Questions tagged [lengths]

{lengths} is for questions dealing with measurements in TeX. If your question is about the spacing between document elements, use {spacing} instead.

Filter by
Sorted by
Tagged with
5
votes
1answer
852 views

Arithmetic operation between command arguments and latex parameters

I'm defining a new command that places two images one next to the other and I want to add an horizontal space between the two images which corresponds to one third of the space that remains blank. The ...
29
votes
1answer
2k views

Using elastic lengths — when do they work?

I was wondering why elastic lengths like \fill seem to work only under certain conditions. For instance if I write A \hspace{\fill} B I get A left aligned, B right aligned as wanted. If however I ...
11
votes
1answer
12k views

How do you increase headrule length in fancyhdr?

It's pretty well-known how to increase the headrule width, but how do I increase its length (i.e. let it run into the margin).
0
votes
1answer
287 views

Text overflows into graphics at bottom of page

I want to include graphics on every page after the title page but on the 2nd page the text flows into the graphics and I also loose the page number on that page. Subsequent pages are fine. Here is my ...
1
vote
0answers
499 views

geometry's bindingoffset seems to be ignored

The geometry's documentation tells: page 9: "bindingoffset removes a specified space from the lefthand-side of the page for oneside or the inner-side for twoside.", page 10 (caption of Figure 6): "...
2
votes
1answer
753 views

Difference between length and number (in the draftwatermark package)

I am using the draftwatermark package. According to the documentation, it is possible to set the horizental position of a watermark with the command \SetWatermarkHorCenter{⟨length⟩}. They say that <...
3
votes
1answer
479 views

Texts, lines and length

It is possible to set the width of the lines depending to text length (text aab's in MWE). Total length text aab's + line should be an equal. And I need also the "Text inside" on the same height as "...
3
votes
1answer
1k views

dotfill for length of text

I am trying to make some small dotted lines for the signature of different persons, with their printed names just below. I thought it would look great if the width and horizontal placement of the ...
8
votes
1answer
2k views

\columnwidth in cm

I have a silly question - i am using double column style \documentclass[english,a4paper,12pt, openany]{book} When I add a figure I usually put in \columnwidth and just let LaTeX to stretch it to the ...
2
votes
1answer
2k views

How to set scrlttr2 refvpos automatically based on address length

I am creating an letter options (lco) file that I will use for multiple letters. The scrlttr2 class is designed for a fixed placement of the address field, and places the date at a fixed position from ...
3
votes
1answer
147 views

Automatically calculate width

This is a question to Werner's answer to the question "How to draw arrows between parts of an equation to show the Math Distributive Property (Multiplication)?". Consider the following code: \...
2
votes
1answer
225 views

Converting lengths with lengthconvert and l3fp

The package lengthconvert "uses the modul l3fp to convert the length". But its conversions are totally off the charts: \documentclass{article} \usepackage{lengthconvert} \begin{document} \...
7
votes
2answers
17k views

What is the default length of \hrule?

When used without parameters, what varfiable controls the length of \hrule? I.e., how can I change the default length of \hrule, other than adding parameters to each instance -- say, to affect ...
1
vote
1answer
248 views

Is it possible to use mylatex or mylatexformat for documents with preambles almost the same?

I have documents of this form: \documentclass{article} \newlength{\variableLength} \setlength{\variableLength}{xxxx cm} \usepackage{package1} \usepackage{package2} \usepackage{package3} \...
19
votes
2answers
2k views

How to have a precise control on the size of each page?

I would like to produce a pdf document whose pages have various lengths and fixed widths. An easier situation The easiest case would be for instance: the first page has a length of 10cm all the next ...
0
votes
2answers
214 views

Accuracy of distance measures in geometry

In the following MWE, I set the distance from the edge of the paper to the body text to be 25mm. \documentclass[a4paper]{article} \usepackage[showframe, paper = a4paper, tmargin = 25mm]{geometry} \...
1
vote
2answers
125 views

Typesetting displayed equivalences and definitions of unequal length

What is the proper way to typeset in LaTeX, in display-mode, a series of equivalences and definitions of unequal lengths of sets ? Consider for this the following code that I used for a series of ...
75
votes
2answers
193k views

What is the difference between \hspace*{\fill} and \hfill?

In the memoir manual on page 183 ,this example is given: \begin{figure} \centering \hspace*{\fill} {ILLUSTRATION 1} \hfill {ILLUSTRATION 2} \hspace*{\fill} \caption{Example float with two ...
6
votes
3answers
665 views

Comparing calculated real numbers

"\ifdimless" can compare two real numbers. But, how can we feed the result of a calculation to this function ? \documentclass[]{article} \usepackage{tikz} \usetikzlibrary{calc} \usepackage{etoolbox} ...
2
votes
1answer
443 views

use \boxput (fancybox) as reminder: is there a way to change the relative coordinate system to the top of the box?

I use the fancybox's \boxput command to create reminder boxes in my documents. I like the fact about \boxput, that it lets you place a label above the box. This label is placed like a water mark, ...
3
votes
1answer
453 views

Get the width of a picture with Tikz

I 'm trying to make a presentation with beamer and I use Tikz to incorporate pictures at some places in my frames. For some reasons, I would like to fixe the heigth of a picture (contained in a node) ...
1
vote
1answer
294 views

Trim size as fundamental TeX value

What are the fundamental TeX length names, corresponding to trim size and offsets? I already know that \pdfpagewidth and \pdfpageheight will grab enough information to calculate the PDF MediaBox (in ...
4
votes
1answer
217 views

Length operation within a newtcblisting

Consider the following code: \documentclass[10pt,letterpaper]{article} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage[french]{babel} \usepackage{calc} \usepackage{tikz} \usepackage{...
1
vote
0answers
360 views

Geometry package: Lengths saved by default. Options for save/load/restore

The geometry package: Package lengths are not saved as lengths. Examples: layoutheight, tmargin The following only affect the complete layout: \savegeometry \loadgeometry \restoregeometry ...
3
votes
1answer
205 views

Computation of size in titlespacing

Consider the following example: \documentclass[11pt,a4paper]{book} \usepackage{lipsum} \usepackage{titlesec} \newlength{\textsize} \makeatletter \setlength{\textsize}{\f@size pt} \makeatother \...
16
votes
2answers
5k views

Length plus minus other length?

Consider the following example: \newlength{\textsize} \makeatletter \setlength{\textsize}{\f@size pt} \makeatother \setlength{\parskip}{12pt plus 1pt} % WORKS \setlength{\parskip}{\textsize plus 1pt}...
4
votes
1answer
2k views

How to change length of blue line in moderncv

I am writing my cv using moderncv; I come across to this automatic correction where sentences are split in 2 lines like so: What I would like to do is setting "Birth Date and Place" in the same line ...
12
votes
1answer
6k views

Why does changing \baselinestretch not change line spacing?

I have read that line spacing in a LaTeX document is controlled by the \baselinestretch macro, for example here. Setting \baselinestretch in the preamble does in fact change line spacing. When I ...
7
votes
1answer
3k views

Can I define a variable to scale with it several figures?

I have several pictures in my document, using the subfigure environment, the code is the following: \begin{subfigure}[b]{0.22\textwidth} \includegraphics[width=\textwidth]{pictures/...} \end{...
1
vote
2answers
656 views

How can I print a length of hsize (Horizontal size) in mm (millimeter)? [duplicate]

I am new to VTEX. How can i solve this?? \documentclass{article} \begin{document} \the\hsize \end{document} Output: 345.0 pt but i have to write a macro to calculate hsize in mm example: \...
2
votes
2answers
270 views

How can I print a length in centimeters in VTEX?

\documentclass{article} \begin{document} \newdimen\mylength \mylength=1in \the\mylength \end{document} Output is: 72.27 pt But i want to show output in centimeter using VTeX.
2
votes
1answer
125 views

Set width of tabular column to the width of tabular numerals

Take the following code: \documentclass{article} \usepackage[oldstyle, tabular]{libertine} \usepackage{array} \newlength{\period} \settowidth{\period}{9999--9999} \begin{document} \begin{tabular}{...
8
votes
1answer
115 views

Is it possible to adjust the “quantization” of allowable skip lengths?

In plain TeX and derivative formats, the concept of stretchable/shrinkable length, AKA a glue or a skip or a rubber length exists, in general defined as <dimen> plus <stretch-dimen> minus ...
2
votes
1answer
194 views

Why is \glueexpr used in etoolbox's \deflength instead of \dimexpr

Consider the following snippet from etoolbox: \newrobustcmd*{\deflength}[2]{% \ifundef{#1} {\etb@noglobal\etb@err@nolen{#1}}% {#1\glueexpr#2\relax}} Maybe I do not understand the ...
2
votes
1answer
179 views

Resetting \parskip to 0pt “seems” to be ignored by \par

I was revisiting old code and rewriting things in what I thought was a more elegant manner, but I got unexpected results. I have the following code which seems to do exactly what I want it to do ...
5
votes
3answers
675 views

Multicolumn within tabularx: how to get p{'lengths'} right

I am trying to have the lipsum text fill the two cells to the right of the vertical ruler, without exceeding the table. My code is now: \documentclass[a4paper,11pt]{article} \usepackage{lipsum} \...
1
vote
2answers
108 views

Functions not working well together

I'm developing a interface for setting and changing distance parameters for a package. These distances are stored as strings so that the user can specify them in em and ex units if they want and they'...
2
votes
1answer
291 views

Why are the skip lengths ignored in align?

I created a new command \mathloose that stretches the spacing in an equation by suitably adjusting \thinmuskip \medmuskip and \thickmuskip lengths. The command works just fine in \[ \] and \( \) but ...
3
votes
1answer
916 views

Dynamic length variable with argument? (like “\setlength{\foo}[1]{0.5+#1*0.5}”)

Is there a way to define some kind of a length function that takes an argument, sort of a mixture between \newcommand and \setlength? The following example should illustrate what I want. (I'm using a ...
5
votes
1answer
309 views

How can I readjust TikZ's dimension variables to fit mid-document dimension change?

Question How can I readjust TikZ's dimension variables to fit a mid-document dimension change as in this example and using the TikZ drawing from here. Problem TikZ coordinates are not where they ...
10
votes
5answers
2k views

Boxes automatically sized to reach end of line?

I'm setting up a little test, which includes empty boxes for students to write their answers. The boxes start at different places on the page, but I'd like - for neatness - each box to reach to the ...
10
votes
2answers
310 views

Displaying rubber lengths in arbitrary units

Based on this question, I know how to show regular lengths expressed in arbitrary units. However, I need to do the same for rubber lengths (showing the plus and minus) and the printlen package doesn'...
5
votes
2answers
92 views

How to set a distance that rescales with the font [duplicate]

I'm trying to set a distance which is relative to the font size. The problem is that the distance is reused several times in the document, potentially in environments with a different font size. In ...
1
vote
0answers
55 views

Maximum length of last line in paragraph [duplicate]

Is there a LaTeX parameter (e.g., a penalty parameter) or any complex solution that can be setup maximum length of the last line in the all paragraphs throughout the text? Let's say, 2 em horizontal ...
9
votes
2answers
2k views

Using powers in \dimexpr

The code \documentclass{memoir} \begin{document} \fontsize{\dimexpr 1.2^{3} 10pt}{\dimexpr 1.2^{3} 10pt}\selectfont Hello TeXworld. \end{document} does not work. Why not? EDIT: I need a solution ...
15
votes
3answers
584 views

How to print a length accurately and with user-controlled rounding?

Tried the printlen package, but it seems to not understand what 2.5in means: \documentclass{minimal} \usepackage{printlen} \uselengthunit{in} \begin{document} \newlength{\advertwidth} \setlength{...
3
votes
1answer
2k views

LaTeX equivalent of \wd [closed]

Please consider the following code: \newsavebox{\mybox} \savebox{\mybox}{some text} \newlength{\widthmybox} \settowidth{\widthmybox}{\usebox{\mybox}} Is \widthmybox then equivalent to \wd\mybox?
6
votes
2answers
429 views

TeX/LaTeX: Macro for getting a length as number

I would like to write a macro getlengthin to get a length or dimen as floating point number in a specified unit. Here is what I have created so far: \documentclass{article} \usepackage[nomessages]{...
4
votes
1answer
2k views

scrlttr2 location positioning question

I would like to have the text of the variable location to be right aligned with the text of the main body. So I tried to redefine the length lochpos to be the same as refhpos, because the margin on ...
5
votes
1answer
492 views

What's the meaning of the command \number and when to use it? And some confusion about the following code

\setcounter{numofgaps}{\numexpr\number\value{numofboxes}-1} \setlength{\truetextsectionwidth}{\textsectionwidth-\number\value{numofgaps}\gapwidth} The above code is a snippet from the answer of How ...

1
4
5
6 7 8