table going off the page in elsarticle

I have a big table, which means i need to change to landscape orientation in an elsarticle document. The problem i have is the table goes off the page and I am not sure how to fix this. MWE below: \...
1
vote
1answer
31 views

Multi-page document with horizontal tables

I am composing a multi-page document that contains only tables. Pages are A4 (lettersize) in "landscape"(!) orientation, each page has only one table. I am using landscape environment: \...
2
votes
1answer
42 views

Turning Table Sideways

I am wondering how I would turn this table sideways, as all of the columns cannot fit when its on portrait. The table needs to be a 5X5. Thanks for the help. \begin{table}{11r11} \centering \resizebox{...
0
votes
2answers
76 views

resize table to fit landscape page

I was unable to fit the 2 data tables needed for my thesis in portrait mode and hence have put it in landscape mode but it is going beyond the page length. I have seen other posts on many latex pages ...
2
votes
2answers
27 views

How to display a horizontal table next to a page of text

I'm an entry-level LaTex user. I have a table in landscape orientation that spans a whole page, but as it's not very large, it would be nice to have the text next to it. Here is my minimum working ...
0
votes
1answer
50 views

define equal xshift or yshift for all nodes

I'm rather new to tikz and I'm drawing a flow chart based on a template. I'm currently defining xshift and yshift separately for every node: \documentclass[11pt,a4paper]{scrartcl} \usepackage{amsmath}...
2
votes
2answers
702 views

How to rotate a Markdown table to landscape? Solutions I've tried print the markup instead of the rendered table

I'm using Markdown to create a PDF via xelatex and pandoc. Here's my command line: pandoc -s combined.markdown --from markdown+table_captions+auto_identifiers --filter mermaid-filter.cmd --pdf-engine=...
1
vote
1answer
72 views

A3 Paper landscape in A4 portrait document with same headers and footers KOMA

I need to have 1 A3 Page in a A4 Portrait document and I want the header and the footer to look the same, to have the same margin, to be on the same height etc and as well to center the footer. ...
0
votes
0answers
16 views

Enlarged picture spanning in 2 opposite pages in landscape format

I'm creating a photography book in landscape format. I would like to achieve the effect that a picture spans across 2 opposite pages, so that it appears as an enlarged image stretched over the total ...
0
votes
3answers
47 views

Line break of table notes after first column in a long table

I am creating a long table using xltabular in landscape format using landscape. I add table notes using the tablenotes environment: \begin{landscape} \begin{xltabular}[l]{X X X X} ...
0
votes
1answer
37 views

Three Tables in Landscape model at equal distance from each other and the margins

I have the following code: \afterpage{% \clearpage% Flush earlier floats (otherwise order might not be correct) \thispagestyle{empty}% empty page style (?) \begin{landscape}% Landscape page \begin{...
0
votes
0answers
22 views

Moving page number just for landscape pages

I need to make a formatting edit to a document and frankly I can't figure out how to do so. Caveat: you're going to see what I want and say "that's a terrible idea, don't do that, it'll look dumb ...
1
vote
2answers
58 views

portrait page with section title, and “landscaped longtable”

I have the following landscaped longtable under a section: \documentclass{article} \usepackage{longtable} \usepackage{arydshln} \usepackage{pdflscape} \begin{document} \section{Landscaped longtable ...
2
votes
1answer
32 views

Page number and auto page break issue in two-sided landscape mode

I am making a math worksheet, but I am having issues with page number alignment and auto page break. Also, I would like to squeeze four tables in one page. So far, I am unable to fit three tables. How ...
2
votes
3answers
37 views

Can't fit an imported excel table in a page (overfull hbox and vbox)

Good evening to anyone. I'm trying desperately to fit this table into an horizontal page. As I've used excel2latex to import it, I'm using the array environment, and I don't really know what to do to ...
1
vote
0answers
47 views

Resolving landscape table bug

Regarding the solution proposed in this post Change page layout mid-document in lualatex Which resolves the issue regarding displaying landscape contents in RTL documents. This solution works only ...
1
vote
1answer
28 views

Where does this blank page come from?

This LaTeX document should have one (or two, now I'm using \lipsum) pages of A4 portrait, followed by one in A4 landscape. However, there's a blank landscape page before the one with the content, and ...
0
votes
0answers
14 views

How to make one page adapt a portrait orientation when the rest is in landscape

I am working on a document which is primarily in landscape. However one page contains a portrait image and I would like to display it in upright position. Basically I am asking if there is a reverse ...
2
votes
2answers
34 views

4 decimal place S table to 3 decimal % table

I have the following table which reports the values to four decimal places. However I wish to change it to 3 decimal places and in % format. For example, from say 0.9919 to 99.1. Any thoughts on how ...
1
vote
1answer
46 views

Header only on first page, smaller margins on subsequent pages with multicol and landscape

My current code is below. I want the header in this landscape document only on the first page, and not on any subsequent pages. Furthermore, I want to remove the big gap that happens when I suppress ...
0
votes
1answer
51 views

Page numbers in scrreprt KOMA

I have an scrreprt document where two pages in the middle are in landscape orientation and contain a longtable. I use pdflatex in case it makes a difference. My code is essentially: \documentclass{...
0
votes
1answer
39 views

Landscaped longtable not showing the page as landscape

I use the following, however the page does not come out as landscape and the first column title (ESG Features) is really odd, I would like it left aligned and ideally underlined if possible. To go ...
0
votes
1answer
30 views

Stretch wide landscape table to fit page

I am wondering if the following wide table can be stretched out to fit a larger portion of the page. The size of the table is okay, but it would be ideal to be a little larger. Any suggestions would ...
0
votes
2answers
56 views

Fit really wide table on one or two pages

Task description I have a pretty wide table that I am wanting to include and I am just not quite sure how to go about it. I have some dummy data representing the table I want to use below. I have ...

1
2 3 4 5
11