Questions tagged [linguex]
is a package for formatting numbered examples as used in linguistics.
116
questions
0
votes
1
answer
28
views
Consistent numbering of linguex-examples across chapters
I am using a template for my thesis, which imports separate .tex files for each chapter into the main.tex.
Using linguex, my examples start to renumber from (1) each chapter and I cannot seem to ...
3
votes
1
answer
49
views
Referring to selected linguex sub-examples without parentheses
This is a follow up to the question (and the answer) here.
I have the same issue as OP, in that I cannot use parentheses around example numbers that are placed within parentheses in the text. Unlike ...
1
vote
1
answer
91
views
Using a simple tree inside a Linguex environment
I'm trying to copy of linguistic rule by Zubizarreta (1998) (see attached picture). I would like to provide a minimal example but I'm lost...
I'd like to use a linguex environment and tikzpicture ...
2
votes
1
answer
95
views
Glossed examples with line breaks at specifc points using linguex
I'm writing a linguistics thesis using LaTex and having trouble with glossed examples.
I'd like to add glossed examples of poetic texts with line breaks at specific points, which should look like this:...
2
votes
1
answer
50
views
parentheses of numbering got lost after \counterwithout command
In linguex package, I want a continuous numbering of examples across chapters, thus I added the command \counterwithout{ExNo}{chapter}. However, the parentheses of the numbering got lost in the second ...
2
votes
1
answer
182
views
Gloss command and spaces
What is wrong with my \coolgl{}{} gloss command (a clone of cgloss4e's \twosent, and therefore, having brace-delimited arguments and being \hfill-compatible), which produces those unwanted spaces in ...
0
votes
1
answer
96
views
Creating a command equivalent to a \kern, for glosses
I am using gb4e for glosses inside the linguex environment.
In order to identify word-units, we have to input a space, not only after each unit we want to gloss on its own, but also after the ...
1
vote
1
answer
50
views
Flushleft vs raggedright and line ending in linguistic examples [duplicate]
(Note: this is related to How to fix spacing with multi-line cgloss4e examples?)
I am trying to typeset linguistic examples with LaTeX, and in an a5 page setup. I am using linguex and cgloss4e. I need ...
2
votes
1
answer
82
views
Typgloss small capitalization on glossing third line
I use a package called typgloss to automatically put into small capitals linguistic glosses that are in uppercase.
The problem is that it works when there is only one line to gloss, but does not work ...
0
votes
0
answers
61
views
Cross-Refs: Sublabel-Skipping Variants
While cross-referencing linguistic examples, I am using zref to define commands for referring to pairs or ranges.
For each command I have two "skipping" variants mainskip and maxskip, meant ...
0
votes
1
answer
99
views
Using \zref in arguments of \ifnum (ranges)
Using zref I want to define a clever cross-ref command for ranges \clevestrip{ref1}{ref2} which returns a "stripping" string (1ab) if theExNo is equal for ref1 and ref2, and only prints ...
0
votes
1
answer
62
views
Refer to a specific token of a cross-ref label / Clarifications on refcount and zref
First, before any downvoting, I am aware of the existence and content of this post https://tex.stackexchange.com/a/577464/262813 and let me point out that I am not asking this question out of nowhere, ...
1
vote
1
answer
120
views
Skipping non-numeric part of counter label in local Cross-referencing
When quoting linguistic examples from authors inside a quotation, I like to use a special label specifying the name of the author. (I enclose it between square brackets but it will not appear here ...
0
votes
1
answer
87
views
Auto infra/supra with Linguex examples
I'm trying to make this work with Linguex:
https://tex.stackexchange.com/a/360869/262813
But I always get "infra".
\documentclass{report}
\usepackage{linguex}
\usepackage{etoolbox}
% ...
1
vote
1
answer
175
views
Four levels of examples
Linguex only allows for 3 levels of examples, but I need to be able to reproduce this (except I do not need first level label to include chapter number or be flushed right).
I want to keep local ...
1
vote
1
answer
475
views
Adding a line of text in glossed examples
Here's the code I'm working with (you need cgloss.sty to run it):
\documentclass[11pt]{article}
\usepackage{linguex}
\usepackage{cgloss}
\begin{document}
\ex.
\ag. This is a sentence. \\
a b c d\\ \...
0
votes
1
answer
104
views
Space between label and subexample with Linguex
I cannot increase the horizontal spacing between the label and the subexample, which is problematic with large grammaticality judgments.
\documentclass{article}
\usepackage{linguex}
\begin{document}
\...
0
votes
0
answers
52
views
Understanding some aspects of the philex package
In Philex, you can refer locally to an example (2b) by just typing
\rnx{label} and it will return just (b), otherwise just type \rn{label} and it returns (2b).
Here is the syntax of the two commands:
\...
0
votes
2
answers
288
views
How to adapt \crefrangelabelformat to subexample formatting?
I would like to be able to redefine something which is supposed to be defined in the preamble.
In this example and in relation to this question :
Cross-referencing: more sublevels, and presets,
I want ...
4
votes
0
answers
282
views
Cross-referencing: more sublevels, and presets
I'm typing a lot of linguistic examples and I would like label formatting to gain flexibility, i.e. setting up presets would be great.
That is, I'd like to be able to have ready-to-use setups ...
0
votes
1
answer
95
views
Obtain (1)‒(3) style when referring to ranges of examples, when default \crefrangelabelformat has no parentheses
I need \crefrangelabelformat to be without parentheses, so I can type 1‒3 when in an "already between parentheses" context, as in (for this issue, see 1–3 and following examples).
But then, ...
0
votes
1
answer
77
views
Unwanted blank line / vertical space with Philex
All is in the title, there is a blank line between (1a.i) and (1a.ii).
This happens when the line is long to the point it would soon break.
Here the geometry package is used to set margins, which may ...
1
vote
1
answer
92
views
Using Philex how can I change the spacing between subexamples?
Please, can someone explain how to patch Philex to customize the spacing between examples, subexamples and subsubexamples, respectively.
For example, if I want spacing between subexamples but no ...
0
votes
1
answer
308
views
Advanced Cross-Referencing with Linguex/Philex: Skipping and Stripping
\documentclass{report}
\usepackage{philex} % Includes linguex. Only loading it for \phildashes.
\usepackage{cleveref}
% Referring to Subexample Ranges
\crefname{ExNo}{}{}
\crefname{SubExNo}{}{}
\...
4
votes
1
answer
106
views
Using the word "write" as a label makes compilation crash
Took me all night (literally) to figure out.
Compilation was failing one time out of two, with the following original error (line 12) : "Bad space factor (0)".
That was crazy because ...
2
votes
3
answers
358
views
Refer to a range of subsubexamples
I use Cleveref to refer to subexamples such as "2a–c".
Now I want to use crefrange to refer to 1ai–ii as well.
\documentclass[a4paper,12pt]{report}
\usepackage{philex}
\usepackage{cleveref}
...
1
vote
1
answer
44
views
How to retrieve the index of a certain sentence. I am using linguex
I am using the linguex package that can index sentences throughout the document automatically. However, very often, I will need to add example sentences, which will change the indices of all the ...
1
vote
0
answers
69
views
Aligning material in delimiters within linguex examples
I'm trying to put trees (drawn with tikz-qtree) inside interpretation function brackets (scaled to the tree as suggested here (https://tex.stackexchange.com/a/133465) within a linguex example. ...
6
votes
1
answer
115
views
Linguex Exlabelwidth/sep doesn’t work with Brill font
The combination of linguex.sty and Brill Roman font via fontspec.sty stops examples from aligning properly. When the label gets too wide (e.g., (108)), the example text ends up directly after the ...
0
votes
0
answers
27
views
Using hfill with cgloss4e [duplicate]
This answer shows how to use \hfill in glosses within linguex. I can't seem to load "cgloss.sty" that is mentioned in the answer to Overleaf (by adding usepackage{cgloss} in the preamble -- ...
3
votes
2
answers
251
views
Numbering of linguex \ag. starts erroneously with a dot
I try to number my examples with numbers and letters. Unfortunately the numbering starts only from the second point with a.) but the first example is only a dot. After some experiments with taking out ...
2
votes
2
answers
203
views
Problems with linguex regarding spacing
I have a problem regarding changing values of parameters of linguex. In the documentation it says that you can change the value of \Extopsep, which is responsible for spacing before and after the ...
2
votes
1
answer
132
views
Use custom font for numbers in linguex examples
I have a custom font specifically for numbered lists -- it renders the numbers in an enumeration in a nicer way than the standard main font. Once I've loaded the font into a new font family which I ...
2
votes
1
answer
268
views
Linguex: gloss alignment with (square) brackets
I noticed that linguex aligns the first word of a gloss to the square bracket, and not to the actual word within the bracket.
Here's a part of my document (I copied pasted all the packages I'm using ...
0
votes
0
answers
32
views
Devanagari example with package linguex
This is an MWE formed with package linguex, for having numbered examples. I have also added an English example for the comparison.
%!TeX TS-Program=xelatex
\documentclass{article}
\usepackage{...
1
vote
1
answer
468
views
linguex [judgment symbol]
I was wondering how to specify other judgment symbols besides *, ?, %, and # under \usepackage{linguex}.
\ex. \a. *This is ungrammatical.
\b. $\checkmark$This is grammatical.
\c. (*)This ...
1
vote
0
answers
336
views
More than two glossing lines linguex
I am new here. I need some help with the use of linguex. I want to be able to make more than two even up to four glossing lines with that package like in the pdf here. But I fail to do it. Would ...
2
votes
1
answer
911
views
Continuous numbering of examples in footnotes within a chapter (and across chapters) in documentclass [report]
I am writing in the class [report] and using package linguex for numbered examples in main text and in footnotes. I need to make my examples in footnotes numbered continuously. The issue is that ...
0
votes
1
answer
552
views
How to make linguex not number an example?
I would like to have an example without a number in parentheses on the left. Is it possible?
2
votes
1
answer
31
views
linguex in uclathes [duplicate]
\exi. environment sends `undefined sequence' error. How can I fix it?
Here is the code of the main tex file.
\documentclass [PhD] {uclathes}
\usepackage[normalem]{ulem}
\usepackage{linguex}
\begin ...
0
votes
1
answer
170
views
Print example with same number as previous example, but new sub-number in linguex
How do I get the following output using linguex:
(2) a. James sang to himself
b. James didn't sing to himself.
"Lorem ipsum dolor sit amet, consectetur adipiscing elit.
(2) c. James would not ...
3
votes
1
answer
88
views
installing linguex into a main tex thesis file
The latex file has problems installing/using the linguex package in a ucla thesis latex template (uclathes) (downloaded from GitHub). I inserted it in a preamble of the mother tex file, but it keeps ...
0
votes
0
answers
200
views
Footnotes not working with linguex and leipzig package
The question says it all. I am using package leipzig for glossing and linguex for examples. This is the code.
\documentclass[8pt]{article}
\usepackage{leipzig}
\usepackage{linguex}
\begin{document}
\...
1
vote
1
answer
199
views
the second example is indented in linguex
I'm new to LaTeX so excuse my naive question. I use \usepackage{linguex} to generate linguistic examples but when I try to write two or more examples, the second one is indented. How can I make all ...
1
vote
1
answer
199
views
`linguex` numbered list embeddings
I'm using linguex and need a numbered list with four levels of embedding. I want to be able to have a custom number bullet (label) for the fourth level of embedding as well, and to be able to cross-...
4
votes
1
answer
521
views
Referring to selected linguex examples without parentheses
How to refer to selected linguex example numbers without parentheses? The editors want me not to use parentheses around example numbers that are placed within parentheses in the text. Like in the ...
3
votes
1
answer
241
views
How to get transparent examples in linguex
In a slide I want to explain each linguistic gloss point by point. When focusing on one sentence, I want the rest to be made transparent(translucent?), as would happen here with itemize(taken from ...
3
votes
2
answers
128
views
linguex forest in multicols larger than margin
I'd like to have two forest in one row. Unfortunately it is slightly over the page margin. I am new in latex. Do you have any suggestions for me?
\documentclass[a4paper,12pt,DIV=15,BCOR=12mm,oneside,...
6
votes
1
answer
274
views
linguex - modifying labels with a bar/prime notation
I am working with the linguex package for linguist examples/data.
Now I would to have a number of sentences – each being their own example – and underneath I would like to have e.g. syntactic ...
1
vote
0
answers
42
views
Linguex numbers turning into dot over dash symbols [duplicate]
I'm experiencing problems with Linguex. For some reason, weird symbols are appearing in some of my examples. The relevant part of the code is given below and the output is in the screenshot. Thank you ...