Stack Exchange Network

Stack Exchange network consists of 174 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Visit Stack Exchange

Questions tagged [minted]

{minted} is a package that facilitates expressive syntax highlighting in LaTeX using the powerful Pygments library. The package provides options to customize the highlighted source code output using {fancyvrb}. You'll need to install the Python package Pygments (e.g using pip install Pygments). ...

1
vote
1answer
22 views

How to put source code alongside its number inside table

I have to put the source code with this kind of format inside my report. I've read other questions. Most of them are just putting listing or minted inside tabular environment. But not the source code ...
1
vote
0answers
18 views

How to keep formating when copy-paste code sections with minted?

I am using the minted package for syntax highlighting code in my slides, but I have some problem to make this code easily copyable directly from the PDF to the console. it seems that the whitespaces ...
0
votes
0answers
19 views

How to setup multiple listing environment names

It works with one environment name. But failed with two names and above. MWE: \documentclass{report} \usepackage[top=3cm,bottom=3cm,left=4cm,right=3cm]{geometry} \usepackage{caption} % add ability ...
3
votes
1answer
28 views

iftoggle with minted

I have a problem with the minted package in combination with etoolbox's iftoggle. It should be related (or basically be the same error) to this beamer question: minted environment in frame causes ...
0
votes
0answers
36 views

Encoding problem?

I use a minimal code example with Julia \documentclass{article} \usepackage[cache=false]{minted} \begin{document} \inputminted{julia}{polynomial_regression.jl} \end{document} on # Polynomial ...
1
vote
1answer
68 views

How can i write my python code in LaTeX document?

Hope you are fine! in this opportunity I'd like to ask you how can I put in my LaTeX document a python code, I was using, lsting, and anothers but I have an error, I appreciate your helping. My error ...
1
vote
1answer
26 views

Adjust top and bottom margins using minted

I've been using the listings package with the following setup to produce a compact layout of code samples: \lstset{ basicstyle=\footnotesize\ttfamily,breaklines=true, framextopmargin=50pt,...
0
votes
0answers
11 views

Minted frozencache option throwing error without shell escape

I am using the minted package for code highlighting in my document. However, when I run it to compile my code using shell -escape my citations and hyperlinks don't compile. I need to run my tex file ...
0
votes
1answer
21 views

How to load custom minted lexer from file with czech babel

I would like to distribute my own lexer with latex sources. I use: \begin{minted}{myLexer.py:MyLexerClassName -x} setMinAndMax \end{minted} which works fine. But when I use czech babel, compilation ...
0
votes
0answers
21 views

minted ignored page break

I use minted with this additional config to support label and caption. But There are some broken minted page that ignored page break and override the page number But other minted are fine This is ...
12
votes
1answer
289 views

Unwanted space in inline code with minted in beamer

Why is there a space between \documentclass and {article} in my inline code? There are no errors in the log. % arara: pdflatex: { shell : yes } \documentclass{beamer} \usepackage{minted} \newminted{...
0
votes
1answer
19 views

Conflict between \captionof and mdframed

I'm using the minted package to generate highlighted code snippets. Because I want all minted environments to be wrapped with mdframed, I added the following to the preamble. \usepackage{mdframed} \...
2
votes
1answer
59 views

Automatic line breaking in minted

I'm using the minted package to generate syntax-highlighted code snippets. The listing I want to show has some lines that overflow, though. Minted can automatically handle line breaks with the ...
3
votes
1answer
135 views

How do I set a background color and font for inline verb text?

I wish to customize the verb command such that I can customize the font and color, as well as set a rounded colored rectangle as background. I found this in the Tcolorbox manual: \DeclareTotalTCBox{\...
0
votes
0answers
20 views

match line spacing in different minted code snippents

I want to compare pseudo-code snippets from 2 made up languages side by side. I matched them in number of lines but the line spacing is different, so the lines are not aligned 1:1 even though they ...
3
votes
1answer
71 views

Advanced customization of Minted code?

I'm a newbie to LaTeX, especially the minted package. I would like to customize it such that the code has a similar style to the attached screenshot. Specifically, I wish to be able to customize: The ...
0
votes
1answer
22 views

Errors after upgrading OS and Lyx

I use Lyx everyday. Yesterday I decided to format my computer and install Xubuntu 18.04 (I had Xubuntu 16.04). After installing Lyx I am getting this errors: Although the errors, the PDF is properly ...
3
votes
1answer
45 views

workaround for minted environments in in Beamer notes

A work around for adding code to beamer notes is described here: LaTeX beamer: Code listings in notes. Here is how I've adapted it for use with Minted: \documentclass{beamer} \setbeameroption{show ...
0
votes
0answers
41 views

Trying to use minted package and getting error “Package minted Error: You must invoke LaTeX with the -shell-escape flag.” [duplicate]

I am using Windows 8.1, MiKTeX 2.9, TeXstudio. Everything including packages are fully updated. I am trying to compile this: \documentclass{article} \usepackage{minted} \begin{document} \end{...
0
votes
2answers
31 views

How to let \listoflistings of minted use subsection's subheading and appear in TOC?

I want the \listoflistings of minted to appear as a subsection heading. (My \documentclass is scrartcl.) Things like \printbibliography have a "heading" option, which you can use to define, which ...
1
vote
1answer
27 views

How to remove minted indentation level with correct latex indentation?

When writing with minted code snippets I dislike to remove indentation in latex source, so correct results are generated. Is there a way to substract latex indentation-level from minted indentation? I ...
0
votes
1answer
18 views

How can I make such an environment with '"minted'?

How can I make such an environment: \documentclass[a4paper,12pt]{report} \usepackage{minted,fancyvrb} \newenvironment{mycode}[1]{ \begin{listing} \begin{minted}{bash}}{ \end{minted} \...
2
votes
1answer
38 views

Forcing mintinline background to have the height of the line

I'm having trouble with \mintinline, because I am using a black background for it, and the characters render in a way that I find unpleasing. Namely, when doing something like: \documentclass{article}...
3
votes
1answer
39 views

Why is the # character duplicated in footnotes?

I've run into a weird issue related to footnotes. When I compile the document I pasted below, the "regular" #import statement is shown exactly as it appears in the source code. However, when I use ...
0
votes
0answers
35 views

How can I prevent the minted environment to highlight the code? [duplicate]

I'm writing a LaTeX document and I'm using the minted package to highlight the code. This is what I've written: \documentclass{report} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage[...
4
votes
0answers
58 views

One tcbcolorbox with alternative color in different lines

\documentclass{article} \usepackage{geometry} \geometry{left=2.5cm,right=2cm,top=2.5cm,bottom=2.5cm} \usepackage{fontawesome} \usepackage{varwidth} % tcolorbox \usepackage[dvipsnames, svgnames]{xcolor}...
2
votes
0answers
53 views

A weird box in the code styled with minted [closed]

I use minted to style my codes in a document. But in some cases, there is a weird box in the code in which most of the time a quotation mark is encircled. The following MWE shows my problematic ...
3
votes
1answer
48 views

pass parameter #1 to minted's \mintinline, when #1 begins with `#`

I noticed the following unexpected (by me!) behaviour, illustrated by this MWE and its output in the figure below: % arara: xelatex: { shell : yes } \documentclass[11pt]{article} \usepackage{...
0
votes
1answer
60 views

A single column Listing with Minted into a two column layout document?

I have a two column document: \documentclass[twocolumn]{elsarticle} \usepackage{minted} \usepackage{caption} \captionsetup[listing]{position=top} \usepackage{listings} \begin{document} \begin{...
2
votes
1answer
73 views

Minted variables alone vs in expressions being colorized differently

We are using minted for a paper. Variable/function names are being colorized when they stand alone in inline expressions, but not when they are part of arithmetic expressions. For example, the n and ...
0
votes
1answer
41 views

minted - how to highlight html also, when language “twig” is selected

I use minted and I try to format twig-Code. But when I select twig as the code-language, it does highlight the twig code but it doesn't highlight html-code! This looks like this: Is there any way to ...
2
votes
1answer
57 views

tikz with beamer inside minted

I'm trying to define a tikz node inside a minted frame. I have the following MWE: \documentclass[tikz, xcolor={svgnames}, aspectratio=43]{beamer} \usepackage{minted} \usepackage{tikz} \...
1
vote
1answer
598 views

Package minted Error: Missing Pygments output [closed]

I installed minted today as well as Python and Pygments, which I can run from the cmd. When I try this code \documentclass{article} \usepackage{minted} \begin{document} \begin{minted}{c} int main() {...
2
votes
0answers
48 views

Read out text file until first empty line is found [closed]

Im currently writing a manual for a package and wanted to include parts of a Matlab file. I was able to display the whole file with the listings package but my goal is to only display the first part ...
1
vote
1answer
89 views

Top alignment of listings in a tabu/tabularx-environment - lstlisting/minted in a table

I want to insert code snippets into a tabular environment. For the Code snippets I'm using the package listing and to insert it into a tabular environment I put the code into a box. To get linebreaks ...
0
votes
1answer
107 views

texify.exe in TeXworks in MSWindows 10: MiKTex encountered internal error when compile with --shell-escape

I try to compile a tex text using the minted package using TeXworks and choosing the option XeLaTex+MakeIndes+BibTeX. When i try to build as is I get the error: ! Package minted Error: You must ...
3
votes
1answer
103 views

tcolorbox + minted: a box always starts on a new page/column leaving a big empty space

I'm trying to write a command to insert a boxed listing that break across pages. To this goal I'm trying to use minted for prettyprinting the listing and tcolorbox for creating the boxes (but I've ...
1
vote
1answer
42 views

Correct loading order of package newfloat along with hyperref and algorithmic packages?

There is extensive documentation that hyperref must be loaded towards the end. In particular, the following is the correct loading order for these specific packages: \usepackage{float} \usepackage{...
0
votes
1answer
109 views

include sql files and use minted for highlighting

I write in latex a documentation about a database project. I would like to include some sql files in my latex document and highlight this files with minted. My initial approach is the following, ...
0
votes
1answer
87 views

Loading tcolorbox with the minted option breaks tikzexternalize and results in compilation error with makeglossaries

I have a weird problem that has now been localised to either of the lines: \usepackage[minted]{tcolorbox} \makeglossaries{} in my preamble. I am using luatex with shell-escape enabled (for minted). ...
2
votes
1answer
46 views

Cleveref does not change its string even after changing minted's listing environment caption name

I am using the minted package's listing environment to typeset MATLAB source code. As explained in the minted manual, I have used the \SetupFloatingEnvironment{listing}{name=Program code} option to ...
2
votes
1answer
75 views

How to escape to latex within minted comments?

I am using the minted package for typesetting matlab source code. There is an escapeinside option for the listing environment provided by minted to escape to regular TeX commands. However, this does ...
0
votes
1answer
77 views

Minted doesn't break the line at the desired character

I'm writing a document using minted. I installed Python, pygmentize, everything works great. But there is a behaviour I don't understand. I want to break the text inside the minted environment at the ...
1
vote
1answer
108 views

Custom name of listing in list of listings with minted not working

I am using the minted package to highlight source code and also to add a list of listings. My code already looks like it should: \begin{listing}[hb] \inputminted[frame=single,linenos]{c}{code/...
4
votes
1answer
96 views

Breaking pages in minted package

The total line number of my code is larger than the line number of the page, in minted, there is a breaklines option but it seems to breaks lines exceed the length of page line. \documentclass[12pt]{...
0
votes
1answer
131 views

TexMaker minted package, there is no output in pdf file

The minted package was used but the code blocks did not appear in the pdf file in TexMaker \usepackage[cache=false]{minted} \begin{minted}[mathescape, linenos, ...
1
vote
1answer
62 views

With pdflatex and the minted package, how do I eliminate whitespace and include entire document?

I'm using tex because it seems to be the most appropriate tool for my workflow... I'm making posters to teach computer programming, these need to be full of syntax-highlighted code. I have a ...
0
votes
1answer
440 views

Pygmentize not installed error on Visual Studio Code

I have been using VS Code + Latex Workshop for the last year and so to write up my tex documents however today I tried using the minted package which I have installed in /usr/local/bin/pygmentize In ...
0
votes
1answer
54 views

Missing \endgroup inserted when using \mint in caption?

I'm using minted for code syntax highlighting in my document and it's been working great: In my caption, I want to refer to some variables and format them: \begin{figure} \inputminted{js}{...
3
votes
1answer
27 views

Listing Code Snippet goes under page numbering

\begin{listing}[p] \centering \inputminted[linenos, frame=lines, firstline=46, lastline=93]{python}{Codes/MyCode.py} \caption{Part 1 Of Feature Extraction Python Code} \label{listing:Feat} \end{...