Questions tagged [minitoc]

{minitoc} is a package that facilitates creating 'miniature' {table-of-contents} on a per-section, or per-chapter level.

Filter by
Sorted by
Tagged with
0 votes
0 answers
29 views

Minitoc for \appendix

I want my appendices to look like that in the toc (Appendix as a \chapter, not a \section and "Appendix" before the title): Apendix A Example 1 A.1 Subtitle 1 A.2 Subsubtitle 1 Apendix B ...
hofmannj's user avatar
0 votes
0 answers
25 views

How to generate a partial Table of content in Overleaf?

I have been struggling to find a way to generate a partial "table of content" in overleaf. Let's say that in my manuscript i have a global table of content with all chapters, sections and ...
T.victor's user avatar
0 votes
0 answers
19 views

misalagnied subsubsection in \localtableofcontent

I am writing a long document with depth 4. in the table of content I could make a clean alignment for the sections: However when using \localtableofcontents, I wanted to have the combination of the \...
Linda's user avatar
  • 1
0 votes
0 answers
16 views

How to remove subsections from mini table of contents using the minitoc package

Currently my minitoc is showing all sections, subsections, subsubsections for a given chapter. I would like to only show the sections. \minitoc \section{Introduction} \section{Second section} \...
Ishan Mehta's user avatar
1 vote
1 answer
45 views

Suppress non-numbered sections from global toc and put into local toc

I am using \documentclass{book}. There are 6 chapters. The first 4 have numbered sections, created using \section{}. The last two have no numbered sections, but I artificially add several to toc using ...
RSe's user avatar
  • 13
0 votes
1 answer
29 views

Change the name of local table of contents (article class, minitoc package)

I recently manage to get a local table of contents for my \appendix with the package minitoc but I want to change the name of it to make difference between the \parttoc of my \appendix and the ...
Tony's user avatar
  • 101
0 votes
0 answers
18 views

TitleToc + ThesisTemplate

I am using the following Thesis template, and would like to have individual tables of contents for each chapter. Doing this with \minitoc seems to require manually changing the minitoc counter for ...
Gesbesgue's user avatar
0 votes
0 answers
46 views

Table of contents with horizontal lines like table

In my thesis, I have to change the table of contents layout according to the following picture. Being not so skilled in latex I can't get a way out. The codes of different people at StackExchange are ...
Optimist Optimizer's user avatar
1 vote
1 answer
53 views

Minitoc on Koma-script (scrbook) class with greek language

I'm making a book with the koma-script (scrbook) class and I need to add a minitoc at the start of every part and chapter. I found a solution with this post, however it doesn't work with the greek ...
Thibaud Hulin's user avatar
0 votes
1 answer
58 views

`minitoc` is not working and the display of `3-column-index` is something wrong

I find the latex format in principles_of_statistical_analysis_free_v1.0.pdf is compact and elegant, which has 2-column text, minitoc for each chapter, 3-column index, etc.; and I want to reproduce it ...
John Stone's user avatar
0 votes
0 answers
66 views

Include a chapter index (package minitoc) in the template kaobook

Good afternoon, I am currently working with the kaobook template (download link: https://www.latextemplates.com/template/kaobook). In said template, I am trying to set up a chapter index using the ...
Dastru's user avatar
  • 25
1 vote
0 answers
43 views

How to change the width of minitoc rule

I want to change the width of my minitoc rule as it exceeds my page margin. I found this Change colors of the rules in minitoc and this can be used to change the bottom rule. But how to change the top ...
user248960's user avatar
0 votes
0 answers
114 views

Package minitoc Warning: W0010 No file output.toc. NINITOCS NOT PREPARED

I'm writing a latex document and I would like to add a table of contents. I have used the following code: %%%%% MINI TABLES \dominitoc % include a mini table of contents %\dominilof % include ...
Grendel26's user avatar
0 votes
0 answers
38 views

Hyperref Warning & Minitoc

About this code, Overleaf warns me with this message: Package hyperref Warning: Difference (2) between bookmark levels is greater than one, level fixed on input line 49. Why and how could I correct my ...
Puck's user avatar
  • 1,119
3 votes
1 answer
125 views

Minutes Package: Display the agenda without serifs

I have written a protocol template using the "Minutes" package. I am already quite satisfied with the display, however, the agenda is output with serifs, so in a different character set. ...
Soener's user avatar
  • 41
0 votes
1 answer
56 views

How to make mini table of contents unbolded

The standard appearance of \usepackage{minitoc} is with bold letters for each of the sections/subsections of a chapter. How would I go about making a mini table of contents with unbolded letters? ...
John Lagoona's user avatar
4 votes
0 answers
44 views

titleformat and parttoc

I would like to have a parttoc on the first page of the part but I would like to be able to change the style of the part title. Can someone help me please ? I need to run this : \documentclass[12pt,...
Claire's user avatar
  • 41
1 vote
1 answer
69 views

Alignment of MiniToc inside node

I am using tikz to customise my miniToc at each chapter. however I am having problems with the alignment of the TOC inside the node. I have used \begin{flushright} inside the minipage, also to use \...
Choguerrero's user avatar
0 votes
1 answer
52 views

Errors with mini toc in scrbook

This may look like a very silly question, but I honestly have no idea what stupid mistake I have in my files. I am using this template. The template is filled in with lipsum text, and it does not show ...
Choguerrero's user avatar
0 votes
1 answer
110 views

Create section-level toc in a KOMA-script document with tcolorbox and tocbasic library

I just trying to create TOC for every chapter. Therefore I created a command \setchaptertoc according to the question 517733. The problem appears when chapter contains too much section. In that case ...
JardaFait's user avatar
  • 3,836
1 vote
0 answers
72 views

In chapter minitoc, how do I increase the distance between the top rule and the listing of the first entry?

This is what my minitoc looks like: https://www.dropbox.com/s/wxr92dab4eccwis/mintoc.png. I would like to increase the distance between the top rule and the first entry to be the same as the distance ...
mk9y's user avatar
  • 299
0 votes
0 answers
16 views

Conflict with musixtex package [duplicate]

In this code \PassOptionsToPackage{svgnames, x11names}{xcolor} \documentclass{book} \usepackage[T1]{fontenc} \usepackage{lmodern} \usepackage[italian]{babel} \usepackage[utf8]{inputenc} \usepackage[...
Puck's user avatar
  • 1,119
1 vote
1 answer
108 views

How to fix the absolute position of minitoc on the chapter title page?

I am using minitoc below every chapter title in my document. However, depending on the size of the chapter title, minitoc shifts down. This does not look great since my chapter titles differ in size, ...
naughty_waves's user avatar
-1 votes
1 answer
148 views

minitoc at beginning of every chapter

I want to have a mini table of contents for the current chapter appear just after the chapter name listing all sections of that chapter. I do this command before th begin of the document : \usepackage{...
CHAIMAE HAFID's user avatar
1 vote
1 answer
126 views

DocumentClass-Independent Table of Contents (eToC)

I want to create a local table of contents, and am currently using etoc. I noticed that the formatting is largely dependent of the documentclass. Below is a screenshot for the article document class ...
Otanan's user avatar
  • 135
1 vote
1 answer
365 views

minitoc not appearing

Here is a small example of what I am trying to do: \documentclass[a4paper]{report} \usepackage{lipsum} \usepackage[english]{babel} \usepackage[utf8x]{inputenc} \usepackage{float} \usepackage{amsmath} ...
Afaf's user avatar
  • 169
0 votes
1 answer
48 views

Minitoc with hyperref and \sectounter{section}{0} leads to wrong section

I have the following issue with minitoc: I have a first numbered chapter with sections 1 and 2 and a second unnumbered chapter with sections 1 and 2 (sections reset with \setcounter{section}{0}). As ...
RoussillonB's user avatar
0 votes
1 answer
152 views

minitoc don't appear in chapter

the minitoc do not appear in the chapters. Somebody knows where I went wrong? Here is my preamble \documentclass[a4paper,12pt,oneside]{book} \usepackage{lmodern} \usepackage[francais]{babel} \...
Elysée Kouassi's user avatar
0 votes
2 answers
60 views

Two Errors in this code: Why and significance

Overleaf tells me that there are 2 Errors in this code: \documentclass{book} \usepackage[english]{babel} \usepackage[utf8]{inputenc} \usepackage[a4paper,top=3cm,bottom=3cm,left=1.5cm,right=1.5cm]{...
Puck's user avatar
  • 1,119
0 votes
1 answer
125 views

Delete section* from minitoc

I have this problem: as you can see I'd like to delete "\section*{Prefazione alla Prima Parte}" from chapter 1's minitoc. How could I do? Does a MWE serve? Thank you and Best Regards \...
Puck's user avatar
  • 1,119
0 votes
1 answer
116 views

The \tableofcontents in \tcolorbox without title=Contents

About this photo, I'd like that (1) the numbers (I, 1, 1.1, 1.1.1, II, 2, 2.1, 2.1.1) and relative pagenumbers have the same size and color of what represent, i.e. (I ... First Example Part ... 3 must ...
Puck's user avatar
  • 1,119
0 votes
1 answer
63 views

How can I use all vertical spacing in a Chapter page?

A while ago I found a way to format the contents of a Chapter page. However, I haven't found a way to use all of the page space for the minitoc and Chapter Title altogether. Here's a portion of what ...
Thesevs's user avatar
  • 75
1 vote
1 answer
89 views

Text width minitoc in two column document

I would like to have a minitoc in my two column document, utilising the full width of one column. How do I achieve this? See attached a MWE and the red box in the figure below which indicates the ...
Thomas's user avatar
  • 116
0 votes
1 answer
172 views

Minitoc Entry Font

I am trying to make a minitoc, but the whole document is in an unusual font (specifically This one if it matters). I have managed to get everything else right, but the entries of the \minitoc are in ...
Brandon Myers's user avatar
1 vote
1 answer
399 views

minitoc not work

I try to use minitoc but I don't get the style like I want : here the code : \documentclass[12pt, twoside, openany]{book} \usepackage{mathptmx} \usepackage[spanish, es-tabla]{babel} \usepackage[...
youssef115's user avatar
0 votes
1 answer
88 views

Tex: How do I move chapter headings up in mini table of content of parts

%---------------------------------------------------------------------------------------- % MINI TABLE OF CONTENTS IN PART HEADS %---------------------------------------------------------------------...
DHANANJAY SINGH 18110047's user avatar
2 votes
1 answer
132 views

Problem pagestyle for toc and minitoc for thesis [closed]

I have a problem with my document. I looked on Google but did not find the solution. I just want to homogeneize my page style in my whole document but it does not work for my table of content and my ...
Tagouzi's user avatar
  • 31
2 votes
1 answer
233 views

How to obtain a minitoc with classicthesis?

Suppose you want to write a report with a local TOC at the beginning of each chapter. This can be obtained with the minitoc package. MWE: \documentclass[a4paper]{report} \usepackage{minitoc} %\input{...
Karlo's user avatar
  • 3,195
1 vote
1 answer
179 views

How to insert a page break in a minitoc but not in toc?

I would like to insert a page break in a minitoc of a chapter between two subsections but I don't want it in the global toc at the beginning of the document. Any idea how I could achieve this ? Here ...
nlair's user avatar
  • 329
0 votes
1 answer
89 views

Index of contents compressed

The Latex toc is structured by default on several lines: each line of text represents the single chapter, or section, or subsection, while the paragraph indents distinguish the various levels of the ...
cicciocontini's user avatar
0 votes
0 answers
76 views

Unable to use references in ToC names with minitoc

I'm trying to customize minitoc-generated ToCs by changing their titles, in order not to have way too much 'Contents' page around my book. However, when I try to use \mtcsettitle using references, the ...
bissim's user avatar
  • 23
2 votes
1 answer
94 views

The aeb-minitoc package not found

This the first question about this package. The aeb-minitoc package used to build a table of contents. here is the link:https://www.ctan.org/tex-archive/macros/latex/contrib/aeb-minitoc The code ...
Mamoun Mohammed's user avatar
1 vote
0 answers
100 views

How to add or reduce the vertical space between lines in the TOC?

I'm using titletoc to produce the TOC of the whole book, and using minitoc to produce the TOC of each Chapters. Can I assign some different style to the subsection style of book TOC and Chapter TOC? ...
xaero's user avatar
  • 449
2 votes
1 answer
148 views

How to use minitoc with babel-hungarian?

I'm trying to use the minitoc package in a document with babel (Hungarian). This is a minimal example: \documentclass{report} %\usepackage[hungarian]{babel} \usepackage[utf8]{inputenc} \usepackage[T1]{...
Botond Balázs's user avatar
1 vote
0 answers
358 views

Adding Section without Number to Minitoc using \mtcaddsection?

I'm trying to get the below code to work, but I'm not sure what I'm doing wrong. \section*{ASTERISK SECTION} \mtcaddsection[ASTERISK SECTION] I can get \mtcaddchapter[ASTERISK CHAPTER] to add that to ...
Matt P's user avatar
  • 31
1 vote
1 answer
198 views

Minitoc Chapter and Title on Same Line and Centered. Center TOC, also

MWE: \documentclass[11pt,oneside]{book} % [text size]{document type} \usepackage[utf8]{inputenc} \usepackage{graphicx} \usepackage{fancyhdr, blindtext} %for testing \usepackage{minitoc} % Get chapter ...
Matt P's user avatar
  • 31
1 vote
1 answer
227 views

automatic \minitoc?

I want to create a template for a team of writers that will provide automatic minitoc generation such that they will not need to manually add a \minitoc at the beginning of every chapter. Can anyone ...
Ron's user avatar
  • 301
0 votes
1 answer
218 views

Misplaced minitoc

I am struggling to use minitoc when I have a starred chapter before the TOC (that I want to appear in the TOC). In the following MWE, the minitoc of Chapter 1 appears under Chapter 2, despite I used \...
user avatar
1 vote
0 answers
67 views

Remove chapter level indentation from minitoc within chapter

It seems to me that there is an imbalance (in the distribution of ink) on a minitoc which is placed within a chapter; the minitoc appears to be somewhat shifted to the right. I suspect that this is ...
John Chris's user avatar
0 votes
1 answer
195 views

change style for a specific chapter

how to make that introduction in the middle,bigger ? like this \documentclass[12pt,a4paper]{report} \usepackage[english,french]{babel} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} \usepackage[...
Lorain M's user avatar

1
2 3 4 5