Questions tagged [libertine]

{libertine} is about the Linux Libertine font which can be loaded with the package of the same name.

Filter by
Sorted by
Tagged with
1
vote
1answer
57 views

Different spacing, hyphenation and page breaks with pdfLaTex + Libertine vs. XeLaTeX + Libertinus

I have a rather long document (approx. 300 pages) which I have started to create with pdfLaTeX and Libertine, but now I have switched to XeLaTeX and Libertinus for several reasons (mostly math and ...
0
votes
0answers
64 views

How to typeset indicator function in acmart class

I want to write a special 1 character to denote the Indicator Function. The class loads Libertine fonts and I think there is no option to override them. See Section 3.8 of documentation. The ...
0
votes
0answers
30 views

Many errors when using frenchmath option with newtxmath.sty

I am attempting to typeset a document using newtxmath.sty using the libertine and frenchmath options. The minimal example below throws 53 errors, all of the "missing control sequence inserted" or "...
0
votes
1answer
44 views

How to get non-German diaeresis in Linux Libertine

I am using Linux Libertine with XeLaTeX extensively, however the German umlauts are irritating me – those letters don't fit well in Hungarian typography. Up until now, I have used a patched OpenType ...
7
votes
2answers
140 views

xelatex & libertine: \renewcommand\ttdefault no longer works

This MWE \documentclass{article} \usepackage{libertine} \renewcommand\ttdefault{lmtt} \begin{document} foo \texttt{bar} \end{document} previously (say, about one year ago) typeset bar with lmtt if ...
1
vote
1answer
43 views

Libertinus, backslash in text

Does libertinus/libertine just not have a textmode backslash character? (That character must be in the font somewhere, is there a way to access it?) Minimum working example: \documentclass{...
0
votes
0answers
36 views

convert uppercase numbers with otftotfm [duplicate]

I'm trying to get uppercase numbers for Linux Libertine/Biolinum with PdfLaTeX because Libertine font numbers have a different height than text and I think it doesn't look nice in headers and captions....
1
vote
1answer
101 views

uppercase numbers in chapter headers and captions

I'm trying to get uppercase numbers for Linux Libertine/Biolinum with PdfLaTeX because Libertine font numbers have a different height than text and I think it doesn't look nice in headers and captions....
0
votes
1answer
49 views

Bold math with \usepackage[libertine]{newtxmath}

I am not sure why when I try to use \usepackage[libertine]{newtxmath} and have an equation with boldsymbol, this message appears: Font shape OT1/txr/sb/n' undefined(Font) usingOT1/txr/m/n' instead ...
0
votes
0answers
55 views

Libertine font numbers have a different height than text in mathmode

The number in libertine font have different height than capital letter. In this discussion : Libertine font numbers have a different height than text, the answer works fine in textmode but it doesn't ...
3
votes
2answers
166 views

DeclareMathOperator does not respect math font

I use the Libertine font for text and math. If I declare a new operator with \DeclareMathOperator*, the font used to typeset the operator is not Libertine. For example: \documentclass{article} \...
2
votes
0answers
249 views

TeXLive 2019 and Libertine: OpenType feature warnings

Since I upgraded to TL2019, I get a lot of opentype feature warnings. For example for \documentclass{book} \usepackage{libertine,fontspec} \begin{document} ads \end{document} I get OpenType ...
13
votes
1answer
468 views

Libertine font numbers have a different height than text

Currently I am writing my thesis and I want the libertine font because for example the Capital "ß" and other stuff. Following to my question, is it possible to set the numbers height on the same ...
3
votes
2answers
715 views

“Different” looking question mark

I'm in a situation where I have a concept in my document that is traditionally represented using the question mark ?. However, for visual clarity, I would like to differentiate between the ordinary ...
2
votes
0answers
109 views

Combining multiple diacritics in Linux Libertine [closed]

In several Native American languages, nasal vowels are marked with an ogonek and can take an acute accent. I'm using XeLaTeX to put together a proceedings volume, and for some reason, I cannot get a ...
3
votes
1answer
129 views

Problems with ligature and libertine font -

I cannot post a comment under my previous question so (i fixed some files because i misunderstood somethings, but there is a problème with tt => fl in sffamily not smallcaps and it seems it cannot do ...
7
votes
1answer
286 views

Ligatures with Libertine: issue with pdflatex (and Windows)

If you compile the piece of code given below using pdflatex, then open the resulting PDF file with your preferred viewer, copy the word "efficient" and paste it in a text editor, you will read "...
1
vote
1answer
60 views

How to change the scale of main text without affecting math text or viceversa?

I'm using libertine package for the main text of my work and I load fourier package before libertine in orther to get the math text with the Utopia font just because I like it. Typing \documentclass{...
16
votes
1answer
745 views

Why Does Word Spacing Change Drastically When Using Libertine/Libertinus with the Various LaTeX Engines?

I was just messing around in LaTeX with the libertine and libertinus packages, and noticed that switching from LaTeX to XeLaTex to LuaLaTeX all produced PDFs that were mostly the same length, except ...
2
votes
1answer
92 views

Libertine package options with boldface and emphasis change numeric text

I've just installed and updated MacTeX and am recompiling files for the university courses I'm teaching this year. I'm experiencing a really peculiar problem with numeric information when I set ...
6
votes
3answers
376 views

Using package 'libertine' overrides my sans-font with Libertine instead of Biolinum

I'm trying to use the libertine package instead of using the installed Libertine fonts on my machine (macOS). It seems that after adding the libertine package, it overrides my sans-serif font and uses ...
3
votes
1answer
116 views

Root index \sqrt[n]{x} misaligned with libertinust1math

I'm porting all my libertine-based documents to use \usepackage{libertinust1math} instead of \usepackage[libertine]{newtxmath} and a side effect seems to be the misalignment of the n-th root symbol: ...
5
votes
2answers
652 views

Differences between libertine and libertinus packages regarding pdfTeX

Until now I did not switch to LuaTeX and prefer pdfTeX, because it's faster. Since some years I've been using the old libertine-legacy package, e.g. because I need the command \libertingeGlyphand \...
1
vote
1answer
281 views

Tufte-Latex libertine text and math font incompatibility issue

I'd like to write a substantial math document with the tufte-book class, with a few minor changes. My first issue is that, after loading my preferred font of libertine, along with newtxmath to get ...
1
vote
1answer
134 views

Biolinum in memoir's chaptitlefont?

For pdflatex i use: \documentclass[openany,twoside,12pt]{memoir} \usepackage[utf8]{inputenc} \usepackage[T2A]{fontenc} ...
1
vote
1answer
484 views

Bug with \setmathfont range?

I am using XeLaTeX and unicode-math with the Libertinus Math font. Some symbols are missing therefore I'm using the range command. Then I get an unwanted crossed-square symbol beside big curly braces. ...
4
votes
2answers
747 views

\prime position too low, if in \frac denominator

If used in the denominator, the \prime symbols are lower than in the numerator. This becomes even more pronounced (and annoying) if Libertine/Libertinus Math is used. Why is that? Can this somehow be ...
1
vote
2answers
2k views

ACM's acmart clashes with libertine

I'm preparing a document using the acmart.cls class file of ACM. When I compile, it keeps showing me this warning: Class acmart Warning: You do not have libertine package installed. Please upgrade ...
1
vote
1answer
132 views

Glossaries and \libertineGlyph and \makebox

I am having troubles using the Glossaries Package with some self-built hebrew characters using \libertineGlyph and \makebox. An entry looks like this: \newglossaryentry{{ע\makebox(-1,8)[r]{\...
2
votes
1answer
377 views

Problem with sans serif using LibertinusT1math

I like to use the text font Libertine and math font LibertinusT1Math. Is there a way to setup the math font LibertinusT1Math globally to sans serif? In my example I tried out a local switch \begin{...
7
votes
2answers
699 views

Libertine + pdftex: using 'Th' and 'Qu' ligatures with T1 font encoding

Context: My document uses the libertine package and I process it with pdfTeX. T1 encoding is better than OT1. A LY1 encoding exists but is less common. Problem: For reasons explained above, I use ...
0
votes
0answers
121 views

No greek small caps with Libertine (pdflatex)

I'm trying to get libertine small caps to work with greek, with the following MWE: \documentclass[a4paper,12pt]{report} \usepackage{geometry} \usepackage[LGR,T1]{fontenc} \usepackage[utf8]{inputenx}...
4
votes
2answers
200 views

How to horizontally 'squish' a font?

Context: In my document (compiled with pdfLaTeX), I use the libertine package and eponymous font. At some point, I want to use a monospaced font (for in-line code snippets, and URLs). Problem: Even ...
2
votes
1answer
647 views

newtxmath + Libertine + fontspec

For a document I'm writing with XeLaTeX, I have to use Times New Roman as a main font. For math environment only, I'd like to use newtxmath with Libertine font. For my TexShop 2016 I installed ...
2
votes
2answers
242 views

How to get the alternate open g with unicode-math and Libertinus Math?

I was using newtxmath with the libertine option (so Linux Libertine) with pdflatex engine before, but switched to unicode-math in xelatex. newtxmath provided me with a nice open italic&...
2
votes
1answer
182 views

Libertine fancy fractions not working with LuaTeX

Here is my code. \documentclass{article} \usepackage{fontspec} \setmainfont[Fractions=On]{Linux Libertine O} \begin{document} % \addfontfeatures{RawFeature=+frac} 1/2 3/4 5/6 7/8 9/10 11/12 31415/...
6
votes
3answers
562 views

‘LaTeX’ logo with kerning issue and not scaling properly

I recently discovered that the \LaTeX command does not have proper kerning between the first ‘L’ and the ‘A’, the ‘A’ looks too thin (like fake smallcaps, simple downscaling). Also the logo doesn't ...
1
vote
2answers
224 views

How to find all slot numbers for a given font's math glyphs, e.g. Linux Libertine

How to change the font of math operators led to me wanting to find the slot numbers needed to redefine all possible math operator symbols. MWE: \documentclass{standalone} \usepackage{libertine} \...
2
votes
1answer
457 views

Using “Libertine Display” as the main font in a beamer document

In a beamer document with the serif font scheme, I would like to use the "Libertine Display" font as a lighter alternative to the standard "Libertine Regular" (see http://www.linuxlibertine.org/index....
2
votes
2answers
217 views

Linux Libertinum not avaiable with XeLaTeX?

Can anyone tell me, why Linux Libertine is not used after creating the pdf of the following code? \documentclass[twoside, paper=A4,11pt]{scrreprt} \usepackage[ngerman]{babel} \usepackage{xltxtra} \...
0
votes
1answer
135 views

How do I use package libertine from a class for LuaLaTeX?

Here is a small class lib.cls: \NeedsTeXFormat{LaTeX2e} \ProvidesClass{lib}[2017/03/17 lib] \RequirePackage{libertine} \LoadClass{article} which with pdflatex works fine when tested with \...
3
votes
1answer
151 views

How to enter a Polish l in acmart document class?

I must use the acmart package for the paper. Writing "Micha{\l}{}", I obtain a space before "l" in the output pdf file: "Micha l". MWE: \documentclass{acmart} \begin{document} Micha{\l}. \end{...
2
votes
2answers
4k views

Libertine Font not found (texLive)

I am not an expert in Latex, so I'm sorry if I miss some information I should give you or if I'm missing something basic. I have tried to download and install the "Libertine" package from CTAN as I ...
6
votes
1answer
2k views

What does \renewcommand*{\rmdefault}{fxlj} exactly do?

I'm writing a document with multiple hundred of pages and noticed some glitches with the selected font I use. I'm using a template provided by the institute I'm working at. The font I have chosen is ...
7
votes
4answers
519 views

Math digits are rendered in CM when using libertine and newtxmath with XeLaTeX in TeX Live 2016

I’m trying to use Linux Libertine in both text and math mode with XeLaTeX in TeX Live 2016. Back in TeX Live 2014, I was able to achieve this using libertine and newtxmath packages, as suggested in ...
1
vote
0answers
311 views

LinLibertineT font not found but available in filesystem [duplicate]

The following minimal not-working example (mnwe) gives me an issue with the used libertine font: \documentclass{article} \usepackage{libertine} \begin{document} \section{Hello World} Lorem ipsum, ...
14
votes
3answers
1k views

When should package fontenc be used with pdflatex?

I have been using package fontenc with the following invocation, mainly because of what I read here. \usepackage[T1]{fontenc} But I've noticed that I lose some of the ligatures with the libertine ...
5
votes
3answers
628 views

Libertine and TIPA Sans Serif

My goal is to get the tipass (that is, TIPA Sans Serif) font to work with the libertine package. Using the following, I get computer modern (as expected) with TIPA sans serif: \documentclass{article} ...
0
votes
0answers
52 views

Extra space with libertine package [duplicate]

I'm trying to compile this simple document with PdfLateX-MikTeX 2.9, but there's an unwanted extra space between regualr and bold sentences. \documentclass[a4paper, twocolumn]{article} \usepackage[...
2
votes
2answers
338 views

How can I “fake” a Mono Bold Libertine?

I would like to typeset some listings in Libertine/Libertinus Mono, but I've set the listings package to typeset the (octave/spice) language keywords in boldface, and these fonts (otherwise excellent, ...

1 2 3 4 5